Philips CGA5722 User Manual

How to upgrade the CGA5722 Wireless Base Station firmware
The last CGA5722/00 and CGA5722/05 firmware which can
be downloaded from Philips website is: V 0.69
Για CGA5722N/TE,CGA5720N/TE,CGA3600/TE, παρακαλώ ελέγξτε σε αυτόν τον ιστοχώρο: LINK For CGA5722/62, please check on this website: LINK
CGA5722/62 için, şu web sitesine göz atın: LINK
This How-to manual will answer the following questions:
1. Why should I upgrade my CGA5722 firmware?
21. How do I know which firmware version I have in my CGA5722?
3. How do I know what the latest firmware is?
4. How do I upgrade to the latest firmware?
5. Your CGA5722 Wireless Base Station firmware is now upgraded.
Page 1 of 7
How to upgrade the CGA5722 Wireless Base Station firmware

1. Why should I upgrade my CGA5722 firmware?

• To add new functionality or to fixes some issues.
Issues Problems fixed:
- Synchronisation issue of Huawei DSLAM.
- Not possible to set MER (Mac Encapsulated Routing) with UCP protocol( CD install )

2. How do I know which firmware version I have in my CGA5722?

Make sure your PC is connected to your Wireless Base Station (either by Wi-FI or by Ethernet)

2.1 Determine the IP address of your CGA5722 Wireless Base Station.

Click on your PC Start => Run
The Default Gateway shows the IP address of the Wireless Base Station (192.168.2.1 in this example).
Type cmd and click OK.
type ipconfig followed by Enter.
Page 2 of 7
How to upgrade the CGA5722 Wireless Base Station firmware
2.2 Browse to your CGA5722 Wireless Base Station.
Open Internet Explorer and type the Default Gateway address (192.168.2.1 in this example) in the Address
bar.
Click “GO”.
You should now see the setup page.

2.3 On the Home network Setting page, click on Status and you can find the firmware version.

Page 3 of 7
Loading...
+ 4 hidden pages