Page 1
CD6550_QSG_EN.fm Page 1 Tuesday, April 14, 2009 5:29 PM
Register your product and get support at
www.philips.com/welcome
Call from the phonebook
1. Press d in idle mode.
2. Scroll
: to a phonebook entry.
3. Press
r or v key.
The call is initiated.
Troubleshooting
For more information, please refer to the User Manual that came with your
phone.
Problem Solution
• There’s no dialling tone! • Check the connections
• Caller cannot hear me
clearly!
SEARCHING... is
•
displayed on handset and
icon is blinking!
• Caller number is not
displayed!
• Charge the batteries
• Use the line cable provided
• Move closer to the base station
• Move the base station at least one metre away
from any electrical appliances
• Move closer to the base station
• Reset your unit and restart the handset registration
• Check your subscription with your network
operator
Welcome to Philips!
Register your product and get support at
www.philips.com/welcome
Need help?
User Manual
Refer to the User Manual that came with your new phone.
Online help
www.philips.com/support
©2008 Koninklijke Philips Electronics N.V.
All rights reserved.
Reproduction in whole or in part is prohibited without the written
consent of the copyright owner.
Document number: 3111 285 50381 (EN) Printed in China
Quick start guide
Connect
1
Install
2
Enjoy
3
CD6550
Page 2
CD6550_QSG_EN.fm Page 2 Tuesday, April 14, 2009 5:29 PM
What’s in the box
Handset
NiMH batteries
Guarantee
Charger
Power supply2 AAA rechargeable
Quick Start Guide
Battery door
User manual
Connect
1
Connect the charger
1. Place the charger in a central location near the electricity socket.
2. Connect the power cable to their corresponding connectors at the bottom of the
charger as shown.
Install
2
Insert rechargeable batteries and charge
Insert batteries Charge handset for 24 hours
A
Registering your additional handset
Additional handsets must be registered to the base station before you can use them.
1. On the base station, press and hold
2. Within 10 seconds, press
SETTINGS and press mSELECT, scroll : to REGISTRATION and press
mSELECT.
3. Enter the master PIN (default is 0000) when prompted and press
4.
WAITING_ _ is displayed on the screen.
M key on the handset. Scroll : to ADVANC.
B
p for approximately 5 seconds.
mOK to confirm.
Enjoy
3
Make a call
Dial the number (maximum 24 digits) and press r or v key.
OR
Press
r or v key to take the line and dial the number (maximum 24 digits).
Answer a call
When the phone rings, press r or v key.
End a call
To end a conversation, press e key.
Adjust earpiece volume
During a call, press : to select from VOLUME 1, VOLUME 2 or VOLUME 3.
Set the ring melody
1. Press M in idle mode, scroll : to PERSONAL SETTING and press
mSELECT, scroll : to HANDSET TONES and press mSELECT, scroll :
to RING TONES and press mSELECT.
2. Scroll
: to your desired melody to play the melody.
3. Press
mSELECT to set the ring melody.
A validation tone is emitted and the screen returns to previous menu.
Store a contact in the phonebook
1. Press M key in idle mode, scroll : to PHONEBOOK and press mSELECT,
press
mSELECT to enter NEW ENTRY.
2. ENTER NAME is displayed on the screen.
3. Enter the name of the contact (maximum 14 characters) and press
4. Enter the phone number (maximum 24 digits) and press
A validation tone is emitted.
Access the phonebook
1. Press d in idle mode and scroll : to browse the phonebook.
2. To view the details, press
mSELECT.
mOK.
mOK.
Loading...