Philips CD6501B/90, CD650 User Manual

Download

Page 1

EN Telephone

Warning

Use only rechargeable batteries. Charge the handset for 24 hours before use.

CD650

www.philips.com/welcome

CD650_IFU_EN_UK.book Page 1 Monday, June 23, 2008 3:42 PM

Page 2

CD650_IFU_EN_UK.book Page 2 Monday, June 23, 2008 3:42 PM

Page 3

Table of contents 1

1Important 3

1.1 Power requirements 3

1.2 Safety Information 3

1.3 Conformity 4

1.4 Using GAP standard compliance 4

1.5 Recycling and disposal 4

1.6 Electric, Magnetic and Electromagnetic Fields (“EMF”) 5

2 Your phone 6

2.1 What’s in the box 6

2.2 Overview of your phone 7

2.3 Display icons 9

2.4 Menu icons 9

2.5 Overview of the base station 10

3 Getting started 11

3.1 Connect the base station 11

3.2 Wall mounting the base 11

3.3 Install your phone 12

3.4 Welcome mode 13

3.5 Menu structure 14

4 Using your phone 17

4.1 Make a call 17

4.2 Answer a call 17

4.3 End a call 18

5 Use more of your phone 19

5.1 Switch the handset on/off 19

5.2 Keypad lock/unlock 19

5.3 Text or number entry 19

5.4 Call in progress 19

5.5 Call waiting 20

5.6 Caller Line Indentification 21

5.7 Using your Phonebook 21

5.8 Using the Redial list 23

5.9 Using the Call log 24

5.10 Using the Intercom 25

5.11 Paging 26

6 Personal settings 27

6.1 Change the Handset Name 27

6.2 Handset Tones 27

6.3 Change the Display Language 28

6.4 Set Wallpaper 28

6.5 Set Colour Theme 28

6.6 Set Contrast Level 28

6.7 Set Backlight time 28

6.8 Activate /Deactivate Auto Hang-up 29

7 Clock and Alarm settings 30

7.1 Set date and time 30

7.2 Set date/time format 30

Table of contents

CD650_IFU_EN_UK.book Page 1 Monday, June 23, 2008 3:42 PM

Page 4

2Table of contents

7.3 Set alarm 31

7.4 Set alarm tone 31

8 Advanced settings 32

8.1 Easy Call 32

8.2 Activate/Deactivate Conference mode 32

8.3 Call Barring 32

8.4 Activate/Deactivate XHD Sound mode 33

8.5 Change master PIN 33

8.6 Registration 34

8.7 Unregister a handset 35

8.8 Country Selection 35

8.9 Reset Unit 35

8.10 Default settings 36

8.11 Set Auto Prefix 36

8.12 Change Recall time 36

8.13 Change the Dial Mode (country-dependent) 37

8.14 Set first ring 37

9 Network Services 38

9.1 Call Forward 38

9.2 Voice Mail 39

9.3 Call Return 39

9.4 Cancel Call Back 39

9.5 Withhold ID 40

10 SMS 41

10.1 Write and send new SMS 41

10.2 View Inbox messages 42

10.3 Save a message in the Draft box 44

10.4 SMS settings 45

11 Technical data 47

12 Frequently asked

questions 48

13 Index 51

CD650_IFU_EN_UK.book Page 2 Monday, June 23, 2008 3:42 PM

Page 5

Important 3

1Important

Take time to read this user manual before you use your phone. It contains important information and notes regarding your phone.

1.1 Power requirements

• This product requires an electrical supply of 220-240 volts AC. In case of power failure, the communication can be lost.

• The Electrical network is classified as hazardous. The only way to power down the charger is to unplug the power supply from the electrical outlet. Ensure that the electrical outlet is always easily accessible.

• The voltage on the network is classified as TNV-3 (Telecommunication Network Voltages), as defined in the standard EN 60-950.

Warning

To avoid damage or malfunction:

• Do not allow the charging contacts or the battery to come into contact with metal objects.

• Do not open it as you could be exposed to high voltages.

• Never use any other battery than the one delivered with the product or recommended by Philips: risk of explosion.

• Always use the cables provided with the product.

1.2 Safety Information

• Handsfree activation could suddenly increase the volume in the earpiece to a very high level: make sure the handset is not too close to your ear.

• This equipment is not designed to make emergency calls when the power fails. An alternative has to be made available to allow emergency calls.

• Do not expose the phone to excessive heat caused by heating equipment or direct sunlight.

• Do not drop your phone or allow objects to fall on your phone.

• Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasives as these may harm the set.

• Do not use the product in places where there are explosive hazards.

• Do not let small metal objects come into contact with the product. This can deteriorate audio quality and damage the product.

• Do not allow the charger to come into contact with liquids.

• Active mobile phones in the vicinity may cause interference.

About operating and storage temperatures:

• Operate in a place where temperature is always between 0 and 35º C (32 to 95º F).

• Store in a place where temperature is always between -20 and 45º C (-4 to 113º F).

• Battery life may be shortened in low temperature conditions.

CD650_IFU_EN_UK.book Page 3 Monday, June 23, 2008 3:42 PM

Page 6

4Important

1.3 Conformity

We, Philips declare that the product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. This product can only be connected to the analogue telephone networks of the countries mentioned on the packaging. You can find the Declaration of Conformity on www.p4c.philips.com.

1.4 Using GAP standard compliance

The GAP standard guarantees that all DECT

GAP handsets and base stations comply with a minimum operating standard irrespective of their make. Your handset and base station are GAP compliant, which means the minimum guaranteed functions are: register a handset, take the line, receive a call and dial.The advanced features may not be available if you use another handset than a CD650/655 with your base station. To register and use your CD650/655 handset with a GAP standard base station of a different make, first follow the procedure described in the manufacturer’s instructions, then follow the procedure described on page 34. To register a handset of another make to the CD650/655 base station, place the base station into registration mode (page 34), then follow the procedure in the manufacturer’s instructions.

1.5 Recycling and disposal

Disposal instructions for old products: The WEEE directive (Waste Electrical and Electronic Equipment Directive ; 2002/96/EC) has been put in place to ensure that products are recycled using best available treatment, recovery and recycling techniques to ensure human health and high environmental protection. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. Do not dispose of your old product in your general household waste bin. Inform yourself about the local separate collection system for electrical and electronic products marked by this symbol.

Use one of the following disposal options:

• Dispose of the complete product (including its cables, plugs and accessories) in the designated WEEE collection facilities.

• If you purchase a replacement product, hand your complete old product back to the retailer. He should accept it as required by the WEEE directive.

CD650_IFU_EN_UK.book Page 4 Monday, June 23, 2008 3:42 PM

Page 7

Important 5

Disposal instructions for batteries:

Batteries should not be disposed of with general household waste.

Packaging information:

Philips has marked the packaging with standard symbols designed to promote the recycling and appropriate disposal of your eventual waste.

A financial contribution has been paid to the associated national recovery & recycling system. The labelled packaging material is recyclable.

1.6 Electric, Magnetic and Electromagnetic Fields (“EMF”)

1. Philips Royal Electronics

manufactures and sells many consumer oriented products which usually, as with any electronic apparatus, have the ability to emit and receive electro magnetic signals.

2. One of Philips' leading Business

Principles is to take all necessary health and safety precautions for our products, to comply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the products.

3. Philips is committed to develop,

produce and market products that cause no adverse health effects.

4. Philips confirms that if its products

are handled properly for their intended use, they are safe to use according to scientific evidence available today.

5. Philips plays an active role in the development of international EMF and safety standards, enabling Philips to anticipate further developments in standardisation for early integration in its products.

CD650_IFU_EN_UK.book Page 5 Monday, June 23, 2008 3:42 PM

Page 8

6 Your phone

2 Your phone

Congratulations on your purchase and welcome to Philips!

To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.

2.1 What’s in the box

Note

*You may find in the box the line adaptor delivered separately from the line cable. In this case, you have to connect the line adaptor to the line cord first before plugging the line cord to the line socket.

In multihandset packs, you will find one or more additional handsets, chargers with power supply units and additional rechargeable batteries.

Handset Base station Battery door

2 AAA rechargeable

batteries

Power supply Line cord*

User manual Guarantee Quick Start Guide

CD650_IFU_EN_UK.book Page 6 Monday, June 23, 2008 3:42 PM

Page 9

Your phone 7

2.2 Overview of your phone

AEarpiece BEvent LED

Blinks when there is a new missed call, SMS or Voicemail.

Note

If you have not subscribed to Caller Line Identification service, there will not be any alerts for new events. Hence, the event LED will not blink when there is a new call, SMS, or voicemail.

CDisplay

See page 9 for an overview of the display icons.

D Left Softkey

Select the function displayed on the handset screen directly above it.

During a call: Initiate a second call, consult phonebook, transfer a call or activate/ deactivae XHD sound mode. Switch on the backlight.

E Right Softkey

Select the function displayed on the handset screen directly above it. Switch on the backlight.

F Navigation keys

In idle mode: Scroll up to access the Call log and scroll down to access the Phonebook. During a call: Scroll up/down to increase or decrease earpiece and speaker volume. In editing mode: Scroll up/down to go to the previous character or next character. In other modes: Scroll up/down a menu list or go to the previous or next record in the Phonebook, Redial list or Call log.

GTalk key

In idle mode: Answer an incoming external or internal call. During a call: Activate the recall function. In other modes: Dial the selected number in the Phonebook, Redial list or Call log.

H Hang-up key

In idle mode: Long press to switch on/off the handset. During a call: Hang up a call. In other modes: Return to the idle mode.

I Menu key

In idle mode: Go to the main menu.

J Loudspeaker key

In idle mode: Turn on the loudspeaker and dial the number. Answer an incoming call using handsfree mode. During a call: Toggle the loudspeaker on/off.

CD650_IFU_EN_UK.book Page 7 Monday, June 23, 2008 3:42 PM

Page 10

8 Your phone

K Redial key

In idle mode: Access the Redial list.

L Keypad lock key

In idle mode: Insert *. Long press to lock/ unlock the keypad. During a call: Insert *.

M Ringer on/off key &

Pause key

In idle mode: Insert #. Long press to turn the ringer on/off. During a call: Insert #. When predialling: Long press to insert a pause marked “P”. In editing mode: Long press to switch between upper and lower case.

N Mute key

During a call: Mute/Unmute the handset microphone.

O Call transfer key & Intercom /

Conference key

In idle mode: Initiate an internal call. During a call: Hold the line and page another handset. Long press to start a conference between internal and external calls.

P Microphone Q Loudspeaker R Battery door

Danger

Handsfree activation can suddenly increase the volume in the earpiece to a very high level. Make sure the handset is not too close to your ear.

CD650_IFU_EN_UK.book Page 8 Monday, June 23, 2008 3:42 PM

Page 11

Your phone 9

2.3 Display icons

Indicates that the battery is fully charged. Icon blinks during charge and when the battery is low. Indicates that the battery is fully discharged. Indicates that an ex ternal call is connected or held. Icon blinks when receiving an incoming call. Indicates that there are existing SMS messages in the inbox. Icon blinks when there are new voicemail or unread SMS messages.

Displays when there are existing call log records or when call log is accessed. Icon blinks when there are new missed calls. Displays when the alarm clock is activated. Disp lays when the loudspeaker is activated. Disp lays when ringer off is activated.

Indicates that the handset is registered and within range of the base station. Icon blinks when the handset is out of range or is searching for a base.

2.4 Menu icons

Phonebook

Personal set

Clock & Alarm

Advanced set

Network Service

SMS

CD650_IFU_EN_UK.book Page 9 Monday, June 23, 2008 3:42 PM

Page 12

10 Your phone

2.5 Overview of the base station

APaging key

Page handset. Long press to start registration procedure.

CD650_IFU_EN_UK.book Page 10 Monday, June 23, 2008 3:42 PM

Page 13

Getting started 11

3 Getting started

3.1 Connect the base station

Place the

base station in a central

location near the telephone line socket and electricity socket. Connect the line cord and the power cable to their corresponding connectors at the bottom of the base station as shown.

Connect the other end of the line cord to the telephone line socket and the other end of the power cable to the electricity socket.

Note

The line adaptor may not be attached to the line cord. In this case, you have to connect the line adaptor to the line cord first before plugging the line cord to the line socket.

Warning

Avoid placing the base station too close to large metal objects such as filing cabinets, radiators or electrical appliances. This can impair the range and sound quality. Buildings with th ick internal and external walls may impair transmission of signals to and from the base.

Warning

The base station does not have an ON/ OFF switch. Power is applied when the power adaptor is plugged into the unit and connected to the electricity socket. The only way to power down the unit is to unplug the power adaptor from the electricity socket. Therefore, ensure that the electricity socket is easily accessible. The power adaptor and telephone line cord have to be connected correctly, as incorrect connection could damage the unit.

Always use the telephone line cord supplied with the unit. Otherwise, you may not get a dial tone.

3.2 Wall mounting the base

The base is designed to support wall mounting. To wall mount the base, follow the instructions below.

Warning

Other wall mounting methods are not recommended and may damage the product.

Remove the bracket from the back of the base station.

CD650_IFU_EN_UK.book Page 11 Monday, June 23, 2008 3:42 PM

Page 14

12 Getting started

Turn the bracket upside down and then re-insert the bracket to the back of the base station.

Insert screws (not included) into the wall.

Align the mounting holes on the back of the base with the screws on the wall.

Slide the base down into place.

3.3 Install your phone

Before using the handset, the batteries have to be installed and fully charged.

3.3.1 Install battery

Warning

Always use AAA rechargeable batteries supplied with your unit. There could be risk of battery leakage if you use alkaline batteries or other battery types.

Slide out the battery cover.

Place the batteries in the correct polarity as indicated and replace the cover.

CD650_IFU_EN_UK.book Page 12 Monday, June 23, 2008 3:42 PM

Page 15

Getting started 13

3.3.2 Charge battery

Warning

The handset must be charged for at least 24 hours before using it for the first time. When the battery level becomes low, the low battery sensor alerts you by sounding an audible tone and blinking the battery icon. If the battery level becomes exceedingly low, the phone automatically switches off and any function in progress will not be saved.

Place the handset on the charging cradle of the base station. A melody is emitt ed if the handset is placed correctly. The battery icon on the display blinks during charge. The battery icon becomes steady when the handset is fully charged.

Note

Optimal battery life is reached after 3 cycles of complete charging (over 15 hours) and discharging, allowing approximately 12 hours of talk-time and 150 hours of stand-by time.

3.4 Welcome mode

Note

Depending on your country, the

WELCOME

screen may not appear. In this case, you are not required to select your country/operator/language settings. In the case when

WELCOME

appears on the screen before you first use your handset, you need to configure it according to the country of use.

After charging it for a few minutes, the word

WELCOME

appears in various languages. Follow these steps to configure your phone:

Scroll

: to the word

WELCOME

your preferred language and press

SELECT

to confirm your selection. Scroll

: to your country.

Press

SELECT

to confirm your selection. Press

: to your operator (if

necessary). Press

SELECT

again to confirm your selection.

• The default line settings and menu

language for the selected country will be automatically configured.

• To set date/time, see “Set date and

time” on page 30. Your phone is now ready for use.

Note

You can still make outgoing calls or receive incoming calls without first defining your country selection. The welcome mode will display again after the call.

Tip

You may change your country settings anytime after the first configuration. (see “Country selection” in chapter 8.8) If there are no key presses for 15 seconds, the handset will automatically return to idle mode. It will also return to idle mode automatically when you place the handset back on the base station.

2 3

CD650_IFU_EN_UK.book Page 13 Monday, June 23, 2008 3:42 PM

Page 16

14 Getting started

3.5 Menu structure

The table below describes the menu tree of your phone. Press

M in idle mode to

enter the main menu. Use navigation keys

: to navigate within the menus and press

left softkey

m to enter each option.

PHONEBOOK

NEW ENTRY

LIST

EDIT ENTRY

SELECT MELODY

DELETE ENTRY

DELETE ALL

DIRECT MEMORY KEY 1

...

KEY 9

PERSONAL SETTING

HANDSET NAME

HANDSET TONES RING VOLUME

RING TONE

List of melodies

KEY BEEP ON/OFF

LANGUAGE

List of languages

WALLPAPER

COLOUR THEME COLOUR 1/COLOUR 2/COLOUR3/COLOUR 4

CONTRAST LEVEL 1/2/3/4/5

BACKLIGHT TIME 20 SECONDS/40 SECONDS/60 SECONDS

AUTO HANG-UP ON/OFF

CLOCK & ALARM

SET DATE/TIME

SET FORMAT TIME FORMAT 12 HOURS/24 HOURS

DATE FORMAT DD:MM / MM:DD

ALARM OFF/ON ONCE/ON DAILY

ALARM TONE MELODY 1/MELODY 2/MELODY 3

CD650_IFU_EN_UK.book Page 14 Monday, June 23, 2008 3:42 PM

Page 17

Getting started 15

ADVANC. SETTINGS

EASY CALL MODE ON/OFF

NUMBER

CONFERENCE ON/OFF

CALL BARRING MODE ON/OFF

NUMBER NUMBER 1/NUMBER 2/

NUMBER 3/NUMBER 4

XHD SOUND ON/OFF

CHANGE PIN

REGISTRATION

UNREGISTER

COUNTRY

RESET

AUTO PREFIX DETECT DIGIT

PREFIX

RECALL TIME SHORT/MEDIUM/L ONG

DIAL MODE TONE/ PULSE

FIRST RING ON/OFF

NETWORK SERVICES

CALL FORWARD ACTIVATE/DEACTIVATE/

CHANGE CODE

CALL

FWD BUSY ACTIVATE/DEACTIVATE/

CHANGE CODE

CALL

FWD UNANSW. ACTIVATE/DEACTIVATE/

CHANGE CODE

VOICEMAIL/VOICEMAIL 2 CALL/SETTINGS

INFO 1/INFO 2 CALL/SETTINGS

CALL RETURN CALL/SETTINGS

CANCEL CALL BACK CALL/SETTINGS

WITHHOLD ID ACTIVATE/SETTINGS

CD650_IFU_EN_UK.book Page 15 Monday, June 23, 2008 3:42 PM

Page 18

16 Getting started

SMS

WRITE SMS

INBOX REPLY

FORWARD

SAVE NUMBER

DELETE

DELETE ALL

DRAFTS E DIT

SEND

DELETE

DELETE ALL

SETTINGS SMS RECEPTION ON/OFF

SMS CENTRE SMS CENTRE 1/SMS CENTRE 2/

SMS CENTRE 3

DEFAULT CENTRE SMS CENTRE 1/SMS CENTRE 2/

SMS CENTRE 3

CD650_IFU_EN_UK.book Page 16 Monday, June 23, 2008 3:42 PM

Page 19

Using your phone 17

4 Using your phone

4.1 Make a call

4.1.1 Predialling

Dial the number (maximum 24 digits). Press

r or v key.

• The call is initiated.

Tip

You may insert a prefix number to the beginning of your predial number, see “Set Auto Prefix” on page 36 for more information.

4.1.2 Direct dialling

Press

r or v key to take the

line. Dial the number.

• The call is initiated.

4.1.3 Call from redial list

Press

a key in idle mode.

Scroll

: to an entry in the redial

list. Press

r or v key.

• The call is initiated.

Tip

The handset stores the last 20 numbers dialled. The last number dialled will appear first in the redial list. If the redial number matches a phonebook entry, the name will be displayed instead.

4.1.4 Call from the call log

Press

u in idle mode.

Scroll

: to

CALL LIST

SMS

and

press

SELECT

to enter the respective sub-menus. Scroll

: to an entry.

Press

r or v key.

• The call is initiated.

Note

You need to subscribe to Caller Line Identification service to be able to see the caller’s number or name in the call log (see “Access Call log” on page 24).

4.1.5 Call from the phonebook

Press

d in idle mode.

Scroll

: to a phonebook entry.

Press

r or v key.

• The call is initiated.

Tip

Instead of scrolling

: to browse the

phonebook entries, you can press the numeric key corresponding to the first letter of the entry you wish to locate. For example, pressing

2 will show the

entries starting with A. Pressing

again will show the entries starting with B, etc...

4.2 Answer a call

When the phone rings, press

r key.

• The call is established.

Note

Incoming call has priority over other events. Whenever there is an incoming call, other status in progress such as

1 2

3 4

1 2 3

CD650_IFU_EN_UK.book Page 17 Monday, June 23, 2008 3:42 PM

Page 20

18 Using your phone

phone setting, menu navigation, etc will be aborted.

Danger

When the handset rings during an incoming call, please do not hold the handset too close to your ear, as the volume of the ringing tone may damage your hearing.

4.2.1 Handsfree answering

When the phone rings, press

v key.

• The handset loudspeaker is activated.

Danger

Handsfree activation can suddenly increase the volume in the earpiece to a very high level. Make sure the handset is not too close to your ear.

4.3 End a call

To end a conversation, press

e key.

Tip

AUTO HANG-UP

mode is activated (see “Activate /Deactivate Auto Hangup” on page 29) , you can simply place the handset back to its base station to end the call. This feature is activated by default.

Note

The call duration will be displayed on the handset screen for about 5 seconds.

CD650_IFU_EN_UK.book Page 18 Monday, June 23, 2008 3:42 PM

Page 21

Use more of your phone 19

5 Use more of your

phone

5.1 Switch the handset on/off

Press and hold

e key for 3 seconds to

switch on/off the handset in idle mode.

5.2 Keypad lock/unlock

Press and hold

* key for 2 seconds to

lock/unlock the keypad in idle mode.

5.3 Text or number entry

When you select a field in which you can enter text, you can enter the letters that are printed on the keys by pressing the relevant key once or several times. For example, to enter the name “

PAUL

”:

Press

7 once:

Press 2 once:

Press 8 twice:

PAU

Press 5 three times:

PAUL

The table below gives you the character assignment during text or number entry:

Tip

Press

BACK

to delete the last digit or

character entered.

5.4 Call in progress

Some options are available to you during a call. The available options are:

5.4.1 Adjust earpiece volume

During a call, press

: to select from

VOLUME 1

VOLUME 3

5.4.2 Mute/Unmute microphone

When the microphone is muted, your correspondent cannot hear you.

During a call, press

b or to turn

off the microphone.

Keys Assigned characters

space 1 @ _ # = < > ( ) & £ $ ¥ [ ] { } ¤ §

a b c 2 à ä ç å æ

d e f 3 è é ∆ Φ

g h i 4 ì Γ

1 2 3 4

€

j k l 5 Λ

m n o 6 ñ ò ö

p q r s 7 β Π Θ Σ

t u v 8 ù ü

w x y z 9 ø Ω Ξ Ψ

. 0 , / : ; " ’ ! ¡ ? ¿ * + - % \ ^ ~ |

Long press to switch between upper and lower case.

CD650_IFU_EN_UK.book Page 19 Monday, June 23, 2008 3:42 PM

Page 22

20 Use more of your phone

Press

b to turn on the

microphone.

5.4.3 Activate/Deactivate

loudspeaker mode

Danger

Handsfree activation can suddenly increase the volume in the earpiece to a very high level. Make sure the handset is not too close to your ear.

During a call, press

v key to

activate the loudspeaker mode. Press

v key again to return to

normal mode.

5.4.4 Adjust loudspeaker volume

During a call in handsfree mode, press

to select from

VOLUME 1

VOLUME 5

5.4.5 Initiate a second call

(subscription dependent)

During a call, press

OPTION

and

select

START 2ND CALL

to put the

current call on hold and initiate a second external call.

5.4.6 Consult phonebook

During a call, press

OPTION

and

select

PHONEBOOK

to access and

review phonebook entries.

5.4.7 Activate/deactivate XHD Sound mode

XHD sound mode is an exclusive feature making your phone conversations sounding just like real-life conversations. When activated, the XHD Sound mode transmits with high fidelity all the emotions of the call, as if your correspondent was talking next to you.

During a call, press

OPTION

scroll

: to

XHD ON

and press

SELECT

to activate.

To deactivate, press

OPTION,

scroll :

XHD OFF

and press

SELECT

5.4.8 Transfer call (subscription and country dependent)

During a call, press

OPTION,

scroll : to

SWITCH CALL

and

press

SELECT

• The screen shows

Enter the phone number that you want to transfer your incoming calls to.

• The call is transferred.

5.5 Call waiting

If you have subscribed to Call Waiting service, the earpiece will emit a beep tone to inform you that there is a second incoming call. The number or name of the second caller will also be displayed on your phone if you have subscribed to Caller Line Identification service (CLI). Please contact your network provider for more

CD650_IFU_EN_UK.book Page 20 Monday, June 23, 2008 3:42 PM

Page 23

Use more of your phone 21

information on this service

. When you receive a second incoming call while on the phone, press

r+2 key

to put the current call on hold and answer the second call. OR

- Press r+1 key to end the current call and answer the second call.

- Press

r+2 subsequently to toggle

between these 2 calls. The above operations may be different according to your network.

5.6 Caller Line Indentification

Caller Line Identification (CLI) is a special service that you may subscribe from your network operator. If you have subscribed to CLI service, the identity of the caller (caller’s number or name) will be displayed on your handset during an incoming call. If you have not subscribed to this service, or if the caller has chosen to withhold the number, the identity of the caller will not be displayed. Please contact your network provider for more information on this service.

5.7 Using your Phonebook

Your phone can store up to 200 phonebook memories, including 10 direct access memories

(1 to 9).

Depending on your country, Key 1 and Key 2 may be preset to the voice mail number and information service number of your network operator respectively. Each phonebook entry can have a maximum of 24 digits for the phone number and 14 characters for name.

5.7.1 Access phonebook

Press

d in idle mode and scroll :

to browse the phonebook.

• The phonebook entries are listed in alphabetical order.

To view the details of a phonebook entry, scroll

: to the phonebook

entry and press

SELECT

. To dial a number from the phonebook, scroll

: to the

phonebook entry and press

Tip

Instead of scrolling

: to browse the

phonebook entries, you can press the numeric key corresponding to the first letter of the entry you wish to locate. For example, pressing

2 will show the

entries starting with A. Pressing

2 again

will show the entries starting with B, etc...

5.7.2 Store a contact in the phonebook

Press

M in idle mode, press

SELECT

to enter

PHONEBOOK

press

SELECT

to enter

NEW

ENTRY

. Enter the name of the contact (maximum 14 characters) and press

. Enter the phone number (maximum 24 digits) and press

• A validation tone is emitted.

Tip

You cannot store a new phonebook entry when the memory is full. In this case, you have to delete existing entries to make space for new entries.

CD650_IFU_EN_UK.book Page 21 Monday, June 23, 2008 3:42 PM

Page 24

22 Use more of your phone

5.7.3 Edit a phonebook entry

Press

M in idle mode, press

SELECT

to enter

PHONEBOOK

scroll

: to

EDIT ENTRY

and press

SELECT

Scroll

: to select an entry you

wish to edit and press

SELECT

Press

CLEAR

to erase the letters one by one, enter the name and press

Press

CLEAR

to erase the digits one by one, enter the phone number and press

• A validation tone is emitted.

5.7.4 Set melody

With this function you can personalize the melody played when someone in the phonebook calls you.

Note

You need to subscribe to Caller Line Identification service to be able to benefit from this feature.

Press

M in idle mode, press

SELECT

to enter

PHONEBOOK

scroll

: to

SELECT MELODY

and

press

SELECT

Scroll

: to select an entry you

wish to set the melody for and press

SELECT

Press

EDIT

to set or change the melody for the contact. Scroll

: to the melody list and

press

SELECT

to confirm.

• A validation tone is emitted.

5.7.5 Delete a phonebook entry

Press

M in idle mode, press

SELECT

to enter

PHONEBOOK

scroll

: to

DELETE ENTRY

and

press

SELECT

Scroll

: to select an entry you

wish to delete and press

SELECT

DELETE?

is displayed on the screen.

Press

to confirm deletion.

• A validation tone is emitted.

5.7.6 Delete the phonebook list

Press

M in idle mode, press

SELECT

to enter

PHONEBOOK

scroll

: to

DELETE ALL

and press

SELECT

DELETE ALL?

is displayed on the screen. Press

to confirm deletion.

• A validation tone is emitted.

5.7.7 Direct Access Memory

You can store up to 9 direct access memories (Keys

1 to 9). A long

press on the keys in idle mode will automatically dial the stored phone number. Depending on your country, Key 1 and Key 2 may be preset to the voice mail number and information service number of your network operator respectively.

CD650_IFU_EN_UK.book Page 22 Monday, June 23, 2008 3:42 PM

Page 25

Use more of your phone 23

5.7.7.1 Store Direct Access Memory

Press

M in idle mode, press

SELECT

to enter

PHONEBOOK

scroll

: to

DIRECT MEMORY

and

press

SELECT

Scroll

: to select a key (Keys 1 to

9) and press

SELECT

• The stored number is displayed (if any).

Press

to display the menu options. Press

SELECT

to select

EDIT

Scroll : to the entry you wish to store as direct access memory and press

SELECT

to view the details.

Press

SELECT

to confirm.

• A validation tone is emitted.

5.7.7.2 Delete Direct Access Memory

Press

M in idle mode, press

SELECT

to enter

PHONEBOOK

scroll

: to

DIRECT MEMORY

and

press

SELECT

Scroll

: to select a key (Keys 1 to

9) and press

SELECT

• The stored number is displayed (if any).

Press

SELECT

to display the menu options. Scroll

: to

DELETE

and press

SELECT

• A validation tone is emitted.

5.8 Using the Redial list

The redial list stores the last 20 numbers dialled. A maximum of 24 digits can be displayed for each entry.

5.8.1 Access Redial list

Press

a in idle mode and scroll

: to browse the redial list.

• The last number dialled will appear first in the redial list. If the redial number matches a phonebook entry, the name will be displayed instead.

Note

To return to idle mode, press

e key.

5.8.2 Save a redial number into the phonebook

Press

a in idle mode and scroll : to select an entry. Press m

SELECT

to view the details.

Press

a and press m

SELECT

to select

SAVE NUMBER

. Enter the name of the contact (maximum 14 characters) and press

. Edit the number if necessary and press

• A validation tone is emitted.

Note

Press

CLEAR

to delete the last digit

or character entered.

4 5

CD650_IFU_EN_UK.book Page 23 Monday, June 23, 2008 3:42 PM

Page 26

24 Use more of your phone

5.8.3 Delete a redial number

Press

a in idle mode and scroll

: to select an entry.

Press

a, scroll : to

DELETE

and press

DELETE?

is displayed on the screen.

Press

again to confirm

deletion.

• A validation tone is emitted.

5.8.4 Delete the redial list

Press

a in idle mode.

Press

a, scroll : to

DELETE

ALL

and press mOK.

DELETE ALL?

is displayed on the screen. Press

again to confirm

deletion.

• A validation tone is emitted.

5.9 Using the Call log

The call log offers quick access to the

CALL LIST

and

SMS

events. If you have subscribed to Caller Line Identification service, the identity of the caller (caller’s number or name) will be displayed together with the date and time of the call*. The

CALL LIST

records the last 50 entries of the incoming calls. The calls (missed and received) are displayed in chronological order with the most recent call at the top of the list. When the call list is empty, the screen displays

LIST

EMPTY

Note

* If the identity of the caller is withheld or the network does not provide the date and time information, then only the date and time of the call will be displayed. If you have not subscribed to Caller Line Identification service, there will not be any information displayed in the call log.

5.9.1 Access Call log

Press

u in idle mode, scroll : to

CALL LIST

and

SMS

and press

SELECT

to enter the respective

sub-menus.

5.9.2 Save a call list entry into the phonebook

Press

u in idle mode and scroll :

to select an entry. Press

SELECT

to view the details. Press

a and press m

SELECT

to select

SAVE NUMBER

. Enter the name of the contact (maximum 14 characters) and press

. Edit the number (if necessary) and press

• A validation tone is emitted.

5.9.3 Delete a call list entry

Press

u in idle mode, press

SELECT

to enter

CALL LIST

scroll

: to an entry in the call list

and press

OPTION

Scroll

: to

DELETE ENTRY

and

press

SELECT

1 2

CD650_IFU_EN_UK.book Page 24 Monday, June 23, 2008 3:42 PM

Page 27

Use more of your phone 25

Press

to confirm deletion.

• A validation tone is emitted.

5.9.4 Delete the call list

Press

u in idle mode, press

SELECT

to enter

CALL LIST

scroll

: to an entry in the call list

and press

OPTION

Scroll

: to

DELETE ALL

and press

SELECT

DELETE ALL?

is displayed on the screen. Press

to confirm deletion.

• A validation tone is emitted.

5.10 Using the Intercom

Warning

Intercom and call transfer is only possible with handsets registered to the same base station.

This feature is only available when there are at least 2 registered handsets. It allows you to make free internal calls, transfer external calls from one handset to another and use the conference option.

5.10.1 Intercom another handset

Note

If the handset does not belong to CD650/ 655 range, this function may not be available.

Press

c key in idle mode.

• Intercom is established immediately

if there are only 2 registered handsets.

If there are more than 2 registered handsets, the handset numbers which are available for intercom will be displayed. Scroll

: to the

specific handset you want to call and press

SELECT

5.10.2 Transfer an external call to another handset

During the call, press and hold

key to put the external call on hold (the caller can no longer hear you).

• Intercom is established immediately if there are only 2 registered handsets.

If there are more than 2 registered handsets, the handset numbers which are available for intercom will be displayed. Scroll

: to the

specific handset you want to call and press

SELECT

• The called handset rings.

Press

r key on the called handset

to answer the internal call, where both internal callers can talk.

• Intercom is established.

Press

e key on the first handset to

transfer the external call to the called handset.

• The external call is transferred.

Note

If there is no answer from the called handset, press

c key to resume the

external call.

CD650_IFU_EN_UK.book Page 25 Monday, June 23, 2008 3:42 PM

Page 28

26 Use more of your phone

5.10.3 Answer an external call during intercom

When there is an incoming external call during an intercom, a new call tone is emitted. To end the intercom and answer the external call, press

e. The handset

will ring. Press

r to answer the

external call.

• Connection with the external call is established.

Tip

To put the internal call on hold and answer the incoming external call, press

r key.

5.10.4 Switch between an internal and external call

To switch between an internal or external call, press

c key.

5.10.5 Establish a three-party conference call

The conference call feature allows one external call to be shared with two handsets (in intercom). The three parties can share the conversation and no network subscription is required.

During the call, press

c key to

put the external call on hold (the caller can no longer hear you).

• Intercom is established immediately if there are only 2 registered handsets.

If there are more than 2 registered handsets, the handset numbers which are available for intercom will

be displayed. Scroll

: to the

specific handset you want to call and press

SELECT

• The called handset rings.

Press

r key on the called handset

to answer the internal call, where both internal callers can talk.

• Intercom is established.

Press and hold

c key for 2

seconds on the first handset to start the three-party conference.

•

CONFERENCE

will be displayed on the screen once the conference call is established.

Tip

CONFERENCE

mode is activated (see “Activate/Deactivate Conference mode” on page 32), a three-party conference call is automatically established if the second handset takes the line when there is already an external call in progress.

5.11 Paging

The paging feature enables you to locate a missing handset if the handset is in range and contains charged batteries.

Press p key on the base station.

• All the registered handsets start to ring.

Once retrieved, press any key on the handset to end the paging.

Note

If there are no key presses within 30 seconds, the handset and base station will automatically return to idle mode.

Tip

To stop paging, press

p key on the base

station again.

CD650_IFU_EN_UK.book Page 26 Monday, June 23, 2008 3:42 PM

Page 29

Personal settings 27

6 Personal settings

6.1 Change the Handset Name

You can name the handset and display the handset name in idle mode. The default handset name of your handset is

PHILIPS

Press

M in idle mode, scroll :

PERSONAL SETTING

and press

SELECT

, press m

SELECT

enter

HANDSET NAME

. Edit the handset name (maximum 14 characters) and press

confirm.

• A validation tone is emitted and the

screen returns to previous menu.

6.2 Handset Tones

6.2.1 Set the Ring Volume

Danger

When setting the ring volume of your phone or when the handset rings during an incoming call, please do not hold the handset too close to your ear as the volume of the ringing tone may damage your hearing.

There are 5 levels of ring volume, including progressive volume.

Press

M in idle mode, scroll :

PERSONAL SETTING

and press

SELECT

, scroll : to

HANDSET TONES

and press

SELECT

. Press m

SELECT

again

to enter

RING VOLUME

Scroll : to your desired volume level

and press mOK to confirm.

• A validation tone is emitted and the screen returns to previous menu.

Note

When the volume is set to off, the icon will be displayed on the screen.

6.2.2 Set the Ring Melody

There are 15 polyphonic ring melodies available on your handset.

Press

M in idle mode, scroll :

PERSONAL SETTING

and press

SELECT

, scroll : to

HANDSET TONES

and press

SELECT

. Scroll : to

RING

TONE

and press m

SELECT

Scroll

: to your desired melody to

play the melody. Press

to set the ring melody.

• A validation tone is emitted and the screen returns to previous menu.

6.2.3 Activate/Deactivate Key Beep

A single beep is emitted when a key is pressed. You can enable or disable the key beep. By default, the key beep is

Press

M in idle mode, scroll :

PERSONAL SETTING

and press

SELECT

, scroll : to

HANDSET TONES

and press

SELECT

. Scroll : to

KEY BEEP

and press

SELECT

Scroll

: to

ON or OFF

and press

to confirm.

• A validation tone is emitted and the screen returns to previous menu.

CD650_IFU_EN_UK.book Page 27 Monday, June 23, 2008 3:42 PM

Page 30

28 Personal settings

6.3 Change the Display Language

Your handset can support different display languages, depending on your country selection during the WELCOME mode.

Press

M in idle mode, scroll :

PERSONAL SETTING

and press

SELECT

, scroll : to

LANGUAGE

and press m

SELECT

Scroll

: to your desired language

and press

SELECT

to confirm.

• A validation tone is emitted and the screen returns to previous menu.

Tip

Once the display language is set, the option menus on the handset will switch to display in the selected language immediately.

6.4 Set Wallpaper

This feature allows you to select the wallpaper to be displayed in idle mode. There are 3 wallpapers pre-installed on your handset. The 4th wallpaper is a blank wallpaper.

Press

M in idle mode, scroll :

PERSONAL SETTING

and press

SELECT

, scroll : to

WALLPAPER

and press

SELECT

Scroll

: to your desired wallpaper

and press

SELECT

to confirm.

• A validation tone is emitted and the screen returns to previous menu.

6.5 Set Colour Theme

Press

M in idle mode, scroll :

PERSONAL SETTING

and press

SELECT

, scroll : to

COLOUR

THEME

and press m

SELECT

Scroll

: to

COLOUR 1, COLOUR

2, COLOUR 3

COLOUR 4

and

press

SELECT

to confirm.

• A validation tone is emitted.

6.6 Set Contrast Level

There are 5 contrast level options (

LEVEL 1, LEVEL 2, LEVEL 3, LEVEL 4

LEVEL 5

). The default contrast level is

LEVEL 2

Press

M in idle mode, scroll :

PERSONAL SETTING

and press

SELECT

, scroll : to

CONTRAST

and press m

SELECT

Scroll

: to your desired contrast

level (

LEVEL 1, LEVEL 2, LEVEL 3

LEVEL 4

LEVEL 5

) and press

SELECT

to confirm.

• A validation tone is emitted and the screen returns to previous menu.

6.7 Set Backlight time

Press

M in idle mode, scroll :

PERSONAL SETTING

and press

SELECT

, scroll : to

BACKLIGHT TIME

and press

SELECT

Scroll

: to

20 SECONDS, 40

SECONDS

60 SECONDS

and

press

SELECT

to confirm.

• A validation tone is emitted.

CD650_IFU_EN_UK.book Page 28 Monday, June 23, 2008 3:42 PM

Page 31

Personal settings 29

Note

By default, the backlight remains on for 20 seconds after each activation such as an incoming call, key presses, lifting the handset off the base station, etc.

6.8 Activate /Deactivate Auto Hang-up

This function enables you to end a call automatically by simply replacing the handset on the base station. By default, the Auto Hang-up feature is

Press

M in idle mode, scroll :

PERSONAL SETTING

and press

SELECT

, scroll : to

AUTO

HANG-UP

and press m

SELECT

Scroll

: to

ON or OFF

and press

SELECT

to confirm.

• A validation tone is emitted and the screen returns to previous menu.

CD650_IFU_EN_UK.book Page 29 Monday, June 23, 2008 3:42 PM

Page 32

30 Clock and Alarm settings

7 Clock and Alarm

settings

This feature allows you to set the date, time and alarm settings for your phone. The default date and time is

01-01

and

00:00

respectively.

7.1 Set date and time

Press

M in idle mode, scroll :

CLOCK & ALARM

and press

, press m

SELECT

to enter

SET DATE/TIME

. The last stored date is displayed. Enter the current date (dd-mm) and press

. The last stored time is displayed. Enter the current time (hh-mm). Press

2 to select

(am) or 7

to select

(pm) if the time is in 12

hours format. Press

confirm.

• A validation tone is emitted.

Note

An error tone will be emitted if an invalid digit is entered in the date/time fields. Hour: 00 to 12; Minute: 00 to 59 Date: 01 to 31; Month: 01 to 12

Warning

If your phone is connected to an ISDN line through an adaptor, the date & time may be updated after each call. The availability of date & time update is dependent on your network provider. Please check the date & time settings in

your ISDN system or contact your network provider.

7.2 Set date/time format

You can set your preferred date/time format for your phone. The default format is

DD-MM

and

24 HOURS

7.2.1 Set time format

Press

M in idle mode, scroll :

CLOCK & ALARM

and press

, scroll : to

SET FORMAT

and press

SELECT

Press

to enter

TIME

FORMAT

• The current setting is displayed.

Scroll

: to select time format

display (

12 HOURS

24 HOURS

)

and press

to confirm.

• A validation tone is emitted and the screen returns to previous menu.

7.2.2 Set date format

Press

M in idle mode, scroll :

CLOCK & ALARM

and press

, scroll : to

SET FORMAT

and press

SELECT

Scroll

: to enter

DATE FORMAT

and press mOK.

• The current setting is displayed.

Scroll

: to select date format

display (

DD:MM

MM:DD

) and

press

to confirm.

• A validation tone is emitted and the screen returns to previous menu.

CD650_IFU_EN_UK.book Page 30 Monday, June 23, 2008 3:42 PM

Page 33

Clock and Alarm settings 31

7.3 Set alarm

Press

M in idle mode, scroll :

CLOCK & ALARM

and press

, scroll : to

ALARM

and

press

SELECT

Scroll

: to

OFF, ON ONCE

DAILY

and press m

SELECT

If you select

ON ONCE

DAILY

, enter the time (hh-mm) for

the alarm and press

2 to select

(am) or 7 to select P (pm) if

the time is in 12 hours format. Press

to confirm.

• A validation tone is emitted and the screen returns to previous menu.

Note

The alarm tone and alarm icon will only sound/blink for 1 minute when the alarm time is reached. To mute the alarm tone, simply press any key on the handset.

7.4 Set alarm tone

Press

M in idle mode, scroll :

CLOCK & ALARM

and press

, scroll : to

ALARM TONE

and press

SELECT

Scroll

: to

MELODY 1, MELODY 2

MELODY 3

and press m

SELECT

to confirm.

• A validation tone is emitted and the screen returns to previous menu.

CD650_IFU_EN_UK.book Page 31 Monday, June 23, 2008 3:42 PM

Page 34

32 Advanced settings

8 Advanced settings

8.1 Easy Call

When activated, the Easy Call feature enables you to dial a number by pressing any key on your handset. This feature is very useful for direct access to emergency services. You can enter up to 24 digits for easy call number.

8.1.1 To activate Easy Call mode

Press

M in idle mode, scroll :

ADVANC. SETTINGS

and press

SELECT

, press m

SELECT

enter

EASY CALL

Press

SELECT

to enter

MODE

Scroll

: to

and press

SELECT

to confirm. Enter the Easy Call number and press

to confirm.

• A validation tone is emitted.

8.1.2 To deactivate Easy Call mode

Long press

M (when Easy Call

mode has been activated before). Scroll

: to

OFF

and press

SELECT

to confirm.

8.1.3 To change Easy Call number

Press

M in idle mode, scroll :

ADVANC. SETTINGS

and press

SELECT

, press m

SELECT

enter

EASY CALL

Scroll

: to

NUMBER

and press

SELECT

• The last stored Easy Call number is displayed (if any).

Enter the easy call number (maximum 24 digits) and press

to confirm.

• A validation tone is emitted and the screen returns to previous menu.

8.2 Activate/Deactivate Conference mode

When conference mode is activated, you can initiate a three-party conference call with a second handset registered to your base station automatically if the second handset takes the line when there is already an external call in progress. The default setting for this mode is

Press

M in idle mode, scroll :

ADVANC. SETTINGS

and press

SELECT

, scroll : to

CONFERENCE

and press

SELECT

Scroll

: to

OFF

and press

SELECT

to confirm.

• A validation tone is emitted and the screen returns to previous menu.

8.3 Call Barring

Call barring enables you to restrict selected handsets from dialling a phone number beginning with certain digits. You can set up to 4 different barring numbers, with each number containing up to 4 digits.

2 3

CD650_IFU_EN_UK.book Page 32 Monday, June 23, 2008 3:42 PM

Page 35

Advanced settings 33

8.3.1 To activate/deactivate Call Barring

Press

M in idle mode, scroll :

ADVANC. SETTINGS

and press

SELECT

, scroll : to

CALL

BARRING

and press m

SELECT

. Enter the master PIN when prompted and press

confirm.

Note

By default, the master PIN is 0000.

Press

SELECT

to enter

MODE

Scroll

: to

OFF

and press

SELECT

to confirm.

• A validation tone is emitted and the

screen returns to previous menu.

8.3.2 To modify Call Barring number

Press

M in idle mode, scroll :

ADVANC. SETTINGS

and press

SELECT

, scroll : to

CALL

BARRING

and press m

SELECT

. Enter the master PIN when prompted and press

confirm.

Note

By default, the master PIN is 0000.

Scroll

: to

NUMBER

and press

SELECT

Scroll

: to

NUMBER 1, NUMBER

2, NUMBER 3

NUMBER 4

and

press

SELECT

. Enter the barring number (maximum 4 digits) and press

confirm.

• A validation tone is emitted and the screen returns to previous menu.

Note

If a restricted number is dialled, the call will not be connected. When this happens, the phone emits an error tone and returns to idle mode.

8.4 Activate/Deactivate XHD Sound mode

The

XHD SOUND

mode is an exclusive feature making your phone conversations sounding just like real-life conversations. When activated, the

XHD SOUND

mode transmits with high fidelity all the emotions of the call as if your correspondent was talking next to you.

Press

M in idle mode, scroll :

ADVANC. SETTINGS

and press

SELECT

, scroll : to

XHD

SOUND

and press m

SELECT

Scroll

: to

OFF

and press

SELECT

to confirm.

Tip

During a call, you can also press

OPTION

and select

XHD ON/XHD

OFF

to activate/deactivate

XHD SOUND

mode.

8.5 Change master PIN

The master PIN is used for setting call barring and registration/unregistration of handsets. The default master PIN number is 0000. The maximum length of the master PIN is 4 digits. This PIN is also used to protect the settings of your handset. Your handset will prompt you whenever the PIN is required.

3 4

CD650_IFU_EN_UK.book Page 33 Monday, June 23, 2008 3:42 PM

Page 36

34 Advanced settings

Note The default PIN code is preset to 0000. If you change this PIN code, keep the PIN details in a safe place where you have easy access to them. Do not lose the PIN code.

Press

M in idle mode, scroll :

ADVANC. SETTINGS

and press

SELECT

, scroll : to

CHANGE

and press m

SELECT

. Enter the current master PIN when prompted and press

confirm.

• The PIN entered will be shown as

asterisks (*) on the screen.

Enter the new PIN and press

Enter the new PIN again and press

to confirm PIN change.

• A validation tone is emitted and the

screen returns to previous menu.

Note

If you forget your PIN, you will need to reset your phone to its default settings. See next section “Reset Unit” for more details.

8.6 Registration

If you wish to register an additional handset or if you have inadvertently unregistered your phone handset and want to re-register it, follow the procedure described below. This is the procedure for registering CD650/655 handsets.The procedures may vary according to the handset you want to register. In this case, please refer to the manufacturer of the additional handset. Additional handsets must be registered to the base unit before you can use them. Up

to 5 handsets can be registered to one base station. The master PIN is required before you can register or unregister handsets.

Note

By default, the master PIN is 0000.

To register your handset manually:

The Master PIN is required before you can register or unregister handsets.

Note

By default, the Master PIN is 0000.

On the base station, press and hold

p for approximately 5 seconds.

The base station emits a beep when it is ready to accept registration. On the handset, press

M key,

scroll

: to

ADVANC. SETTINGS

and press

SELECT

, scroll : to

REGISTRATION

and press

SELECT

Note

If no action is taken on the handset within 10 seconds, the registration procedure will be aborted. If this happens, repeat Step 1.

Enter the Master PIN when prompted and press

to confirm.

Note

By default, the Master PIN is 0000.

WAITING_ _

is displayed on the

screen.

Note

If no base is found within a certain period, the handset returns to idle mode.

3 4

CD650_IFU_EN_UK.book Page 34 Monday, June 23, 2008 3:42 PM

Page 37

Advanced settings 35

8.7 Unregister a handset

Press

M in idle mode, scroll :

ADVANC. SETTINGS

and press

SELECT

, scroll : to

UNREGISTER

and press

SELECT

. Enter the master PIN when prompted and press

confirm.

Note

By default, the master PIN is 0000.

Scroll

: to select the handset

number to unregister and press

SELECT

• A validation tone is emitted to

indicate successful unregistration and the screen shows

UNREGISTERED

Note

If no action is taken on the handset within 15 seconds, the unregistration procedure will be aborted and the handset returns to idle mode. To unregister a handset that does not belong to the CD650/655 range, you can only use the CD650/655 handset to unregister it.

8.8 Country Selection

The availability of this menu is dependent on your country. You can select another country different from the one chosen during WELCOME mode.

Press

M in idle mode, scroll :

ADVANC. SETTINGS

and press

SELECT

, scroll : to

COUNTRY

and press m

SELECT

Scroll

: to the country of your

choice and press

to confirm.

• A validation tone is emitted and the screen returns to previous menu.

Note Once the country is selected, the default line settings for the selected country will be applied to the phone automatically (e.g. Recall time, Dial mode, Language, etc).

8.9 Reset Unit

You can reset your phone to its default settings with this feature.

Warning

Upon reset, all your personal settings, call log and redial list entries will be deleted and the phone will return to its default settings. However, your phonebook will remain unchanged after reset.

Note You may have to configure your phone once again. In this case the WELCOME mode will appear again after the reset. (go to chapter 3.4)

Press

M in idle mode, scroll :

ADVANC. SETTINGS

and press

SELECT

, scroll : to

RESET

and press m

SELECT

RESET?

is displayed on the screen.

Press

to confirm.

• A validation tone is emitted.

• The unit is reset to its default settings (see “Default settings” on page 36).

CD650_IFU_EN_UK.book Page 35 Monday, June 23, 2008 3:42 PM

Page 38

36 Advanced settings

8.10 Default settings

8.11 Set Auto Prefix

This feature allows you to define a prefix number to be added to the beginning of a number during predialling (see “Predialling” on page 17). You can also use this feature to add a detect string to match and replace the first few digits of the number during predialling. You can enter up to a maximum of 5 digits

for the detect string and 10 digits for the auto prefix number.

Note The use of your CD655 cannot be guaranteed with all types of PABX.

Press

M in idle mode, scroll :

ADVANC. SETTINGS

and press

SELECT

, scroll : to

AUTO

PREFIX

and press m

SELECT

DETECT DIGIT

is displayed on the

screen.

• The last stored detect string is displayed (if any).

Enter a detect string number (maximum 5 digits) and press

to confirm.

PREFIX

is displayed on the screen.

• The last stored prefix number is displayed (if any).

Enter the prefix number (maximum 14 digits) and press

confirm.

• A validation tone is emitted and the screen returns to previous menu.

Note

If no detect string (blank) is entered, the prefix number will be automatically added to the predial number after

r key is

pressed. For numbers starting with *, # or a pause (P), the prefix number will not be added to the predial number after

r key is

pressed.

8.12 Change Recall time

Recall time (or dial delay) is the time delay by which the line will be

Ringer Volume MEDIUM Ringer Melody RING 1 Earpiece Volume

VOLUME 3

Speaker Volume

VOLUME 3

Wallpaper

Key Beep ON Contrast LEVEL 2 Backlight time 20s Auto Hang-up ON Alarm clock OFF Barring mode OFF Easy call OFF SMS reception ON Handset Name PHILIPS Date/Time 01-01; 00:00 Master PIN 0000 XHD sound mode

Conference ON

CD650_IFU_EN_UK.book Page 36 Monday, June 23, 2008 3:42 PM

Page 39

Advanced settings 37

disconnected after you press

r key. It

can be set to short, medium or long. The default value of recall time that is preset in your handset should be the best suited for your country network and therefore you should not need to change it.

Note

This setting is useful when using network services. The use of some services accessed with [

r + 1] , [r +

2] (call waiting, call forward...) will

depend on your recall time setting. Please contact your network provider for more details on this feature.

Press

M in idle mode, scroll :

ADVANC. SETTINGS

and press

SELECT

, scroll : to

RECALL

TIME

and press m

SELECT

Scroll

: to

SHORT, MEDIUM

LONG

and press m

SELECT

confirm.

• A validation tone is emitted and the screen returns to previous menu.

8.13 Change the Dial Mode (country-dependent)

The default value for dial mode that is preset in your handset should be the best suited for your country network and therefore you should not need to change it.

Press

M in idle mode, scroll :

ADVANC. SETTINGS

and press

SELECT

, scroll : to

DIAL

MODE

and press m

SELECT

Scroll

: to

TONE or PULSE

and

press

SELECT

to confirm.

• A validation tone is emitted and the screen returns to previous menu.

8.14 Set first ring

When this function is set to Off, the first ring from a voice call will not sound. This is particularly useful in countries where calling line identity is sent after the first ring. Consequently, the phones in the house will not ring when a message arrives.

Press

M in idle mode, scroll :

ADVANC. SETTINGS

and press

SELECT

, scroll : to

FIRST

RING

and press m

SELECT

Scroll

: to

OFF

and press

to confirm.

• A validation tone is emitted and the screen returns to previous menu.

CD650_IFU_EN_UK.book Page 37 Monday, June 23, 2008 3:42 PM

Page 40

38 Network Services

9 Network Services

This menu provides a convenient means for you to access, activate or deactivate some network services that are country/ subscription dependent. Contact your network provider for more information about these services. The default numbers and values that are preset in your phone should be the best suited for your country network and therefore you should not need to change them.

9.1 Call Forward

There are 3 call forwarding options available: Unconditional Call Forwarding, When Busy and When Unanswered.

9.1.1 Activate Call Forward

Note

When this feature is activated, depending on the call forwarding option you have set, your incoming calls will be forwarded to the number of your choice.

Press

M in idle mode, scroll :

NETWORK SERVICES

and press

SELECT

Scroll

: to the type of call

forwarding option you wish to set (

CALL FORWARD

CALL FWD

BUSY

CALL FWD UNANSW.

) and

press

SELECT

. Enter the number that you wish the call to be forwarded to and press

• The number for that selected service will be dialled.

When the number has been dialled, press

e to return to idle mode.

9.1.2 Deactivate Call Forward

Press

M in idle mode, scroll :

NETWORK SERVICES

and press

SELECT

Scroll

: to the type of call

forwarding option you wish to set (

CALL FORWARD

CALL FWD

BUSY

CALL FWD UNANSW.

) and

press

SELECT

Scroll

: to

DEACTIVATE

and

press

SELECT

to confirm.

• The number for that selected service will be dialled.

When the number has been dialled, press

e to return to idle mode.

9.1.3 Change codes

Press

M in idle mode, scroll :

NETWORK SERVICES

and press

SELECT

Scroll

: to the type of call

forwarding option you wish to set (

CALL FORWARD

CALL FWD

BUSY

CALL FWD UNANSW.

) and

press

SELECT

Scroll

: to

CHANGES CODES

and press

SELECT

to enter the number for forwarding. Press

to confirm.

CD650_IFU_EN_UK.book Page 38 Monday, June 23, 2008 3:42 PM

Page 41

Network Services 39

9.2 Voice Mail

This feature allows the caller to leave a voice message when you are unable, or do not wish to take a call yourself. The availability of this feature is dependent on your country and your subscription with your network provider. Charges often apply for you to retrieve messages, as these are stored by the network rather than on the handset itself. Contact your network provider for more information about this feature.

9.2.1 Set up Voice Mail number

Press

M in idle mode, scroll :

NETWORK SERVICES

and press

SELECT

, scroll : to

VOICEMAIL

VOICEMAIL 2

and

press

SELECT

Scroll

: to

SETTINGS

and press

SELECT

. Modify the voice mail number and press

9.2.2 Activate Voice Mail

Press

M in idle mode, scroll :

NETWORK SERVICES

and press

SELECT

, scroll : to

VOICEMAIL

VOICEMAIL 2

and

press

SELECT

Press

SELECT

CALL

• The number for that selected service

will be dialled.

When the number has been dialled, press

e to return to idle mode.

9.3 Call Return

9.3.1 Set up Call Return

Press

M in idle mode, scroll :

NETWORK SERVICES

and press

SELECT

, scroll : to

CALL

RETURN

and press m

SELECT

Scroll

: to

SETTINGS

and press

SELECT

. Enter the required number for call back and press

9.3.2 Activate Call Return

Press

M in idle mode, scroll :

NETWORK SERVICES

and press

SELECT

, scroll : to

CALL

RETURN

and press m

SELECT

Press

SELECT

CALL

• The number for that selected service

will be dialled.

When the number has been dialled, press

e to return to idle mode.

9.4 Cancel Call Back

9.4.1 Set up Cancel Call Back

Press

M in idle mode, scroll :

NETWORK SERVICES

and press

SELECT

, scroll : to

CANCEL

CALL BACK

and press m

SELECT

Scroll

: to

SETTINGS

and press

SELECT

. Enter the required number for cancelling of call back and press

CD650_IFU_EN_UK.book Page 39 Monday, June 23, 2008 3:42 PM

Page 42

40 Network Services

9.4.2 Activate Cancel Call Back

Press

M in idle mode, scroll :

NETWORK SERVICES

and press

SELECT

, scroll : to

CANCEL

CALL BACK

and press m

SELECT

Press

SELECT

CALL

• The number for that selected service will be dialled.

When the number has been dialled, press

e to return to idle mode.

9.5 Withhold ID

9.5.1 Set up Withhold ID

Press

M in idle mode, scroll :

NETWORK SERVICES

and press

SELECT

, scroll : to

WITHHOLD ID

and press

SELECT

Scroll

: to

SETTINGS

and press

SELECT

. Enter the required number for withholding ID and press

9.5.2 Activate Withhold ID

PPress

M in idle mode, scroll :

NETWORK SERVICES

and press

SELECT

, scroll : to

WITHHOLD ID

and press

SELECT

. Press

SELECT

ACTIVATE

• The number for that selected service

will be dialled.

When the number has been dialled, press

e to return to idle mode.

CD650_IFU_EN_UK.book Page 40 Monday, June 23, 2008 3:42 PM

Page 43

SMS 41

10 SMS

SMS stands for Short Message Service. To benefit from this service, you must subscribe to Caller Line Identification Service (CLI) together with SMS service from your network provider. SMS messages can be exchanged with a phone (mobile or compatible fixed lines), provided the receiver has also subscribed to CLI and SMS services. The factory settings on your handset correspond to the main national operator. If you wish to send or receive SMS messages through another service provider, you must set the corresponding numbers (see “To set outgoing number” on page 46). Your handset can store up to 50 SMS messages (40 SMS in the Inbox and 10 SMS in the Draft box) and the maximum length of each message is 160 characters.

10.1 Write and send new SMS Note

When composing your SMS, if there are no key presses for 30 seconds, the handset will return to idle mode. The edited message will be automatically saved in the SMS editor buffer.

Press

M in idle mode, scroll :

SMS

and press m

SELECT

, press

SELECT

again to enter

WRITE

SMS

Enter the text and press

Press to move cursor left by 1 position. Press and hold to jump to the 1st character/digit.

Press to move cursor right by 1 position. Press and hold to jump to the last character/digit.

CLEAR

Press to erase the previous character/digit. Press to return to the previous menu if there are no characters/digits on the input screen.

Long press

to delete all

characters/digits.

1 space 1 @ _ # = < > ( )

& £ $ ¥ [ ] { } ¤ §

2 a b c 2 à ä ç å æ 3 d e f 3 è é ∆ Φ 4 g h i 4 ì Γ 5 j k l 5 Λ 6 m n o 6 ñ ò ö 7 p q r s 7 β Π Θ Σ 8 t u v 8 ù ü 9 w x y z 9 ø Ω Ξ Ψ 0 . 0 , / : ; " ’ ! ¡ ? ¿ * + -

% \ ^ ~ |

€

CD650_IFU_EN_UK.book Page 41 Monday, June 23, 2008 3:42 PM

Page 44

42 SMS

Note

You can enter up to 160 characters for an SMS. If you receive a call while writing an SMS, the operation will be interrupted. When you go back to SMS editing, the message will be retrieved automatically.

Enter the destination phone number and press mOK.

Tip

You can also press

PHBK

, scroll :

to select a phone number, press

twice.

Press

to send the message. The message will be sent immediately.

•

SMS SENT!

is displayed if the

message is sent successfully.

Note

If the SMS messages cannot be sent successfully, the messages will be saved into the Draft box

10.2 View Inbox messages

The messages in the Inbox are listed according to the time of receipt, with the newest message appearing first. The Inbox can store up to 40 messages. Each time an SMS is received, you will be alerted by a beep tone and the screen displays the number of new messages received. The event LED will blink until the SMS has been reviewed.

Warning

When the message box is full, you will not be able to receive new messages. In this case, you need to delete some old messages in order to receive new ones.

Press

M in idle mode, scroll :

SMS

and press m

SELECT

, scroll

: to

INBOX

and press

SELECT

Tip

If there are unread new messages, the icon will appear in front of the SMS message.

Browse the list of SMS messages and select the message you wish to read.

• The message list is displayed with the sender’s phone number or corresponding name (if the number matches the phonebook record).

Press

VIEW

to view the message

content.

Tip

To scroll to the next or previous row while reading an SMS, press

:. The

sender’s phone number and the date and time of reception are displayed at the end of the message,

When viewing the message content, you can press

OPTION

to access

the following options

Long press

to switch between upper and lower case.

Send a reply to the sender of the message

FORWARD

Forward the message to another recipient

SAVE NUMBER

Save the sender’s number in your phonebook

CD650_IFU_EN_UK.book Page 42 Monday, June 23, 2008 3:42 PM

Page 45

SMS 43

10.2.1 Reply to an Inbox message

Go to the message content (refer to steps 1 to 3 in “View Inbox messages” on page 42) and press

OPTION

to display the Inbox menu options. Press

SELECT

to select

and start editing. After editing, press

to confirm the message. To send the message, refer to steps 3 to 4 in “Write and send new SMS” on page 41.

Tip

To save the message in the Draft box, refer to steps 1 to 3 in “Save a message in the Draft box” on page 44.

10.2.2 Forward an Inbox message

Go to the message content (refer to steps 1 to 3 in “View Inbox messages” on page 42) and press

OPTION

to display the Inbox menu options. Scroll

: to

FORWARD

and press

SELECT

to start editing it if you wish. After editing, press

to confirm the message. To send the message, refer to steps 3 to 4 in “Write and send new SMS” on page 41.

10.2.3 Save sender’s phone number in phonebook

Go to the message content (refer to steps 1 to 3 in “View Inbox messages” on page 42) and press

OPTION

to display the Inbox menu options. Scroll

: to

SAVE NUMBER

and

press

SELECT

to enter a name for this new contact. Enter a name for this new contact and press

. Modify the phone number (if necessary) and press

• A validation tone is emitted and the

screen returns to display the message content.

10.2.4 Delete an Inbox message

Go to the message content (refer to steps 1 to 3 in “View Inbox messages” on page 42) and press

OPTION

to display the Inbox menu options. Scroll

: to

DELETE

and press

SELECT

to confirm deletion.

10.2.5 Delete all Inbox messages

Go to the message content (refer to steps 1 to 3 in “View Inbox messages” on page 42) and press

OPTION

to display the Inbox menu options. Scroll

: to

DELETE ALL

and press

SELECT

DELETE

Delete the selected message

DELETE ALL

Delete all messages in the Inbox

CD650_IFU_EN_UK.book Page 43 Monday, June 23, 2008 3:42 PM

Page 46

44 SMS

DELETE ALL?

is displayed on the

screen. Press

SELECT

again to

confirm deletion.

10.3 Save a message in the Draft box

After writing the message (refer to steps 1 to 3 in “Write and send new SMS” on page 41), press

Scroll

: to

SAVE AS DRAFT

Press

to confirm.

10.3.1 Review Draft messages

Press

M in idle mode, scroll :

SMS

and press m

SELECT

, scroll

: to

DRAFTS

and press

SELECT

. Browse the list of SMS messages and select the message you wish to review. Scroll

: to the message you wish

to review and press

VIEW

. When viewing the message content, you can press

OPTION

to access

the following options:

10.3.2 Edit a Draft message

Go to the draft message (refer to steps 1 to 3 in “Review Draft messages” on page 44) and press

OPTION

to display the

DRAFTS

menu options. Press

SELECT

EDIT

the message. After editing, press

to confirm message. To send the message, refer to steps 3 and 4 in “Write and send new SMS” on page 41.

Tip

To save the message in the Draft box, refer to steps 1 to 3 in “Save a message in the Draft box” on page 44.

10.3.3 Send a message from Draft box

Go to the draft message (refer to steps 1 to 3 in “Review Draft messages” on page 44). Press

to send the message. The message will be sent immediately.

•

SMS SENT!

is displayed if the

message is sent successfully.

10.3.4 Delete a Draft message

Go to the draft message (refer to steps 1 to 3 in “Review Draft messages” on page 44) and press

OPTION

to display the

DRAFTS

menu options. Scroll

: to

DELETE

and press

SELECT

to confirm deletion.

EDIT

Edit the message and send or save as draft

SEND

Send the message immediately

DELETE

Delete the message

DELETE ALL

Delete all messages in the Draft box

2 3

CD650_IFU_EN_UK.book Page 44 Monday, June 23, 2008 3:42 PM

Page 47

SMS 45

10.3.5 Delete all Draft messages

Go to the draft message (refer to steps 1 to 3 in “Review Draft messages” on page 44) and press

OPTION

to display the

DRAFTS

menu options. Scroll

: to

DELETE ALL

and press

SELECT

DELETE ALL?

is displayed on the

screen. Press

SELECT

again to

confirm deletion.

10.4 SMS settings

This menu allows you to set up the server for sending and receiving SMS messages. Your phone can receive messages from 3 service centers. Each service center consists of 2 numbers:

- Incoming number

- Outgoing number The maximum length of an incoming/ outgoing number is 24 digits.

Note

The incoming and outgoing numbers of your phone are already set to work on your country network. We advise you not to modify these settings. For more information or in case of any problems, please contact your local network provider.

10.4.1 Activate or deactivate the reception of SMS

Your phone can receive SMS messages from another phone if you have subscribed to the Caller Line

Identification (CLI) and SMS services from your network provider. By default, SMS reception is set to

so that you can

receive SMS messages.

Press

M in idle mode, scroll :

SMS

and press m

SELECT

, scroll

: to

SETTINGS

and press

SELECT

, press m

SELECT

enter

SMS RECEPTION

Scroll

: to

OFF

and press

to confirm.

Tip

Even if SMS reception is

OFF

, you can still

send SMS messages.

10.4.2 To set incoming number

The incoming and outgoing numbers of your phone are already set to work on your country network. We advise you not to modify these settings. For more details or in case of any problems, please contact your local network provider.

Press

M in idle mode, scroll :

SMS

and press m

SELECT

, scroll

: to

SETTINGS

and press

SELECT

, scroll : to

SMS

CENTRE

and press m

SELECT

Scroll

: to

SMS CENTRE 1, SMS

CENTRE 2

SMS CENTRE 3

and

press

Press

SELECT

to enter

INCOMING NUMBER

. Enter the incoming number and press

to confirm.

• A validation tone is emitted.

Note

The maximum length of an incoming number is 24 digits.

CD650_IFU_EN_UK.book Page 45 Monday, June 23, 2008 3:42 PM

Page 48

46 SMS

10.4.3 To set outgoing number

Press

M in idle mode, scroll :

SMS

and press m

SELECT

, scroll

: to

SETTINGS

and press

SELECT

, scroll : to

SMS

CENTRE

and press m

SELECT

Scroll

: to

SMS CENTRE 1, SMS

CENTRE 2

SMS CENTRE 3

and

press

Press

SELECT

to enter

OUTGOING NUMBER

. Enter the outgoing number and press

to confirm.

• A validation tone is emitted.

Note

The maximum length of an outgoing number is 24 digits.

10.4.4 To set default SMS center

Press

M in idle mode, scroll :

SMS

and press m

SELECT

, scroll

: to

SETTINGS

and press

SELECT

, scroll : to

DEFAULT

CENTRE.

and press m

SELECT

Scroll

: to SMS Center that you

wish to set as default center (

SMS

CENTRE 1

SMS CENTRE 2

SMS

CENTRE 3

) and press m

SELECT

• A validation tone is emitted.

Note

The default SMS center number is 1.

CD650_IFU_EN_UK.book Page 46 Monday, June 23, 2008 3:42 PM

Page 49

Technical data 47

11 Technical data

Display

• Progressive LCD backlight

General telephone features

• Dual mode caller name & number identification

• 15 polyphonic ringer melodies

Phonebook list, Redial list and Call log

• Phonebook list with 200 entries

• Redial list with 20 entries

• Call log with 50 entries

Battery

• 2 x HR AAA NiMh 600 mAh batteries

Radio specifications

• Frequency band: 1880 - 1900 MHz

• Maximum output power: 250 mW

Power consumption

• Power consumption at idle mode: around 800 mW

Temperature range

• Operation: Between 0 and 35º C (32 to 95º F).

• Storage: Between -20 and 45º C (-4 to 113º F).

Relative humidity

• Operation: Up to 95% at 40°C

• Storage: Up to 95% at 40°C

CD650_IFU_EN_UK.book Page 47 Monday, June 23, 2008 3:42 PM

Page 50

48 Frequently asked questions

12 Frequently asked

questions

www.philips.com/support

In this chapter, you will find the most frequently asked questions and answers about your phone.

Connection

The handset does not switch on!

• Charge the batteries: Put the handset on the base station to charge. After a few moments, the phone will switch on.

The handset does not charge!

• Check charger connections.

icon is not blinking during

charge!

• Battery is full: There is no need to charge the battery.

• Bad battery contact: Adjust the handset slightly.

• Dirty contact: Clean the batteries contact with a dry cloth.

• Wrong batteries installed: Use only AAA rechargeable batteries supplied with your unit There could be risk of battery leakage if you use alkaline batteries or other battery types.

Communication is lost during a call!

• Charge the battery

• Move closer to the base station.

The phone is "Out of range"!

• Move closer to the base station.

Warning batt. is displayed on handset!

• Use only AAA rechargeable batteries supplied with your unit. There could be risk of battery leakage if you use alkaline batteries or other battery types.

Set-up

Searching...

is displayed on handset

and icon is blinking!

• Move closer to the base station.

• Make sure that your base station is on.

• Reset your unit and restart handset registration (see “Registration” on page 34).

Sound

Handset does not ring!

Check that the

RING VOLUME

is not set

off, and make sure icon is not

displayed on the screen (see “Set the Ring Volume” in chapter 6.2.1).

Caller cannot hear me at all!

Microphone may be muted: During a call, press

CD650_IFU_EN_UK.book Page 48 Monday, June 23, 2008 3:42 PM

Page 51

Frequently asked questions 49

There’s no dialling tone!

• No power: Check the connections.

• Batteries are empty: Charge the batteries.

• Move closer to the base station.

• Wrong line cable used: Use the line cable provided.

• Line adaptor is required: Connect the line adaptor to the line cord.

Caller cannot hear me clearly!

• Move closer to the base station.

• Move the base station at least one metre away from any electronic appliances.

Frequent noise interference on my radio or television!

• Move the base station as far away as possible from the electrical appliances.

Product behaviour

Keypad does not work!

• Unlock your keypad: Long press

in idle mode.

The handset warms up when making a long call!

• This is a normal behavior. The handset consumes energy while calling.

The handset cannot be registered to the base station!

• Maximum number of handsets (5) has been reached. To register a new handset, unregister an existing handset.

• Remove and replace the handset batteries.

• Try again by disconnecting and connecting the base station power supply and follow the procedure to register a handset.

• Make sure that you have entered the correct PIN code. If you have not changed it, by default it is 0000.

Caller’s number is not displayed!

• Service is not activated: Check your subscription with your network operator.

I cannot receive new SMS!

• SMS storage space is full: Delete old SMS to receive new ones.

• Wrong SMS settings: Check your SMS settings (see “SMS settings” in chapter

10.4).

I cannot send or receive new SMS!

• Service is not activated: Check your subscription with your network operator.

• Wrong SMS settings: Check your SMS settings (see “SMS settings” in chapter

10.4).

• Another SMS-enabled phone is also on your line. Deactivate the SMS reception on one of the device.

• There is a compatibility problem between the operators. Contact your service provider for more information.

• Identity is withheld. Show identity (see “Activate Withhold ID” in chapter

9.5.2).

I cannot change the settings of my voice mail

Operator voice mail is managed by your operator and not the phone itself. Please

CD650_IFU_EN_UK.book Page 49 Monday, June 23, 2008 3:42 PM

Page 52

50 Frequently asked questions

contact your operator should you want to change the settings.

Poor audio quality and the antenna icon is blinking!

• The indoor and outdoor range of the phone is up to 50 metres and 300 metres respectively. When the handset moves beyond the operation range, the antenna icon will blink.

My handset keeps going into idle mode!

• If there are no key presses for 30 seconds, the handset will automatically return to idle mode. It will also return to idle mode automatically when you place the handset back on the base station.

Phonebook entry cannot be stored and

Memory full

is displayed!

• Delete an entry to free memory before saving your contact again.

The Master PIN code is wrong!

• The default master PIN is 0000.

• If it has been changed before, and you cannot remember the new one, reset the handset to revert to the default master PIN code (see “Reset Unit” in chapter 8.9).

CD650_IFU_EN_UK.book Page 50 Monday, June 23, 2008 3:42 PM

Page 53

Index 51

13 Index

Accessories 6 Alarm

Alarm tone

Answer a call

Answer an external call

Auto Answer

Backlight time 28

Call Barring 32 Call Forward

Call in progress

Call log

17, 24

Call Return

Call waiting

Cancel Call Back

Charge battery

Clock and Alarm

Colour Theme

Conference call

Connect base station

Contrast

Country Selection

Date and time 30 Default settings

Delete a call list entry

Delete a phonebook entry

Delete a redial number

Delete call list

Delete redial list

Dial Mode

Direct dialling

Display icons

Draft box

Edit a phonebook entry 22 Edit Draft message

End a call

First ring 37 Forward SMS message

Handset Name 27 Handset Tones

Handsfree answering

Incoming number 45 Install battery

Install phone

11, 12

Intercom

Key Tone 27 Keypad lock/unlock

Language 28 Loudspeaker mode

Loudspeaker volume

Make a call 17 Master PIN

Menu icons

Menu structure

Mute

Outgoing number 46 Overview of the base station 10 Overview of your phone

CD650_IFU_EN_UK.book Page 51 Monday, June 23, 2008 3:42 PM

Page 54

52 Index

Paging 26 Phonebook

17, 21

Predialling

Recall time 36 Recycling and disposal

Redial list

17, 23

Registration

Reply SMS message

Reset Unit

Ring Melody

Ring Volume

Save a redial number 23 Save number to phonebook

SMS settings

Store a contact

Switch calls

Switch handset on/off

Text or number entry 19

Unmute 19 Unregister

Voice Mail 39 Voice mail

21, 22

Volume

19, 41

Wallpaper 28 Withhold ID

Write a SMS

XHD Sound mode 20

CD650_IFU_EN_UK.book Page 52 Monday, June 23, 2008 3:42 PM

Page 55

ENGLISH

CD650_IFU_EN_UK.book Page 45 Monday, June 23, 2008 3:42 PM

Page 56

Reproduction in whole or in part is prohibited without the

written consent of the copyright owner

Document number: 3111 285 44131

Printed in China

CD650_IFU_EN_UK.book Page 46 Monday, June 23, 2008 3:42 PM