Page 1
Troubleshooting Welcome to Philips
No dialing tone
Check your phone connections. •
The handset is out of r ange . Move it closer to the base station.
The signal icon ashes.
The handset is out of r ange . Move it closer to the base station. •
If the handset displays [UNREGISTERED], register the handset .
The caller ID does not display.
The service is not activated. Check with your service provider. •
The caller ’s infor mation is withheld or unavailable.
For more information, see the User Manual.
ECO mode
The ECO mode reduces the transmission power of the handset and base station.
1 Press menu.
2 Select [ADVANCED SET] > [ECO], then press [SELECT] to conr m.
3 Select the new set ting, then press [OK] to conr m.
The setting is saved.
»
»ECO is displayed instead of
Note
When t he • ECO mode is activated , the connec tion range between
the handset a nd the base station can be reduced.
in standby mode
Register your product at www.philips.com/welcome
Need help?
User Manual
Refer to the User Manual that came with your new phone.
Online help
www.philips.com/support
© 2009 Koninklijke Philips Electronics N.V. All rights reserved. Reproduction in whole
or in part is prohibited without the written consent of the copyright owner. Trademarks
are the property of Koninklijke Philips Electronics N.V. or their respective owners.
Register your product and get support at
www.philips.com/welcome
Quick Start Guide
Install
1
CD560
CD565
0168
Printed in China
CD560-565H_EN_QSG_V1.3
2
Enjoy
Page 2
What’s in the box
R
R
Handset
User manual
Note
In some countries, you have to connect the line adaptor to the line cord, then •
plug the line cord to the line socket .
In multi-handset packs, there are additional handsets and chargers with power •
supply units.
Charger
Guarantee Quick Start Guide
Power supply
Install
1
1 The batteries are pre-installed in the ha ndset. Pull the battery t ape of f from
2 Place the handset on the charging cradle to power up.
Congure your phone (if necessary)
Set the date and time.
Install the handset
the battery door before charging.
The phone is now ready to use.
»
2
Make a call
1 Press and dial the phone number ; or
2 Dial the phone number and Press
Answer a call
When the phone rings. Press
End a call
Press
Adjust the earpiece volume
Press
Set the handset’s ringtone
1 Press menu.
2 Select [PERSONAL SET] > [HANDSET TONES] > [RING
3 Select a ringtone, then press [SELECT] to con rm .
Add a record
1 Press menu.
2 Select [PHONEBOOK] > [NEW ENTRY], then press
3 Enter the name then press [OK] to co nr m.
4 Enter the number, the n press [SAVE] to conrm .
Enjoy
to dial out the call.
or to answer the call.
.
or to adjust the volume during a call.
TONES], then press [SELECT] to conr m.
The setting is saved.
»
[SELECT] to co nrm .
Caution
Use only the supplied bat teries and adaptor •
Loading...