Welcome
Quick start guide
EN
1
1
2
2
3
3
Connect
Install
Enjoy
What’s in the box
Handset
Line cord
User Guide
The line adaptor may not be attached to the line cord. In this case, you have to connect the line adaptor
to the line cord first before plugging the line cord to the line socket.
In multihandset packs, you will find one or more additional handsets, chargers with power supply units
and additional rechargeable batteries.
Base station
2 AAA rechargeable
batteries
Quick Start Guide
Power supply for
base station
Battery door
Warranty card
WARNING Always use the cables and batteries that came with your phone.
2
EN
Connect
1
1. Place the base station in a central location near the telephone line socket and electricity sockets.
2. Connect the line cord and the power cable to the proper connector at the back of the base station.
Connect the base station
1.
3. Connect the other end of the line cord to the telephone line socket and the other end of the power
cable to the electricity socket.
BA
A
2.
Connect
the power
supply
Connect the line
A
cord to the
line socket
B
Install
2
Insert batteries and charge
Insert batteries Charge handset for 24 hours
Set date and time
1. Press mMENU.
2. Scroll
: to Clock & Alarm and press mSELECT.
3. Press
mSELECT to enter Set Date/Time.
4. Enter current time (HH:MM) and current date (DD/MM/YY) and press
Now, you are ready to use your phone.
mSELECT.
3
Enjoy
3
Make a call
Enter the phone number and press r.
OR
Press
r and enter the phone number.
Answer a call
When the phone rings, press r key.
End a call
Press e key.
Adjust earpiece volume during a call
Press : to select from Volume 1 to Volume 5.
Set the ring melody
1. Press mMENU, scroll : to Personal Set and press mSELECT, press mSELECT to enter
Handset Tones, scroll
2. Scroll
: to your desired melody to play the melody.
3. Press
mSELECT to set the ring melody.
A confirmation beep is emitted and the screen returns to previous menu.
Store a contact in the phonebook
1. Press mMENU, scroll : to Phonebook and press mSELECT, press mSELECT to enter
New Entry.
2. Enter the name of the contact (maximum 12 characters) and press
3. Enter the number (maximum 24 digits) and press
4. Enter the SMS Box number and press
(The default SMS Box is 9. To modify, press
: to choose a group (<No Group>, <Group A>, <Group B>, <Group C>) and press
5. Scroll
mSELECT to confirm.
A long confirmation beep tone is emitted.
Access the phonebook
1. Press d in stand-by mode or press mMENU, scroll : to Phonebook and press mSELECT,
scroll
: to List Entry and press mSELECT.
2. Press
: to browse the phonebook.
: to Ring Melody and press mSELECT.
mOK.
mOK.
mOK (only for UK).
>CLEAR and then enter the number (0 to 9).)
4
Switch the handset On/Off
Press and hold e key for 5 seconds to switch off the handset in stand-by mode.
Short press
Keypad lock/unlock
Press and hold * key for 2 seconds to lock and unlock keypad in stand-by mode.
Paging
1. Press c key on the base until the handset starts to ring.
2. Once the handset is retrieved, press
Press To
m
>
r
e
u
d
c
e key to switch on the handset again.
e to end the paging.
Enter the main menu from stand-by mode.
Select the function displayed on the handset screen directly above it.
Activate mute function during a call.
Go to redial list from stand-by mode.
Select the function displayed on the handset screen directly above it.
Answer an incoming external or internal call.
Insert R for operator services when on the line.
Hang up a call.
Long press from menu browing to return to stand-by mode, short press to return to
previous menu.
Long press in stand-by mode to switch off the handset, short press to switch on the
handset again.
Access call log from stand-by mode.
Scroll up a menu list or go to the previous phonebook or call log record.
Increase earpiece volume during a call.
Go to the previous character in editing mode.
Access phonebook from stand-by mode.
Scroll down a menu list or go to the next phonebook or call log record.
Decrease earpiece volume during a call.
Go to the next character in editing mode.
Initiate an internal call.
EN
v
#
*
Answer an incoming call in handsfree mode.
Activate and deactivate the loudspeaker during a call.
Dial # in stand-by mode.
Long press to mute the ringer in stand-by mode.
Insert a pause in dialling mode.
Switch between upper and lower case in editing mode.
Dial * in stand-by mode.
Long press to activate and deactivate keypad lock.
5
Troubleshooting
For more information, please refer to p.50 of CD530 user manual and p.58 of CD535 user manual.
Problem Solution
• No dialling tone • Check the connections
• Charge the batteries for at least 24 hours
• Use the line cable provided
• Poor audio quality • Move closer to the base station
• Move the base station at least one metre away from
any electrical appliances
• The icon is blinking
• Caller Line Identification
(CLI) service does not work
• Register the handset to the base station
• Move closer to the base station
• Check your subscription with your network operator
Need help?
User Manual
Refer to the User Manual that is supplied with your CD530/535.
Online help
www.p4c.philips.com
3111 285 26381
6
Loading...