Philips CD245 User Manual
Telephone CD240
CD245
What’s in the box
Connect
1
Connect the base station
1.
Place the base station in a central location near the telephone line socket and electricity socket.
Welcome
Quick start guide
1
2
3
Connect
Install
Enjoy
Base station for CD240
Handset
batteries
User manual
*You may find in the box the line adaptor delivered separately from the line cable. In this
case, you have to connect the line adaptor to the line cord first before plugging the line
cord to the line socket.
In multihandset packs, you will find one or more additional handsets, chargers with power
supply units and additional rechargeable batteries.
WARNING Always use the cables and batteries that came with your phone.
OR
CD245
Power supply2 AAA rechargeable
Guarantee
Battery door
Line cord*
Quick Start Guide
2. Connect the line cord and the power cable to their corresponding connectors at the
back of the base station.
3. Connect the other end of the line cord and power cable to their respective sockets.
Install
2
Insert rechargeable batteries and charge
Insert batteries Charge handset for 24 hours
Configure your phone (if necessary)
After charging your phone for a few minutes, a Welcome screen may appear depending on
the country where you live. If the Welcome screen appears:
1. Press
m to display a list of countries.
: to find your country.
2. Scroll
3. Press
mOK to confirm your selection.
Set date and time
1. Press m in idle mode, scroll : to CLOCK/ALARM and press mOK, press
mOK to enter DATE & TIME.
2. The last stored date is displayed. Enter the current date (DD/MM) and press
3. The last stored time is displayed. Enter the current time (HH:MM) and press
A validation tone is emitted and your phone is now ready for use.
mOK.
mOK to confirm.
3
Enjoy
Make a call
Dial the number (maximum 24 digits) and press r key.
OR
Press
v key to take the line and dial the number (maximum 24 digits).
Answer a call
When the phone rings, press r key.
End a call
To end a conversation, press e key.
Adjust earpiece volume
During a call, press : to select from VOLUME 1 to VOLUME 3.
Set the ring melody
1. Press m key in idle mode, scroll : to PERSONAL SET and press mOK,
press
mOK to enter HANDSET TONE, scroll : to RING MELODY and
press
mOK.
2. Scroll
: to your desired melody to play the melody.
3. Press
mOK to set the ring melody.
A validation tone is emitted and the screen returns to previous menu.
Store a contact in the phonebook
1. Press m key in idle mode, scroll : to PHONEBOOK and press mOK, press
mOK to enter ADD NUMBER.
2.
ENTER NAME is displayed on the screen.
3. Enter the name of the contact (maximum 12 characters) and press
4. Enter the number (maximum 24 digits) and press
A validation tone is emitted.
Access the phonebook
1. Press d in idle mode and scroll : to browse the phonebook.
2. To view the details, press
p key.
mOK.
mOK.
Switch the handset On/Off
Press and hold e key for more than 5 seconds to switch on/off the handset in idle
mode.
Keypad lock/unlock
Press and hold * key for 1 second to lock and unlock the keypad in idle mode.
Paging
1. Press p key on the base station. All the registered handsets start to ring.
2. Once retrieved, press any key on the handset to end the paging.
Listen to messages recorded on the answering machine (for CD245 only)
Press o on the base station to turn on the answering machine (the LED is turned on).
o again to turn off the answering machine (the LED is turned off).
Press
> on the base station to play phone messages (the first recorded message
Press
will be played first).
Press
r to skip the current message and play the next message.
l to go back to the previous message (if pressed within 1 second of current
Press
message playback).
Press
l to replay current message (if pressed after 1 second of current message
playback).
Press
v to adjust speaker volume during message playback.
x to delete the current message.
Press
Refer to your CD245 User Manual for details about the answering machine function.
Frequently asked questions
For more information, please refer to the User Manual that came with your
phone.
Problem Solution
• There’s no dialling tone! • Check the connections
• Caller cannot hear me
clearly!
SEARCHING... is
•
displayed on handset and
icon is blinking!
• Calller number is not
displayed!
• Charge the batteries
• Use the line cable provided
• Move closer to the base station
• Move the base station at least one metre away
from any electrical appliances
• Move closer to the base station
• Reset your unit and restart the handset registration
• Check your subscription with your network
operator
Need help?
User Manual
Refer to the User Manual that came with your CD240/245.
Online help
www.philips.com/support
3111 285 33431
Loading...