Page 1
Welcome
Connect
Install
Enjoy
1
2
3
Quick start guide
Page 2
What’s in the box
CD140/CD145
Handset
CD145
Base station
Power supply
unit for
base station
Line cord
2 x AAA
Rechargeable
batteries
CD140 or CD145
User manual
Quick start guide
Guarantee
The line adaptor may not be attached to the line cord. You may find the line adaptor
in the box. In this case, you have to connect the line adaptor to the line cord first
before plugging the line cord to the line socket.
In multihandset packs, you will find one or more additional handsets, chargers with
power supply units and additional rechargeable batteries.
WARNING Always use the cables and batteries that are supplied with your phone.
CD140
CD140
Base station
OR
Page 3
1
Connect
Connect the base station
1. Insert the plug of the power cord into the socket under the base station
2. Insert the plug of the line cord into the socket under the base station
3.
Connect the other end of the line cord together with the line adaptor if necessary, to
the telephone line socket and the other end of the power cable to the electricity socket
2
Install
Insert rechargeable batteries and charge
Configure your phone
1. Press and the available country code blinks.
2. Press repeatedly to scroll to your desired country code. (See Country
setting table)
3. Press and your phone is configured according to your selected country code.
Insert batteries Charge handset for 24 hours
1
2
Connect
the
power
supply
Connect
the line
cord to
the line
socket
3
Page 4
Set time
1. Press
2. Press
3. Enter the time (HH-MM) in 24-hour format
4. Press to save the settings
Make a call
Press and dial the number
OR
Dial the number and press
Answer a call
When the phone rings, press .
End a call
Press
3
Enjoy
Country setting table
Code Country * Default
outgoing
message
language
* Outgoing
message
languages
available
01 Germany German 1 – German
2 – Turkish
02 Austria German
03 Turkey Turkish
04 UK English 1 – English
05 Ireland English
06 France French 1 – French
2 – Italian
3 – Portuguese
4 – Greek
5 – Spanish
07 Italy Italian
08 Portugal Portuguese
09 Greece Greek
10 Spain Spanish
11-1 Switzerland Ger man 1 – French
2 – German
3 – Italian
4 – English
11-2 Switzerland French
11-3 Switzerland Italian
12 France French
13 Netherlands Dutch 1 – Dutch
2 – French
3 – German
4 – English
14-1 Belgium Dutch
14-2 Belgium French
Code Country * Default
outgoing
message
language
* Outgoing
message
languages
available
15 Sweden Swedish 1 – Sweden
2 – Norwegian
3 – Finnish
4 – Danish
16 Norway Norwegian
17 Finland Finnish
18 Denmark Danish
21 Romania Romanian 1 – Romanian
2 – Polish
3 – Czech
4 – Hungarian
5 – English
22 Poland Polish
23 Czech Czech
24 Hungary Hungarian
25 Slovakia Czech
26 Slovenia English
27 Croatia English
28 Bulgaria English
29 Serbia English
30 Singapore English 1 – English
2 – Bahasa
31 Indonesia English
32 Malaysia English
35 Australia English
36 New Zealand English
39 Brazil Brazilian 1 – Brazilian
2 – Spanish
40 Mexico Spanish
* This is applicable to CD145 only. For more information about changing the outgoing message
languages, see section 5.6.5 of the CD145 user manual.
Page 5
Listen to new messages recorded on answering machine (applicable to
CD145 only)
Press on the base station to turn on the answering machine, the LED is turned on
Press again to turn off the answering machine, the LED is turned off
Press on the base station, playback of the oldest new message will begin
Press to skip the current message and play the next message
Press to go back to previous message if it is pressed within one second of
current message playback
Press to replay current message if it is pressed after one second of current
message playback
Press to increase or to decrease speaker volume during message playback
Press to delete the current message
See CD145 user manual for details about answering machine function
Store a number in the phonebook
1. Press
2. Press and memor y number 0 is shown
3. Press repeatedly to select another memory number from 0 through 19
4. Enter the phone number. If you enter the number wrongly, press to erase
a digit
5. Press to save the number
Set the ring melody
1. Press
2. Press and the current ring melody is played
3. Press one of the digit keys through to select your desired ring melody
4. Press to save the settings
Set the earpiece volume
1. Press
2. Press and the current earpiece volume level settings is displayed
3. Press (low), (medium) or (high) to select your desired earpiece
volume level
4. Press to save the settings
Page 6
Troubleshooting
For more information, see the user manual that came with your CD140 or CD145.
Problem Solution
• No dialing tone • Check the connections
• Charge the batteries for at least 24 hours
• Use the line cable provided
• Poor audio quality • Move closer to the base station
• Move the base station at least one metre
away from any electrical appliances
• The icon is blinking • Register the handset to the base station
• Move closer to the base station
• The handset LCD displays nothing • Tr y again by disconnecting and connecting
the base station power supply and follow
the procedure to register a handset
• Make sure the two supplied rechargeable
batteries have been inserted into the
battery compar tment
• Make sure the supplied batteries are
charged up
• Caller Line Identification • Check your subscription with your
(CLI) service does not work network operator
Need help?
User Manual
See the User manual that came with your CD140 or CD145.
Online help
www.philips.com/support
3111 285 32532
Loading...