Philips CCZ252AT User Manual

Owner’s Manual
Important!
Return your Warranty Registration
Card within 10 days. See why inside.
Color TV with built-in VCR
CCZ252AT
CCZ252comb.QX33 4/6/99 8:50 PM Page 1
Return your Warranty Registration card today to
ensure you receive all the
benefits
you’re entitled to.
For Customer Use
Enter below the Serial No. which is located on the rear of the cabinet. Retain this information for future refer­ence.
Model No. ______________ Serial No. ______________
Congratulations on your purchase, and welcome to the “family!”
Dear PHILIPS MAGNAVOX product owner:
Thank you for your confidence in PHILIPS MAGNAVOX. You’ve selected one of the best-built, best-backed products available today. And we’ll do everything in our power to keep you happy with your purchase for many years to come. As a member of the PHILIPS MAGNAVOX “family,” you’re enti­tled to protection by one of the most comprehensive warranties and outstanding service networks in the industry. What’s more, your purchase guarantees you’ll receive all the infor­mation and special offers for which you qualify, plus easy access to accessories from our convenient home shopping network. And most importantly you can count on our uncompromising commitment to your total satisfaction. All of this is our way of saying welcome-and thanks for investing in a PHILIPS MAGNAVOX product.
Sincerely,
Robert Minkhorst President and Chief Executive Officer
P.S. Remember, to get the most from your PHILIPS
MAGNAVOX product, you must return your Warranty Registration Card within 10 days. So please mail it to us right now!
Know these
safetysymbols
This “bolt of lightning” indicates
uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your house­hold, please do not remove product covering.
The “exclamation point” calls
attention to features for which
you should read the enclosed lit­erature closely to prevent operating and maintenance problems.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
CAUTION: To prevent electric shock, match wide blade of plug to wide slot, and fully insert.
ATTENTION: Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la borne corre­spondante de la prise et pousser jusqu’au fond.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
R
E
G
I
S
T
R
A
T
I
O
N
N
E
E
D
E
D
W
I
T
H
I
N
1
0
D
A
Y
S
Hurry!
t
s
Warranty Verification
Registering your product within 10 days confirms your right to max­imum protection under the terms and conditions of your PHILIPS MAGNAVOX warranty.
Owner Confirmation
Your completed Warranty Registration Card serves as verification of ownership in the event of product theft or loss.
Model Registration
Returning your Warranty Registration Card right away guar­antees you’ll receive all the informa­tion and special offers which you qualify for as the owner of your model.
Visit our World Wide Web Site at http://www.philipsmagnavox.com
CCZ252comb.QX33 4/6/99 8:50 PM Page 2
Introduction 3
• Before doing anything else, record the TV/VCR’s model and serial num­bers in the spaces provided on page two. These numbers will help us assist you if you ever call for help.
Helpful Hint
Features
• A-B Repeat Play
• Automatic Channel Setup
• Automatic Operation Features
• Automatic Tracking Adjustment
• Closed Caption
• Daylight-Saving Time
• High Quality (HQ) System
• On-Screen displays in English or Spanish
• On-Screen Menu Programming, accessible with remote control or front panel buttons
• One-Touch Recording
• Real-Time Counter
• Remote Control
• Repeat Play
• Sleep Timer
• SmartClock
TM
• Special Effects Playback: Forward and Reverse Searching; Still
• Timer Recording
Safety Precautions
Warning: To prevent fire or shock hazard, do not expose this equipment to rain or moisture. FCC Warning: Any unauthorized changes or modifications to this equipment void the user’s authority to operate it. This TV/VCR, equipped with a High Quality (HQ) system, is com­patible with existing Video Home System (VHS) equipment.
Philips Consumer Electronics Company recommends that you use only video cassette tapes that have been tested and inspected for use in two, four, six, and eight hour VCRs, and which are labeled with the mark. The use of tapes that have not been inspected for use in two, four, six, and eight hour VCRs may result in poor picture quality and excessive deposits on the video heads, which may not be covered by the warranty if damage occurs.
Note to the Cable TV System Installer: This reminder is provided to call the Cable TV system installer’s attention to Article 820-40 of the National Electrical Code, which provides guidelines for proper grounding – in particular, specifying that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as possible.
SmartClockTMis a trademark of Philips Consumer Electronics Company. Copyright 1998 Philips Consumer Electronics Company. All rights reserved.
Welcome to your TV/VCR owner’s manual.
This manual has six sections: Setting Up Your TV/VCR; Description of Controls; Basic Operations; Recording Options; Playing Options; and Information You May Need. The instructions explain all of the TV/VCR’s features, which are listed below.
CCZ252comb.QX33 4/6/99 8:50 PM Page 3
4 Table of Contents
Setting Up Your TV/VCR
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Before Using the TV/VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Hooking Up the TV/VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 - 7
Turning On the TV/VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Language Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Automatic Channel Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 - 11
Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 - 17
Daylight-Saving Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Time Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Description of Controls
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Remote Control Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 - 23
Adjusting the Picture Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 - 25
On-Screen Status Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Reminder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 7
Basic Operations
Playing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Recording Options
One-Touch Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Rerecording (Tape Duplication) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 - 35
Record Defeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Playing Options
Setting the Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Closed Caption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38 - 39
Volume Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
A - B Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42 - 43
Real-Time Counter Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Automatic Operation Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Playback Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Information You May Need
Specifications / Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Helpful Hints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 - 49
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
CCZ252comb.QX33 4/6/99 8:50 PM Page 4
• The remote control and its batteries are supplied.
• Do not mix alkaline and man­ganese batteries.
• Do not mix old and new batteries.
Before Using the TV/VCR 5
Putting Batteries in the Remote Control
1
Remove the battery compartment lid on the bottom of the remote control by sliding it in the direction of the arrow.
2
Place two AA batteries inside the battery compartment with their +and –ends aligned as indicated.
3
Replace the battery compartment lid.
Using the Remote Control
Point the remote control at the TV/VCR’s remote sensor.
Do not put objects between the remote control and the
TV/VCR.
Helpful Hints
1 2
1 2
3
TV/VCR Maintenance
In this TV/VCR, use only tapes with the mark.
Make sure any light adhesive stick-on notes are removed from
the video cassette tape before putting the tape in the TV/VCR. Removable labels like these can jam the TV/VCR.
Periodic maintenance is required to maintain your TV/VCR’s
excellent performance. This TV/VCR has an automatic head cleaning system. However, the video heads will eventually require cleaning or replacement. Cleaning or replacement of the video heads should be performed by an authorized service cen­ter.
Video cassette tapes have record tabs to ensure that recordings are not accidentally erased.
1
To prevent accidental erasure, break off the tab with a screwdriver.
2
To record again, cover the hole with cellophane tape.
Erasure Prevention
CCZ252comb.QX33 4/6/99 8:50 PM Page 5
IN
OUT
ANT.
ANT.
ANT.
ANT.
6 Hooking Up the TV/VCR
Hooking Up Your TV/VCR With a Cable Signal or Outdoor Antenna
Connect an RF coaxial cable (75­ohm, not supplied) to the OUT Jack on the Cable Box and to the ANT(enna) Jack on the TV/VCR.
Connect a Cable signal or an anten­na to the ANT(enna) Jack.
Hooking Up Your TV/VCR With a Cable Box
To view any channel, set the TV/VCR to the Cable Box output channel (channel 03 or 04). Then, select channels at the Cable Box.
1
Hook up your TV/VCR using one of the connections shown.
A.
B.
Hooking Up Your TV/VCR With an Indoor Antenna
To install a rod antenna (not supplied), push the stem of the antenna into the antenna hole on the top of the TV/VCR. Connect the antenna wire to the ANT(enna) Jack on the back of the TV/VCR as shown. Extend the antenna and adjust its length, direction, and angle for the clearest picture.
C.
Connect the Cable signal to the IN Jack on the Cable Box.
ANT.
ANT.
Rod Antenna
(not supplied)
CCZ252comb.QX33 4/6/99 8:50 PM Page 6
Hooking Up the TV/VCR (cont’d) 7
AUDIO
POWERSTOP REWPLAY F.FWDREC/OTR VOLUME CHANNEL EARPHONE
EJECT
REC
OUT
IN
VIDEO
IN
OUT
3CH 4CH
AUDIO
ANT.
OUT
IN
VIDEO
IN
OUT
3CH 4CH
AUDIO
ANT.
VIDEOAUDIO
• Before connecting the rod antenna or coaxial cable to the ANT(enna) Jack, make sure the pin is not bent. If the pin is bent, straighten it as illustrated, then connect it to the ANT(enna) Jack.
• Audio and video cables are not supplied.
Helpful Hints
Crooked Pin
Straight Pin
Hooking Up Your TV/VCR to Another Video Source (VCR or Camcorder)
You may need this connection if you want to copy tapes.
Details are on page 31.
AUDIO/VIDEO Jacks on front of TV/VCR
AUDIO/VIDEO OUT Jacks on VCR
Use an Audio cable to connect the AUDIO OUT Jack on the VCR to the AUDIO (In) Jack on the front of the TV/VCR.
Use a Video cable to connect the VIDEO OUT Jack on the VCR to the VIDEO (In) Jack on the front of the
2
Plug in the TV/VCR.
3
Before you turn on the TV/VCR, go to page eight.
D.
CCZ252comb.QX33 4/6/99 8:50 PM Page 7
8 Turning On the TV/VCR
Before you turn on the TV/VCR, make sure there are batteries in the remote control and the TV/VCR is hooked up correctly. The instructions on this page work only when you turn on the TV/VCR for the first time.
1
Press the POWER button. The TV/VCR will come on and the
screen shown below will appear.
2
Press the Number 1 button to select English on-screen displays or press the Number 2 button to select Spanish on-screen displays.
3
Press the STATUS/EXIT button. The screen shown below
will appear.
SELECT LANGUAGE 1 ENGLISH ON 2 ESPAÑOL
MAKE SELECTION OR PRESS EXIT TO CONTINUE
3
4
Press the F.FWD/B button to begin automatic channel setup. The TV/VCR will memorize all available channels. When
channels are set, CHANNELS ARE SET will appear on-screen briefly. Then the TV/VCR will go to the lowest channel pro­grammed.
CONNECT ANTENNA OR CABLE TO TVCR
THEN PRESS B
TO END PRESS EXIT
5
Use the CHANNEL o/p buttons or the Number buttons on the remote control to select a TV/VCR channel. Use the VOLUME o/p buttons to adjust the sound.
• If you do not see any on-screen dis­plays when you turn on the TV/VCR, check your hookups, then try again. If you still do not see any on-screen displays, follow the steps on pages nine - 10 to select a language and set up channels.
• To skip step 2, press the STATUS/EXIT button. All on-screen displays will be inEnglish. To skip step 4, press the STATUS/EXITbut­ton. Channels will not be set up, and CHANNELS NOT SET will appear on-screen briefly.
• You cannot set up channels if you are using a Cable Box.
• Line Input mode will always be stored in the TV/VCR’s memory as channel 00. When you select chan­nel 00, A/V IN will appear on­screen briefly. Press the CHANNEL o/p buttons or Number buttons to select another channel.
Helpful Hints
1 2
4
5
CCZ252comb.QX33 4/6/99 8:50 PM Page 8
POWER
1
4
7
SPEED
REW
REC/OTR
MENU
23
56
89
0
o
PLAY
STOP
p
MEMORY
PAUSE/STILL
STATUS/EXIT
+100
MUTE
CLEAR
CHANNEL
VOLUME
F.FWD
TRACKING
SLEEP
ALT.CH
o
p
o
p
o
p
Language Selection 9
Follow the steps below to change the language of the on-screen displays.
3
Press the Number 1 button to choose SELECT LAN­GUAGE.
4
Press the Number 1 button if you want the on-screen dis­plays in English. ONwill appear to the right of ENGLISH on- screen. Or, press the Number 2 button if you want the on­screen displays in Spanish. SI will appear to the right of
ESPAÑOL on-screen.
5
Press the STATUS/EXIT button.
SELECT LANGUAGE
1 ENGLISH ON 2 ESPAÑOL
MAKE SELECTION OR PRESS EXIT TO CONTINUE
1
Press the MENU button.
2
Press the PLAY/button or the STOP/button to select PRIM. SETUP. Then, press the F.FWD/B button.
PRIMARY SETUP
1 SELECT LANGUAGE 2 AUTO PROGRAMMING 3 ADD/DELETE CHANNEL 4 CH. MEMORY REVIEW 5 VOLUME BAR [ON] 6 SET CLOCK
TO SELECT PRESS NUMBER TO END PRESS EXIT
> PRIM. SETUP
VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS
PRESS B
2
1 5
4
3
• If you accidentally select Spanish on-screen displays and need English on-screen displays:
1) Press the MENU button.
2) Press the PLAY/o button or the STOP/p button to select PREPARA­CION, then press the F.FWD/B button.
3) Press the Number1 button to select SELECCION IDIOMA.
4) Press the Number1 button to select ENGLISH.
5) Press the STATUS/EXIT button.
Helpful Hint
CCZ252comb.QX33 4/6/99 8:50 PM Page 9
POWER
1
4
7
SPEED
REW
REC/OTR
MENU
23
56
89
0
o
PLAY
STOP
p
MEMORY
PAUSE/STILL
STATUS/EXIT
+100
MUTE
CLEAR
CHANNEL
VOLUME
F.FWD
TRACKING
SLEEP
ALT.CH
o
p
o
p
o
p
10 Automatic Channel Setup
Although the TV/VCR may automatically memorize the channels you receive when you turn it on for the first time, you may set up channels again by following the steps below.
1
Press the MENU button.
TO ADJUST PRESS s /B
> INPUT
EXIT PRIM. SETUP VCR PROGRAM VCR SETUP CAPTION
CABLE
2
Press the PLAY/button or the STOP/button to select INPUT. Press the REW(ind)/s button or the F.FWD/B button until ANTENNA or CABLE (whichever you have) appears beside INPUT.
3
Press the STOP/button repeatedly to select PRIM. SETUP, then press the F.FWD/B button.
PRIMARY SETUP
1 SELECT LANGUAGE 2 AUTO PROGRAMMING 3 ADD/DELETE CHANNEL 4 CH. MEMORY REVIEW 5 VOLUME BAR [ON] 6 SET CLOCK
TO SELECT PRESS NUMBER TO END PRESS EXIT
4
Press the Number 2 button to select AUTO PROGRAM­MING. AUTO PROGRAMMING MEMORIZED CH... will appear
on-screen. The TV/VCR will memorize all available channels.
• Line Input mode will always be stored in the TV/VCR’s memory as channel 00. You cannot delete it. To exit line input mode, press the CHANNEL /buttons or the Number buttons to select another channel.
• You cannot program channels when the TV/VCR is on channel 00 (A/V INPUT will appear beside INPUT at step 2). Select ANTENNA or CABLE at step 2.
Helpful Hints
5
Wait for a few minutes. When setup is complete, CHANNELS
ARE SET will appear on-screen. Then the programming of the lowest channel number placed in the TV/VCR’s memory will appear on-screen. Now, when you press the CHANNEL / buttons, you will scan only through channels you receive.
1
4
2
5
3
Wait for the TV/VCR to set up channels.
> PRIM. SETUP
VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS
PRESS B
CCZ252comb.QX33 4/6/99 8:50 PM Page 10
POWER
23
1
56
4
89
7
0
SPEED
o
PLAY
REW
REC/OTR
MENU
MEMORY
STATUS/EXIT
STOP
p
PAUSE/STILL
CLEAR
+100
MUTE
CHANNEL
VOLUME
F.FWD
TRACKING
SLEEP
ALT.CH
o
p
o
p
o
p
6
Automatic Channel Setup (cont’d) 11
5
Within five seconds, press the Number 1 button to add that channel or the Number 2 button to delete that chan­nel. If you do not make a choice within five seconds, you will
return to the previous screen. (If you make a mistake, press the Number 3 button to select another channel.)
6
Press the STATUS/EXIT button.
Programming of the channel you added or deleted will appear.
3
Press the Number 3 button to select ADD/DELETE CHANNEL.
SELECT CHANNEL NUMBER
CH – –
TO END PRESS EXIT
4
Press the Number buttons to enter the channel number you want to add or delete. You must enter a zero before single-digit channels.
CH 12
1 ADD 2 DELETE 3 SELECT ANOTHER CH
TO SELECT PRESS NUMBER TO END PRESS EXIT
• To review the channels memorized by the TV/VCR, follow these steps.
1) Press the MENU button.
2) Press the PLAY/button or the STOP/button to select PRIM. SETUP. Press the F.FWD/B button.
3) Press the Number 4 button to select CH. MEMORY REVIEW. A list of programmed channels will appear on-screen.
4) If all the programmed channels don’t fit on-screen, press the Number 1 button. If you do not press the Number 1 button within 10 seconds, the remaining channels will appear on-screen. (If there are no remaining channels, the previous menu will appear.) Or press the Number 2 button to see the previ­ous screen of channels.
5) Press the STATUS/EXIT button.
Helpful Hint
1
Press the MENU button.
2
Press the PLAY/button or the STOP/button to select PRIM. SETUP, then press the F.FWD/B button.
PRIMARY SETUP
1 SELECT LANGUAGE 2 AUTO PROGRAMMING 3 ADD/DELETE CHANNEL 4 CH. MEMORY REVIEW 5 VOLUME BAR [ON] 6 SET CLOCK
TO SELECT PRESS NUMBER TO END PRESS EXIT
Adding/Deleting Channels
1
3 4
5 2
> PRIM. SETUP
VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS
PRESS B
CCZ252comb.QX33 4/6/99 8:50 PM Page 11
POWER
23
1
56
4
89
7
+100
0
MEMORY
STATUS/EXIT
o
PLAY
STOP
p
PAUSE/STILL
MUTE
CLEAR
SPEED
REW
REC/OTR
MENU
CHANNEL
VOLUME
F.FWD
TRACKING
SLEEP
ALT.CH
o
p
o
p
o
p
12 Setting the Clock
• Entries that do not match the TV/VCR’s calendar will cause a question mark to appear on screen.
• To make corrections while you are setting the clock, press the CLEAR button until the space for the num­ber you want to correct is flashing. Then enter the correct number.
Helpful Hints
2 1
There are three ways to set the clock: Manually, with Automatic PBS Channel Selection, or with Manual PBS Channel Selection. With manual clock setting, you tell the TV/VCR the current time. With Automatic or Manual PBS Channel Selection, the TV/VCR gets the time from your local PBS station. If you use either Manual PBS Channel Selection or Automatic PBS Channel Selection, fol­low the steps on page 19 to have the TV/VCR maintain the clock according to your Time Zone. To set the clock manually, follow the steps on pages 12 -13. To set the clock using Automatic PBS Channel Selection, follow the steps on pages 14 - 15. To set the clock using Manual PBS Channel Selection, follow the steps on pages 16 - 17. Before you begin, make sure:
The TV/VCR is hooked up and turned on.
Channels are set up.
You make each entry within 60 seconds of the previous entry.
(If you do not, you may start again at step 1.)
Manual Clock Setting
1
Press the MENU button.
2
Press the PLAY/button or the STOP/button to select PRIM. SETUP. Then, press the F.FWD/B button.
PRIMARY SETUP
1 SELECT LANGUAGE 2 AUTO PROGRAMMING 3 ADD/DELETE CHANNEL 4 CH. MEMORY REVIEW 5 VOLUME BAR [ON] 6 SET CLOCK
TO SELECT PRESS NUMBER TO END PRESS EXIT
> PRIM. SETUP
VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS
PRESS B
SET CLOCK
1AUTO CLOCK [ON] 2SET MANUAL CLOCK 3DAYLIGHT SVG.TIME [ON] 4SET TIME ZONE
[AUTO]
TO CONTINUE PRESS MENU TO SELECT PRESS NUMBER TO END PRESS EXIT
3
Press the Number 6 button to select SET CLOCK.
3
CCZ252comb.QX33 4/6/99 8:50 PM Page 12
POWER
1
4
7
SPEED
REW
REC/OTR
MENU
23
56
89
0
o
PLAY
STOP
p
MEMORY
PAUSE/STILL
STATUS/EXIT
+100
MUTE
CLEAR
CHANNEL
VOLUME
F.FWD
TRACKING
SLEEP
ALT.CH
o
p
o
p
o
p
Setting the Clock (cont’d) 13
5
Press two Number buttons for the hour(s) and two Number buttons for the minute(s). Then press 1 for AM or 2 for PM. For example, for 9:30 PM, press 09, 30, 2.
SET MANUAL CLOCK
TIME 09 : 30 PM MONTH – – / – – / – –
TO CORRECT PRESS CLEAR TO END PRESS EXIT
6
Press two Number buttons for the month, two Number buttons for the day, and two Number buttons for the year. For example, for July 1, 1998, press 07, 01, 98. The day of
the week will appear automatically.
7
Press the STATUS/EXIT button.
SET MANUAL CLOCK
TIME 09 : 30 PM DATE 07 / 01 / 98
WEDNESDAY
TO CORRECT PRESS CLEAR TO END PRESS EXIT
4
Press the Number 2 button to select SET MANUAL CLOCK.
SET MANUAL CLOCK
TIME – – : – – DATE – – / – – / – –
TO END PRESS EXIT
5-6
4
7
REW
PLAY
POWER
SPEED
MUTE
SLEEP
ALT.CH
CHANNEL
VOLUME
REC/OTR
STATUS/EXIT
MEMORY
PAUSE/STILL
MENU
CLEAR
TRACKING
STOP
F.FWD
o
o
p
p
o
p
o
p
1
23
4
56
7
89
0
+100
CCZ252comb.QX33 4/6/99 8:50 PM Page 13
14 Setting the Clock (cont’d)
Automatic PBS Channel Selection
4
If ON appears beside AUTO CLOCK, press the MENU button. If OFF appears beside AUTO CLOCK, press the Number 1 button so that ON appears to the right of AUTO CLOCK, then press the MENU button.
1
Press the MENU button.
2
Press the PLAY/button or the STOP/button to select PRIM. SETUP. Then, press the F.FWD/B button.
PRIMARY SETUP
1 SELECT LANGUAGE 2 AUTO PROGRAMMING 3 ADD/DELETE CHANNEL 4 CH. MEMORY REVIEW 5 VOLUME BAR [ON] 6 SET CLOCK
TO SELECT PRESS NUMBER TO END PRESS EXIT
> PRIM. SETUP
VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS
PRESS B
SET CLOCK
1 AUTO CLOCK [ON] 2 SET MANUAL CLOCK 3 DAYLIGHT SVG.TIME [ON] 4 SET TIME ZONE
[AUTO]
TO CONTINUE PRESS MENU TO SELECT PRESS NUMBER TO END PRESS EXIT
3
Press the Number 6 button to select SET CLOCK.
2 1
3
4
AUTO CLOCK
AUTO CLOCK USES
PBS CHANNEL DATA
1 SET PBS CH. AUTO 2 SET PBS CH. MANUAL
TO SELECT PRESS NUMBER TO END PRESS EXIT
CCZ252comb.QX33 4/6/99 8:50 PM Page 14
POWER
1
4
7
SPEED
REW
REC/OTR
MENU
23
56
89
0
o
PLAY
STOP
p
MEMORY
PAUSE/STILL
STATUS/EXIT
+100
MUTE
CLEAR
CHANNEL
VOLUME
F.FWD
TRACKING
SLEEP
ALT.CH
o
p
o
p
o
p
Setting the Clock (cont’d) 15
7
When the TV/VCR finds the PBS channel, the time will appear on-screen. Press the STATUS/EXIT button.
6
NOW SEARCHING flashes on the TV/VCR screen. However, you may see the message “PLEASE TURN OFF TO SET AUTO CLOCK PLEASE WAIT SEVERAL MINUTES.” If this mes­sage appears, turn off the TV/VCR for a few minutes. When you turn on the TV/VCR, the time will be set. If the time is not set, repeat steps 1 - 5. Or, follow the steps on pages 12 - 13 to set the clock manually or pages 16 - 17 to set the clock with Manual PBS Channel Selection.
If CANNOT FIND CLOCK DATA flashes on the
TV/VCR screen, you will be prompted to turn off the TV/VCR. Turn off the TV/VCR. Leave it off for several min-
utes. When you turn on the TV/VCR again, the clock will be set.
• To display the time, press the STA­TUS/EXIT button. A status display, which includes the time, will appear on the TV/VCR screen. Details are on page 26.
• You must turn off the TV/VCR for several minutes during automatic clock setting. If the clock is not set when you turn on the TV/VCR, repeat the steps for Automatic PBS Channel Selection. If the clock still is not set, set the clock manually.
• You cannot use the AUTO CLOCK feature if you don’t receive a PBS channel that carries a time signal in your area. Set the clock manually.
• Cable Box users must set the clock manually.
Helpful Hints
5
Press the Number 1 button to select SET PBS CH. AUTO.
SET AUTO CLOCK
TIME – – : – – DATE – – / – – / – – NOW SEARCHING
TO END PRESS EXIT
SET AUTO CLOCK
TIME 06 : 30 PM DATE 07 / 01 / 98
WEDNESDAY
TO END PRESS EXIT
SET AUTO CLOCK
TIME – – : – – DATE – – / – – / – –
CANNOT FIND CLOCK DATA TO END PRESS EXIT
5
6
7
Wait for the TV/VCR to find the time.
CCZ252comb.QX33 4/6/99 8:50 PM Page 15
POWER
23
1
56
4
7
SPEED
REW
REC/OTR
MENU
89
0
MEMORY
STATUS/EXIT
o
PLAY
STOP
p
PAUSE/STILL
+100
MUTE
CLEAR
CHANNEL
VOLUME
F.FWD
TRACKING
SLEEP
ALT.CH
o
p
o
p
o
p
16 Setting the Clock (cont’d)
Manual PBS Channel Selection
4
If ON appears beside AUTO CLOCK, press the MENU button. If OFF appears beside AUTO CLOCK, press the Number 1 button so that ON appears to the right of AUTO CLOCK, then press the MENU button.
1
Press the MENU button.
2
Press the PLAY/button or the STOP/button to select PRIM. SETUP. Then, press the F.FWD/B button.
PRIMARY SETUP
1 SELECT LANGUAGE 2 AUTO PROGRAMMING 3 ADD/DELETE CHANNEL 4 CH. MEMORY REVIEW 5 VOLUME BAR [ON] 6 SET CLOCK
TO SELECT PRESS NUMBER TO END PRESS EXIT
> PRIM. SETUP
VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS
PRESS B
SET CLOCK
1 AUTO CLOCK [ON] 2 SET MANUAL CLOCK 3 DAYLIGHT SVG.TIME [ON] 4 SET TIME ZONE
[AUTO]
TO CONTINUE PRESS MENU TO SELECT PRESS NUMBER TO END PRESS EXIT
3
Press the Number 6 button to select SET CLOCK.
2 1
3
4
AUTO CLOCK
AUTO CLOCK USES
PBS CHANNEL DATA
1 SET PBS CH. AUTO 2 SET PBS CH. MANUAL
TO SELECT PRESS NUMBER TO END PRESS EXIT
CCZ252comb.QX33 4/6/99 8:50 PM Page 16
POWER
1
4
7
SPEED
REW
REC/OTR
MENU
23
56
89
0
o
PLAY
STOP
p
MEMORY
PAUSE/STILL
STATUS/EXIT
+100
MUTE
CLEAR
CHANNEL
VOLUME
F.FWD
TRACKING
SLEEP
ALT.CH
o
p
o
p
o
p
Loading...
+ 36 hidden pages