Philips CCZ194AT User Manual
Color TV wich built-in VCR
CCZI94AT
Owner’s Manual
Importanti
Return your Warranty Registration
Card within 10 days^ See why inside.
Return your Warranty Registration card today to
ensure you receive all the benefits you’re entitled to.
Once your PHILIPS MAGNAVOX purchase is registered, you’re eligible to receive all the privileges
of owning a PHILIPS MAGNAVOX product So complete and return the Warranty Registration
Card enclosed with your purchase at once. And take advantage of these important benefits.
Warranty
Verification
Registering your product within
10 days confirnns your right to max
imum protection under the
terms and conditions of your
PHILIPS MAGNAVOX warranty.
PHILIPS
Congratulations on your purchase, and
welcome to the “family!**
MAGNAVOX
Owner
Confirmation
Your completed Warranty
Registration Card serves as
verification of ownership in the
event of product theft or loss.
Dear PHILIPS MAGNAVOX product owner:
Thank you for your confidence in PHILIPS MAGNAVOX.You’ve
selected one of the best-built, best-backed products available today.
And we’ll do everything in our power to keep you happy with your
purchase for many years to come.
As a member of the PHILIPS MAGNAVOX “family,” you’re entitled
to protection by one of the most comprehensive warranties and
outstanding service networks in the industry.
What’s more, your purchase guarantees you’ll receive all the infor
mation and special offers for which you qualify, plus easy access to
accessories from our convenient home shopping network.
And most importantly you can count on our uncompromising
commitment to your total satisfaction.
All of this is our way of saying welcome-and thanks for investing in
a PHILIPS MAGNAVOX product.
Sincerely,
Model
Registration
Returning your Warranty
Registration Card right away guar
antees you’ll receive all the informa
tion and special offers which you
qualify for as the owner of your
model.
Know these
S3,f©ty symbo/s
RISK OF ELECTRIC SHOCK
A
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK]. NO USERSERVICEABLE PARTS
INSIDE. REFER SERVICING TO OUAUnED SERVICE PERSONNEL.
This “bolt of lightning” indicates
A
uninsulated material within your
unit may cause an electrical shock. For
the safety of everyone in your househoid, piease do not remove product
covering.
The “exclamation point” calls
A
attention to features for which
you should read the enclosed lit
erature closely to prevent operating
and maintenance problems.
WARNING; TO PREVENT FIRE OR
SHOCK HAZARD, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR
MOISTURE.
CAUTION: To prevent electric shock,
match wide blade of plug to wide slot,
and fully insert.
ATTENTION: Pour éviter les chocs
électriques, introduire la lame la plus
large de la fiche dans la borne corre
spondante de la prise et pousser
jusqu’au fond.
DO NOT OPEN
A
Robert Minkhorst
President and Chief Executive Officer
P.S. Remember, to get the most from your PHILIPS
PHILIPS
MAGNAVOX product, you must return your
Warranty Registration Card within 10 days. So
please mail it to us right now!
MAGNAVCSC
Vis/'t our World Wide Web Site at http://www.phlllpsmagnavox.com
For Customer Use
Enter below the Serial No.
which is located on the rear
of the cabinet. Retain this
information for future refer
ence.
Model No.
Serial No.
____________________
_____________________
Introduction 3
Welcome to yourTV/VCR owner’s manual.
This manual has six sections: Setting Up YourTV/VCR; Description of Controls; Basic Operations; Recording
Options; Playing Options; and Information You May Need. The instructions explain all of the TV/VCR’s fea
tures, which are listed below.
Features
A-B Repeat Play
Automatic Channel Setup
Automatic Operation Features
Automatic Tracking Adjustment
Closed Caption
Daylight-Saving Time
High Quality (HQ) System
Index Search
On-Screen displays in English or Spanish
On-Screen Menu Programming, accessible with remote control or front panel but
tons
One-Touch Recording
Real-Time Counter
Remote Control with capability to operate a Cable Box or Direct Broadcast System
Remote Locator
Repeat Play
Skip Search
Sleep Timer
SmartClock™
Smart Picture
Special Effects Playback: Forward and Reverse Searching: Still;Variable Slow; Frame
Advance
Timer Recording
VCR Plus+ Programming System
Safety Precautions
Warning:To prevent fire or shock hazard, do not expose this equipment to rain or
moisture.
FCC Warning: Any unauthorized changes or modifications to this equipment void the
user’s authority to operate it.
This device complies with part 15 of the FCC Rules. Operation is subject to the follow
ing two conditions: ( I ) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
ThisTV/VCR, equipped with a High Quality (HQ) system, is compatible with existing
Video Home System (VHS) equipment.
Philips Consumer Electronics Company recommends that you use only video cas
sette tapes that have been tested and inspected for use in two, four, six, and eight hour
VCRs, and which are labeled with the IVHSI mark. The use of tapes that have not been
inspected for use in two, four, six, and eight hour VCRs may result in poor picture quality
and excessive deposits on the video heads, which may not be covered by the warranty if
damage occurs.
Note to the Cable TV System Installer: This reminder is provided to call the
Cable TV system installer’s attention to Article 820-40 of the National Electrical Code,
which provides guidelines for proper grounding - in particular, specifying that the cable
ground shall be connected to the grounding system of the building, as close to the
point of cable entry as possible.
SmartClock™ is a trademark of Philips Consumer Electronics Company.
Copyright 1998 Philips Consumer Electronics Company. All rights reserved.
4 Table of Contents
Setting UpYourTVA^CR
Introduction ...................................................................................................................... 3
Table of Contents.............................................................................................................. 4
Before Using the TV/VCR...................................................................................................5
Hooking Up the TV/VCR
Turning On the TV/VCR ....................................................................................................8
Language Selection ..........................................................................................................9
Automatic Channel Setup .........................................................................................10 - 11
Setting the Clock......................................................................................................12-17
Daylight-Saving Time ..................................................................................................... 18
Time Zone ...................................................................................................................... 19
Setting the Remote to Operate a Cable Box/DBS...................................................20-21
Description of Controls
Front Panel .....................................................................................................................22
Rear Panel.......................................................................................................................23
Remote Control Buttons..........................................................................................24-25
Adjusting the Picture Controls .........................................................................................26
Smart Picture ..................................................................................................................27
Remote Locator ..............................................................................................................28
On-Screen Status Displays
Reminder ........................................................................................................................30
................................................................................................
............................................................................................
6-7
29
Basic Operations
Playing............................................................................................................................31
Recording...................................................................................................................... 32
Recording Options
One-Touch Recording.....................................................................................................33
Rerecording (Tape Duplication).......................................................................................34
Timer Recording ......................................................................................................35-38
Setting Up the VCR Plus+ Programming System .................................................. 39-40
Timer Recording With the VCR Plus+ Programming System ...................................41 - 42
Defeat Recording ........................................................................................................... 43
Playing Options
Setting the Sleep Timer...................................................................................................44
Closed Caption ....................................................................................................... 45-46
Volume Bar......................................................................................................................47
Repeat Play.....................................................................................................................48
A - B Repeat Play.....................................................................................................49-50
Real-Time Counter Memory............................................................................................51
Index Search................................................................................................................... 52
Automatic Operation Features ........................................................................................53
Playback Options ............................................................................................................54
Information You May Need
Specifications / Glossary.................................................................................................55
Helpful Hints ............................................................................................................56-57
Limited Warranty ............................................................................................................ 58
Index................................................................................................................................59
Supplied Accessories..................................................................................................... 60
Putting Batteries in the Remote Control
Remove the battery compartment lid on the bottom of
the remote control by pressing in the tab and lifting the
lid.
2
Place three AA batteries inside the battery compartment
with their + and - ends aligned as indicated.
Before Using the TVIVCR
5
Replace the battery compartment lid.
Erasure Prevention
Video cassette tapes have record tabs to ensure that recordings
are not accidentally erased.
To prevent accidental erasure, break off the tab with a
screwdriver.
2
To record again, cover the hole with cellophane tape.
Using the Remote Control
s
Press the COMBI button, then point the remote control at the
TV/VCR’s remote sensor when using the remote control to
operate theTV/VCR. Press the CABLE/DBS button, then point
the remote control at the Cable Box/DBS when using the
remote control to operate the Cable Box/DBS.
• Do not put objects between the remote control and the
TV/VCR.
3
2
VCR Maintenance
s In this TV/VCR, use only tapes with the IVHSI mark.
* Make sure any light adhesive stick-on notes are removed from
the video cassette tape before putting the tape in the TV/VCR.
Removable labels like these can jam the TV/VCR.
i Periodic maintenance is required to maintain your TV/VCR’s
excellent performance. This TV/VCR has an automatic head
cleaning system. However, the video heads will eventually require
cleaning or replacement. Cleaning or replacement of the video
heads should be performed by an authorized service center.
Helpful Hints
The remote control and its batteries
are supplied.
Do not mix alkaline and man
ganese batteries.
Do not mix old and new batteries.
6
Hooking
up
The TVIVCR
Hook up yourTVA^CR using one of the connections shown.
Aki
Hooking UpYourTV/VCR With a Cable Signal or Outdoor Antenna
B.
Hooking UpYourTV/VCR With a Cable Box
To view any channel, set theTV/VCR
to the Cable Box output channel
(channel 03 or 04). Then, select chan
nels at the Cable Box.
Hooking UpYourTV/VCR
With an Indoor Antenna
To install a rod antenna (not sup
plied), push the stem of the antenna
into the antenna hole on the top of
the TV/VCR. Connect the antenna
wire to the ANT(enna) Jack on the
back of the TV/VCR as shown.
Extend the antenna and adjust its
length, direction, and angle for the
clearest picture.
Connect the Cable signal to
the IN Jack on the Cable Box.,
Connect an RF coaxial cable (75ohm, not supplied) to the OUT Jack
on the Cable Box and to the
ANT(enna) Jack on theTV/VCR.
f iiiiiili—
Rod Antenna
(not supplied)
D.
Hooking Up Your
TV/VCR to Another
Video Source
(VCR or Camcorder)
You may need this connection
if you want to copy tapes.
Details are on page 34.
Hooking
Up The TVIVCR
(cont’d) 7
VCR to the VIDEO Jack on the front of the TV/VCR.
2
Plug in theTVA^CR.
3
Before you turn on the TV/VCR, go to page eight.
Helpful Hints
Before connecting an antenna or cable signal to iheANT(enna) Jack, make sure the pin is not bent If the pin is
bent, straighten it as illustrated, then connect the antenna or cable signal to the ANT(enna) jack.
Audio and video cables are not supplied.
Straight Pin
8
Turning On the TV/YCR
Before you turn on theTV/VCR, make sure there are batteries in
the remote control and theTV/VCR is hooked up correctly.
The instructions on this page work only when you turn on the
TV/VCR for the first time.
Press the POWER button. The TV/VCR will come on and the
screen shown below will appear.
SELECT LANGUAGE \
> ENGLISH ON
ESPAÑOL
SELECT AT OR
PRESS MENU TO CONTINUE
2
Press the PLAY/a button or the STOP/T button to select
English or Spanish on-screen displays.
3
Press the MENU button. The screen shown below will appear.
' CONNECTAr'iTHMslA OR CABl£
TOTVCR
THEN PRESS I
TO END PRESS EXIT
4
Press the F.FWD/^ button to begin automatic channel
setup. The TV/VCR will memorize all available channels. When
channels are set, CHANNELS ARE SET will appear on-screen
briefly.Then theTV/VCR will go to the lowest channel pro
grammed.
(If you try to set up channels when there is no antenna or cable
connected to the TV/VCR, programming will appear to take place,
but eventually a NO TV SIGNALS ... message will appear on
screen. Connect an antenna or cable to the TV/VCR, then try
again.You may need to follow the steps on page 10 instead.)
5
Use the CH(annel). Up/Down buttons or the Number but
tons on the remote control to select a TV/VCR channel.
Use the VOL(ume). Up/Down buttons to adjust the sound.
Helpful Hints
If you do not see any on-screen dis
plays when you turn on the TV/VCR,
check your hookups, then try again.
If you still do not see any on-screen
displays, follow the steps on pages
nine - 10 to select a language and
set up channels.
To skip step 2, press the
STATUS/EXIT button. All on-screen
displays will be in English. To skip
step 4, press the STATUS/EXIT but
ton. Channels will not be set up, and
CHANNELS NOT SET will appear
on-screen briefly.
You cannot set up channels if you
are using a Cable Box.
Line Input mode will always be
stored in the TV/VCR’s memory as
channel 00. When you select chan
nel 00,A/V IN will appear on-screen
briefly. Press the CH(annel).
Up/Down buttons or Number but
tons to select another channel.
Follow the steps below to change the language of the on-screen
displays and menus.
Language Selection 9
Press the COMBI button, then press the MENU button.
1
> PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
REMINDER
BRIGHTNESS
PRESS ► 1
J
y
2
Press the PLAY/A button or the STOP/T button to select
PRIM. SETUP. Then, press the F.FWD/^ button.
PRIMARY SETUP
> SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
VOLUME BAR [ON]
SET CLOCK
REMOTE LOCATOR
SELECT AT CHOOSE ►
TO END PRESS EXIT
3
Press the PLAY/A button or the STOP/T button to
choose SELECT LANGUAGE. Then, press the F.FWD/^
button.
SELECT LANGUAGE
> ENGLISH ON
ESPAÑOL
SELECT AT
TO END PRESS EXIT
2-4
4
Press the PLAY/A button or the STOP/T button to select
ENGLISH or ESPAÑOL (Spanish).
Press the STATUS/EXIT button.
Helpful Hint
If you accidentally select Spanish
and need English:
1) Press the COMBI button, then
press the MENU button.
2) Press the PLAY/.^ button or the
STOP/'^ button to select PREPARA
CION, then press the FFWD/^
button.
3) Press the PLAY/.^ button or the
STOP/t^ button to select SELEC
CION IDIOMA, then press the
F.FWD/ ► button.
4) Press the PLAY/^ button or the
STOP/'^ button to select ENGLISH.
5) Press the STATUS/EXIT button.
10 Automatic Channel Setup
Although the TV/VCR may automatically memorize the channels
you receive when you turn it on for the first time, you may set up
channels again by following the steps below.
I
Press the COMBI button, then press the MENU button.
'to adjust press
> INPUT
EXIT
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
2
Press the PLAY/A button or the STOP/T button to select
INPUT. Press the REW(ind)/-^ button or the F.FWD/^
button until ANTENNA or CABLE (whichever you have)
appears beside INPUT.
3
Press the STOP/T button repeatedly to select PRIM.
SETUP, then press the F.FWD/^ button.
PRIMARY SETUP
> SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
VOLUME BAR [ON]
SET CLOCK
REMOTE LOCATOR
SELECT AT CHOOSE ►
TO END PRESS EXIT
1 CABLE i
J
Wait for the TV/VCR to set up
channels.
5
!2i'
4
4
Press the PLAY/A button or the STOP/V button to select
AUTO PROGRAMMING, then press the F.FWD/^ but
ton. AUTO PROGRAMMING MEMORIZED CH ...will appear on
screen.The TV/VCR will memorize all available channels.
5
Wait for a few minutes. When setup is complete, CHANNELS
ARE SET will appear on-screen.Then the programming of the low
est channel number placed in the TV/VCR’s memory will appear
on-screen. Now, when you press the CH(annel). Up/Down but
tons, you will scan only through channels you receive.
Helpful Hints
Line Input mode will always be
stored in the TVIVCR’s memory as
channel OO.You cannot delete it.
You cannot program channels when
the TV/VCR is on channel 00 (AIV
INPUT will appear beside INPUT at
step 2). Select ANTENNA or CABLE
at step 2.
Automatic Channel Setup (cont'd) 11
Adding/Deleting Channels
I
Press the COMBI button» then press the MENU button.
'TOADJUST PRESS ◄/►
CHI 23
> CHANNEL
INPUT
EXIT
PRIM.SETUP
VCR PROGRAM
VCR SETUP
! SAVED 1
y
2
Press the PLAY/A button or the STOP/V button to select
CHANNEL.
'TOADJUST PRESS ◄/►
CHI 23
> CHANNEL
INPUT
EXIT
PRIM. SETUP
VCR PROGRAM
VCR SETUP
1 SAVED 1
y
3
Press the Number buttons or the CH(annel). Up/Down
buttons to enter the channel number you want to add or
delete.
' TO ADJUST PRESS ■
CH23
> CHANNEL
INPUT
EXIT
PRIM.SETUP
VCR PROGRAM
VCR SETUP
1 SAVED 1
y
4
Press the F.FWD/^ button or the REW(ind)/-^ button to
select SAVED (to add that channel) or DELETED (to
delete that channel).
Press the STATUS/EXIT button.
Programming of the channel you added or deleted will appear.
CD CO CD
CD CD CD
CD CD CD"
PHILIPS
Helpful Hint
To review the channels memorized
by the TV/VCR, follow these steps.
1) Press the COMBI button, then
press the MENU button.
2) Press the PLAY/A button or the
STOP/T button to select
PRIM.SETUP. Press the EFWD/>button.
3) Press the PLAY/A button or the
STOP/Y button to select CH MEM
ORY REVIEW. Press the EFWD/^
button. A list of programmed chan
nels will appear on-screen.
4) If all the programmed channels
don’t fit on-screen, press the
F.FWD/^ button. If you do not
press the F.FWD/^ button within
10 seconds, the remaining channels
will appear on-screen. (If there are
no remaining channels, the previous
menu will appear.) Or press the
REW(ind) /◄ button to see the
previous screen of channels.
5) Press the STATUS/EXIT button
once or twice.
12 Setting the Clock
There are three ways to set the clock: Manually, with Automatic
PBS Channel Selection, or with Manual PBS Channel Selection.
With manual clock setting, you tell theTV/VCR the current time.
With Automatic or Manual PBS Channel Selection, the TV/VCR
gets the time from your local PBS station. If you use either Manual
PBS Channel Selection or Automatic PBS Channel Selection, follow
the steps on page 19 to have theTV/VCR maintain the clock
according to your Time Zone.
To set the clock manually, follow the steps on pages 12 -13.To set
the clock using Automatic PBS Channel Selection, follow the steps
on pages 14 - IS.To set the clock using Manual PBS Channel
Selection, follow the steps on pages 16 - 17.
Before you begin, make sure:
• TheTV/VCR is hooked up and turned on.
• Channels are set up.
• You make each entry within 60 seconds of the previous entry.
Manual Clock Setting
I
Press the COMBI button, then press the MENU button.
2-3
> PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
REMINDER
BRIGHTNESS
V
1 PRESS ► 1
J
2
Press the PLAY/A button or the STOP/T button to select
PRIM. SETUP. Then, press the F.FWD/^ button.
PRIMARY SETUP
> SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
VOLUME BAR [ON]
SET CLOCK
REMOTE LOCATOR
SELECT AT CHOOSE ►
TO END PRESS EXIT
3
Press the PLAY/A button or the STOP/T button to select
SET CLOCK.Then, press the F.FWD/^ button.
SET CLOCK
> AUTO CLOCK [ON]
SET MANUAL CLOCK
DAYLIGHT SVG.TIME [ON]
SETTIME ZONE
[AUTO]
TO CONTINUE PRESS MENU
SELECT AT CHOOSE ►
TO END PRESS EXIT
Helpftri Hints
Entries that do not match the
TV/VCR’s calendar will cause a
question mark (?) to appear on the
screen.
To make corrections while you are
setting the clock, press the CLEAR
button until the space for the num
ber you want to correct is flashing.
Then enter the correct number.
Setting the Clock (contad) 13
4
If ON appears beside AUTO CLOCK, press the F.FWD/^
button so that OFF appears to the right of AUTO
CLOCK, then press the MENU button. If OFF appears
beside AUTO CLOCK, press the MENU button.
'SET MANUAL CLOCK
TIME --3--
DATE
TO END PRESS EXIT
5
Press two Number buttons for the hour(s) and two
Number buttons for the minute(s).Then press I for AM
or 2 for PM, For example, for 9:30 PM, press 09,30,2.
SET MANUAL CLOCK
TIME 09 :30 PM
MONTH
5-6
rn CD CD
CD CD CD
rn CD CD
m m CD
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
6
Press two Number buttons for the month, two Number
buttons for the day, and two Number buttons for the year.
For example, for July 1, 1998, press 07,01,98.The day of the week
will appear automatically.
'SET MANUAL CLOCK
TIME 09 :30 PM
DATE 07/01/98
WEDNESDAY
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
7
Press the STATUS/EXIT button.
PHILIPS
14 Setting the Clock (contad)
Automatic PBS Channel Selection
I
Press the COMBI button, then press the MENU button.
> PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
REMINDER
BRIGHTNESS
V j
Press the PLAY/A button or the STOP/T button to select
PRIM. SETUP.Then, press the F.FWD/^ button.
PRIMARY SETUP
> SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
VOLUME BAR [ON]
SET CLOCK
REMOTE LOCATOR
SELECT AT CHOOSE ►
TO END PRESS EXIT
1 PRESS ► 1
2-3
4
3
Press the PLAY/A button or the STOP/T button to select
SET CLOCK.Then, press the F.FWD/^ button.
' SET CLOCK
> AUTO CLOCK [ON]
SET MANUAL CLOCK
DAYLIGHT SVG.TIME [ON]
SETTIME ZONE
[AUTO]
TO CONTINUE PRESS MENU
SELECT AT CHOOSE ►
TO END PRESS EXIT
4
If ON appears beside AUTO CLOCK, press the MENU
button. If OFF appears beside AUTO CLOCK, press the
F.FWD/^ button so that ON appears to the right of
AUTO CLOCK, then press the MENU button.
AUTO CLOCK
AUTO CLOCK USES
PBS CHANNEL DATA
> SET PBS CH. AUTO
SET PBS CH. MANUAL
SELECT
AT
TO END PRESS EXIT
CHOOSE ►
Setting the Clock (confd) 15
5
Press the PLAY/A button or the STOP/V button to select
SET PBS CH. AUTO.Then, press the F.FWD/^ button.
'SET AUTO CLOCK
TIME —
DATE
NOW SEARCHING
TO END PRESS EXIT
6
NOW SEARCHING flashes on the TV/VCR screen.
However, you may see the message: “PLEASE TURN OFF TO SET
AUTO CLOCK PLEASE WAIT SEVERAL MINUTES.” If this mes
sage appears, turn off the TV/VCR for a few minutes. When you
turn on the TV/VCR, the time will be set If the time is not set
repeat steps I - 5. Or, follow the steps on pages 12 - 13 to set the
clock manually or pages 16 - 17 to set the clock with Manual PBS
Channel Selection.
7
When theTVAfCR finds the PBS channel» the time will
appear on-screen. Press the STATUS/EXIT button.
'SET AUTO CLOCK
TIME
06:30 PM
DATE
07/01 /98
WEDNESDAY
Wait for the TV/VCR to find
the time.
6
5
TO END PRESS EXIT
e If CANNOT FIND CLOCK DATA flashes on the
TV/VCR screen» you will be prompted to turn off the
TV/VCR.Turn off the TV/VCR, Leave it off for several min
utes. When you turn on the TV/VCR again, the clock will be set.
'SET AUTO CLOCK
TIME
DATE --/ — /--
CANNOT FIND CLOCK DATA
TO END PRESS EXIT
Helpful Hints
To display the time, press the STA
TUS/EXIT button. A status display,
which includes the time, will appear
on the TV/VCR screen. Details are
on page 29.
You must turn off the TV/VCR for
several minutes during automatic
clock setting. If the clock is not set
when you turn on the TV/VCR,
repeat the steps for Automatic PBS
Channel Selection. If the clock still is
not set, set the clock manually.
You cannot use the AUTO CLOCK
feature if you don’t receive a PBS
channel that carries a time signal in
your area. Set the clock manually.
16 Setting the Clock (confd)
Manual PBS Channel Selection
I
Press the COMBI button, then press the MENU button.
2-3
> PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
REMINDER
BRIGHTNESS
1 PRESS ► 1
1
-----------
1
)
y
Press the PLAY/A button or the STOP/V button to select
PRIM. SETUP. Then, press the F.FWD/^ button.
PRIMARY SETUP
> SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
VOLUME BAR [ON]
SET CLOCK
REMOTE LOCATOR
SELECT AT CHOOSE ►
TO END PRESS EXIT
3
Press the PLAY/A button or the STOP/T button to select
SET CLOCK.Then, press the F.FWD/^ button.
' SET CLOCK
> AUTO CLOCK [ON]
SET MANUAL CLOCK
DAYUGHT SVG.TIME [ON]
SETTIME ZONE
[AUTO]
TO CONTINUE PRESS MENU
SELECT AT CHOOSE ►
TO END PRESS EXIT
4
4
If ON appears beside AUTO CLOCK, press the MENU
button. If OFF appears beside AUTO CLOCK, press the
F.FWD/^ button so that ON appears to the right of
AUTO CLOCK, then press the MENU button.
' AUTO CLOCK
AUTO CLOCK USES
PBS CHANNEL DATA
> SET PBS CH. AUTO
SET PBS CH. MANUAL
SELECT
AT
TO END PRESS EXIT
CHOOSE ►
Setting the Clock (cont*d) 17
5
Press the PLAY/A button or the STOP/T button to select
SET PBS CH. MANUALThen, press the RFWD/^ but
ton.
'^AUTO CLOCK (PBS) CH - -
TIME
DATE
SELECT CHANNEL NUMBER
TO END PRESS EXIT
6
Use the Number buttons to select your PBS station. If you
make a mistake, press the CLEAR button, then enter the correct
number.
'AUTO CLOCK (PBS) CH 12
TIME
date
NOW SEARCHING
TO END PRESS EXIT
Wait for the TV/VCR to
find the time.
7
cm:
CD CD CD
6
CD CD CD
CD CD CD
5
8
7
NOW SEARCHING flashes on theTV/VCR screen.
8
When theTV/VCR finds the clock data, the time will
appear on-screen. Press the STATUS/EXIT button.
^UTO CLOCK (PBS) CH 12
TIME 06 :30 PM
DATE 07/01 /98
WEDNESDAY
TO END PRESS EXIT
If CANNOT FIND CLOCK DATA flashes on the
TV/VCR screen and you know another PBS channel,
press the PLAY/A button or the STOP/T button to
choose SELECT NEW PBS CH. Press the F.FWD/^
button, then repeat step 6.
If CANNOT FIND CLOCK DATA flashes on the
TV/VCR screen and you do not know another channel,
press the PLAY/A button or the STOP/T button to
select SET PBS CH. AUTO. Then, press the F.FWD/^
button. The TV/VCR will search for the PBS channel automati
cally.
• If the PBS channel is found, the time will appear on-screen.
Press the STATUS/EXIT button.
• If the PBS channel is not found, you will be prompted to turn
off the TV/VCR. Leave it off for several minutes. When you turn
on theTV/VCR again, the time will be set.
y
________
¿s ¿5
J
PHILIPS QQBSESQ
Helpful Hints
If you have an Antenna hookup, you
may select channels 2 - 69 at step
6. If you have a cable connection,
you may select channels I - 125 at
step 6. Details about available
memorized channels are on page
II.
To display the time, press the STA
TUS/EXIT button. A status display,
which includes the time, will appear
on the TV/VCR screen. Details are
on page 29.
18 Daylight-Saving Time
When the Daylight-Saving Time feature is ON,theTV/VCR clock
will automatically move forward one hour on the first Sunday in
April and move back one hour on the last Sunday in October.
To turn Daylight-Saving Time ON or OFF, follow the steps below.
I
Press the COMBI button, then press the MENU button.
2-4
> PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
REMINDER
BRIGHTNESS
V
1 PRESS ► 1
J
2
Press the PLAY/A button or the STOP/T button to select
PRIM. SETUP.Then, press the F.FWD/^ button.
PRIMARY SETUP
> SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
VOLUME BAR [ON]
SET CLOCK
REMOTE LOCATOR
SELECT Ar CHOOSE ►
TO END PRESS EXIT
3
Press the PLAY/A button or the STOP/T button to select
SET CLOCK.Then, press the F.FWD/^ button.
SET CLOCK
> AUTO CLOCK [ON]
SET MANUAL CLOCK
DAYLIGHT SVG.TIME [ON]
SETTIME ZONE
[AUTO]
TO CONTINUE PRESS MENU
SELECT AT CHOOSE ►
TO END PRESS EXIT
5
4
Press the PLAY/A button or the STOP/T button to select
DAYLIGHT SVG.TIME.Then, press the F.FWD/P- button
so that ON or OFF appears beside DAYLIGHT SVG.TIME
(Daylight Saving Time).
5
Press the STATUS/EXIT button.
Loading...