Philips CCZ130AT User Manual

Owner’s Manual

Important!

Return your Warranty Registration

Card within 10 days. See why inside.

Color TV with built-in VCR

CCZ130AT

Use photograph

(same as carton)

CCZ130comb 4/5/99 7:31 PM Page 1

Once your PHILIPS MAGNAVOX purchase is registered, you’re eligible to receive all the privileges
of owning a PHILIPS MAGNAVOX product. So complete and return the Warranty Registration
Card enclosed with your purchase at once. And take advantage of these important benefits.

Return your Warranty Registration card today to

ensure you receive all the

benefits

you’re entitled to.

For Customer Use

Enter below the Serial No.
which is located on the rear
of the cabinet. Retain this
information for future refer­ence.

Model No. ______________
Serial No. ______________

Congratulations on your purchase, and
welcome to the “family!”

Dear PHILIPS MAGNAVOX product owner:

Thank you for your confidence in PHILIPS MAGNAVOX. You’ve
selected one of the best-built, best-backed products available
today. And we’ll do everything in our power to keep you happy
with your purchase for many years to come.
As a member of the PHILIPS MAGNAVOX “family,” you’re enti­tled to protection by one of the most comprehensive warranties
and outstanding service networks in the industry.
What’s more, your purchase guarantees you’ll receive all the infor­mation and special offers for which you qualify, plus easy access to
accessories from our convenient home shopping network.
And most importantly you can count on our uncompromising
commitment to your total satisfaction.
All of this is our way of saying welcome-and thanks for investing in
a PHILIPS MAGNAVOX product.

Sincerely,

Robert Minkhorst
President and Chief Executive Officer

P.S. Remember, to get the most from your PHILIPS

MAGNAVOX product, you must return your
Warranty Registration Card within 10 days. So
please mail it to us right now!

Know these

safetysymbols

This “bolt of lightning” indicates

uninsulated material within your
unit may cause an electrical shock. For
the safety of everyone in your house­hold, please do not remove product
covering.

The “exclamation point” calls

attention to features for which

you should read the enclosed lit­erature closely to prevent operating
and maintenance problems.

WARNING: TO PREVENT FIRE OR
SHOCK HAZARD, DO NOT
EXPOSE THIS EQUIPMENT TO RAIN
OR MOISTURE.

CAUTION: To prevent electric
shock, match wide blade of plug to
wide slot, and fully insert.

ATTENTION: Pour éviter les chocs
électriques, introduire la lame la plus
large de la fiche dans la borne corre­spondante de la prise et pousser
jusqu’au fond.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

R

E

G

I

S

T

R

A

T

I

O

N

N

E

E

D

E

D

W

I

T

H

I

N

1

0

D

A

Y

S

Hurry!

t

s

Warranty
Verification

Registering your product within
10 days confirms your right to max­imum protection under the
terms and conditions of your
PHILIPS MAGNAVOX warranty.

Owner
Confirmation

Your completed Warranty
Registration Card serves as
verification of ownership in the
event of product theft or loss.

Model
Registration

Returning your Warranty
Registration Card right away guar­antees you’ll receive all the informa­tion and special offers which you
qualify for as the owner of your
model.

Visit our World Wide Web Site at http://www.philipsmagnavox.com

CCZ130comb 4/5/99 7:31 PM Page 2

Introduction 3

• Before doing anything else, record
the TV/VCR’s model and serial num­bers in the spaces provided on page
two. These numbers will help us
assist you if you ever call for help.

Helpful Hint

Features

• A-B Repeat Play

• Automatic Channel Setup

• Automatic Operation Features

• Automatic Tracking Adjustment

• Closed Caption

• Daylight-Saving Time

• High Quality (HQ) System

• On-Screen displays in English or Spanish

• On-Screen Menu Programming, accessible with remote control
or front panel buttons

• One-Touch Recording

• Real-Time Counter

• Remote Control

• Repeat Play

• Sleep Timer

• SmartClock

TM

• Special Effects Playback: Forward and Reverse Searching; Still

• Timer Recording

Safety Precautions

Warning: To prevent fire or shock hazard, do not expose this
equipment to rain or moisture.
FCC Warning: Any unauthorized changes or modifications to this
equipment void the user’s authority to operate it.
This TV/VCR, equipped with a High Quality (HQ) system, is com­patible with existing Video Home System (VHS) equipment.

Philips Consumer Electronics Company recommends that
you use only video cassette tapes that have been tested and
inspected for use in two, four, six, and eight hour VCRs, and
which are labeled with the mark. The use of tapes that
have not been inspected for use in two, four, six, and eight hour
VCRs may result in poor picture quality and excessive deposits on
the video heads, which may not be covered by the warranty if
damage occurs.

Note to the Cable TV System Installer: This reminder is
provided to call the Cable TV system installer’s attention to
Article 820-40 of the National Electrical Code, which provides
guidelines for proper grounding – in particular, specifying that the
cable ground shall be connected to the grounding system of the
building, as close to the point of cable entry as possible.

SmartClockTMis a trademark of Philips Consumer Electronics
Company.
Copyright 1998 Philips Consumer Electronics Company. All rights
reserved.

Welcome to your TV/VCR owner’s manual.

This manual has six sections: Setting Up Your TV/VCR; Description of Controls; Basic Operations;
Recording Options; Playing Options; and Information You May Need. The instructions explain all of the
TV/VCR’s features, which are listed below.

CCZ130comb 4/5/99 7:31 PM Page 3

m

s

a

i

d

l

e

a

u

o

n

f

a

r

m

s

'

r

e

n

e

c

y

c

l

e

d

w

p

O

a

p

s

i

e

h

r

.

T

4 Table of Contents

Setting Up Your TV/VCR

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Before Using the TV/VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Hooking Up the TV/VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 - 7

Turning On the TV/VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Language Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Automatic Channel Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 - 11

Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 - 17

Daylight-Saving Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Time Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Description of Controls

Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Remote Control Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 - 23

Adjusting the Picture Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 - 25

On-Screen Status Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Reminder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Basic Operations

Playing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Recording Options

One-Touch Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Rerecording (Tape Duplication) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 - 35

Defeat Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

Playing Options

Setting the Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Closed Caption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38 - 39

Volume Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

A - B Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42 - 43

Real-Time Counter Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Automatic Operation Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Playback Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

Information You May Need

Specifications / Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Helpful Hints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 - 49

Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

CCZ130comb 4/5/99 7:31 PM Page 4

• The remote control and its batteries
are supplied.

• Do not mix alkaline and man­ganese batteries.

• Do not mix old and new batteries.

Before Using the TV/VCR 5

Putting Batteries in the Remote Control

1

Remove the battery compartment lid on the bottom of
the remote control by sliding it in the direction of the
arrow.

2

Place two AA batteries inside the battery compartment
with their +and –ends aligned as indicated.

3

Replace the battery compartment lid.

Using the Remote Control

● Point the remote control at the TV/VCR’s remote sensor.

● Do not put objects between the remote control and the

TV/VCR.

VCR Maintenance

● In this TV/VCR, use only tapes with the mark.

● Make sure any light adhesive stick-on notes are removed from

the video cassette tape before putting the tape in the TV/VCR.
Removable labels like these can jam the TV/VCR.

● Periodic maintenance is required to maintain your TV/VCR’s

excellent performance. This TV/VCR has an automatic head
cleaning system. However, the video heads will eventually
require cleaning or replacement. Cleaning or replacement of the
video heads should be performed by an authorized service cen­ter.

Video cassette tapes have record tabs to ensure that recordings
are not accidentally erased.

1

To prevent accidental erasure, break off the tab with a
screwdriver.

2

To record again, cover the hole with cellophane tape.

Erasure Prevention

Helpful Hints

1
2

1
2

3

Removing the Shipping Card

● A shipping card may be inserted in the cassette compartment of

the TV/VCR. Before you insert a cassette tape, remove the ship­ping card. To remove the card, open the cassette compartment
door, then grasp the adhesive tape and remove the card.

CCZ130comb 4/5/99 7:31 PM Page 5

6 Hooking Up The TV/VCR

ANT.

ANT.

Hooking Up Your TV/VCR
With a Cable Signal or
Outdoor Antenna

ANT.

IN

OUT

ANT.

Connect an RF coaxial cable (75­ohm, not supplied) to the OUT Jack
on the Cable Box and to the
ANT(enna) Jack on the TV/VCR.

Connect a Cable signal
or an antenna to the
ANT(enna) Jack.

Hooking Up Your TV/VCR
With a Cable Box

To view any channel, set the
TV/VCR to the Cable Box output
channel (channel 03 or 04). Then,
select channels at the Cable Box.

1

Hook up your TV/VCR using one of the connections shown.

A.

B.

ANT.

ANT.

Rod Antenna

(not supplied)

Hooking Up Your TV/VCR
With an Indoor Antenna

To install a rod antenna (not sup­plied), push the stem of the antenna
into the antenna hole on the top of
the TV/VCR. Connect the antenna
wire to the ANT(enna) Jack on the
back of the TV/VCR as shown.
Extend the antenna and adjust its
length, direction, and angle for the
clearest picture.

C.

Connect the Cable signal to
the IN Jack on the Cable Box.

CCZ130comb 4/5/99 7:31 PM Page 6

Hooking Up The TV/VCR (cont’d) 7

EARPHONE

AUDIO

VIDEO

STOP/EJECT REW PLAY F.FWD

REC/OTR CHANNEL VOLUME POWER

OUT

IN

VIDEO

IN

OUT

3CH
4CH

AUDIO

ANT.

OUT

IN

VIDEO

IN

OUT

3CH
4CH

AUDIO

ANT.

VIDEOAUDIO

• Before connecting an antenna or cable signal to the ANT(enna) Jack, make sure the pin is not bent. If the pin is
bent, straighten it as illustrated, then connect the antenna or cable signal to the ANT(enna) Jack.

• A rod antenna (not supplied) is available from Philips Service Solutions Group. The part number is 4835 303

37006. To order, call 1-800-851-8885.

• Audio and video cables are not supplied.

Helpful Hints

Crooked Pin

Straight Pin

Bent pin

Plug

Cable

Hooking Up Your
TV/VCR to Another
Video Source
(VCR or Camcorder)

You may need this connection
if you want to copy tapes.

Details are on page 31.

AUDIO/VIDEO Jacks
on front of TV/VCR

AUDIO/VIDEO OUT
Jacks on VCR

Use an Audio cable to connect the AUDIO
OUT Jack on the VCR to the AUDIO Jack
on the front of the TV/VCR.

Use a Video cable to connect the VIDEO OUT Jack on
the VCR to the VIDEO Jack on the front of the TV/VCR.

2

Plug in the TV/VCR.

3

Before you turn on the TV/VCR, go to page eight.

D.

CCZ130comb 4/5/99 7:32 PM Page 7

8 Turning On the TV/VCR

Before you turn on the TV/VCR, make sure there are batteries in
the remote control and the TV/VCR is hooked up correctly.
The instructions on this page work only when you turn on the
TV/VCR for the first time.

1

Press the POWER button. The TV/VCR will come on and the

screen shown below will appear.

2

Press the PLAY/K button or the STOP/L button to select

English or Spanish on-screen displays.

3

Press the MENU button. The screen shown below will appear.

4

Press the FF/SEARCH B button to begin automatic chan­nel setup. The TV/VCR will memorize all available channels.

When channels are set, CHANNELS ARE SET will appear on­screen briefly. Then the TV/VCR will go to the lowest channel
programmed.
(If you try to set up channels when there is no antenna or cable
connected to the TV/VCR, programming will appear to take place,
but eventually a NO TV SIGNALS ... message will appear on­screen. Connect an antenna or cable to the TV/VCR, then try
again. You may need to follow the steps on page 10 instead.)

CONNECT ANTENNA OR CABLE
TO TVCR

THEN PRESS B

TO END PRESS EXIT

SELECT LANGUAGE

> ENGLISH ON

ESPAÑOL

SELECT KL OR
PRESS MENU TO CONTINUE

5

Use the CHANNEL o/p buttons or the Number buttons
on the remote control to select a TV/VCR channel. Use
the VOLUME o/p buttons to adjust the sound.

• If you do not see any on-screen dis­plays when you turn on the TV/VCR,
check your hookups, then try again.
If you still do not see any on-screen
displays, follow the steps on pages
nine - 10 to select a language and
set up channels.

• To skip step 2, press the MENU
button. All on-screen displays will be
inEnglish. To skip step 4, press the
STATUS/EXITbutton. Channels will
not be set up, and CHANNELS
NOT SET will appear on-screen
briefly.

• You cannot set up channels if you
are using a Cable Box.

• Line Input mode will always be
stored in the TV/VCR’s memory as
channel 00. When you select chan­nel 00, A/V IN will appear on­screen briefly. Press the CHANNEL
o/p buttons or Number buttons to
select another channel.

Helpful Hints

1

2

3

4

5

CCZ130comb 4/5/99 7:32 PM Page 8

POWER CLEARSTATUS/EXIT

MENU

1 2 3

4 5 6

7 8 9

0

MUTE

VOLUME

REW/SEARCH PLAY/ FF/SEARCH

REC/OTR PAUSE/STILL

STOP/

+100

MEMORY

CHANNEL

ALT.CH

SLEEP

SPEED

Language Selection 9

Follow the steps below to change the language of the on-screen
displays.

3

Press the PLAY/▲ button or the STOP/▼ button to
choose SELECT LANGUAGE. Then, press the
FF/SEARCH B button.

4

Press the PLAY/▲ button or the STOP/▼ button to select
ENGLISH or ESPAÑOL (Spanish).

5

Press the STATUS/EXIT button.

SELECT LANGUAGE

> ENGLISH ON

ESPAÑOL

SELECT KL
TO END PRESS EXIT

1

Press the MENU button.

2

Press the PLAY/▲ button or the STOP/▼ button to select
PRIM. SETUP. Then, press the FF/SEARCH B button.

PRIMARY SETUP

> SELECT LANGUAGE

AUTO PROGRAMMING
CH MEMORY REVIEW
VOLUME BAR [ON]
SET CLOCK

SELECT KL CHOOSE B
TO END PRESS EXIT

> PRIM. SETUP

VCR PROGRAM
VCR SETUP
CAPTION
REMINDER
BRIGHTNESS

PRESS B

2-4

• If you accidentally select Spanish
on-screen displays and need English
on-screen displays:

1) Press the MENU button.

2) Press the PLAY/o button or the
STOP/p button to select PREPARA­CION, then press the
FF/SEARCH B button.

3) Press the PLAY/o button or the
STOP/p button to select SELEC­CION IDIOMA, then press the
FF/SEARCH B button.

4) Press the PLAY/o button or the
STOP/p button to select ENGLISH.

5) Press the STATUS/EXIT button.

Helpful Hint

1

5

CCZ130comb 4/5/99 7:32 PM Page 9

POWER CLEARSTATUS/EXIT

MENU

1 2 3

4 5 6

7 8 9

0

+100

MUTE

VOLUME

REW/SEARCH PLAY/ FF/SEARCH

STOP/

REC/OTR PAUSE/STILL

MEMORY

CHANNEL

ALT.CH

SLEEP

SPEED

10 Automatic Channel Setup

Although the TV/VCR may automatically memorize the channels
you receive when you turn it on for the first time, you may set up
channels again by following the steps below.

1

Press the MENU button.

TO ADJUST PRESS { / B

> INPUT

EXIT
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION

CABLE

2

Press the PLAY/▲ button or the STOP/▼ button to select
INPUT. Press the REW(ind)/SEARCH { button or the
FF/SEARCH B button until ANTENNA or CABLE
(whichever you have) appears beside INPUT.

3

Press the STOP/▼ button repeatedly to select PRIM.
SETUP, then press the FF/SEARCH B button.

PRIMARY SETUP

> SELECT LANGUAGE

AUTO PROGRAMMING
CH MEMORY REVIEW
VOLUME BAR [ON]
SET CLOCK

SELECT KL CHOOSE B
TO END PRESS EXIT

4

Press the PLAY/▲ button or the STOP/▼ button to select
AUTO PROGRAMMING, then press the FF/SEARCH B
button. AUTO PROGRAMMING MEMORIZED CH ... will

appear on-screen. The TV/VCR will memorize all available chan­nels.

• Line Input mode will always be
stored in the TV/VCR’s memory as
channel 00. You cannot delete it.

• You cannot program channels when
the TV/VCR is on channel 00 (A/V
INPUT will appear beside INPUT at
step 2). Select ANTENNA or CABLE
at step 2.

Helpful Hints

5

Wait for a few minutes. When setup is complete, CHANNELS

ARE SET will appear on-screen. Then the programming of the
lowest channel number placed in the TV/VCR’s memory will
appear on-screen. Now, when you press the CHANNEL o/p
buttons, you will scan only through channels you receive.

5

Wait for the TV/VCR to set up
channels.

1

3

2&4

TO ADJUST PRESS { / B

> INPUT

EXIT
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION

CABLE

CCZ130comb 4/5/99 7:32 PM Page 10

REW/SEARCH PLAY/ FF/SEARCH

POWER CLEARSTATUS/EXIT

MENU

1 2 3

4 5 6

7 8 9

0

MUTE

VOLUME

REC/OTR PAUSE/STILL

STOP/

+100

MEMORY

CHANNEL

ALT.CH

SLEEP

SPEED

Automatic Channel Setup (cont’d) 11

4

Press the FF/SEARCH B button or the
REW(ind)/SEARCH { button to select SAVED (to add
that channel) or DELETED (to delete that channel).

5

Press the STATUS/EXIT button.

Programming of the channel you added or deleted will appear.

3

Press the Number buttons or the CHANNEL ▲/▼ but­tons to enter the channel number you want to add or
delete.

• To review the channels memorized
by the TV/VCR, follow these steps.

1) Press the MENU button.

2) Press the PLAY/▲ button or the
STOP/▼ button to select
PRIM.SETUP. Press the
FF/SEARCH B button.

3) Press the PLAY/▲ button or the
STOP/▼ button to select CH MEM­ORY REVIEW. Press the
FF/SEARCH B button. A list of pro­grammed channels will appear on­screen.

4) If all the programmed channels
don’t fit on-screen, press the
FF/SEARCH B button. If you do not
press the FF/SEARCH B button
within 10 seconds, the remaining
channels will appear on-screen. (If
there are no remaining channels,
the previous menu will appear.) Or
press the REW(ind)/SEARCH {
button to see the previous screen of
channels.

5) Press the STATUS/EXIT button
once or twice.

Helpful Hint

1

Press the MENU button.

2

Press the PLAY/▲ button or the STOP/▼ button to select
CHANNEL, then press the FF/SEARCH B button.

Adding/Deleting Channels

TO ADJUST PRESS { / B

CH123

> CHANNEL

INPUT
EXIT
PRIM. SETUP
VCR PROGRAM
VCR SETUP

SAVED

TO ADJUST PRESS { / B

CH23

> CHANNEL

INPUT
EXIT
PRIM. SETUP
VCR PROGRAM
VCR SETUP

SAVED

TO ADJUST PRESS { / B

CH123

> CHANNEL

INPUT
EXIT
PRIM. SETUP
VCR PROGRAM
VCR SETUP

SAVED

1

5

2

4

3

CCZ130comb 4/5/99 7:32 PM Page 11

POWER CLEARSTATUS/EXIT

MENU

1 2 3

4 5 6

7 8 9

0

MUTE

VOLUME

REW/SEARCH PLAY/ FF/SEARCH

REC/OTR PAUSE/STILL

STOP/

+100

MEMORY

CHANNEL

ALT.CH

SLEEP

SPEED

12 Setting the Clock

• Entries that do not match the
TV/VCR’s calendar will cause a
question mark (?) to appear on the
screen.

• To make corrections while you are
setting the clock, press the CLEAR
button until the space for the num­ber you want to correct is flashing.
Then enter the correct number.

Helpful Hints

There are three ways to set the clock: Manually, with Automatic
PBS Channel Selection, or with Manual PBS Channel Selection.
With manual clock setting, you tell the TV/VCR the current time.
With Automatic or Manual PBS Channel Selection, the TV/VCR
gets the time from your local PBS station. If you use either Manual
PBS Channel Selection or Automatic PBS Channel Selection, fol­low the steps on page 19 to have the TV/VCR maintain the clock
according to your Time Zone.
To set the clock manually, follow the steps on pages 12 -13. To
set the clock using Automatic PBS Channel Selection, follow the
steps on pages 14 - 15. To set the clock using Manual PBS
Channel Selection, follow the steps on pages 16 - 17.
Before you begin, make sure:

● The TV/VCR is hooked up and turned on.

● Channels are set up.

● You make each entry within 60 seconds of the previous entry.

Manual Clock Setting

1

Press the MENU button.

2

Press the PLAY/▲ button or the STOP/▼ button to select
PRIM. SETUP. Then, press the FF/SEARCH B button.

PRIMARY SETUP

> SELECT LANGUAGE

AUTO PROGRAMMING
CH MEMORY REVIEW
VOLUME BAR [ON]
SET CLOCK

SELECT KL CHOOSE B
TO END PRESS EXIT

> PRIM. SETUP

VCR PROGRAM
VCR SETUP
CAPTION
REMINDER
BRIGHTNESS

PRESS B

SET CLOCK

> AUTO CLOCK [ON]

SET MANUAL CLOCK
DAYLIGHT SVG.TIME [ON]
SET TIME ZONE

[AUTO]

TO CONTINUE PRESS MENU
SELECT KL CHOOSE B

TO END PRESS EXIT

3

Press the PLAY/▲ button or the STOP/▼ button to select
SET CLOCK. Then, press the FF/SEARCH B button.

2-3

1

CCZ130comb 4/5/99 7:32 PM Page 12

POWER CLEARSTATUS/EXIT

MENU

1 2 3

4 5 6

7 8 9

0

MUTE

VOLUME

REW/SEARCH PLAY/ FF/SEARCH

REC/OTR PAUSE/STILL

STOP/

+100

MEMORY

CHANNEL

ALT.CH

SLEEP

SPEED

Setting the Clock (cont’d) 13

5

Press two Number buttons for the hour(s) and two
Number buttons for the minute(s). Then press 1 for AM
or 2 for PM. For example, for 9:30 PM, press 09, 30, 2.

SET MANUAL CLOCK

TIME 09 : 30 PM

MONTH – – / – – / – –

TO CORRECT PRESS CLEAR
TO END PRESS EXIT

6

Press two Number buttons for the month, two Number
buttons for the day, and two Number buttons for the
year. For example, for July 1, 1998, press 07, 01, 98. The day of

the week will appear automatically.

7

Press the STATUS/EXIT button.

SET MANUAL CLOCK

TIME 09 : 30 PM
DATE 07 / 01 / 98

WEDNESDAY

TO CORRECT PRESS CLEAR
TO END PRESS EXIT

4

If ON appears beside AUTO CLOCK, press the
FF/SEARCH B button so that OFF appears to the right of
AUTO CLOCK, then press the MENU button. If OFF
appears beside AUTO CLOCK, press the MENU button.

SET MANUAL CLOCK

TIME – – : – –

DATE – – / – – / – –

TO END PRESS EXIT

5-6

7

4

CCZ130comb 4/5/99 7:32 PM Page 13

POWER CLEARSTATUS/EXIT

MENU

1 2 3

4 5 6

7 8 9

0

+100

MUTE

VOLUME

REW/SEARCH PLAY/ FF/SEARCH

STOP/

REC/OTR PAUSE/STILL

MEMORY

CHANNEL

ALT.CH

SLEEP

SPEED

14 Setting the Clock (cont’d)

Automatic PBS Channel Selection

4

If ON appears beside AUTO CLOCK, press the MENU
button. If OFF appears beside AUTO CLOCK, press the
FF/SEARCH B button so that ON appears to the right of
AUTO CLOCK, then press the MENU button.

1

Press the MENU button.

2

Press the PLAY/▲ button or the STOP/▼ button to select
PRIM. SETUP. Then, press the FF/SEARCH B button.

PRIMARY SETUP

> SELECT LANGUAGE

AUTO PROGRAMMING
CH MEMORY REVIEW
VOLUME BAR [ON]
SET CLOCK

SELECT KL CHOOSE B
TO END PRESS EXIT

3

Press the PLAY/▲ button or the STOP/▼ button to select
SET CLOCK. Then, press the FF/SEARCH B button.

2-3

AUTO CLOCK
AUTO CLOCK USES
PBS CHANNEL DATA

> SET PBS CH. AUTO

SET PBS CH. MANUAL

SELECT KL CHOOSE B
TO END PRESS EXIT

> PRIM. SETUP

VCR PROGRAM
VCR SETUP
CAPTION
REMINDER
BRIGHTNESS

PRESS B

1
4

SET CLOCK

> AUTO CLOCK [ON]

SET MANUAL CLOCK
DAYLIGHT SVG.TIME [ON]
SET TIME ZONE

[AUTO]

TO CONTINUE PRESS MENU
SELECT KL CHOOSE B

TO END PRESS EXIT

CCZ130comb 4/5/99 7:32 PM Page 14

POWER CLEARSTATUS/EXIT

MENU

1 2 3

4 5 6

7 8 9

0

MUTE

VOLUME

REW/SEARCH PLAY/ FF/SEARCH

REC/OTR PAUSE/STILL

STOP/

+100

MEMORY

CHANNEL

ALT.CH

SLEEP

SPEED

Setting the Clock (cont’d) 15

7

When the TV/VCR finds the PBS channel, the time will
appear on-screen. Press the STATUS/EXIT button.

6

NOW SEARCHING flashes on the TV/VCR screen.
However, you may see the message: “PLEASE TURN OFF TO
SET AUTO CLOCK PLEASE WAIT SEVERAL MINUTES.” If this
message appears, turn off the TV/VCR for a few minutes. When
you turn on the TV/VCR, the time will be set. If the time is not
set, repeat steps 1 - 5. Or, follow the steps on pages 12 - 13 to
set the clock manually or pages 16 - 17 to set the clock with
Manual PBS Channel Selection.

● If CANNOT FIND CLOCK DATA flashes on the

TV/VCR screen, you will be prompted to turn off the
TV/VCR. Turn off the TV/VCR. Leave it off for several min-

utes. When you turn on the TV/VCR again, the clock will be
set.

• To display the time, press the STA­TUS/EXIT button. A status display,
which includes the time, will appear
on the TV/VCR screen. Details are
on page 26.

• You must turn off the TV/VCR for
several minutes during automatic
clock setting. If the clock is not set
when you turn on the TV/VCR,
repeat the steps for Automatic PBS
Channel Selection. If the clock still is
not set, set the clock manually.

• You cannot use the AUTO CLOCK
feature if you don’t receive a PBS
channel that carries a time signal in
your area. Set the clock manually.

Helpful Hints

5

Press the PLAY/▲ button or the STOP/▼ button to
select SET PBS CH. AUTO. Then, press the
FF/SEARCH B button.

SET AUTO CLOCK

TIME – – : – –
DATE – – / – – / – –
NOW SEARCHING

TO END PRESS EXIT

SET AUTO CLOCK

TIME 06 : 30 PM
DATE 07 / 01 / 98

WEDNESDAY

TO END PRESS EXIT

SET AUTO CLOCK

TIME – – : – –
DATE – – / – – / – –

CANNOT FIND CLOCK DATA
TO END PRESS EXIT

6

Wait for the TV/VCR to find
the time.

7

5

CCZ130comb 4/5/99 7:32 PM Page 15

POWER CLEARSTATUS/EXIT

MENU

1 2 3

4 5 6

7 8 9

0

MUTE

VOLUME

REW/SEARCH PLAY/ FF/SEARCH

REC/OTR PAUSE/STILL

STOP/

+100

MEMORY

CHANNEL

ALT.CH

SLEEP

SPEED

16 Setting the Clock (cont’d)

Manual PBS Channel Selection

4

If ON appears beside AUTO CLOCK, press the MENU
button. If OFF appears beside AUTO CLOCK, press the
FF/SEARCH B button so that ON appears to the right of
AUTO CLOCK, then press the MENU button.

1

Press the MENU button.

2

Press the PLAY/▲ button or the STOP/▼ button to select
PRIM. SETUP. Then, press the FF/SEARCH B button.

PRIMARY SETUP

> SELECT LANGUAGE

AUTO PROGRAMMING
CH MEMORY REVIEW
VOLUME BAR [ON]
SET CLOCK

SELECT KL CHOOSE B
TO END PRESS EXIT

AUTO CLOCK
AUTO CLOCK USES
PBS CHANNEL DATA

> SET PBS CH. AUTO

SET PBS CH. MANUAL

SELECT KL CHOOSE B
TO END PRESS EXIT

> PRIM. SETUP

VCR PROGRAM
VCR SETUP
CAPTION
REMINDER
BRIGHTNESS

PRESS B

3

Press the PLAY/▲ button or the STOP/▼ button to select
SET CLOCK. Then, press the FF/SEARCH B button.

2-3

1
4

SET CLOCK

> AUTO CLOCK [ON]

SET MANUAL CLOCK
DAYLIGHT SVG.TIME [ON]
SET TIME ZONE

[AUTO]

TO CONTINUE PRESS MENU
SELECT KL CHOOSE B

TO END PRESS EXIT

CCZ130comb 4/5/99 7:32 PM Page 16

POWER CLEARSTATUS/EXIT

MENU

1 2 3

4 5 6

7 8 9

0

MUTE

VOLUME

REW/SEARCH PLAY/ FF/SEARCH

REC/OTR PAUSE/STILL

STOP/

+100

MEMORY

CHANNEL

ALT.CH

SLEEP

SPEED