How it Works
Philips
Loading...
CCX252AT99
User Manual
52 pgs419.38 Kb0

Philips CCX252AT99 User Manual

IMPORTANT!
Return Your Warranty Registration Card
Within 10 Days. See Why Inside.
TV/VCR Combination CCX252AT
Owner’s Manual
Return your Warranty Registration card today to
ensure you receive all the
benefits
you’re entitled to.
For Customer Use
Enter below the Serial No. which is located on the rear of the cabinet. Retain this information for future refer­ence.
Model No. ______________ Serial No. ______________
Congratulations on your purchase, and welcome to the “family!”
Dear PHILIPS MAGNAVOX product owner:
Thank you for your confidence in PHILIPS MAGNAVOX. You’ve selected one of the best-built, best-backed products available today. And we’ll do everything in our power to keep you happy with your purchase for many years to come. As a member of the PHILIPS MAGNAVOX “family,” you’re enti­tled to protection by one of the most comprehensive warranties and outstanding service networks in the industry. What’s more, your purchase guarantees you’ll receive all the infor­mation and special offers for which you qualify, plus easy access to accessories from our convenient home shopping network. And most importantly you can count on our uncompromising commitment to your total satisfaction. All of this is our way of saying welcome-and thanks for investing in a PHILIPS MAGNAVOX product.
Sincerely,
Robert Minkhorst President and Chief Executive Officer
P.S. Remember, to get the most from your PHILIPS
MAGNAVOX product, you must return your Warranty Registration Card within 10 days. So please mail it to us right now!
Know these
safetysymbols
This “bolt of lightning” indicates
uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your house­hold, please do not remove product covering.
The “exclamation point” calls
attention to features for which
you should read the enclosed lit­erature closely to prevent operating and maintenance problems.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
CAUTION: To prevent electric shock, match wide blade of plug to wide slot, and fully insert.
ATTENTION: Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la borne corre­spondante de la prise et pousser jusqu’au fond.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
PHILIPS MAGNAVOX
Visit our World Wide Web Site at http://www.magnavox.com
R
E
G
I
S
T
R
A
T
I
O
N
N
E
E
D
E
D
W
I
T
H
I
N
1
0
D
A
Y
S
Hurry!
t
s
Warranty Verification
Registering your product within 10 days confirms your right to max­imum protection under the terms and conditions of your PHILIPS MAGNAVOX warranty.
Owner Confirmation
Your completed Warranty Registration Card serves as verification of ownership in the event of product theft or loss.
Model Registration
Returning your Warranty Registration Card right away guar­antees you’ll receive all the informa­tion and special offers which you qualify for as the owner of your model.
Introduction 3
• Before doing anything else, record the TV/VCR’s model and serial num­bers in the spaces provided on page two. These numbers will help us assist you if you ever call for help.
Helpful Hint
Features
• HQ (High Quality) System
• Automatic Channel Programming
• On-Screen Displays in English or Spanish
• Automatic Tracking Adjustment
• One Touch Recording
• Unattended (Timer) Recording
• Special Effects Playback: Forward and Reverse Searching; Still
• Remote Control
• Automatic Operation Features
• Closed Caption System
• Automatic Clock Setting
• Daylight-Saving Time
• On-Screen Menu System with Front Panel Button Access
Safety Precautions
Warning: To prevent fire or shock hazard, do not expose this equipment to rain or moisture. FCC Warning: Any unauthorized changes or modifica­tions to this equipment void the user’s authority to oper­ate it.
This TV/VCR, equipped with a HQ (High Quality) system, is com­patible with existing VHS (video home system) equipment.
Philips Consumer Electronics Company recommends that you use only video cassette tapes that have been tested and inspected for use in two, four, six, and eight hour VCRs, and which are labeled with the mark. The use of tapes that have not been inspected for use in two, four, six, and eight hour VCRs may result in poor picture quality and excessive deposits on the video heads, which may not be covered by the warranty if damage occurs.
Note to the Cable TV System Installer: This reminder is provided to call the Cable TV system installer’s attention to Article 820-40 of the National Electrical Code, which provides guidelines for proper grounding – in particular, specifying that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as possible.
Copyright 1997 Philips Consumer Electronics Company. All rights reserved.
Welcome to your TV/VCR owner’s manual.
This manual has six sections: Setting Up Your TV/VCR; Description of Controls; Basic Operations; Recording Options; Playing Options; and Information You May Need. The instructions explain all of the TV/VCR’s fea­tures, which are listed below. You cannot hurt your TV/VCR by trying the features! So read on – and relax.
4 Table of Contents
Setting Up Your TV/VCR
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Before Using the TV/VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Hooking Up the TV/VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 - 7
Turning On the TV/VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Language Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Channel Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 - 11
Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 - 17
Daylight-Saving Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Time Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Description of Controls
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Remote Control Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 - 23
Adjusting the Picture Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 - 25
On-Screen Status Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Reminder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Basic Operations
Playing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Recording Options
One Touch Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Rerecording (Tape Duplication) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 - 35
Record Defeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Playing Options
Setting the Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Closed Captioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38 - 39
Volume Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Repeat Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
A - B Repeat Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42 - 43
Real Time Counter Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Automatic Operation Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Playback Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Information You May Need
Specifications / Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Helpful Hints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 - 49
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
• The remote control and its batteries are supplied.
• Do not mix alkaline and man­ganese batteries.
• Do not mix old and new batteries.
Before Using the TV/VCR 5
Putting Batteries in the Remote Control
1
Remove the battery compartment lid on the bottom of the remote control by sliding it in the direction of the arrow.
2
Place two AA batteries inside the battery compartment with their polarities (+and –ends) aligned as indicated.
3
Replace the battery compartment lid.
Using the Remote Control
● Point the remote control at the TV/VCR’s remote sensor.
● Do not put objects between the remote control and the
TV/VCR.
TV/VCR Maintenance
● In this TV/VCR, use only tapes with the mark.
● Make sure any light adhesive stick-on notes are removed from
the video cassette tape before putting the tape in the TV/VCR. Removable labels like these can jam the TV/VCR.
● Periodic maintenance is required to maintain your TV/VCR’s
continued excellent performance. This TV/VCR has an automatic head cleaning system. However, the video heads will eventually require cleaning or replacement. Cleaning or replacement of the video heads should be performed by an authorized service cen­ter.
Video cassette tapes have record tabs to ensure that recordings are not accidentally erased.
1
To prevent accidental erasure, break off the tab with a screwdriver.
2
To record again, cover the hole with cellophane tape.
Erase Protection
Helpful Hints
1 2
1 2
3
6 Hooking Up the TV/VCR
Hooking Up Your TV/VCR With a Cable Signal or Outdoor Antenna
Connect an RF coaxial cable (75­ohm, not supplied) to the OUT Jack on the Cable Box and to the ANT(enna) Jack on the TV/VCR.
Connect a Cable signal or an antenna to the ANT(enna) Jack.
Hooking Up Your TV/VCR With a Cable Box
To view any channel, set the TV/VCR to the Cable Box output channel (channel 03 or 04). Then, select channels at the Cable Box.
1
Hook up your TV/VCR using one of the connections shown.
A.
B.
ANT.
ANT.
Rod Antenna
(not supplied)
Hooking Up Your TV/VCR With an Indoor Antenna
To install a rod antenna (not sup­plied), push the stem of the antenna into the antenna hole on the top of the TV/VCR. Connect the antenna wire to the ANT(enna) Jack on the back of the TV/VCR as shown. Extend the antenna and adjust its length, direction, and angle for the clearest picture.
C.
Connect the Cable signal to the IN Jack on the Cable Box.
ANT.
ANT.
ANT.
OUT
IN
ANT.
Hooking Up the TV/VCR (cont’d) 7
AUDIO
POWERSTOP REWPLAY F.FWDREC/OTRVOLUME CHANNELEARPHONE
EJECT
REC
OUT
IN
VIDEO
IN
OUT
3CH 4CH
AUDIO
ANT.
OUT
IN
VIDEO
IN
OUT
3CH 4CH
AUDIO
ANT.
VIDEOAUDIO
• Before connecting the rod antenna or coaxial cable to the ANT(enna) Jack, make sure the pin is not bent. If the pin is bent, straighten it as illustrated, then connect it to the ANT(enna) Jack.
• A rod antenna (not supplied) is available from Philips Service Company. The part number is 4835 303 37006. To order, call 1-800-851-8885.
• Audio and video cables are not supplied.
Helpful Hints
Crooked Pin
Straight Pin
Hooking Up Your TV/VCR to Another Video Source (VCR or Camcorder)
You may need this connection if you want to copy tapes.
Details are on page 31.
AUDIO/VIDEO Jacks on front of TV/VCR
AUDIO/VIDEO OUT Jacks on VCR
Use an Audio cable to connect the AUDIO OUT Jack on the VCR to the AUDIO (In) Jack on the front of the TV/VCR.
Use a Video cable to connect the VIDEO OUT Jack on the VCR to the VIDEO (In) Jack on the front of the
2
Plug in the TV/VCR.
3
Before you turn on the TV/VCR, go to page eight.
D.
8 Turning On the TV/VCR
Before you turn on the TV/VCR, make sure there are batteries in the remote control (details are on page five) and the TV/VCR is hooked up correctly (details are on pages six - seven). The instructions on this page work only when you turn on the TV/VCR for the first time.
1
Press the POWER button. The TV/VCR will come on and the
language select display screen shown below will appear.
2
Press the Number 1 button to select English on-screen displays or press the Number 2 button to select Spanish on-screen displays.
3
Press the STATUS/EXIT button. The channel program dis-
play screen shown below will appear.
4
Press the F.FWD/+ button to begin automatic channel programming. AUTO SET PROCEEDING / PLEASE WAIT will
appear on-screen. The TV/VCR will place all of the channels you receive into its memory, so when you scan through channels using the CHANNEL Up/Down buttons, you’ll only scan through chan­nels that you receive. When channels are programmed, CHAN­NELS ARE SET will appear on-screen briefly. Then the TV/VCR will go to the lowest channel programmed. (If you try to program channels when there is no antenna or cable connected to the TV/VCR, programming will appear to take place, but eventually a NO TV SIGNALS ... message will appear on-screen. Connect an antenna or cable to the TV/VCR, then try again. You may need to follow the steps on pages nine - 11 instead.)
CONNECT ANTENNA OR CABLE TO TVCR
THEN PRESS+
TO END PRESS EXIT
SELECT LANGUAGE 1 ENGLISH ON 2 ESPAÑOL
MAKE SELECTION OR PRESS EXIT TO CONTINUE
5
Now, you may use the CHANNEL Up/Down buttons or the Number buttons on the remote control to select a TV/VCRchan­nel. Use the VOLUME Up/Down buttons to adjust the sound.
• If you do not see any on-screen dis­plays when you turn on the TV/VCR, check your hook-ups, then try again. If you still do not see any on-screen displays, follow the steps on pages nine - 11 to select a language and program channels.
• To skip this feature and play a tape immediately, insert a tape with its record tab removed. Playback will begin. Or, to skip step 2, press the STATUS/EXIT button before pro­ceeding. All on-screen displays will be inEnglish. To skip step 4, press the STATUS/EXITbutton before proceeding. Channels will not be programmed, and CHANNELS NOT SET will appear on-screen briefly.
• You cannot program channels if you are using a Cable Box.
• Line Input mode will always be stored in the TV/VCR’s memory as channel 00. When you select chan­nel 00, A/V IN will appear on­screen briefly. Press the CHANNEL Up/Down buttons or Number but­tons to select another channel.
Helpful Hints
1 2
3
4
o
PLAY
STOP
p
+100
MUTE
PAUSE/STILL
CLEAR
CHANNEL
VOLUME
F.FWD
TRACKING
SLEEP
ALT.CH
o
p
o
p
o
p
POWER
2 3
1
5 6
4
8 9
7
0
SPEED
– +
REW
REC/OTR
MEMORY
MENU
STATUS/EXIT
Language Selection 9
Follow the steps below to change the language of the on-screen displays.
3
Press the Number 1 button to choose SELECT LAN­GUAGE. (If the menu is in Spanish, press the Number 1 button
to select SELECCION IDIOMA.)
4
Press the Number 1 button if you want the on-screen dis­plays in English. ON will appear to the right of ENGLISH on- screen. Or, press the Number 2 button if you want the on­screen displays in Spanish. SI will appear to the right of
ESPAÑOL on-screen.
5
Press the STATUS/EXIT button.
SELECT LANGUAGE
1 ENGLISH ON 2 ESPAÑOL
MAKE SELECTION OR PRESS EXIT TO CONTINUE
1
Press the MENU button to display the pop up menu.
2
Press the PLAY/▲ button or the STOP/▼ button to select PRIM. SETUP. (If the menu is in Spanish, select PREPARA-
CION.) Then, press the F.FWD/+ button.
PRIMARY SETUP
1 SELECT LANGUAGE 2 AUTO PROGRAMMING 3 ADD/DELETE CHANNEL 4 CH. MEMORY REVIEW 5 VOLUME BAR [ON] 6 SET CLOCK
TO SELECT PRESS NUMBER TO END PRESS EXIT
B PRIM. SETUP
VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS
PRESS +
2
1 5
4
3
o
PLAY
STOP
p
+100
MUTE
PAUSE/STILL
CLEAR
SLEEP
ALT.CH
CHANNEL
VOLUME
F.FWD
TRACKING
o
p
o
p
o
p
POWER
2 3
1
5 6
4
8 9
7
0
SPEED
– +
REW
REC/OTR
MEMORY
MENU
STATUS/EXIT
10 Channel Memory
Although the TV/VCR may automatically memorize the channels you receive when you turn it on for the first time, you may pro­gram channels again. Follow the steps below to program channels.
1
Press the MENU button to display the pop up menu.
TO ADJUST PRESS +/-
B INPUT
EXIT PRIM. SETUP VCR PROGRAM VCR SETUP CAPTION
CABLE
2
Press the PLAY/▲ button or the STOP/▼ button to select INPUT. Press the REW(ind)/– button or the F.FWD/+ button until ANTENNA or CABLE (whichever you have) appears to the right of the pop up menu.
3
Press the STOP/▼ button repeatedly to select PRIM. SETUP, then press the F.FWD/+ button.
PRIMARY SETUP
1 SELECT LANGUAGE 2 AUTO PROGRAMMING 3 ADD/DELETE CHANNEL 4 CH. MEMORY REVIEW 5 VOLUME BAR [ON] 6 SET CLOCK
TO SELECT PRESS NUMBER TO END PRESS EXIT
4
Press the Number 2 button to select AUTO PROGRAM-
MING. AUTO PROGRAMMING MEMORIZED CH. ... will
appear on-screen. The TV/VCR will place all of the channels you can receive into its memory.
• Line Input mode will always be stored in the TV/VCR’s memory as channel 00. You cannot delete it.
• When you select channel 00, A/V IN will appear on-screen briefly. To exit Line Input mode, use the Number buttons or the CHANNEL Up/Down buttons to select another channel.
• You cannot program channels when the TV/VCR is on channel 00 (A/V INPUT will be selected at INPUT at step 2). Select ANTENNA or CABLE at step 2.
Helpful Hints
5
Wait for a few minutes. When programming is complete,
CHANNELS ARE SET will appear on-screen. Then the program­ming of the lowest channel number placed in the TV/VCR’s mem­ory will appear on-screen. Now, when you press the CHANNEL Up/Down buttons, you will scan only through channels you receive.
1
4
2
5
3
Wait for the TV/VCR to pro­gram channels.
POWER
SPEED
– +
REC/OTR
MENU
1
4
7
REW
2 3
5 6
8 9
0
MEMORY
STATUS/EXIT
o
PLAY
STOP
p
+100
MUTE
PAUSE/STILL
CLEAR
SLEEP
ALT.CH
o
CHANNEL
p
o
VOLUME
p
F.FWD
o
TRACKING
p
6
Channel Memory (cont’d) 11
5
Within five seconds, press the Number 1 button to add that channel or the Number 2 button to delete that chan­nel. If you do not make a choice within five seconds, you will
return to the previous screen. (If you make a mistake, press the Number 3 button to select another channel.)
6
Press the STATUS/EXIT button.
Programming of the channel you added or deleted will appear.
3
Press the Number 3 button to select ADD/DELETE CHANNEL.
SELECT CHANNEL NUMBER
CH – –
TO END PRESS EXIT
4
Enter the channel number you want to add or delete.
CH 12
1 ADD 2 DELETE 3 SELECT ANOTHER CH
TO SELECT PRESS NUMBER TO END PRESS EXIT
• To review the channels memorized
by the TV/VCR, follow these steps.
1) Press the MENU button.
2) Press the PLAY/▲ button or the STOP/▼ button to select PRIM. SETUP. Press the F.FWD/+ button.
3) Press the Number 4 button to select CH. MEMORY REVIEW. A list of programmed channels will appear on-screen.
4) If all the programmed channels don’t fit on-screen, press the Number 1 button. If you do not press the Number 1 button within 10 seconds, the remaining channels will appear on-screen. (If there are no remaining channels, the previous menu will appear.) Or press the Number 2 button to see the previ­ous screen of channels.
5) Press the STATUS/EXIT button once or twice to exit.
Helpful Hint
1
Press the MENU button to display the pop up menu.
TO ADJUST PRESS +/-
B INPUT
EXIT PRIM. SETUP VCR PROGRAM VCR SETUP CAPTION
CABLE
2
Press the PLAY/▲ button or the STOP/▼ button to select PRIM. SETUP, then press the F.FWD/+ button.
PRIMARY SETUP
1 SELECT LANGUAGE 2 AUTO PROGRAMMING 3 ADD/DELETE CHANNEL 4 CH. MEMORY REVIEW 5 VOLUME BAR [ON] 6 SET CLOCK
TO SELECT PRESS NUMBER TO END PRESS EXIT
Adding/Deleting Channels
1
3 4
5 2
o
PLAY
STOP
p
+100
MUTE
PAUSE/STILL
CLEAR
SLEEP
ALT.CH
o
CHANNEL
p
o
VOLUME
p
F.FWD
o
TRACKING
p
POWER
2 3
1
5 6
4
8 9
7
0
SPEED
– +
REW
REC/OTR
MEMORY
MENU
STATUS/EXIT
12 Setting the Clock
• Entries that do not match the TV/VCR’s internal calendar will cause a question mark (?) to appear on the TV/VCR screen.
• To make corrections while you are setting the clock, press the CLEAR button until the space for the num­ber you want to correct is flashing. Then enter the correct number.
• To make corrections after you have set the clock, start again at step 1.
• If you press the STATUS/EXIT but­ton when you are setting the clock, the TV/VCR will exit Set Clock mode and return to the program you were watching.
Helpful Hints
2 1
There are three ways to set the clock: Manually, with Automatic PBS Channel Selection, or with Manual PBS Channel Selection. With manual clock setting, you tell the TV/VCR the current time. The TV/VCR then adjusts the time accordingly. With Automatic or Manual PBS Channel Selection, the TV/VCR gets the current time from your local PBS station. It updates the time by referring to your PBS station broadcasts. If you use either Manual PBS Channel Selection or Automatic PBS Channel Selection, follow the steps on page 19 to have the TV/VCR update the clock according to your Time Zone.
Cable Box users should set the clock manually.
To set the clock manually, follow the steps on pages 12 -13. To set the clock using Automatic PBS Channel Selection, follow the steps on pages 14 - 15. To set the clock using Manual PBS Channel Selection, follow the steps on pages 16 - 17. Before you begin, make sure:
● The TV/VCR is hooked up and turned on. Details are on pages
six - eight.
● Channels are programmed. Details are on pages 10 - 11.
● You make each entry within 60 seconds of the previous entry.
(If you do not, you may start again at step 1.)
Manual Clock Setting
1
Press the MENU button to display the pop up menu.
2
Press the PLAY/▲ button or the STOP/▼ button to select PRIM. SETUP. Then, press the F.FWD/+ button.
PRIMARY SETUP
1 SELECT LANGUAGE 2 AUTO PROGRAMMING 3 ADD/DELETE CHANNEL 4 CH. MEMORY REVIEW 5 VOLUME BAR [ON] 6 SET CLOCK
TO SELECT PRESS NUMBER TO END PRESS EXIT
B PRIM. SETUP
VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS
PRESS +
SET CLOCK
1AUTO CLOCK [ON] 2SET MANUAL CLOCK 3DAYLIGHT SVG.TIME [ON] 4SET TIME ZONE
[AUTO]
TO CONTINUE PRESS MENU TO SELECT PRESS NUMBER TO END PRESS EXIT
3
Press the Number 6 button to select SET CLOCK.
3
o
PLAY
STOP
p
+100
MUTE
PAUSE/STILL
CLEAR
SLEEP
ALT.CH
CHANNEL
VOLUME
F.FWD
TRACKING
o
p
o
p
o
p
POWER
2 3
1
5 6
4
8 9
7
0
SPEED
– +
REW
REC/OTR
MEMORY
MENU
STATUS/EXIT
Setting the Clock (cont’d) 13
5
Press two Number buttons for the hour(s) and two Number buttons for the minute(s). Then press 1 for AM or 2 for PM. For example, for 9:30 PM, press 09, 30, 2.
SET MANUAL CLOCK
TIME 09 : 30 PM
MONTH – – / – – / – –
TO CORRECT PRESS CLEAR TO END PRESS EXIT
6
Press two Number buttons for the month, two Number buttons for the day, and two Number buttons for the year. For example, for July 1, 1997, press 07, 01, 97. The day of
the week will appear automatically.
7
Press the STATUS/EXIT button to start the clock. The
screen will return to the program you were watching.
SET MANUAL CLOCK
TIME 09 : 30 PM DATE 07 / 01 / 97
TUESDAY
TO CORRECT PRESS CLEAR TO END PRESS EXIT
4
Press the Number 2 button to select SET MANUAL CLOCK.
SET MANUAL CLOCK
TIME – – : – – DATE – – / – – / – –
TO END PRESS EXIT
5 6
4
7
REW
PLAY
POWER
SPEED
MUTE
SLEEP
ALT.CH
CHANNEL
VOLUME
REC/OTR
STATUS/EXIT
MEMORY
PAUSE/STILL
MENU
CLEAR
TRACKING
STOP
F.FWD
– +
o
o
p
p
o
p
o
p
1
2 3
4
5 6
7
8 9
0
+100
14 Setting the Clock (cont’d)
Automatic PBS Channel Selection
4
If ON appears beside AUTO CLOCK, press the MENU button. If OFF appears beside AUTO CLOCK, press the Number 1 button so that ON appears to the right of AUTO CLOCK, then press the MENU button.
1
Press the MENU button to display the pop up menu.
2
Press the PLAY/▲ button or the STOP/▼ button to select PRIM. SETUP. Then, press the F.FWD/+ button.
PRIMARY SETUP
1 SELECT LANGUAGE 2 AUTO PROGRAMMING 3 ADD/DELETE CHANNEL 4 CH. MEMORY REVIEW 5 VOLUME BAR [ON] 6 SET CLOCK
TO SELECT PRESS NUMBER TO END PRESS EXIT
B PRIM. SETUP
VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS
PRESS +
SET CLOCK
1 AUTO CLOCK [ON] 2 SET MANUAL CLOCK 3 DAYLIGHT SVG.TIME[ON] 4 SET TIME ZONE
[AUTO]
TO CONTINUE PRESS MENU TO SELECT PRESS NUMBER TO END PRESS EXIT
3
Press the Number 6 button to select SET CLOCK.
2 1
3
4
AUTO CLOCK
AUTO CLOCK USES
PBS CHANNEL DATA
1 SET PBS CH. AUTO 2 SET PBS CH. MANUAL
TO SELECT PRESS NUMBER TO END PRESS EXIT
REW
PLAY
POWER
SPEED
MUTE
SLEEP
ALT.CH
CHANNEL
VOLUME
REC/OTR
STATUS/EXIT
MEMORY
PAUSE/STILL
MENU
CLEAR
TRACKING
STOP
F.FWD
– +
o
o
p
p
o
p
o
p
1
2 3
4
5 6
7
8 9
0
+100
Setting the Clock (cont’d) 15
7
When the TV/VCR finds the PBS channel, the time will appear on-screen. Press the STATUS/EXIT button.
6
NOW SEARCHING flashes on the TV/VCR screen. (However, you may see the message “PLEASE TURN OFF TO SET AUTO CLOCK PLEASE WAIT SEVERAL MINUTES.” If this message appears, turn off the TV/VCR for a few minutes. When you turn on the TV/VCR, the time will be set. If the time is not set, repeat steps 1 - 5. Or, follow the steps on pages 12 - 13 to set the clock manually or pages 16 - 17 to set the clock with Manual PBS Channel Selection.)
● If CANNOT FIND CLOCK DATA flashes on the
TV/VCR screen, you will be prompted to turn off the TV/VCR. Turn off the TV/VCR. Leave it off for several min-
utes. When you turn on the TV/VCR again, the clock will be set.
• To display the time, press the STA-
TUS/EXIT button. A status display, which includes the time, will appear on the TV/VCR screen. Details are on page 26.
• If you press the STATUS/EXIT but-
ton while you are setting the clock, the screen will exit Set Clock mode and return to the program you were watching. If this happens, start over.
• You must turn off the TV/VCR for
several minutes during automatic clock setting. If the clock is not set when you turn on the TV/VCR, repeat the steps for Automatic PBS Channel Selection. If the clock still is not set, set the clock manually.
• You cannot use the AUTO CLOCK
feature if you don’t receive a PBS channel that carries a time signal in your area. Set the clock manually.
Helpful Hints
5
Press the Number 1 button to select SET PBS CH. AUTO.
SET AUTO CLOCK
TIME – – : – – DATE – – / – – / – – NOW SEARCHING
TO END PRESS EXIT
SET AUTO CLOCK
TIME 06 : 30 PM DATE 07 / 01 / 97
TUESDAY
TO END PRESS EXIT
SET AUTO CLOCK
TIME – – : – – DATE – – / – – / – –
CANNOT FIND CLOCK DATA TO END PRESS EXIT
REW
PLAY
POWER
SPEED
MUTE
SLEEP
ALT.CH
CHANNEL
VOLUME
REC/OTR
STATUS/EXIT
MEMORY
PAUSE/STILL
MENU
CLEAR
TRACKING
STOP
F.FWD
– +
o
o
p
p
o
p
o
p
1
2 3
4
5 6
7
8 9
0
+100
5
6
7
Wait for the TV/VCR to find the time.
16 Setting the Clock (cont’d)
Manual PBS Channel Selection
4
If ON appears beside AUTO CLOCK, press the MENU button. If OFF appears beside AUTO CLOCK, press the Number 1 button so that ON appears to the right of AUTO CLOCK, then press the MENU button.
1
Press the MENU button to display the pop up menu.
2
Press the PLAY/▲ button or the STOP/▼ button to select PRIM. SETUP. Then, press the F.FWD/+ button.
PRIMARY SETUP
1 SELECT LANGUAGE 2 AUTO PROGRAMMING 3 ADD/DELETE CHANNEL 4 CH. MEMORY REVIEW 5 VOLUME BAR [ON] 6 SET CLOCK
TO SELECT PRESS NUMBER TO END PRESS EXIT
B PRIM. SETUP
VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS
PRESS +
SET CLOCK
1 AUTO CLOCK [ON] 2 SET MANUAL CLOCK 3 DAYLIGHT SVG.TIME[ON] 4 SET TIME ZONE
[AUTO]
TO CONTINUE PRESS MENU TO SELECT PRESS NUMBER TO END PRESS EXIT
3
Press the Number 6 button to select SET CLOCK.
2 1
3
4
AUTO CLOCK
AUTO CLOCK USES
PBS CHANNEL DATA
1 SET PBS CH. AUTO 2 SET PBS CH. MANUAL
TO SELECT PRESS NUMBER TO END PRESS EXIT
o
PLAY
STOP
p
+100
MUTE
PAUSE/STILL
CLEAR
SLEEP
ALT.CH
o
CHANNEL
p
o
VOLUME
p
F.FWD
o
TRACKING
p
POWER
2 3
1
5 6
4
8 9
7
0
SPEED
– +
REW
REC/OTR
MEMORY
MENU
STATUS/EXIT
Loading...
+ 36 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use