Philips CCX134AT User Manual

PHILIPS

MAGNAVOX

TV/VCR Combination

CCXI34AT

Easy Taping^

Owner’s Manual

IMPORTANT

Return Your Warranty Registration Card

Within 1.0 Days. See W'hy Inside.

Return your Warranty Registration card today to

ensure you receive all the benefits you’re entitled to.

Once your PHILIPS MAGNAVOX purchase is registered, you're eligible to receive all the privileges

of ov/ning a PHILIPS MAGNAVOX product So complete and return the Warranty Registration Card enclosed with your purchase at once. And take advantage of these important benefits.

Warranty Verification

¡Registering your product within 110 days confirms your right to max

imum protection under the

terms and conditions of your

PHILIPS MAGNAVOX warranty.

PHILIPS

Congratulations on your purchase, and welcome to the ‘^family!**

MAGNAVOX

Owner Confirmation

Your completed Warranty

Registration Card serves as

verification of ownership in the event of product theft or loss.

Dear PHILIPS MAGNAVOX product owner:

Thank you for your confidence in PHILIPS MAGNAVOX.You’ve selected one of the best-built, best-backed products available today. And we’ll do everything in our power to keep you happy with your purchase for many years to come. As a member of the PHILIPS MAGNAVOX "femily,” you’re entitled to protection by one of the most comprehensive warranties and outstanding service networks in the industry. What’s more, your purchase guarantees you’ll receive all the infor mation and special offers for which you qualify, plus easy access to accessories from our convenient home shopping network. And most importantly you can count on our uncompromising commitment to your total satisfaction. All of this is our way of saying welcome-and thanks for investing in a PHILIPS MAGNAVOX product.

Sincerely,

Model Registration

Returning your Warranty Registration Card right av/ay guar antees you’ll receive all the infonnation and special offers which you qualify for as the owner of your model.

Know these

S3.f©tysymfao/s

RISK OF EtECTR^C SHOCK

cüimûiiîTa it£ûucemci$icc? EtEcnnc skw оогятг

RE^t’ir/E COVER |0R CACKL FJO USER^EiruTCCAEtE PA5tT3

IfiSæL REFER ££РПЛС1^:3 TO QUAUFiED SERITCE PERGO::r:EL

This “bolt of lightning’ indicates

uninsulated material within your

unit may cause an electrical shock. For the safety of everyone in your house hold, please do not remove product covering.

The "exclamation point” calls

attention to features for which you should rrad the enclosed lit

erature closely to prevent operating and maintenance problems.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

CAUTIONiTo prevent electric shock, match wide blade of plug to wide slot, and fully insert

ATTENTION: Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la borne corre spondante de la prise et pousser jusqu'au fond.

DOTiUTQPtTà

For Customer Use

Robert Minkhorst President and Chief Executive Officer

P.S. Remember, to get the most from your PHILIPS

MAGNAVOX product, you must return your

Warranty Registration Card within 10 days. So please mail it to us right now!

Enter below die Serial No, which is located on the rear of the cabinet Retain this information for future refer ence.

Model No. Serial No.

PHILIPS MAGNAVOX Visit ourWorld Wide Web Site at http://wjvw.magnavGX.conr]

____________

Welcome to yourTVA/CR owner’s manual.

This manual has six sections: Setting UpYourTV/VCR; Description of Controls; Basic Operations; Recording Options; Playing Options; and Information You May Need.The instructions explain all of the TV/VCR’s fea tures, which are listed below.You cannot hurt yourTVA/CR by trying the features! So read on - and relax.

Features

“ HQ (High Quality) System

“ Automatic Channel Programming * On-Screen Displays in English or Spanish “ On-Screen Menu System, Accessible with Remote Control or

Front Panel Buttons “ Automatic Tracking Adj ustment " One Touch Recording “ Unattended (Timer) Recording * Special Effects Playback: Forward and Reverse Searching; Still;

Variable Slow; Frame Advance * Remote Locator " Automatic Operation Features

Closed Caption System

" Automatic Clock Setting * Daylight-Saving Time “ VCR Plus+ Programming System « Smart Sound « Index Search Function « Skip Search Function

Safety Precautions

Warning:To prevent fire or shock hazard» do not expose this equipment to rain or moisture.

FCC Warning;Any unauthorized changes or modifications

to this equipment void the user*s authority to operate it. This TV/VCR, equipped with a HQ (High Quality) system, is com

patible with existing VHS (video home system) equipment. Philips Consumer Electronics Company recommends that

you use only video cassette tapes that have been tested and

inspected for use in two, four, six, and eight hour VCRs, and which

are labeled with the IVHSl mark. The use of tapes that have not

been inspected for use in two, four, six, and eight hourVCRs may result in poor picture quality and excessive deposits on the video heads, which may not be covered by the warranty if damage occurs.

Note to the Cable TV System Installer: This reminder is pro

vided to cail the Cable TV system installer’s attention to Article 820-40 of the National Electrical Code, which provides guidelines for proper grounding - in particular, specifying that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as possible.

Copyright 1997 Philips Consumer Electronics Company.All rights reserved.VCR Plus+ and PlusCode are trademarks of Gemstar Development Corporation.TheVCR Plus+ system is manufactured under license from Gemstar Development Corporation.

Helpful Hint

Before doing anything else, record the JV/VCR's model and serial num bers in the spaces provided on page two.These numbers will help us assist you if you ever call for help.

4 Table of Contents

Setting UpYourTV/VCR

Introduction .............................................................................................................................3

Table of Contents.....................................................................................................................4

Before Using the TV/VCR........................................................................................................5

Hooking Up theTVA/CR........................................................................................................6-7

Turning On the TV/VCR...........................................................................................................8

Language Selection .............................................................................................................. 9

Channel Memory............................................................................................................. 10-11

Setting the Clock............................................................................................................12-17

Daylight-Saving Time ............................................................................................................18

Time Zone .............................................................................................................................19

Setting the Remote to Operate a Cable Box/Digital Satellite System

Description of Controls

Front Panel............................................................................................................................ 22

Rear Panel.............................................................................................................................23

Remote Control Buttons................................................................................................24-25

Adjusting the Picture Controls ...............................................................................................26

Smart Picture ........................................................................................................................ 27

Volume Bar / Smart Sound ...................................................................................................28

Remote Locator.....................................................................................................................29

On-Screen Status Displays....................................................................................................30

Reminder ..............................................................................................................................31

.............................

20-21

Basic Operations

Playing...................................................................................................................................32

Recording..............................................................................................................................33

Recording Options

One Touch Recording............................................................................................................34

Rerecording (Tape Duplication).............................................................................................35

Timer Recording ............................................................................................................36-39

Setting Up the VCR Plus+ Programming System

Timer Recording With theVCR Plus+ Programming System ........................................42-43

Record Defeat...................................................................................................................... 44

........................................................

40-41

Playing Options

Setting the Sleep Timer.........................................................................................................45

Closed Captioning.........................................................................................................46-47

A - B Repeat Playback...................................................................................................48-49

Repeat Playback ...................................................................................................................50

Real Time Counter Memory..................................................................................................51

Index Search..........................................................................................................................52

Automatic Operation Features ..............................................................................................53

Playback Options ..................................................................................................................54

Information You May Need

Specifications / Glossary.......................................................................................................55

Helpful Hints...................................................................................................................56-57

Limited Warranty ...................................................................................................................58

Index......................................................................................................................................59

Supplied Accessories.............................................................................................................60

Before Using the TVIVCR 5

Putting Batteries in the Remote Control

Remove the battery compartment (id on the bottom of

the remote control by pressing in the tab» then lifting the

lid.

Place three AA batteries inside the battery compartment

v/ith their polarities (+ and - ends) aligned as indicated.

Replace the battery compartment lid.

Removing the Shipping Card

o A shipping card may be inserted in the cassette compartment of

theP//VCR. Before you insert a cassette tape, you must remove the shipping card.To remove the card, open the cassette com partment, then grasp the adhesive tape and remove the card.

Erase Protection

Video cassette tapes have record tabs to ensure that recordings

are not accidentally erased.

To prevent accidental erasure» break off the tab with a screwdriver.

To record again» cover the hole with cellophane tape.

Using the Remote Control

o Point the remote control at the TVA^CR’s remote sensor when

using the remote control to operate theTVA/CR. Point the

remote control at the Cable Box or Digital Satellite System

when using the remote control to operate the Cable Box or

Satellite System.

o Do not put objects between the remote control and the

TV/VCR.

o Before you use the remote control to operate your Cable Box

or Digital Satellite System, you must first press the CABLE/DSS

button.

TV/VCR Maintenance

o In this TV/VCR, use only tapes with the lyHSl mark. o Make sure any light adhesive stick-on notes are removed from

the video cassette tape before putting the tape in the TV/VCR.

Removable labels like these can jam the TV/VCR.

o Periodic maintenance is required to maintain yourTV/VCR’s con

tinued excellent performance.This TV/VCR has an automatic

head cleaning system. However, the video heads will eventually require cleaning or replacement. Cleaning or replacement of the

video heads should be performed by an authorized service cen

ter.

□

Hetpful Hints

* The remote control and its batteries

are supplied,

“ Do not mix alkaline and manganese

batteries.

• Do not mix old and new batteries.

№oldn;U(iTli«7Y/rCR

Hook up yous"TY/VGR using one of the connections shown.

Hooking UpYourTVAfCR

With a Cable Signal oi*

Outdoor Antenna

L^o

Hooking UpYourTV/VCiR With a Cable Eox/Digital Satellite System

To view any channel, set theTV/VCR

to the Cable Box/Digital Satellite

System output channel (channel 03 , or 04).Then, select channels at the

Cable Box/Digital Satellite System.

Hooking UpYourTV/VCR

With an Indoor Antenna

To install a rod antenna (not sup plied), push the stem of the antenna into the antenna hole on the top of theTV/VCR. Connect the antenna wire to the ANT(enna) Jack on the back of theTV/VCR as shown. Extend the antenna and adjust its length, direction, and angle for the clearest picture.

Hooking Up Your TV/VCR to Another Video Source

(VCR or Camcorder)

You may need this connection

if you want to copy tapes. Deta/te are on page 3S.

Hooking up The TVIVCR (confd) 7

Use an Audio cable to connect the AUDIO

Use aVideo cable to connect theVlDEO OUT Jack on the

VCR to the VIDEO Jack on the front of the TV/VCR.

Plug in the TV/VCR,

Before you turn on the TV/VCR, go to page eight.

Helpful Hints

Before connecting the rod antenna or coaxial cable to theANT(enna) Jack, make sure the pin is not bent If the

pin is ben% straighten it as illustrated, then connect it to the ANT(enna) jack.

A rod antenna (not supplied) is available from Philips Service Company.The part number is 4835 3033 7006.

To order, call 1-800-851-8885.

Audio and video cables are not supplied.

Crooked Pin

Straight Pin

8 Turning On theTV/VCR

Before you turn on theTV/VCR, make sure there are batteries in

the remote control (details are on page five) and theTV/VCR is hooked up correctly (details are on pages six - seven). The instructions on this page work only when you turn on the TV/VCR for the first time.

Press the COMBI button, then the POWER button. The TV/VCR will come on and the language select display screen shown below will appear.

SELECT LANGUAGE

1 ENGUSH OK

2 ESPAÑOL

MAKE SELECTION OR

' PRESS EXrTTO CONTINUE

Press the Number I button to select English on-screen displays or press the Number 2 button to select Spanish on-screen displays.

pD CD DT

j>« tii-tr

(0)0 0 0

PH1UPSCES23

Press the STATUS/EXIT button. The channel program display screen shown below will appear.

/OC№ECrANlB'!NAORCiVSLE

{ Tn

TOTVCR

TUBJ PRESS+

TO END PRESS EXIT

Press the Fast Forward/Search/+ button to begin auto matic channel programming, AUTO SET PROCEEDING will appear on-screen.The TV/VCR will place all of the channels you receive into its memory, so when you scan through channels using

the CH(annel) Up/Down buttons, you’ll only scan through chan nels that you receive-When channels are programmed, CHAN

NELS ARE SET will appear on-screen briefly.Then theTV/VCR will

go to the lowest channel programmed. (If you try to program channels when there is no antenna or cable connected to theTV/VCR, programming will appear to take place, but eventually a NO TV SIGNALS ... message will appear on screen. Connect an antenna or cable to theTV/VCR, then try again.You may need to follow the steps on pages nine - 11 instead.)

Now, you may use the CH(annel) Up/Down buttons or the

Number buttons on the remote control to select a TV/VCR chan nel- Use the VOL(ume) Up/Down buttons to adjust the sound.

_____

Helpful Hmts

If you do not see any on-screen dis

plays when you turn on the TV/VCR,

check your hook-ups, then try again.

If you stf// do not see any on-screen displays, follow the steps on poges

nine - I { to select a language and

program channels. To skip this feature and play a tape immediately, insert a tape with Us record tab removed. Playback will begin. Or, to skip step 2, press the STATUS/EXIT button before pro ceeding. AH on-screen displays will be In English.To skip step 4, press the

S7ATLfS/£X/T button before pro

ceeding. Channels wili not be pro

grammed, and CHANNELS NOT

SET will appear on-screen briefly. You cannot program channels if you are using a Cable Box,

Line Input mode will alv/ays be

stored in theTV/VCR's memory as

channel 00. When you select chan nel 00,A/V IN will appear on-screen briefly. Press the CH(annel)

Up/Down buttons or Number but

tons to select another channel.

Follow the steps below to change the language of the on-screen displays.

Press the COMBI button^then the MENU button to dis play the pop up menu.

► PRIM. SETUP

VCR PROGRAM VCR SETUP

CAPTION REMINDER BRIGHTNESS

Press the Play/A button or the Stop/T button to select PRIM. SETUP. (If the menu is in Spanish, select PREPARACION.)

Then, press the Fast Forward/Search/+ button.

PRIMARY SETUP

1 SELECT LANGUAGE 2 AUTO PROGRAMMING 3 ADD/DELETE CHANNEL ^ CH. MEMORY REVIEW

5 VOLUME BAR [ON]

6 SET CLOCK 7 REMOTE LOCATOR

TO SELECT PRESS NUMBER TO END PRESS EXIT

1 PRESS + 1

r „ ..

Language Selection 9

Press the Number I button to choose SELECT LAN GUAGE. (If the menu is in Spanish, press the Number I button to select SELECCION IDIOMA.)

SELECT LANGUAGE

1 ENGUSH

2 ESPAÑOL

MAKE SELECTION OR PRESS EXrrTO CONTINUE

Press the Number I button if you want the on-screen dis plays in English. ON will appear to the right of ENGLISH on screen. Or, press the Number 2 button if you want the on screen displays in Spanish. SI will appear to the right of ESPAÑOL on-screen.

Press the STATUS/EXIT button.

Channel Memory

Although theTVA/'CR may automatically memorize the channels

^ou receive v/hen you turn it on for the first time, you may pro

gram channels again. Follow the steps below to program channels.

Press the COMBI button, then the MENU button to dis play the pop up menu.

'to ADJUST PRESS +/-

[> INPUT r

EXIT PRIM. SETUP VCR PROGRAM VCR SETUP L

Press the Play/A button or the Stop/V button to select INPUT. Press the Rewind/Search/- button or the Fast Forward/Search/*** button until ANTENNA or CABLE (whichever you have) appears to the right of the pop up menu.

1 CABLE 1

Walt for theTVA^CR to pro gram channels.

Press the Stop/V button repeatedly to select PRIM.

SETUP, then press the Fast Forward/Search/*^ button.

PRIMARY SETUP \

1 SELECT LANGUAGE 2 AUTO PROGRAMMING 3 ADD/DELETE CHANNEL

4 CH. MEMORY REVIEW 5 VOLUME BAR [ONI

6 SET CLOCK 7 REMOfTE LOCATOR

TO SELECT PRESS NUMBER TO END PRESS EXIT

Press the Number 2 button to select AUTO PROGRAM

MING. AUTO PROGRAMMING MEMORIZED CH....will appear

on-screen.The TV/VCR will place all of die channels you can

receive into its memory.

Wait for a fev/ minutes. When programming is complete,

CHANNELS ARE SET will appear on-screen.Then the program ming of the lowest channel number placed in theTV/VCR’s memo ry will appear on-screen. Now, when you press the CH(annel) Up/Down buttons, you will scan only through channels you receive.

» Line input mode wil/ always be

stored in the TV/VCR^s memory as channel 00. You cannot delete it

“ You cannot program channels when

the 7Y/YCR is on channel 00 (A/V

IN will be selected at INPUT at step

2). SelectANTENNA or CABLE at

step 2.

Adding/Deleting Channels

Press the COMBI button» then the MENU button to dis play the pop up menu.

Channel Memory (confd) 11

► PRIM.SETUP

VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS

1 PRESS + 1

Press the Play/A button or the Stop/T button to select PRIM. SETUP, then press the Fast Forward/Search/*}- button.

PRIMARY SETUP

1 SELECT LANGUAGE

2 AUTO PROGRAMMING

3 ADD/DELETE CHANNEL 4 CH. MEMORY REVIEW 5 VOLUME BAR [ON] 6 SET CLOCK 7 REMOTE LOCATOR

TO SELECT PRESS NUMBER TO END PRESS EXIT

Press the Number 3 button to select ADD/DELETE CHANNEL.

SELECT CHANNEL NUMBER

CH^'^

TO END PRESS EXIT

Enter the channel number you want to add or delete.

CH 12

1 ADD

2 DELETE

3 SELECT ANOTHER CH

TO SELECT PRESS NUMBER TO END PRESS EXIT

Within five seconds, press the Number I button to add that channel or the Number 2 button to delete that chan

nel. [f you do not make a choice within five seconds, you will return to the previous screen. (If you make a mistake, press the Number 3 button to select another channel.)

Press the STATUS/EXIT button. Programming of the channel you added or deleted will appear.

m m

|m m nn(~^

hool I g ij |a.ch[

«rctn

o o o o

o o © ©

fO M ] © ©

PHILIPS CEE3

___

Helpful Hint

“ 7b review the channels memorized

by the TVfVCR, follow these steps.

1) Press the MENU button.

2) Press the PlayfA button or the StopfW button to select PRIM.

SETUf! Press the fast

ForwardfSearcb/+ button.

3) Press the Number 4 button to

select CH. MEMORY REVIEW.A list

of programmed channels will appear on-screen.

4) If all the programmed channels don’t fit on-screen, press the Number I button. If you do not press the Number I button within

10 seconds, the remaining channels will appear on-screen. (If there are no remaining channels, the previous menu will appear.) Or press the Number 2 button to see the previ

ous screen of channels.

5) Press the STATUS/EXIT button

once or twice to exit

12 Setting the Clock

There are three ways to set the ciocic Manually, with Automatic

PBS Channel Selection, or with Manual PBS Channel Selection. With manual dock setting, you tell theTYA/CR the current time.TheTV/VCR then adjusts the time accordingly.With Automatic or Manual PBS Channel Selection, theTV/VCR gets the

current time from your local PBS station. It updates the time by

referring to your PBS station broadcasts. If you use either Manual

PBS Channel Selection or Automatic PBS Channel Selection, follow the steps on page 19 to have theTVA/^CR update the clock according to yourTime Zone. To set the clock manually, follow the steps on pages 12 -13,To set the clock using Automatic PBS Channel Selection, follow the steps on pages 14-1 S.To set the clock using Manual PBS Channel Selection, follow the steps on pages 16 - 17.

Before you begin, make sure: o TheTVA^CR is hooked up and turned on. Deia//s are on pages six

- eight.

o Channels are programmed. Details are on pages fO - II. o You make each entry within 60 seconds of the previous entry. (If

you do not, you may start again at step I.)

Manual Clock Setting

Press the COMBI button, then the MENU button to dis

play the pop up menu.

► PRIM-SEnjP

VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS

PRESS +

Press the Play/A button or the Stop/T button to select

PRIM. SETUP-Then, press the Fast Forward/Searchf+ but ton.

PRIMARY SETUP

1 SELECT LANGUAGE 2 AUTO PROGRAMMING 3 ADD/DELETE CHANNEL 4 CH. MEMORY REVIEW 5 VOLUME BAR [ON] 6 SET CLOCK 7 REMOTE LOCATOR

TO SELECT PRESS NUMBER TO END PRESS EXIT

Press the Number 6 button to select SET CLOCK.

SET CLOCK

1 AUTO CLOOC 2 SET MANUAL CLOCK 3 DAYUGHT SVG.TIME 4 SET TIME ZONE

[AUTO]

TO CONTINUE PRESS MENU TO SELECT PRESS NUMBER TO END PRESS EXIT

[ON] [ON]

Helpfu! Hmts

" Entries that do not match the

TV/VCR^s internal calendar will

cause a question mork (?) to appeor on the TV/VCR screen.

“ To make corrections while you are

setting the clock, press the CLEAR button until the space for the num ber you want to correct is flashing. Then enter the correct number.

* To make corrections after you have

set the clock, start again at step L

o If you press the STATUSfEXlT but

ton when you are setting the clock, the TViVCR will exit Set Clock mode

and return to the program you were watching.

Press the Number 2 button to select SET MANUAL

CLOCK.

'^SET MANUAL CLOCK

DATE

TO B'JD PRESS EXIT

Press two Number buttons for the hour(s) and two Number buttons for the minute(s).Then press I for AM or 2 for PM. For example, for 9:30 PM, press 09,30,2,

'^SET MANUAL CLOCK

TIME t»;30PM

MONTH y —

TO CORRECT PRESS CLEAR TO END PRESS EXIT

Setting the Clock (confd) 13

Press two Number buttons for the month» two Number buttons for the day» and two Number buttons for the year. For example, for July 1, 1997, press 07,01,97.The day of die week will appear automatically.

'SET MANUAL CLOCK

TIME 09; 30 PM DATE

07/01 /97 TUESDAY

TO CORRECT PRESS CLEAR TO END PRESS EXIT

Press the STATUS/EXIT button to start the clock. The screen will return to the program you were watching.

Automatic FBS Channel Selection

Press the COMBI button, then the MENU button to dis play the pop up menu.

►•PRIM. SETUP

VCRPROGRAM VCRSETUP

CAPTION REMINDER BRIGHTNESS

Press the Play/A button or the Stop/T button to select PRIM, SETUP.Then, press the Fast Forward/Search/+ but

ton.

PRIMARY SETUP

1 SELECT LANGUAGE 2 AUTO PROGRAMMING 3 ADD/DELETE CHANNEL 4 CH. MEMORY REVIEW 5 VOLUME BAR [ON] 6 SET CLOCK 7 REMOTE LOCATOR

TO SELECT PRESS NUMBER TO END PRESS EXIT

("press + 1

___

)

Press the Number 6 button to select SET CLOCIC

SET CLOOC

1 AUTO CLOCK ION] 2 SET MANUAL CLOCK 3 DAYUGHT SVG.TIME [ON] 4 SETTIME ZONE

[AUTO]

TO CONTINUE PRESS MENU TO SELECT PRESS NUMBER TO END PRESS EXIT

If ON appears beside AUTO CLOCK, press the MENU button. If OFF appears beside AUTO CLOCK, press the Number I button so that ON appears to the right of

AUTO CLOCK, then press the MENU button.

AUTO CLOCK

AUTO CLOCK USES PBS CHANNEL DATA

1 SET PBS CH. AUTO

2 SET PBS CR MANUAL

TO SELECT PRESS NUMBER

TO END PRESS EXIT

Setti ng

Press the Number I button to select SET PBS CH.

AUTO.

/^AUTO CLOCK

TIME —

date —/—f-

NOW SEARCHING

V TO END PRESS EXIT

(o)

NOW SEARCHING flashes on theTV/VCR screen.

However, you may see the message “PLEASE TURN OFFTO SET

AUTO CLOCK PLEASE WAIT SEVERAL MINUTES.” If this mes sage appears, turn off theTVA^CR for a few mi ñutes. When you turn on theTV/VCR, the time will be set

If the time is not set repeat steps I - 5. Or, follow the steps on

pages 12 - 13 to set the clock manually or pages 16- 17 to set the clock with Manual PBS Channel Seleaion.

When theTV/VCR finds the PBS channel, the time will appear on-screen. Press the STATUS/EXIT button.

^etauto clock

TIME 06 :30 PM

DATE

\^T0 END PRESS EXIT

o If CANNOT PIND CLOCK DATA flashes on the

TV/VCR screen, you will be prompted to turn off the TV/VCR.Turn off theTV/VCR. Leave it off for several min utes. When you turn on theTV/VCR again, the clock will be set.

'SETAUTO CLOCK

CANNOT FIND CLOCK DATA

TO END PRESS EXIT

07 / Ot / 97 TUESDAY

TIME —:—

DATE. —/—/ —

the Clock

(con fd) IS

Wait for the TV/VCR to find the time.

□□ n~i

m Œ3 Œ3

CZ] [T] n~i

1I I 0 I 1*^1

<0000

SSïCû vcvw«-

o o © ©

fQ Ol © ©

PHILIPS

_____

tma

He/pful Hints

“ To display the time, press the STA

TUS/EXIT button. A status display, which includes the time, will appear on the TV/VCR screen. Deto/fe are on page 30.

0 If you press the STATUS/EXIT but

ton while you are setting the dock, the screen will exit Set Clock mode and return to the program you were watching. If this happens, start over.

0 You must turn off the TV/VCR for

several minutes during automatic

clock setting. If the clock is not set when you turn on the TV/VCR, repeat the steps for Automatic PBS Channel Selection. If the clock still is not set, set the dock manually.

« You cannot use the AUTO CLOCK

feature if you don^t receive a PBS

channel that carries a time signal in

your area. Set the dock manually.

fé Setting the Clock (confd)

Manual PBS Channel Selection

Press the COHBI button, then the MENU button to dis

play the pop up menu.

t»-PRIM. SETUP

VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS

PRESS + I

Press the Play/A button or the Stop/V button to select PRIM. SETUP.Then, press the Fast Forward/Search/+ but

ton.

PRIMARY SETUP

1 SELECT LANGUAGE

2 AUTO PROGRAMMING

3 ADD/DELETE CHANNEL

4 CH. MEMORY REVIEW

5 VOLUME BAR [ON] 6 SET CLOCK 7 REMOTE LOCATOR

TO SELECT PRESS NUMBER TO END PRESS EXIT

Press the Number 6 button to select SET CLOCK.

SET CLOCK

1 AUTO CLOCK [ON]

2 SET MANUAL CLOCK

3 DAYUGHT SVG.TIME [ON] 4 SETTIME ZONE

[AUTO]

TO CONTINUE PRESS MB'JU TO SEUCr PRESS NUMBER TO END PRESS EXIT

If ON appears beside AUTO CLOCK, press the MENU button. If OFF appears beside AUTO CLOCK, press the Number I button so that ON appears to the right of

AUTO CLOCK, then press the MENU button.

AUTO 0,OCK

AUTO O-OCK USES

PBS CHANNEL DATA

1 SET PBS CH. AUTO

2 SET PBS CH. MANUAL

TO SELECT PRESS NUMBER TO END PRESS EXIT

Setting the Clock (cont’d) 17

Press the Number 2 button to select SET PBS CH. MAN* UAL.

AUTO CLOCK (PBS) CH —

TIME —:—

DATE —J — /—

SELECT CHANNEL NUMBER TO END PRESS EXIT

Use the Number buttons to select your PBS station.

'^AUTO CLOCK (PBS) CH 12

TIME —:—

DATE —t—/ — NOW SEARCHING

TO END PRESS EXIT

NOW SEARCHING flashes on theTVA^CR screen.

I ^

Wait for the TV/VCR to find the time.

When theTV/VCR finds the PBS channel, the time will appear on-screen. Press the STATUS/EXIT button.

^UTO CLOCK (PBS) CH 12

06:30PN

TIME

07/01 /97

DATE

TUESDAY

\^TO END PRESS EXIT

If CANNOT FIND CLOCK DATA flashes on the

TVAfCR screen and you know another PBS channel,

press the Number I button to select SELECT NEW PBS CH. Repeat step 6. If CANNOT FIND CLOCK DATA flashes on the

TV/VCR screen and you do not know another channel,

press the Number 2 button to select SET PBS CH.

AUTO. The TV/VCR will search for the PBS channel automati

cally

• If the PBS channel is found, the time will app^r on-screen.

0 If the PBS channel Is not found, you will be prompted to turn

off theTV/VCR. Leave it off for several minutes. When you turn on theTV/VCR again, the time will be set

Helpful Hints

To make corrections while you are setting the PBS station, press the CLEAR button, then enter the cor rect number.

If you have an Antenna hookup, you

may select channels 2- 69 at step

6. If you have a cable connection,

you may select channels I - 125 at step 6. Deiof/s about available chan nels are on pages 10 - II. To display the time, press the STA

TUS/EXIT button. A status display,

which Includes the time, will appear

on the TV/VCR screen. Details are

on page 30.

18 Daylight-Sevìng Time

When the Daylight-Saving Time feature is ON,theTV/VCR clock will automatically move forward one hour on the first Sunday in April and move back one hour on the last Sunday in October.

Deia/fe are on page 57.

To turn Daylight-Saving Time ON or OFF, follow the steps below.

Press the COMBI button, then the MENU button to dis play the pop up menu.

b-PRIM.SETUP

VCR PROGRAM

VCR SETUP

CAPTION

REMINDER

BRIGHTNESS

1 PRESS + 1

Press the Play/A button or the Stop/T button to select PRIM. SETUP.Then, press the Fast Forward/Search/+ but

ton.

PRIMARY SETUP

1 SELECT LANGUAGE 2 AUTO PROGRAMMING 3 ADD/DELETE CHANNEL 4 CH. MEMORY REVIEW 5 VOLUME BAR [ON] 6 SET CLOCK 7 REMOTE LOCATOR

TO SELECT PRESS NUMBER TO END PRESS EXIT

Press the Number 6 button to select SET CLOCK.

SET CLOCK

1 AUTO CLOCK [ON]

2 SET MANUAL CLOCK

3 DA'IUGHT SVG.TIME [ON] 4 SETTIME ZONE

. [AUTO]

TO CONTINUE PRESS MENU TO SELECT PRESS NUMBER TO END PRESS EXIT

Press the Number 3 button so that ON or OFF appears beside DAYLIGHT SVG.TIME (Daylight-SavingTime).

Press the STATUS/EXIT button.

+ 42 hidden pages