Philips CCD User Manual
Technical specification
CL 76610012_001.AI 00697
100m
0-50m
1
200m
300m
10
CCD CAMERA
Pick-up device 1/3" (Solid state CCD)
No. of picture elements
1
(H) x (V) 512 x 492 (EIA)
CL 46610005/13G
Horizontal resolution > 380 TVL
Light sensitivity 0.5 ~ 30000 lux
Spectral sensitivity range 400 ~ 1000 nm
Signal to noise ratio >48dB
5
2
3
4
12
CL 76610012_002.AI 100697
13
Output A/V RJ 11 E modular 'telephone'
Built-in microphone electret
Lens type integrated
Lens viewing angle 59°H x 46°V
• focal length 4 mm
• relative aperture F 2.0
• focus range 1 ~ ∞ m
Power supply 16 ~ 27 V
Power consumption 50 mA (at 24 V
System cable 4-wire dual twisted pair
Tripod socket 1/4" B.S.W.
1415
Dimensions (WxHxD) 70 x 70 x 79 mm (incl. lens)
Weight 205 gr
512 x 582 (CCIR)
socket
(via system cable)
DC
'telephone' cable
DC
F
A
R
<
>
N
E
A
R
CL 76610011_004.AI
5
)
5
4
3
2
5
4
3
2
2
3
2-3
4
4-5
Ambient conditions Ammonia resistant
Ambient temperature
0 X 1
0 X 1
• operating +10 ~ +55°C
• storage -25 ~ +70°C
Ambient humidity
• operating 20% ~ 90%RH
• storage 99%RH
Specifications may be changed without notice.
2
3
2-3
5
4
4-5
Figure A
CL 76610012_003.AI
Figure B
53
Electro Magnetic Compatibility (EMC)
This equipment complies with European rules for EMC according to
EN55013, EN55020 and EN50082-1.
Operation is subject to the following two conditions:
1 This device may not cause harmful interference.
2 This device must accept any interference received, including interference
that may cause undesired operation.
The equipment conforms with the EMC directive and low-voltage
directive.
This device complies to FCC rules under test conditions that included
use of system cables and connectors between system components. If you
have any problems, contact your dealer.
Warnings
Any unauthorized modification to this equipment may cause violation of
the FCC rules resulting in the revocation of the authorization to operate
the equipment.
To prevent fire or shock hazard, do not expose this accessory to rain or
moisture. Do not attempt to disassemble the camera. In order to prevent
shock and fire hazard, do not remove screws or covers. There are no
user-serviceable parts inside.
The exclamation mark within a triangle is intended to alert the
user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the
appliance.
g
g
1
Loading...