Philips CCC192AT, CCC 132AT, CCC 190AT, CCC 130AT User Manual

CCC130AT CCC132AT CCC190AT CCC192AT
Color TV with built-in VCR Owner’s Manual
Once your PHILIPS purchase is registered, you’re eligible to receive all the privileges of owning a PHILIPS product. So complete and return the Warranty Registration Card enclosed with your purchase at once. And take advantage of these important benefits.
Return your Warranty Registration card today to
benefits
you’re entitled to.
For Customer Use
Enter below the Serial No. which is located on the rear of the cabinet. Retain this infor­mation for future reference.
Model No. ________________ Serial No. ________________
Congratulations on your purchase, and welcome to the “family!”
Dear PHILIPS product owner:
Thank you for your confidence in PHILIPS. You’ve selected one of the best-built, best-backed products available today. And we’ll do everything in our power to keep you happy with your purchase for many years to come. As a member of the PHILIPS “family,” you’re entitled to protection by one of the most comprehensive warranties and outstanding ser­vice networks in the industry. What’s more, your purchase guarantees you’ll receive all the infor­mation and special offers for which you qualify, plus easy access to accessories from our convenient home shopping network. And most importantly you can count on our uncompromising commitment to your total satisfaction. All of this is our way of saying welcome-and thanks for investing in a PHILIPS product.
Sincerely,
Robert Minkhorst President and Chief Executive Officer
P.S. Remember, to get the most from your PHILIPS
product, you must return your Warranty Registration Card within 10 days. So please mail it to us right now!
Know these
safetysymbols
This “bolt of lightning” indi-
cates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering.
The “exclamation point”
calls attention to features for which you should read the enclosed literature closely to prevent operating and mainte­nance problems.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
CAUTION: To prevent elec­tric shock, match wide blade of plug to wide slot, fully insert.
ATTENTION: Pour éviter les choc électriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu’au fond.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
R
E
G
I
S
T
R
A
T
I
O
N
N
E
E
D
E
D
W
I
T
H
I
N
1
0
D
A
Y
S
Hurry!
t
s
Warranty Verification
Registering your product within 10 days confirms your right to max­imum protection under the terms and conditions of your PHILIPS warranty.
Owner Confirmation
Your completed Warranty Registration Card serves as verification of ownership in the event of product theft or loss.
Model Registration
Returning your Warranty Registration Card right away guaran­tees you’ll receive all the informa­tion and special offers which you qualify for as the owner of your model.
Visit our World Wide Web Site at http://www.philips.com
Introduction 3
Features
• A-B Repeat Play
• Automatic Channel Setup
• Automatic Head Cleaner
• Automatic Tracking Adjustment
• Blue Background
• Closed Caption
• Daylight-Savings Time
• English or Spanish displays
• High Quality (HQ) System
• One-Touch Recording
• Real-Time Counter
• Remote Control or Front Panel menu access
• Repeat Play
• ShowGuard
TM
- Indefinite Timer
Recording memory
• Sleep Timer
• SmartClock
TM
• SmartLock
TM
• Special Effects: Forward and Reverse Searching; Still
• S-VHS Quasi Play Back (SQPB)
• Timer Recording
• Wake Up Timer
Safety Precautions
Warning: To prevent fire or shock hazard, do not expose this equipment to rain or moisture. Federal Communications Commission (FCC) Warning: Any unauthorized changes or modifications to this equipment void the user’s authority to operate it. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a partic­ular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
Philips Consumer Electronics recommends you use only video cassette tapes that have the mark. Other tapes may cause poor picture quality and excessive deposits on the video heads that the warranty may not cover if damage occurs. This TV/VCR has a High Quality (HQ) system and is compatible with exist­ing Video Home System (VHS) equipment. Note to the Cable TV System Installer: This reminder calls the Cable TV system installer’s attention to Article 820-40 of the National Electrical Code, which provides guidelines for proper grounding – in particular, speci­fying that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as possible.
Declaration of Conformity
Model Numbers: CCC130AT, CCC132AT, CCC190AT, and CCC192AT Trade Name: Philips Responsible Party: Philips Consumer Electronics
P.O. Box 14810 Knoxville, TN 37914-1810 (865) 521-4316
Welcome to your TV/VCR owner’s manual.
This manual describes four models: CCC130, CCC132, CCC190 and CCC192. The models may look different, but they operate exactly the same. The CCC130 is illustrated in this manual. The features described in this manual apply to all models unless otherwise specified.
As an ENERGY STAR®Partner, Philips Consumer Electronics has determined that this product meets the ENERGY STAR®guidelines for energy efficiency. E
NERGY STAR
®
is a U.S. registered mark. Using products with the ENERGY STAR®label can save energy. Saving energy reduces air pollution and
lowers utility bills.
SmartClock
TM
, SmartLockTM, and ShowGuardTMare trademarks of Philips Consumer Electronics. Copyright 2001 Philips Consumer Electronics. All rights reserved.
4 Table of Contents
Setting Up Your TV/VCR
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Before Using the TV/VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Hooking Up the TV/VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-7
Turning On the TV/VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Language Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Automatic Channel Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-11
Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12-17
Daylight-Savings Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Time Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Description of Controls
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Remote Control Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22-23
Adjusting the Picture Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24-25
On-Screen Status Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Reminder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Basic Operations
Playing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Recording Options
One-Touch Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Rerecording (Tape Duplication) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32-35
Defeat Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Playing Options
Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
A-B Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38-39
Real-Time Counter Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Playback Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Additional Features
SmartLock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42-45
Blue Background . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Wake Up Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Volume Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Closed Caption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50-51
Automatic Operation Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Information You May Need
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Helpful Hints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54-55
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Before Using the TV/VCR 5
Using the Remote Control
Point the remote control at the TV/VCR’s remote sensor.
Do not put objects between the remote control and the
TV/VCR.
TV/VCR Maintenance
In this TV/VCR, use only tapes with the mark.
Remove any light adhesive stick-on notes from the video cas-
sette tape before putting the tape in the TV/VCR. Removable labels can jam the TV/VCR.
The TV/VCR requires periodic maintenance to maintain its
excellent performance. This TV/VCR has an automatic head cleaning system. However, the video heads will eventually require cleaning or replacement. Only an authorized service center should perform this service.
Video cassette tapes have record tabs to ensure you do not erase recordings accidentally.
1
To prevent accidental recording, break off the tab with a screwdriver.
2
To record again, cover the hole with cellophane tape.
Recording Prevention
1
2
Battery Safety
Battery Usage CAUTION - To prevent battery leakage that
may result in bodily injury or damage to the unit: Install ALL batteries correctly, with the + and - markings on the battery aligned as indicated on the unit; Do not mix batteries, for example, old with new or carbon with alkaline; and Remove batteries when the unit will not be used for a long time.
Putting Batteries in the Remote Control
1
Remove the battery compartment lid on the bottom of the
remote control by pressing the tab, then lifting the lid.
2
Place two AA batteries inside the battery compartment
with their +and –ends aligned as indicated.
3
Replace the battery compartment lid.
1 2 3
• Your new product, its packaging, and this manual contain materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount of reusable materials and to mini­mize the amount that needs to be properly disposed. Your product uses batteries that should not be thrown away when depleted but should be disposed of as small chemical waste. Please find out about the local regula­tions on disposal of your old product, batteries, manual, and packaging when you replace existing equipment.
Helpful Hints
6 Hooking Up the TV/VCR
ANT.
ANT.
Hooking Up Your TV/VCR With a Cable Signal or Outdoor Antenna
ANT.
IN
OUT
ANT.
Connect an RF coaxial cable (75­ohm, not supplied) to the OUT Jack on the Cable Box and to the ANT(enna) Jack on the TV/VCR.
Connect a Cable signal or an antenna to the ANT(enna) Jack.
Hooking Up Your TV/VCR With a Cable Box
To view any channel, set the TV/VCR to the Cable Box output channel (channel 03 or 04). Then, select channels at the Cable Box.
1
Hook up your TV/VCR using one of the connections shown.
A.
B.
ANT.
ANT.
Rod Antenna
(not supplied)
Hooking Up Your TV/VCR With an Indoor Antenna
To install a rod antenna (not sup­plied), push the stem of the antenna into the antenna hole on the top of the TV/VCR. Connect the antenna wire to the ANT(enna) Jack on the back of the TV/VCR as shown. Extend the antenna and adjust its length, direction, and angle for the clearest picture.
C.
Connect the Cable signal to the IN Jack on the Cable Box.
RF coaxial cable
(not supplied)
CCC130
CCC130
CCC130
Hooking Up the TV/VCR (cont’d) 7
AUDIOVIDEO
STOP EJECT
REW PLAY F.FWD REC
OTR
CHANNEL
VOLUME
POWER
EARPHONE
OUT
IN
VIDEO
IN
OUT
3CH 4CH
AUDIO
ANT.
OUT
IN
VIDEO
IN
OUT
3CH
4CH
AUDIO
ANT.
VIDEOAUDIO
• Before connecting an antenna or cable signal to the ANT(enna) Jack, make sure the pin is not bent. If the pin is bent, straighten it as illustrated, then connect the antenna or cable signal to the ANT(enna) Jack.
• A rod antenna (not supplied) is available from Philips Service Solutions Group. The part number is 4835 303
37006. To order, call 1-800-851-8885. (This antenna will fit the CCC130 and CCC132 only.)
• Audio and video cables are not supplied.
Helpful Hints
Crooked Pin
Straight Pin
Bent pin
Plug
Cable
Hooking Up Your TV/VCR to Another Video Source (VCR or Camcorder)
You may need this connection if you want to copy tapes or view tapes that you are playing on the VCR or camcorder. Select channel 00 (A/V IN) at the TV/VCR when viewing tapes that are playing on the VCR or camcorder. Details are on page 31.
AUDIO/VIDEO In Jacks on front of TV/VCR
AUDIO/VIDEO OUT Jacks on VCR
Connect an Audio cable to the AUDIO OUT Jack on the VCR and to the AUDIO In Jack on the front of the TV/VCR.
Connect a Video cable to the VIDEO OUT Jack on the VCR and to the VIDEO In Jack on the front of the TV/VCR.
2
When all other connections are complete, plug in the TV/VCR’s power cord.
3
Before you turn on the TV/VCR, go to page eight.
D.
CCC130
8 Turning On the TV/VCR
Before you turn on the TV/VCR, make sure batteries are in the remote control and you have connected the TV/VCR correctly. The instructions on this page work only when you turn on the TV/VCR for the first time.
1
Press the POWER button. The TV/VCR will come on and the
screen shown below will appear.
2
Press the PLAY/K button or the STOP/L button to select English or Spanish on-screen displays and menus.
3
Press the MENU button. The screen shown below will appear.
4
Press the F.FWD/B button to begin automatic channel setup. The TV/VCR will memorize all available channels. When
channels are set, CHANNELS ARE SET will appear on the screen briefly. Then the TV/VCR will go to the lowest available channel. If you try to set up channels when there is no antenna or cable connected to the TV/VCR, programming will appear to take place, but eventually a NO TV SIGNALS ... message will appear on the screen. Connect an antenna or cable to the ANT(enna) jack on the TV/VCR, then press the F.FWD/B button again. You may need to follow the steps on page 10 instead.
CONNECT ANTENNA OR CABLE TO TVCR
THEN PRESS B
TO END PRESS EXIT
SELECT LANGUAGE
> ENGLISH ON
ESPAÑOL
SELECT KL OR PRESS MENU TO CONTINUE
5
Use the CH(annel) o/p buttons or the Number buttons on the remote control to select a TV/VCR channel. Use the VOL(ume) o/p buttons to adjust the sound.
When you scan channels with the CH(annel) o/p buttons, only the memorized channels will be available. Use the Number but­tons to select non-memorized channels.
• If you do not see any on-screen dis­plays when you turn on the TV/VCR, check your hookups, then try again. If you still do not see any on-screen displays, follow the steps on pages nine-10 to select a language and set up channels.
• To skip step 2, press the MENU but­ton. All on-screen displays will be in English. To skip step 4, press the STATUS/EXITbutton. Automatic Channel Setup will not occur, and CHANNELS NOT SET will appear on the screen briefly.
• You cannot set up channels if you are using a Cable Box.
• Line Input mode is channel 00. When you select channel 00, A/V IN will appear on the screen briefly. Press the CH(annel) o/p buttons or the Number buttons to select another channel.
Helpful Hints
1
3 5
2
4
EJECT
MENU
SLEEP/
WAKE UP
CH. VOL.
POWER
STATUS/EXIT
1 2 3
4 5 6
7 8 9
0
REC /OTR
PLAY
REW
F.FWD
STOP
MUTE
SPEED
MEMORY
TRACKING
CLEAR
ALT.CH
PAUSE
/STILL
Language Selection 9
Follow the steps below to change the language of the on-screen displays and menus.
3
Press the PLAY/button or the STOP/button to choose SELECT LANGUAGE. Then, press the F.FWD/B button.
4
Press the PLAY/button or the STOP/button to select ENGLISH or ESPAÑOL (Spanish).
5
Press the STATUS/EXIT button.
SELECT LANGUAGE
> ENGLISH ON
ESPAÑOL
SELECT KL TO END PRESS EXIT
1
Press the MENU button.
2
Press the PLAY/button or the STOP/button to select PRIM. SETUP. Then, press the F.FWD/B button.
PRIMARY SETUP
> SELECT LANGUAGE
AUTO PROGRAMMING CH MEMORY REVIEW VOLUME BAR [ON] SET CLOCK
SELECT KL CHOOSE B TO END PRESS EXIT
> PRIM. SETUP
VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS
PRESS B
2-4
• If you accidentally select Spanish and need English on-screen displays and menus:
1) Press the MENU button.
2) Press the PLAY/o button or the STOP/p button to select PREPARA­CION, then press the F.FWD/B button.
3) Press the PLAY/o button or the STOP/p button to select SELEC­CION IDIOMA, then press the F.FWD/B button.
4) Press the PLAY/o button or the STOP/p button to select ENGLISH.
5) Press the STATUS/EXIT button.
Helpful Hint
1
5
EJECT
MENU
SLEEP/
WAKE UP
CH. VOL.
POWER
STATUS/EXIT
1 2 3
4 5 6
7 8 9
0
REC
/OTR
PLAY
REW
F.FWD
STOP
MUTE
SPEED
MEMORY
TRACKING
CLEAR
ALT.CH
PAUSE
/STILL
10 Automatic Channel Setup
Although the TV/VCR may automatically memorize the channels you receive when you turn it on for the first time, you may set up channels again by following the steps below.
1
Press the MENU button.
2
Press the PLAY/button or the STOP/button to select PRIM. SETUP, then press the F.FWD/B button.
PRIMARY SETUP
> SELECT LANGUAGE
AUTO PROGRAMMING CH MEMORY REVIEW VOLUME BAR [ON] SET CLOCK
SELECT KL CHOOSE B TO END PRESS EXIT
3
Press the PLAY/button or the STOP/button to select AUTO PROGRAMMING, then press the F.FWD/B button.
AUTO CH PROGRAMMING ... will appear on the screen. The TV/VCR distinguishes between TV channels and cable channels auto­matically, and the TV/VCR will memorize its available channels.
• Line Input mode will always be channel 00. You cannot delete it.
• You can not select AUTO PRO­GRAMMING at step 3 if you are in Line Input mode.
Helpful Hints
4
Wait for a few minutes. When setup is complete, CHANNELS
ARE SET will appear on the screen. Then the programming of the lowest channel number will appear on the screen. Now, when you press the CH(annel) o/p buttons, you will scan only through channels you receive. You can still select non-memorized channels using the Number buttons.
4
Wait for the TV/VCR to set up channels.
1
2-3
> PRIM. SETUP
VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS
PRESS B
EJECT
MENU
SLEEP/
WAKE UP
CH. VOL.
POWER
STATUS/EXIT
1 2 3
4 5 6
7 8 9
0
REC /OTR
PLAY
REW
F.FWD
STOP
MUTE
SPEED
MEMORY
TRACKING
CLEAR
ALT.CH
PAUSE
/STILL
Automatic Channel Setup (cont’d) 11
4
Press the F.FWD/B button or the REW(ind)/{ button to select SAVED (to add that channel) or DELETED (to delete that channel).
Repeat steps 3-4 to add or delete other channels.
5
Press the STATUS/EXIT button.
Programming of the channel you added or deleted will appear.
3
Press the CH(annel) o/p buttons or the Number buttons to select the channel you want to add or delete.
• To review the memorized channels, follow these steps.
1) Press the MENU button.
2) Press the PLAY/button or the STOP/button to select PRIM. SETUP. Press the F.FWD/B button.
3) Press the PLAY/button or the STOP/button to select CH MEMORY REVIEW. Press the F.FWD/B button. A list of programmed channels will appear on the screen.
4) If all the programmed channels don’t fit on the screen, press the F.FWD/B button. If you do not press the F.FWD/B button within 10 seconds, the remaining channels will appear on the screen. (If there are no remaining channels, the previous menu will appear.) Or press the REW(ind)/{ button to see the previous screen of channels.
5) Press the STATUS/EXIT button once or twice.
Helpful Hint
1
Press the MENU button.
2
Press the PLAY/o button or the STOP/p button to select CHANNEL.
TO ADJUST PRESS { / B CH23
> CHANNEL
SMARTLOCK REVIEW EXIT PRIM. SETUP VCR PROGRAM
SAVED
TO ADJUST PRESS { / B CH123
> CHANNEL
SMARTLOCK REVIEW EXIT PRIM. SETUP VCR PROGRAM
SAVED
1
2,4
3
5
Adding/Deleting Channels
If your channel lineup changes, you may want to add newly avail­able channels or remove channels that are no longer available in your area. You can use the CH(annel) o/p buttons to scroll through only the available channels. To add or delete channels from the TV/VCR’s memory, follow these steps.
> PRIM. SETUP
VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS
PRESS B
EJECT
MENU
SLEEP/
WAKE UP
CH. VOL.
POWER
STATUS/EXIT
1 2 3
4 5 6
7 8 9
0
REC
/OTR
PLAY
REW
F.FWD
STOP
MUTE
SPEED
MEMORY
TRACKING
CLEAR
ALT.CH
PAUSE
/STILL
12 Setting the Clock
• Entries that do not match the TV/VCR’s calendar will cause a question mark (?) to appear on the screen.
• To make corrections while you are setting the clock, press the CLEAR button until the space for the num­ber you want to correct is flashing. Then enter the correct number.
Helpful Hints
There are three ways to set the clock: Manually, with Automatic PBS Channel Selection, or with Manual PBS Channel Selection. With manual clock setting, you tell the TV/VCR the current time. With Automatic or Manual PBS Channel Selection, the TV/VCR gets the time from your local PBS station. If you use either Manual PBS Channel Selection or Automatic PBS Channel Selection, follow the steps on page 19 to have the TV/VCR maintain the clock according to your Time Zone.
Cable Box users must set the clock manually.
To set the clock manually, follow the steps on pages 12-13. To set the clock using Automatic PBS Channel Selection, follow the steps on pages 14-15. To set the clock using Manual PBS Channel Selection, follow the steps on pages 16-17. Before you begin, make sure:
You have connected and turned on the TV/VCR. Details are on
pages six-eight.
Channels are set. Details are on page 10.
You make each entry within 60 seconds of the previous entry.
Manual Clock Setting
1
Press the MENU button.
2
Press the PLAY/button or the STOP/button to select PRIM. SETUP. Then, press the F.FWD/B button.
PRIMARY SETUP
> SELECT LANGUAGE
AUTO PROGRAMMING CH MEMORY REVIEW VOLUME BAR [ON] SET CLOCK
SELECT KL CHOOSE B TO END PRESS EXIT
> PRIM. SETUP
VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS
PRESS B
SET CLOCK
> AUTO CLOCK [ON]
SET MANUAL CLOCK DAYLIGHT SVG.TIME [ON] SET TIME ZONE
[AUTO]
TO CONTINUE PRESS MENU SELECT KL CHOOSE B
TO END PRESS EXIT
3
Press the PLAY/button or the STOP/button to select SET CLOCK. Then, press the F.FWD/B button.
2-3
1
EJECT
MENU
SLEEP/
WAKE UP
CH. VOL.
POWER
STATUS/EXIT
1 2 3
4 5 6
7 8 9
0
REC /OTR
PLAY
REW
F.FWD
STOP
MUTE
CLEAR
ALT.CH
PAUSE
/STILL
SPEED
MEMORY
TRACKING
Setting the Clock (cont’d) 13
5
Press two Number buttons for the hour(s) and two Number buttons for the minute(s). Then press 1 for AM or 2 for PM. For example, for 9:30 PM, press 09, 30, 2.
SET MANUAL CLOCK
TIME 09 : 30 PM
MONTH – – / – – / – – – –
TO CORRECT PRESS CLEAR TO END PRESS EXIT
6
Press two Number buttons for the month, two Number buttons for the day, and two Number buttons for the year. For example, for July 1, 2001, press 07, 01, 01. The day of
the week will appear automatically.
7
Press the STATUS/EXIT button.
SET MANUAL CLOCK
TIME 09 : 30 PM DATE 07 / 01 / 2001
SUNDAY
TO CORRECT PRESS CLEAR TO END PRESS EXIT
4
Press the PLAY/o button or the STOP/p button to select SET MANUAL CLOCK, then press the F.FWD/B button.
SET MANUAL CLOCK
TIME – – : – – DATE – – / – – / – – – –
TO END PRESS EXIT
5-67
4
EJECT
MENU
SLEEP/
WAKE UP
CH. VOL.
POWER
STATUS/EXIT
1 2 3
4 5 6
7 8 9
0
REC /OTR
PLAY
REW
F.FWD
STOP
MUTE
SPEED
MEMORY
TRACKING
CLEAR
ALT.CH
PAUSE
/STILL
14 Setting the Clock (cont’d)
Automatic PBS Channel Selection
4
If ON appears beside AUTO CLOCK, press the MENU button. If OFF appears beside AUTO CLOCK, press the PLAY/o button or the STOP/p button to select AUTO CLOCK, then press the F.FWD/B button so that ON appears to the right of AUTO CLOCK. Then, press the MENU button.
1
Press the MENU button.
2
Press the PLAY/button or the STOP/button to select PRIM. SETUP. Then, press the F.FWD/B button.
PRIMARY SETUP
> SELECT LANGUAGE
AUTO PROGRAMMING CH MEMORY REVIEW VOLUME BAR [ON] SET CLOCK
SELECT KL CHOOSE B TO END PRESS EXIT
3
Press the PLAY/button or the STOP/button to select SET CLOCK. Then, press the F.FWD/B button.
2-4
AUTO CLOCK AUTO CLOCK USES PBS CHANNEL DATA
> SET PBS CH. AUTO
SET PBS CH. MANUAL
SELECT KL CHOOSE B TO END PRESS EXIT
> PRIM. SETUP
VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS
PRESS B
1
4
SET CLOCK
> AUTO CLOCK [ON]
SET MANUAL CLOCK DAYLIGHT SVG.TIME [ON] SET TIME ZONE
[AUTO]
TO CONTINUE PRESS MENU SELECT KL CHOOSE B
TO END PRESS EXIT
EJECT
MENU
SLEEP/
WAKE UP
CH. VOL.
POWER
STATUS/EXIT
1 2 3
4 5 6
7 8 9
0
REC
/OTR
PLAY
REW
F.FWD
STOP
MUTE
SPEED
MEMORY
TRACKING
CLEAR
ALT.CH
PAUSE
/STILL
Setting the Clock (cont’d) 15
7
When the TV/VCR finds the PBS channel, the time will appear on the screen. Press the STATUS/EXIT button.
6
NOW SEARCHING flashes on the TV/VCR screen.
If CANNOT FIND CLOCK DATA flashes on the TV/VCR
screen, you will be prompted to turn off the TV/VCR. Turn off the TV/VCR. Leave it off for several minutes. When
you turn on the TV/VCR again, the clock will be set.
• To display the time on the TV/VCR screen, press the STATUS/EXIT but­ton. Details are on page 26.
• You cannot use the AUTO CLOCK feature if you don’t receive a PBS channel that carries a time signal in your area. Set the clock manually.
Helpful Hints
5
Press the PLAY/button or the STOP/button to select SET PBS CH. AUTO. Then, press the F.FWD/B button.
SET AUTO CLOCK
TIME – – : – – DATE – – / – – / – – – – NOW SEARCHING
TO END PRESS EXIT
SET AUTO CLOCK
TIME 06 : 30 PM DATE 07 / 01 / 2001
SUNDAY
TO END PRESS EXIT
SET AUTO CLOCK
TIME – – : – – DATE – – / – – / – – – –
CANNOT FIND CLOCK DATA TO END PRESS EXIT
6
Wait for the TV/VCR to find the time.
7
5
EJECT
MENU
SLEEP/
WAKE UP
CH. VOL.
POWER
STATUS/EXIT
1 2 3
4 5 6
7 8 9
0
REC /OTR
PLAY
REW
F.FWD
STOP
MUTE
SPEED
MEMORY
TRACKING
CLEAR
ALT.CH
PAUSE
/STILL
16 Setting the Clock (cont’d)
Manual PBS Channel Selection
4
If ON appears beside AUTO CLOCK, press the MENU button. If OFF appears beside AUTO CLOCK, press the PLAY/o button or the STOP/p button to select AUTO CLOCK, then press the F.FWD/B button so that ON appears to the right of AUTO CLOCK. Then, press the MENU button.
1
Press the MENU button.
2
Press the PLAY/button or the STOP/button to select PRIM. SETUP. Then, press the F.FWD/B button.
PRIMARY SETUP
> SELECT LANGUAGE
AUTO PROGRAMMING CH MEMORY REVIEW VOLUME BAR [ON] SET CLOCK
SELECT KL CHOOSE B TO END PRESS EXIT
AUTO CLOCK AUTO CLOCK USES PBS CHANNEL DATA
> SET PBS CH. AUTO
SET PBS CH. MANUAL
SELECT KL CHOOSE B TO END PRESS EXIT
> PRIM. SETUP
VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS
PRESS B
3
Press the PLAY/button or the STOP/button to select SET CLOCK. Then, press the F.FWD/B button.
2-41
4
SET CLOCK
> AUTO CLOCK [ON]
SET MANUAL CLOCK DAYLIGHT SVG.TIME [ON] SET TIME ZONE
[AUTO]
TO CONTINUE PRESS MENU SELECT KL CHOOSE B
TO END PRESS EXIT
EJECT
MENU
POWER
STATUS/EXIT
CLEAR
1 2 3
4 5 6
7 8 9
SLEEP/
WAKE UP
REC
/OTR
REW
CH. VOL.
TRACKING
0
PLAY
STOP
MUTE
SPEED
MEMORY
F.FWD
ALT.CH
PAUSE
/STILL
Setting the Clock (cont’d) 17
8
When the TV/VCR finds the clock data, the time will appear on the screen. Press the STATUS/EXIT button.
6
Use the Number buttons to select your PBS station.
If CANNOT FIND CLOCK DATA flashes on the
TV/VCR screen and you know another PBS channel, press the PLAY/button or the STOP/button to choose SELECT NEW PBS CH. Then, press the F.FWD/B button. Repeat step 6.
If CANNOT FIND CLOCK DATA flashes on the
TV/VCR screen and you do not know another channel, press the PLAY/button or the STOP/button to select SET PBS CH. AUTO. Then, press the F.FWD/B button. The TV/VCR will search for the PBS channel automati-
cally.
• If the TV/VCR finds the PBS channel, the time will appear on the screen.
• If the TV/VCR does not find the PBS channel, you will be prompted to turn off the TV/VCR. Leave it off for several min­utes. When you turn on the TV/VCR again, the time will be set.
AUTO CLOCK (PBS) CH 02
TIME – – : – – DATE – – / – – / – – – –
SELECT CHANNEL NUMBER TO END PRESS EXIT
AUTO CLOCK (PBS) CH 12
TIME 06 : 30 PM DATE 07 / 01 / 2001
SUNDAY
TO END PRESS EXIT
7
NOW SEARCHING flashes on the TV/VCR screen.
AUTO CLOCK (PBS) CH 12
TIME – – : – – DATE – – / – – / – – – – NOW SEARCHING
TO END PRESS EXIT
7
• If you have an Antenna hookup, you may select channels 2-69 at step 6. If you have a cable connection, you may select channels 1-125 at step
6. Details about available memo­rized channels are on page 11.
• To display the time on the TV/VCR screen, press the STATUS/EXIT but­ton. Details are on page 26.
Helpful Hints
Wait for the TV/VCR to find the time.
5
Press the PLAY/button or the STOP/button to select SET PBS CH. MANUAL. Then, press the F.FWD/B button.
6
5
8
EJECT
MENU
SLEEP/
WAKE UP
CH. VOL.
POWER
STATUS/EXIT
1 2 3
4 5 6
7 8 9
REC /OTR
TRACKING
REW
0
PLAY
STOP
MUTE
SPEED
MEMORY
F.FWD
CLEAR
ALT.CH
PAUSE
/STILL
18 Daylight-Savings Time
4
Press the PLAY/button or the STOP/button to select DAYLIGHT SVG.TIME. Then, press the F.FWD/B button so that ON or OFF appears beside DAYLIGHT SVG. TIME (Daylight Savings Time).
5
Press the STATUS/EXIT button.
1
Press the MENU button.
2
Press the PLAY/button or the STOP/button to select PRIM. SETUP. Then, press the F.FWD/B button.
PRIMARY SETUP
> SELECT LANGUAGE
AUTO PROGRAMMING CH MEMORY REVIEW VOLUME BAR [ON] SET CLOCK
SELECT KL CHOOSE B TO END PRESS EXIT
3
Press the PLAY/button or the STOP/button to select SET CLOCK. Then, press the F.FWD/B button.
When the Daylight-Savings Time feature is ON, the TV/VCR clock will automatically move forward one hour on the first Sunday in April and move back one hour on the last Sunday in October. To turn Daylight-Savings Time ON or OFF, follow the steps below.
> PRIM. SETUP
VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS
PRESS B
2-4
1
5
SET CLOCK
> AUTO CLOCK [ON]
SET MANUAL CLOCK DAYLIGHT SVG.TIME [ON] SET TIME ZONE
[AUTO]
TO CONTINUE PRESS MENU SELECT KL CHOOSE B
TO END PRESS EXIT
EJECT
MENU
POWER
STATUS/EXIT
CLEAR
1 2 3
4 5 6
7 8 9
SLEEP/
WAKE UP
REC /OTR
REW
CH. VOL.
TRACKING
0
PLAY
STOP
MUTE
SPEED
MEMORY
F.FWD
ALT.CH
PAUSE
/STILL
Loading...
+ 42 hidden pages