Philips CAW7740N/00, CAW7740N/05 Firmware Upgrade Instruction

How to upgrade the CAW7740N Wireless Base Station firmware
The last CAW7740N/00 and CAW7740N/05 firmware which can
be downloaded from Philips website is: V 0.00.14
This How-to manual will answer the following questions:
1. Why should I upgrade my CAW7740N firmware?
2. How do I know which firmware version I have in my CAW7740N?
3. How do I know what the latest firmware is?
4. How do I upgrade to the latest firmware?
5. Your CAW7740N Wireless Base Station firmware is now upgraded.
Page 1 of 6
How to upgrade the CAW7740N Wireless Base Station firmware

1. Why should I upgrade my CAW7740N firmware?

• To add new functionality or to fixes some issues.

Issues Problems fixed:

1. MTU Value can not be set via UCP protocol ( CD install ).

2. How do I know which firmware version I have in my CAW7740N?

Make sure your PC is connected to your Wireless Base Station (either by Wi-FI or by Ethernet)

2.1 Determine the IP address of your CAW7740N Wireless Base Station.

Click on your PC Start => Run
The Default Gateway shows the IP address of the Wireless Base Station .
Type cmd and click OK. type ipconfig followed by Enter.
Page 2 of 6
Loading...
+ 4 hidden pages