Philips BYC10-600 Datasheet
Philips Semiconductors Product specification
Rectifier diode BYC10-600
ultrafast, low switching loss
FEATURES SYMBOL QUICK REFERENCE DATA
• Extremely fast switching VR = 600 V
• Low reverse recovery current
• Low thermal resistance VF ≤ 1.8 V
• Reduces switching losses in
associated MOSFET I
APPLICATIONS PINNING SOD59 (TO220AC)
k a
12
trr = 19 ns (typ)
F(AV)
= 10 A
• Active power factor correction PIN DESCRIPTION
• Half-bridge lighting ballasts
tab
• Half-bridge/ full-bridge switched 1 cathode
mode power supplies.
2 anode
The BYC10-600 is supplied in the
SOD59 (TO220AC) conventional tab cathode
leaded package.
1
2
LIMITING VALUES
Limiting values in accordance with the Absolute Maximum System (IEC 134).
SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT
V
V
V
I
F(AV)
I
FRM
I
FSM
T
T
RRM
RWM
R
stg
j
Peak repetitive reverse voltage - 600 V
Crest working reverse voltage - 600 V
Continuous reverse voltage Tmb ≤ 114 ˚C - 500 V
Average forward current δ = 0.5; with reapplied V
Tmb ≤ 78 ˚C
Repetitive peak forward current δ = 0.5; with reapplied V
Tmb ≤ 78 ˚C
1
1
; - 10 A
RRM(max)
; - 20 A
RRM(max)
Non-repetitive peak forward t = 10 ms - 65 A
current. t = 8.3 ms - 71 A
sinusoidal; Tj = 150˚C prior to surge
Storage temperature -40 150 ˚C
with reapplied V
RWM(max)
Operating junction temperature - 150 ˚C
THERMAL RESISTANCES
SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT
R
th j-mb
R
th j-a
September 1998 1 Rev 1.100
Thermal resistance junction to - - 2 K/W
mounting base
Thermal resistance junction to in free air. - 60 - K/W
ambient
Philips Semiconductors Product specification
Rectifier diode BYC10-600
ultrafast, low switching loss
ELECTRICAL CHARACTERISTICS
Tj = 25 ˚C unless otherwise stated
SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT
V
F
I
R
t
rr
t
rr
I
rrm
V
fr
Forward voltage IF = 10 A; Tj = 150˚C - 1.4 1.8 V
IF = 20 A; Tj = 150˚C - 1.7 2.3 V
IF = 10 A; - 2.0 2.8 V
Reverse current VR = 600 V - 9 200 µA
VR = 500 V; Tj = 100 ˚C - 1.1 3.0 mA
Reverse recovery time IF = 10 A to VR = 400 V; - 19 - ns
dIF/dt = 500 A/µs
Reverse recovery time IF = 10 A to VR = 400 V; - 32 40 ns
dIF/dt = 500 A/µs; Tj = 125˚C
Peak reverse recovery current IF = 10 A to VR = 400 V; - 9.5 12 A
dIF/dt = 500 A/µs; Tj = 125˚C
Forward recovery voltage IF = 10 A; dIF/dt = 100 A/µs-811V
IL
Vin
150 uH
typ
500 V MOSFET
ID
Vo = 400 V d.c.
OUTPUT DIODE
Fig.1. Typical application, output rectifier in boost
converter power factor correction circuit. Continuous
conduction, mode where the transistor turns on whilst
forward current is still flowing in the diode.
Vin = 400 V d.c.
Vin
IFIR
inductive load
IL
Fig.2. Typical application, freewheeling diode in half
bridge converter. Continuous conduction mode, where
each transistor turns on whilst forward current is still
flowing in the other bridge leg diode.
September 1998 2 Rev 1.100
Loading...