Philips burton SUPER EXAM 50 LED Instructions For Use & Maintenance

ill

(

( t

,

\

®

SUPER EXAM 50

LED

FloorStand, Table, Rail, Wall&Ceiling Versions

Instructions for Use&Maintenance

PHILIPS

burton

I III

SESOLED Models

VOLTAGE

MOUNT

MODEL NUMBER PLUG STYLE RANGE

SE50LFL

NEMA 5-15

FLOOR

SE50LFL02

BS1363
SE50LFL25 SCHUKO
SE50LT

NEMA 5-15

TABLE

SE50LT02 BS1363
SE50LT25 SCHUKO
SE50LR NEMA 5-15
SE50LRl NEMA 5-15

RAIL'

SE50LR02 BS1363

100V-240V

SE50LR102 BS1363
SE50LR25 SCHUKO
SE50LR125 SCHUKO
SE50LW NEMA 5-15

WALL

SE50LW02

BS1363
SE50LW25

SCHUKO
SE50LSC NEMA 5-15

CEILING

SE50LSC02 BS1363
SE50LSC25

SCHUKO

*RAIL has two different mounting brackets;

R= Fairfield rail style

Rl=

DIN 25mm rail style

5000249

A04 Instructions for Use SE50 LED

2

Introduction

Congratulations on your purchase of the SE50 LED Light!

This instructions manual will provide information to install your new light. It also pro-
vides technical information about the light and instructions on
operation, maintenance, and cleaning.

Please read these instructions carefully and follow the safety instructions and require-
ments. In particular, note that this product has a spring-loaded arm.

If there are any particular problems that have not been treated in sufficient detail in this
manual, for your own safety please contact your supplier or Philips Burton before pro-
ceeding.

This manual contains guidance on how to use&maintain the SE50 LED light.

Philips Burton is a leading manufacturer of medical lighting. The product lines encom-

pass lights for examination, procedure, minor surgery, and major surgery applications.

You are welcome to find out more on our web site at www.burtonmedical.com.

This product is distributed by:

Philips Burton

21I00 Lassen Street

Chatsworth, CA 91311

USA

Tel. [phone]

[phone]

Fax [phone]

[phone]

www.burtonmedical.com

3

"

4

Table of Contents

Technical Description 6

Safety 7
Diagrams 9

Models 9

Wall Plate Mounting Pattern 10
Floor Base Assembly 10

Ceiling Plate Mounting Pattern 11
Ceiling Height. 11
Ceiling Assembly 12

1. Set-Up and Operation 13

1.1 Pre-Assembly 13

1.2 Wall or Table Models 14

1.3 Floorstand Models 15

1.4 Ceiling Models 15

1.5 "Normal" Operating Conditions 16

2. Maintenance 16

2.1 LED Replacement... 16

2.2 Cleaning 16

2.3 Fuse Replacement. 16

2.4 Replacement Parts 16

2.5 Preventive Maintenance 17

3. Symbols and Warnings 17

3.1 Symbol Explanations 17

3.2 Warnings and Cautionary Notices 18

Troubleshooting Guide 18

Warranty 19

Philips Burton Information 20

5

11

Specifications

General

The SESO LED is intended for use as a task and examination light. It is available in
floor, table, rail, wall, and ceiling mounts.

This unit has been tested and classified to IEC 60601-1 and IEC 60601-2-41. The ex-

posed metal parts are not grounded, nor do they have to be, since the metal parts are
adequately isolated from the high voltage supply.

Power to the fixture is controlled from an electronic power supply at the base of the
arm, which contains internal fuses. Effective working distance between patient and
lighthead is from 18 inches (46 cm) to 39 inches (1 meter). A 39-inch (1 meter), two-
section movable arm provides positioning freedom.

Philips Burton will make available to the purchaser or his representative technical mate-
rial, including circuit diagrams, parts lists, and component descriptions, which will assist

the user's qualified personnel in repairing those parts of this equipment designated by

Philips Burton as repairable.

Technical Description

The SESO LED is a general-purpose, high-intensity examination light specifically de-

signed for use in the clinic or hospital setting. Its design offers excellent illumination and
color rendition, large field size, and convenient positioning.

SESO LED has a unique set of LEDs that gives the user a fixture that projects a tight,
homogeneous beam of light with high intensity to serve the needs of a demanding
market. Due to the low wattage, the light can be in continuous use for hours without

causing discomfort to physician or patient.

The mounting system allows the SESO LED light head to swing through a radius arc of
approximately 42 inches, and project a beam on any location of a human subject. Be-
cause the fixture is lightweight (6 pounds for the head/arm), the supporting arms can be
constructed from lightweight materials.

Options for installing the light include the following mounts: table, rail, wall, ceiling, and
floor. Floor stand models incorporate a S-caster base. Rail mounts clamp to existing
rails on bed or wall.

Power is supplied through a grounded 11-foot cord, having either a NEMA
5-15 hospital-grade North American plug, a British BS1363 or a European Schuko
(CEE 7/7) plug. A switch on the head controls power to the bulb. The SESO LED con-
forms to the strict standards of IEC 60601-1 and IEC 60601-2-41.

6