Quick Start Guide
1
Quick Start Guide
BTM177
What’s in the Box?
You should find these items upon opening the box.
User Manual
Quick Start Guide
FM antenna
User manual
Remote Control
Step A
Step B
2
CR2025
Pull out the insulation
plastic sheet.
Setup
Enjoy
Step A
Setup
Connection
1
For radio reception, connect the supplied FM antenna to the
FM ANTENNA terminal.
2
Connect the speaker wires to the SPEAKERS terminals.
3
Connect the power cord of the system to the AC power outlet.
Tips:
– See the User Manual for
how to connect other
equipment to this system.
– Use the supplied AC power
adaptor only! Using any other
power connection device may
damage your main set!
FM wire antenna
Speaker
(right)
1
2
3
Setting the clock
In standby mode, press DISPLAY/CLOCK.
1
Press ALBUM/PRESET +/- to select between 12 hour and 24 hour display.
2
Press DISPLAY/CLOCK again to confirm.
3
Power adaptor
Speaker
(left)
29
4
Press ALBUM/PRESET +/- to select the hour.
Press DISPLAY/CLOCK to confirm.
5
Repeat steps 4-5 to set minute.
6
Step B
Enjoy
Playing a disc
1
Select CD source.
2
Press OPEN/CLOSE on the top of the system to open the CD door.
Insert a disc with the printed side facing up and press down
3
on OPEN/CLOSE to close the CD door.
4
PressÉÅto start playback.
5
Press 9 to stop playback.
Programming and tuning to radio stations
Select FM source.
1
Press PROG on the remote control for more than two seconds to program all available stations
2
in order of waveband.
Pressí/
3
displayed
Tip:
Detailed playback features and
additional functions are described in
the accompanied owner's manual.
ëon the set (ALBUM/PRESET +/- on the remote control ) until the desired preset station is
Notes for the remote control:
– First, select the source you wish to
control by pressing one of the source select
keys on the remote control (CDor AUX, for
example).
– Then select the desired function ( 2;,
í, ë for example).
Step B
Playing a USB mass storage device
Make sure that your BTM177 is being powered on.
1
2
Press SOURCE repeatedly (or USB on the remote) to enter USB mode.
The LCD display shows USB.
3
Plug a compatible USB mass storage device to BTM177’s USB port marked .
If needed, use a suitable USB cable to connect between the device and BTM177’s USB port.
The device will automatically power on.
4
PressÉÅon your BTM177 to start playback.
5
Press 9 to stop playback.
Enjoy
Tip:
Refer to the user manual supplied for
the description about compatibility of
USB mass storage device, and
playability of the files stored on the
USB device.
Operating a Bluetooth-enabled device via the system
Place a Bluetooth-enabled device for pairing within 10 meters from the system.
1
Press SOURCE on the top of the system (or BLUETOOTH on the remote control) to select the
2
Bluetooth source.
3
Press and hold PAIRING on the top of the system or the remote control for more than 3
seconds.
Set the Bluetooth-enabled device to search for other available Bluetooth devices until it recognizes “PHILIPS
4
BTM177”.
Select “PHILIPS BTM177” and wait until you hear a double beep from the system and the Bluetooth icon
5
turns on.
➜ Enter “0000” when prompted for a keyword.
For a paired HFP and/or HSP mobile phone, you can receive, reject or hold a call via the system with the
6
PAIRING , and 9 buttons respectively.
● For a paired A2DP device, you can enjoy music from it with the ÉÅ, ¡ / ™, S/T and 9 buttons
via the system.
C Royal Philips Electronics N.V. 2008
All rights reserved.
http://www.philips.com PDCC-JW-0809
Loading...