Philips BTB8000 User Manual

User manual
Register your product and get support at
www.philips.com/support
Contents
1 Important 2
Safety 2 Notice 3 Declaration of conformity 3
2 Your Micro Music System 4
Introduction 4 What's in the box 5 Overview of the main unit 6 Overview of the remote control 7
3 Get started 9
Connect speakers 9 Connect the radio antenna 9 Connect power 10 Prepare the remote control 10 Power on 10 Set the clock 10
4 Play 11
Play from disc 11 Play from USB 11 Control play 12 Skip tracks 12 Program tracks 12 Play from Bluetooth-enabled
devices 13
7 Other features 17
Set the alarm timer 17 Set the sleep timer 17 Listen to an external device 17 Charge your devices 18
8 Product information 19
USB playability information 19 Supported MP3 disc formats 20
9 Trouble shooting 20
5 Listen to the radio 14
Listen to DAB+ radio 14 Listen to FM radio 15
6 Adjust sound 16
Adjust volume level 16 Mute sound 16
1EN

1 Important

Safety

This ‘bolt of lightning’ indicates uninsulated material within the device may cause an electrical shock. For the safety of everyone in your household, please do not remove the covering. The ‘exclamation mark’ calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems. WARNING: To reduce the risk of re or electric shock, the device should not be exposed to rain or moisture and objects lled with liquids, such as vases, should not be placed on the device. CAUTION: To prevent electric shock, fully insert the plug. (For regions with polarized plugs: To prevent electric shock, match wide blade to wide slot.)
Warning
Never remove the casing of this apparatus.
• Never lubricate any part of this apparatus.
• Never look into the laser beam inside this
apparatus.
• Never place this apparatus on other
electrical equipment.
• Keep this apparatus away from direct
sunlight, naked ames or heat.
• Ensure that you always have easy access
to the power cord, plug or adaptor to disconnect the apparatus from the power.
The device shall not be exposed to dripping or splashing.
Do no place any source of danger on the device (e.g. liquid lled objects. lit candles).
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
Make sure that there is enough free space around the product for ventilation.
Battery usage CAUTION - To prevent battery leakage which may result in bodily injury, property damage, or damage to the unit:
Install all batteries correctly, +
and - as marked on the unit.
Batteries (packed or installed)
shall not be exposed to excessive heat such as sunshine, re or the like.
Remove batteries when the unit
is not used for a long time.
Only use attachments/accessories specied by the manufacturer.
Hearing safety
Caution
To avoid hearing damage, limit the time
you use the headphones at high volume and set the volume to a safe level. The louder the volume, the shorter is the safe listening time.
Be sure to observe the following guidelines when using your headphones.
Listen at reasonable volumes for reasonable periods of time.
Be careful not to adjust the volume as your hearing adapts.
Do not turn up the volume so high that you can’t hear what’s around you.
2 EN
You should use caution or temporarily discontinue use in potentially hazardous situations.
Excessive sound pressure from earphones and headphones can cause hearing loss.

Notice

Any changes or modications made to this device that are not expressly approved by Gibson Innovations may void the user’s authority to operate the equipment.

Declaration of conformity

Hereby, Gibson Innovations declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. You can nd the Declaration of Conformity on www.philips.com/support.
Disposal of your old product and battery
Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
This symbol on a product means that the product is covered by European Directive 2012/19/EU.
This symbol means that the product contains batteries covered by European Directive 2013/56/EU which cannot be disposed of with normal household waste. Inform yourself about the local separate collection system for electrical and electronic products and batteries. Follow local rules and never dispose of the product and batteries with normal household waste. Correct disposal of old products and batteries helps prevent negative consequences for the environment and human health.
Removing the disposable batteries
To remove the disposable batteries, see battery installation section.
Environmental information
All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Gibson Innovations Limited is under license. Other trademarks and trade names are those of their respective owners.
3EN
This apparatus includes this label:
2 Your Micro Music
System
Note
The type plate is located on the back of the
device.
Congratulations on your purchase, and welcome to Philips! To fully benet from the support that Philips oers, register your product at www.philips.com/support.

Introduction

With this unit, you can:
enjoy audio from discs, USB devices, Bluetooth devices, and other external devices;
listen to FM and and Digital Audio Broadcasting+ (DAB+) radio
The unit supports these media formats:
About VU meters:
The VU meters show the input signal of the music source. VU meters work in two dierent modes:
VU Auto On (default): the VU meters indicate the music signal in dierent range automatically according to the signal input level. The corresponding range indicator (i.e. -30dB, -20dB and -10dB) will be lighted up if the overall signal below -20dB.
VU Auto O: to monitor if the input signal is appropriate. In normal cases, it is suggested to adjust the music source input level (if available on your device) between -20dB to 0dB in order to get better sound quality.
4 EN

What's in the box

Check and identify the contents of your package:
Main unit
2 x speakers
1 x AC power cord
1 x radio antenna
Remote control (with two AAA
battery)
Printed materials
5EN

Overview of the main unit

FM/DAB AERIAL
(75 )
1
2
3
4
5
6
7
8
R
L
SPEAKER OUT (4 )
AC MAINS ~
18
17
16
15
14
13
12
11
10
9
a
Switch this product on or to standby.
b IR sensor c Display panel
Show current status.
d
Adjust the bass level.
e
Adjust the trebel level.
f
Headphone socket.
6 EN
g
Connect external audio devices.
h
Connect USB storage devices.
i
Press to select a source: DISC, USB, FM, DAB+, AUDIO IN, BT.
In Bluetooth mode, press and hold for 2 seconds to disconnect the currently connected device and enter pairing mode.
j Disc compartment
k
Open or close the disc compartment.
l Volume knob
Adjust volume
m
Start or pause play.
Stop play.
Erase a program.
/
Skip to previous/next track.
Search within a track/disc.
Tune to a radio station.
Adjust time.
Select a DAB+ station.
n VU meters
Show the input signal of the music source.
o
Connect to the supplied radio antenna.
p
Connect with the speakers.
q r MiroMirco Micro USB socket for DAB upgrade
(for use by the service center only)
socket

Overview of the remote control

1
2
3
4
5
6
7
9
10
11
12
20
19
18
17
16
158
14
13
a
Switch this product on or to standby.
b
Select Bluetooth source
In Bluetooth mode, press and
hold for 2 seconds to disconnect the currently connected device and enter pairing mode.
7EN
Loading...
+ 16 hidden pages