Page 1
Always there to help you
Register your product and get support at
www.philips.com/support
Question?
Question?
Contact
Contact
Philips
Philips
Short User Manual
BT3000
1 Important
Warning
• Never remove the casing of this speaker.
• Never lubricate any part of this speaker.
• Never place this speaker on other electrical equipment.
• Keep this speaker away from direct sunlight, naked ames or heat.
• Make sure that you always have easy access to the power cord, plug, or
adaptor to disconnect the speaker from the power.
• Make sure that there is enough free space around the speaker
for ventilation.
• Only use attachments/accessories specied by the manufacturer.
• Battery usage CAUTION – To prevent battery leakage which
may result in bodily injury, property damage, or damage to the
speaker:
• Install the batteries correctly, + and - as marked on the
speaker.
• Do not mix batteries (old and new or carbon and alkaline,
etc.).
• Remove the batteries when the speaker is not used for a
long time.
• The batteries shall not be exposed to excessive heat such
• Use only power supplies listed in the user manual.
• The speaker shall not be exposed to dripping or splashing.
• Do not place any sources of danger on the speaker (e.g. liquid
• Where the plug of the Direct Plug-in Adapter is used as the
as sunshine, re or the like.
lled objects, lighted candles).
disconnect device, the disconnect device shall remain readily
operable.
2 Notice
Any changes or modications made to this device that are not
expressly approved by Gibson Innovations may void the user’s
authority to operate the equipment.
Care of the environment
Disposal of your old product
Your product is designed and manufactured with high
quality materials and components, which can be recycled
and reused.
Do not throw away the product with the normal household waste
at the end of its life, but hand it in at an ofcial collection point or
recycling. By doing this, you help to preserve the environment.
Environmental information
All unnecessary packaging has been omitted. We have tried to make
the packaging easy to separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene (bags, protective foam
sheet.)
Your system consists of materials which can be recycled and reused
if disassembled by a specialized company. Please observe the local
regulations regarding the disposal of packaging materials, exhausted
batteries and old equipment.
Trademark notice
The Bluetooth word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Gibson
Innovations Limited is under license. Other trademarks and trade
names are those of their respective owners.
Specications are subject to change without notice.
2015 © Gibson Innovations Limited. All rights reserved.
This product has been manufactured by, and is sold under the responsibility of Gibson
Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product.
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.
and are used under license from Koninklijke Philips N.V.
BT3000_98_Short User Manual_V1.0
Note
• The type plate is located on the bottom of the product.
This is CLASS II apparatus with double insulation, and no
protective earth provided.
Always there to help you
Register your product and get support at
www.philips.com/support.
PDF
www.philips.com/welcome
Question?
Contact
Philips
User Manual
To download the full user manual, visit
www.philips.com/support.
Always there to help you
Register your product and get support at
www.philips.com/welcome
Question?
Contact
Philips
Short user manual
BT3000_98_SUM_V1.0.indd 1 8/3/2015 3:02:45 PM
Page 2
2”
4 x AA
ON/OFF
2”
The product can be powered by either AC mains or batteries.
Press and hold for 2 seconds to turn on the speaker.
» The LED indicator ashes blue.
» If the batter y is low, the LED indicator ashes red.
2”
Play from Bluetooth-enabled devices
1 On the speaker, press and hold for 2 seconds.
» The LED indicator ashes blue.
2 On your Bluetooth device, enable Bluetooth and search for Bluetooth devices.
3 Select [PHILIPS BT3000] on your device to start pairing and connection. If necessary,
enter default password “0000”.
» After successful pairing and connection, the speaker beeps twice, and the
LED indicator turns solid blue.
• If you fail to nd [Philips BT3000] for pairing, press and hold PAIRING for two
seconds to enter pairing mode.
After Bluetooth connection, you can control an incoming call with this speaker.
Button Function
Press to answer an incoming call.
Press and hold for 2 seconds to reject an incoming call.
During a call, press to end the current call.
Note: Music play pauses when there is an incoming call.
PHILIPS BT3000
123-456-7890
4 Play audio on the Bluetooth device.
Note:
• Keep away from any other electronic device that may cause interference.
• Before connecting another Bluetooth device, disconnect the current device
rst.
Enter Bluetooth pairing mode;
Disconnect Bluetooth connection.
Note: To switch to audio-in mode, make sure that there
is no Bluetooth connection, or music playback through
Bluetooth is paused.
Specications
Amplier
Total Output Power 5 W
Signal to Noise Ratio > 67 dB
Audio-in Input 600 mV RMS 20 kohm
Bluetooth
Bluetooth Version V3.0
Supported Proles HFP, A2DP, AVRCP
Range 10 m (Free space)
General information
Power Supply
- AC Power
(power adapter)
- Battery 4 x 1.5 V LR6 AA
Operation Power
Consumption
Dimensions - Main Unit
(W x H x D) 280 x 121 x 93 mm
Weight - Main Unit 1.3 kg
Brand name: PHILIPS;
Model: ICP12-050-1500D;
Input: 100-240 V~, 50/60 Hz, 0.3 A;
Output: 5 V 1500 mA;
1.95 W
BT3000_98_SUM_V1.0.indd 2 8/3/2015 3:02:48 PM
Loading...