Page 1
Register your product and get support at
www.philips.com/welcome
BDP9600
EN User manual 3
MS-MY Manual pengguna 31
ZH-HK Ԛʹ˫ 61
ZH-CN Ⴌ߀൱Ҭ 87
Page 2
Contents
1 Important 4
Safety and important notice 4
Trademark notice 5
2 Your Blu-ray disc player 6
Feature highlights 6
Playable media 6
Product overview 6
3 Connect 8
Connect video/audio cables 8
Route audio to other devices 9
Connect a USB device 10
Connect a network 10
Connect power 10
4 Get started 11
Prepare the remote control 11
Find the TV input 11
Use the Home menu 11
Navigate a menu 11
Select a menu display language 11
Set up a network 12
Use Philips EasyLink 13
5 Play 14
Play a disc 14
Play from a USB device 14
Play video 14
Play photo 17
Play music 17
Browse PC 18
Browse Net TV 18
English
6 Adjust settings 20
Video setup 20
Audio setup 21
Network setup 22
EasyLink setup 22
Preference setup 23
Advanced setup 24
7 Additional Information 25
Update software 25
Care 26
Specifications 26
8 Troubleshooting 27
9 Glossary 28
EN
3
Page 3
1 Important
Safety and important notice
Warning
Risk of overheating! Never ins tall the produc t in a •
confined space. Alw ays leave a space of a t leas t 4 inches
around the product for ve ntilation . Ensure cur ta ins or
other objec ts never cover the ventilation sl ots on t he
product.
•
Never p lace th e product , remote control or batte ries
near naked flames or other heat sources, including direct
sunlight.
•
Only use this product indoors. Keep this product away
from water, moisture and liquid-filled objects.
•
Never p lace this product o n other elec tri cal equipment.
Keep away from this pr oduc t dur ing lig htning storms. •
Wher e the ma ins plug or an ap pliance coupler is used as •
the disconnect device, t he disconnect device shall remain
readily operable.
•
Visible and i nvisible laser radiation when open. Avoid
exposure to b eam.
•
This product wi th Cla ss I cons truction sha ll be con nected
to a Mains socket outl et with a protective ear thing
connection.
Health warning on viewing 3D
If you or your family has a histor y of epilepsy •
or photosensitive seizures, consult a medical
professional before exposing yourself to
flashing light sources, rapid image sequences
or 3D viewing.
To avoid discomfort such as dizziness, •
headache or disorientation, we recommend
not watching 3D for extended periods of
time. If you experience any discomfort, stop
watching 3D and do not immediately engage
in any potentially hazardous activity (for
example driving a car) until your symptoms
have disappeared. If symptoms persist, do
not resume watching 3D without consulting a
medical professional first.
Parents should monitor their children during •
3D viewing and ensure they do not experience
any discomfort as mentioned above. Watching
3D is not recommended for children under 6
years of age as their visual system is not fully
developed yet.
CLASS 1
LASER PRODUCT
Disposal of your old product and
batteries
Your product is designed and manufactured with
high quality materials and components, which can
be recycled and reused.
Never dispose of your product with other
household waste. Please inform yourself about the
local r ules on the separate collection of electrical
and electronic produc ts and batteries. The correct
disposal of these products helps prevent potentially
negative consequences on the environment and
human health.
Your product contains batteries, which cannot be
disposed of with normal household waste.
Please inform yourself about the local rules on
separ ate collection of bat teries. The correct
disposal of batteries helps prevent potentially
negative consequences on the environment and
human health.
Please visit www.recycle.philips.com for additional
information on a recycling center in your area.
Copyright notice
This item incorporates copy protection technology
that is protected by U.S. patents and other
intellectual property rights of Rovi Corporation.
Reverse engineering and disassembly are
prohibited.
Open source software
Philips Electronics Singapore Pte Ltd hereby offers
to deliver, upon request, a copy of the complete
corresponding source code for the copyrighted
open source sof tware packages used in this product
for which such offer is requested by the respective
licenses.
This offer is valid up to three years after product
purchase to anyone in receipt of this information.
To obtain source code, please contact
open.source@philips.com. If you prefer not to
use email or if you do not receive confirmation
receipt within a week after mailing to this email
address, please write to “Open Source Team,
Philips Intellectual Proper ty & Standards, P.O. Box
220, 5600 AE Eindhoven, The Netherlands.” If you
do not receive timely confirmation of your letter,
please email to the email address above.
4
EN
Page 4
Trademark notice
‘Blu-ray’, ‘Blu-ray
Disc’, ‘Blu-ray Disc’ logo, ‘Blu-ray 3D’ and ‘Blu-ray
3D’ logo are the trademarks of Blu-r ay Disc
Association.
“Qdeo” and “QuietVideo” are
trademarks of Marvell or its affiliates.
HDMI, and HDMI logo and HighDefinition Multimedia Inter face are tr ademarks or
regis tered trademarks of HDMI licensing LLC.
a digital video format created by DivX, Inc. This is
an official DivX Certified
®
device that plays DivX
video. Visit divx.com for more information and
software tools to conver t your files into DivX video.
ABOUT DIVX VIDEO: DivX® is
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
®
Certified
device must be registered in order to
play purchased DivX Video-on-Demand (VOD)
movies. To obtain your registration code, locate the
DivX VOD sec tion in your device setup menu. Go
to vod.divx.com for more information on how to
complete your registration.
®
DivX
, DivX Cer tified®, DivX Plus™ HD and
associated logos are registered trademarks of DivX,
Inc. and are used under license.
English
DLNA®, the DLNA Logo and
DLNA CERTIFIED
®
are tr ademarks, service mar ks,
or cer tification marks of the Digital Living Network
Alliance.
The Wi-Fi CERTIFIED Logo is a
certification mark of the Wi-Fi Alliance.
Manufactured under license from
Dolby Laboratories. Dolby and the double-D
symbol are trademarks of Dolby Laboratories.
Manufactured under license under
U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380;
5,978,762; 6,226,616; 6,487,535; 7,212,872;
7,333,929; 7,392,195; 7,272,567 & other U.S. and
worldwide patents issued & pending. DTS and the
Symbol are registered trademarks, & DTS-HD,
DTS-HD Master Audio, and the DTS logos are
trademar ks of DTS, Inc. Product includes software.
© DTS, Inc. All Rights Reser ved.
‘BD LIVE’ and ‘BONUSVIEW’ are trademarks of
BONUSVIEW™
Blu-ray Disc Association.
The USB-IF Logos are trademarks of
Universal Serial Bus Implementers Forum, Inc.
‘DVD Video’ is a trademark of
DVD Format/Logo Licensing Corporation.
Java and all other Java trademarks and logos
are tr ademark s or registered trademarks of Sun
Microsystems, Inc. in the United States and/or other
countries.
EN
5
Page 5
2 Your Blu-ray disc
player
Congratulations on your purchase, and welcome to
Philips! To fully benefit from the support that Philips
offers (e.g. product software upgrade), register your
product at www.philips.com/welcome.
If you contact Philips, you will be asked for the model
and serial number of this player. The model number
and serial number are on the back of this player. Write
the numbers here:
Model No. __________________________
Serial No. ___________________________
Feature highlights
For optimal performance of this player, it is
recommended to regularly update the software of
this player.
Qdeo video processing for movies in its purest
form
Qdeo processing produces an image that has
reduced noise, enhanced color, improved contrast,
fine detail and an enhanced sense of depth, resulting
a quite, pleasing and immersive viewing experience.
3D Blu-ray disc play
This player can play 3D Blu-ray discs and it provides
a full HD 3D experience at home. Connect your
player to a 3D-compliant TV with an HDMI cable,
and wear 3D glasses that are compatible with the
TV to enjoy excitement of the 3D world.
Net TV
Net TV brings you a wide range of online
information and enter tainment on your T V which is
connected to this player. With Net TV you can enjoy
some of the best websites tailored to fit your TV.
DLNA
This Philips player has a built-in DLNA network link
to let you watch videos, view photos and listen to
music right from your PC. DLNA-certified products
offer expanded capabilities that enable it to play not
one but multiple roles in your digital home network.
DivX Plus HD
This player is a DivX Plus HD Certified device. It
plays all DivX video including DivX Plus HD video
files (H.264 video with the .mk v file extension and
AAC audio) up to 1080p and premium Hollywood
content.
High fidelity 7.1 channel surround sound
This player supports the high-definition audio such
as Dolby TrueHD and DTS-HD Master Audio.
Playable media
This player can play:
BD-Video, BD-R/RE2.0, BD 3D•
DVD, DVD-Video, DVD+R /+RW, DVD-R /-•
RW, DVD+R/-R DL (Dual Layer)
Video CD/SVCD•
Audio CD, CD-R/CD-RW, MP3 media, WMA •
media, JPEG files
DivX (Ultra)/DivX Plus HD media, MK V media•
USB flash drive•
Region codes
You can play discs with the following region codes.
Region code Countries
DVD Blu-ray
A
Product overview
Main unit
ab
a
b Display panel
c IR sensor
d Disc compartment
e
f
g
h
c
Turn on this player or switch to standby •
mode.
Detec t signals from the remote control. •
Always point the remote control at the
IR sensor.
Open or close the disc compartment . •
Start or resume play.•
Pause play.•
jack
Connect a USB device. •
d
Asia Pacific,
Taiwan,
Korea
e
g
hf
EN
6
Page 6
Remote control
a
b
c
d
e
f
g
h
i
j
k
l m
e
q
p
o
n
j
a
b
c DISC/POP-UP
d
e
Turn on this player or switch to standby •
mode.
When EasyLink is enabled, press and •
hold for at least three seconds to tur n all
connected HDMI CEC compliant devices
to standby.
Access the home menu of this player.•
• BD: Access or exit the pop-up menu.
• DVD: Access or exit the disc menu.
/ / /
Navigate through the menus.•
/
Skip to the previous or nex t title, chapter, •
or track.
f
g
h
i
j Color buttons
k Alphanumeric buttons
l AUDIO
m SUBTITLE
n
o
p TOP M ENU
q OK
Access options for the current activity or •
selection.
Retur n to a previous display menu.•
/
Search backward or forward.•
Stop play.•
Press and hold to open/close the disc •
compar tment.
• BD: Select tasks or options.
Select an item to play.•
Enter values.•
Enter letters via SMS style entr y.•
Select an audio language or channel on •
a disc.
Select a subtitle language on a disc.•
Start or resume play.•
Pause play.•
Move the paused picture for ward frame •
by frame .
• BD: Display the top menu.
• DVD: Display the title menu.
Confirm an entry or selection.•
English
EN
7
Page 7
3 Connect
Make the following connections to use this player.
Basic connections:
Video•
Audio•
Power•
Optional connections:
Route audio to other devices•
HDMI-compliant AV receiver/amplifier•
Multi-channel AV amplifier/receiver•
Digital AV amplifier/receiver•
Analog stereo system•
USB device•
Wired/Wireless network•
Tip
If the T V has a DV I connector only, connect v ia an •
HDMI/DVI adaptor. Connec t an audio cable for sound
output.
•
If there is a blank TV screen under HDM I connecti on,
on the r emote control press and then press “731”
(numer ic buttons) to recover picture display.
•
If this player connec ts to a T V compatible wit h 1080 p
or 1080p/24Hz, Philips recommends HDMI category
2 cable, also known as High Speed HDMI c able , for
optimal video and audio ou tput.
•
To play the digital video images of a BD- video or DVDvideo via an HDMI con nection, it is necessary that both this
player and the display device (or an AV receiver/amplifier)
support a copyright pr otec tion s ystem call ed HDC P (hig hbandwidt h digital con tent protec tion system).
•
This connection provides the best picture quality.
Note
Refer to the ty pe plate at the back or bottom of the •
product for identification and supply ratings.
•
Befor e you make or change any con nections , ensure that
all the devices are disconn ected from the powe r outlet.
Connect video/audio cables
Select the best video connection that the TV can
support.
• Option 1: Connect to the HDMI jack (for a
HDMI, DVI or HDCP-compliant TV).
• Option 2: Connect to the component video
jacks (for a standard TV or Progressive Scan
TV).
• Option 3: Connect to the composite video
jack (for a standard T V).
Option 1: Connect to the HDMI jack
1 Connect an HDMI cable (not supplied) to:
the • HDMI jack on this player.
the HDMI input jack on the TV. •
HDMI IN
Option 2: Connect to the component
video jacks
Y
Pb
Pr
AUDIO IN
1 Connect the component video cables (not
supplied) to:
the • Y Pb/Cb Pr/Cr jacks on this player.
the COMPONENT VIDEO input jack s •
on the T V.
2 Connect the audio cables (not supplied) to:
the • Audio LINE OUT -L/R jacks on this
player.
the AUDIO input jacks on the TV.•
Tip
The com ponent video inpu t jack on the TV might b e •
labeled as Y Pb Pr or YU V.
8
EN
Page 8
Option 3: Connect to the composite
video jack
AUDIO IN
VIDEO IN
1 Connect a composite video cable (not
supplied) to:
the • VIDEO jack on this player.
the VIDEO input jack on the T V.•
2 Connect the audio cables (not supplied) to:
Route audio to other devices
You can route the audio from this player to other
devices.
Connect to an HDMI-compliant AV
receiver/amplifier
the • Audio LINE OUT- L/R jacks on this
player.
the AUDIO input jacks on the TV.•
Tip
The video input jack on the T V might be lab eled a s A/ V •
IN, VIDEO I N, COMPOSITE or B ASEB AND.
1 Connect an HDMI cable (not supplied) to:
Connect to a multi-channel AV receiver/
amplifier
1 Connect the 7.1-channel audio cables (not
the • HDMI jack on this player.
the HDMI jack input jack on the device.•
Tip
The HDMI connection provides the best audio quality. •
7.1 CH AUDIO INPUT
supplied) to:
the • 7.1 CH AUDIO OUTPUT jacks on
this player.
the corresponding AUDIO input jacks on •
the device.
Tip
To connect 5.1-channel AV receiver/amplifier, connect •
the 7.1-chan nel audio jacks except the SL/SR jacks.
•
You can optimize the spea ker ou tput (see “Adjus t
settings” >[Audio]> [Speaker Setup]).
English
HDMI IN
EN
9
Page 9
Connect to a digital AV amplifier/receiver
Connect to coaxial jack
Connect a USB device
1 Connect a USB device to the (USB) jack
on the front panel of this player.
COAXIAL
1 Connect a coaxial cable (not supplied) to:
the • COAXIAL jack on this player.
the COAXIAL /DIGITAL input jack on •
the device.
Connect to optical jack
OPTICAL
1 Connect an optical cable (not supplied) to:
the • OPTICAL jack on this player.
the OPTICAL/DIGITAL input jack on the •
device.
Connect an analogue stereo system
AV IN
Note
Press • , and select [browse USB] in the menu to access
the content and play th e files .
• jack on this
Connect a USB device only to the
player.
•
Phili ps does not guarantee compatibi lity with a ll USB
devices.
Connect a network
With a wired or wireless connection (see “Get
started” > “Set up a network ”), you can connect
this player to:
Connect power
the Internet (for software update/BD •
Live/Net TV service).
or a home network (to access media files •
from a DLNA media server, e.g. PC).
Note
Internet a ccess to P hilips website for software u pdate •
may not be a llowed, depending on the r oute r you use
or the Inter net Se rvice Prov ider ’s policy. Cont act your
Internet S ervice Pr ovider for more informat ion.
Caution
Risk of player d amage! Ensu re tha t the power supply •
voltage cor responds to the vol tage print ed on the back
of the un it.
•
Befor e connecting the AC power cor d, ens ure you have
completed all other connections.
Note
The type pla te is loc ated on the back of the player. •
1 Connect the audio cables (not supplied) to:
10
the • Audio LINE OUT-L/Rjacks on this
player.
the AUDIO input jack s on the device.•
EN
1 Connect the AC power cable to:
this player.•
the wall socket.•
This player is ready to be set up for use. »
Page 10
4 Get started
Use the Home menu
Caution
Use of controls or adju stments or per formance of •
proce dure s other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
Prepare the remote control
1 Press at the back of the remote control to
open the back cover.
2 Insert two AAA batteries with cor rec t
polarity (+/-) as indicated.
3 Replace the back cover.
Note
If you ar e not goi ng to use t he remote control fo r a long •
time , remove the batteries .
•
Do not mix batteries (old and new or carbon and
alkaline, etc.).
•
Batteries contain chemical substances, so they should be
disposed of properly.
1 Press to display the home menu.
Navigate a menu
1 When a menu is displayed, press the buttons
Button Action
OK Confirm a selection.
To start disc play, select • [play Disc].
To play the USB contents, select • [browse
USB].
To access the setup menus, select • [Setup].
To access media files from a DLNA media •
server (e.g. PC), select [browse PC].
To access the Net TV services on the •
Internet, select [browse Net TV].
on the remote control to navigate.
/
/
Move up or down.
Move left or right.
Enter numbers/letters/
text.
Select a menu display language
English
Find the TV input
1 Press to turn on this player.
2 Turn on the T V and switch to the video input
(refer to the TV user manual on how to select
the A/V input).
First time use
When you turn on this player for the first time or
this player is reset to the default set ting, you are
prompted to select a menu display language and
then a country.
Note
If this player is connected to an HDM I CEC compliant •
TV, and you select [Auto] for the [Menu L angu age],
it switche s automatically to the same menu display
langu age as per your T V set ting.
1 In the Home menu, select [Setup] and press
OK.
2 Select [Preference], and press .
3 Select [Menu Language], and press .
EN
11
Page 11
The language options may var y from •
different regions.
4 Press / to select a language, and press
OK.
Set up a network
You can connect this player to the Internet (for
software update/BD Live/Net TV ser vice), or to a
home network (to access media from a DLNA media
server, e.g. PC).
To access media from your PC, you need to ensure:
a media server software (e.g. Windows •
Media Player 11) is installed on your PC;
and the media server software is •
configured to enable media sharing (See
the “Help” documentation from the
media server software).
Tip
The wired ne twor k ensures the bes t per formance fo r •
data transmission between the devices.
Set up a wireless network
Note
Ensur e that this player and the rou ter and the PC a re all •
switched on.
Set up a wired network
Note
Ensure that the network cables are properly connected. •
1 Connect a network cable (not supplied) to:
2 To access media files from your computer,
3 Turn on this player, the computer and the
12
the • LAN por t on this player.
the LAN por t on a router with Internet •
connection.
connect the computer to the router.
router.
EN
Tip
The wireless per for mance can vary due to band width •
connection, network traffic and some environmental
effects , such a s surrounded by metal panel or heavy
concrete, r adio i nter fer ence and cover age distance.
Page 12
Install the network connection
For the first time you connect the network, install
the network connection.
1 Set up a wired or wireless networ k.
2 Press to display the home menu.
3 Select [Setup] and press OK.
4 Select [Network], and press OK.
5 Select [Network Installation], and press OK.
6 Follow the on-screen instructions to complete
the network installation.
After the network installation completes, »
you can access the services: browse Net TV,
browse PC, BD-Live, software updates.
Tip
You can check the status of the wi red or w ireless •
connection of this player (see “Adjust settings” >
“Networ k Setu p” > [View Network Settings] or
[View Wireless Settings]).
One-touch play
1
Press (standby) to turn on this player.
The TV (if the TV supports one-touch play) »
automatically turns on and switches to the
correct video-in channel.
If a disc is loaded, disc play automatically »
starts.
One-touch standby
1
Press and hold (standby) for more than
3 seconds.
All the connected devices (if the device »
supports one-touch standby) automatically
switch to standby.
Note
Phili ps does not guarantee inte roperab ilit y with all HDMI •
CEC devices.
English
Use Philips EasyLink
This player supports Philips EasyLink which uses the
HDMI CEC (Consumer Electronics Control) protocol.
You can use one single remote control to control
EasyLink-compliant devices that are connected
through HDMI connectors.
Note
To enable the Eas yLink feature, you must turn o n the •
HDMI CEC ope rat ions on t he TV and on other devices
connected to TV. Refe r to the T Vs/dev ices manual for
details.
EN
13
Page 13
5 Play
Play a disc
Caution
Do not inser t any object s othe r than d iscs into the disc •
slot.
1 Press on the front panel to open the disc
compar tment.
You may also press and hold •
remote control to open/close the disc
compar tment.
2 Insert a disc with its label facing up.
3 Star t disc play.
To stop disc play, press •
Note
Check disc/file formats supported (see “Your Blu-ray disc •
player” > “Pl ayabl e media”).
•
If the password entry m enu is displayed, enter the
pass word before you can play the locked or r estricted
disc (see “Adjust settings” > “ Preference Setu p” >
[Parental Control] ).
•
If you pause or stop a disc, the screen saver appears after
10 minutes of inacti vit y. To deacti vate the screen saver,
press any button .
•
After you pause or stop a disc and no button is pressed
with in 30 minutes, this player automatically switches to
standby.
Play from a USB device
Play or view media files on the following USB devices:
flash drive•
memory card reader•
HDD (This player can detect only a portable •
hard disc drive with USB power peak current
no more than 500mA.)
on the
.
3 Select a file to play, and press OK.
Play starts (see “Play video”, “Play photo”, »
Play music” for details).
To stop play, press •
device.
Note
Phili ps does not guarantee compatibi lity with a ll USB •
devices.
•
Not all d igit al camera s are supported. Digital cameras that
require PC programme installation are not supported.
or remove the USB
Play video
Control video play
1
Play a title.
2 Use the remote control to control the play.
Button Action
Pause play.
Press repeatedly •
forward play frame by frame.
Start or resume play.
Stop play.
Skip to a previous/next title or chapter.
/
Search fast-backward or fast-forward.
/
Press repeatedly to change the search
speed.
Press once •
repeatedly
backward or forward.
Note
For BD discs with Java application, availabilit y of the play •
resume function depends on specific discs.
Change video play
1
Play a title.
2 Use the remote control to change the play.
to slow
, and then press
/ to slow play
1 Connect a USB device to the (USB) jack.
2 Press , and select [browse USB], and press
OK.
A contents menu is displayed. »
14
EN
Button Action
AUDIO Directly select an audio language or
channel on a disc.
SUBTITLE Directly select a subtitle language
on a disc.
Access the above mentioned
actions or more options (e.g. repeat
or shuffle play mode).
Page 14
Note
Some operations may not work with some d iscs . See the •
infor mation accom panyi ng the disc for details.
Display menu
BD-video disc
• TOP MENU stop the video play and shows
the disc menu. This feature is disc-dependent.
• POP-UP MENU access to the BD-video disc
menu without interrupting disc play.
DVD-video disc
• TOP MENU display the root menu of a disc.
• DISC MENU display disc information and
guide you through the available functions in
the disc.
VCD/SVCD/DivX disc:
• DISC MENU display the content of the disc.
Tip
If the PBC set ting is off, the VCD/S VCD skips the •
menu and starts play from th e firs t title. To display the
menu before play, turn on the PBC set ting (see “Adjust
settings” > [Preference] > [VCD PBC]).
Display play information
1
During play, press .
The play options menu is displayed. »
2 Select [Info] in the menu, and press OK.
Select a title/chapter
1
2 Select [Titles] or [Chapters] in the menu, and
3 Select the title or chapter number, and press
The current status of disc play is displayed. »
During play, press .
The play options menu is displayed. »
press OK.
OK.
Skip play to a specific time
1
During play, press .
The play options menu is displayed. »
2 Select [Time Search] in the menu, and press
OK.
3 Press the Navigation buttons ( / ) to
change the time to skip to, and press OK.
Zoom in/out
1
During play, press .
The play options menu is displayed. »
2 Select [Zoom] in the menu, and press OK.
3 Press the Navigation buttons ( / ) to select
a zoom fac tor, and press OK.
4 Press the Navigation buttons to navigate in
the zoomed picture.
To cancel zoom mode, press •
the zoom factor bar, and press the
Navigation buttons (
zoom fac tor [x1] is selected.
to display
/ ) until the
Repeat play for a specific section
1
During play, press .
The play options menu is displayed. »
2 Select [Repeat A-B] in the menu, and press
OK to set the starting point.
3 Forward the video play, and press OK to set
the ending point.
Repeat play starts. »
To cancel repeat play mode, press •
select [Repeat A-B] and press OK.
Note
The marked section for repeat play is only possible •
within a track/title.
,and
View video play from different camera
angles
1
During play, press .
The play options menu is displayed. »
2 Select [Angle List] in the menu, and press .
3 Select an angle option, and press OK.
Play changes to the selected angle. »
English
Note
Applicable only to discs t hat contain multi -angle scenes. •
15
EN
Page 15
Manually shift subtitle display
You can manually adjust the subtitle position on the
TV screen.
1 During play, press .
The play options menu is displayed. »
2 Select [Subtitle Shift] in the menu, and press
OK.
3 Press the Navigation buttons ( / ) to shif t
the subtitle, and press OK.
Tip
Subtitle shift is not suppor ted for DivX video with •
external subtitles.
Sync audio output with video play
If a video play is slower than audio output (sound
does not match with the pictures), you can delay
the audio output to match the video.
1 During play, press .
The play options menu is displayed. »
2 Select [Audio Sync] in the menu, and press
OK.
A slider bar is displayed »
3 Press the Navigation buttons ( / ) to to
move the slider until the sound can match the
pictures.
Play BD-video
Blu-ray video disc has a larger capacity and supports
features such as high-definition videos, multichannel surround sounds, interactive menus and
so on.
1 Insert a BD-video disc.
2 Press , selec t [play Disc] and press OK.
3 Play automatically starts, or select a play
option in the menu and press OK.
During play, you can press • TOP MENU
to display additional information, features
or content stored in the disc.
During play, you can press • POP-UP
MENU to display the disc menu without
Enjoy Blu-ray 3D video
This player can play Blu-ray 3D videos.
interrupting disc play.
1 Ensure that the TV is 3D and HDMI compliant,
and connect the TV to this player through an
HDMI cable.
2 Turn on Blu-ray 3D output (see “Adjust
settings” > [Video] > [Blu-ray 3D video]).
3 Wear 3D glasses that are compatible with the
TV for viewing.
Enjoy BONUSVIEW
(Applicable only to a disc compatible with the
BONUSVIEW or Picture-in-Picture feature)
You can instantly view additional content (such as
commentaries) in a small screen window.
1 Press .
The play options menu is displayed. »
2 Select [PIP Selection] in the menu, and then
select [PIP], and press OK.
The secondary video window is turned on. »
3 Select [2nd Audio Language] or [2nd Subtitle
Language] in the menu, and press
.
4 Select the language to play, and press OK.
Enjoy BD-Live
(Applicable only to a disc that enables BD-Live.
Make sure that this player is connected to the
Internet.)
Additional contents (such as movie trailers,
subtitles, and so on) can be downloaded to a
connected USB storage device. Special video data
can be played while they are being downloaded.
When the disc with BD-Live is played, the ID for
this player or the disc can be sent to the content
provider via the Internet. Services for BD-Live vary
from disc to disc.
Play DivX® video
DivX video is a digital media format that retains
high quality despite a high rate of compression.
1 Insert a disc or USB device that contains the
DivX videos.
2 Press , selec t [play Disc] or [browse USB],
and press OK.
A contents menu is displayed. »
3 Select a video folder, and press OK.
4 Select a title to play, and press OK.
5 Use the remote control to control the play.
Button Action
AUDIO Select an audio language or
SUBTITLE Select a subtitle language.
channel.
Stop play.
EN
16
Page 16
Note
You can only play DivX videos that were rented or •
purchased with the DivX registration cod e of this player
(see “Adjus t Set ting s” > [Adva nced] > [DivX
Code]).
•
You can play DivX vide o files of u p to 4GB .
This player ca n display up to 45 characters in th e subtitle . •
®
VOD
4 Select [Slide Animation] in the menu, and
press OK.
5 Select a type of animation effect, and press
OK.
Play a musical slideshow
Create a musical slideshow to play simultaneously
MP3/WMA music files and JPEG photo files.
English
Play photo
Play photo as slideshow
You can play JPEG photos (files with .jpeg or .jpg
extensions).
1 Insert a disc or USB device that contains the
JPEG photos.
2 Press , selec t [play Disc] or [browse USB],
and press OK.
A contents menu is displayed. »
3 Select a photo folder, and press OK to enter.
4 Press OK to start slideshow play.
Control photo play
1
Set a slideshow interval and animation
1
2 Select [Duration per slide] in the menu, and
3 Select a duration, and press OK.
To select a photo, press the • Navigation
buttons.
Note
It may requir e longer time to display the disc content on •
the T V if lar ge number of songs/photos compiled onto
one disc.
•
This player ca n only display digit al camera pictures
according to the JPEG-EXIF format, typically used by
most digit al cam era s. It c annot display Motion JPEG,
or pic tures in for mats other t han JP EG, or sound clips
associated with pictures.
•
Folders/files that exceed the supported limit of this
player cannot be displayed or played .
Play a photo slideshow.
Press •
to access play options, select an
option, and press OK.
During slideshow play, you may also •
press
/ to flip a photo horizontally/
vertically.
If the slideshow stops, press •
play.
During play, press .
The play options menu is displayed. »
press OK.
to continue
Note
To create a musical slideshow, you must s tore the MP3/ •
WMA an d JPEG fi les on the same disc or U SB dev ice.
1 Play MP3/WMA music.
2 Press to return to the main menu.
3 Navigate to enter a photo folder, and press
OK to start slideshow play.
Slideshow begins and continues till the end »
of the photo folder.
Audio continues to play until the end of »
the disc.
To stop the slideshow play, press •
To stop the music play, press •
.
again.
Play music
Control a track
1
Play a track.
2 Use the remote control to control the play.
Button Action
Pause play.
Start or resume play.
Stop play.
/
Skip to a previous/next track.
Select an item to play.
/
Search fast-backward or fastforward. Press repeatedly to
change the search speed.
Access the repeat or shuffle
play mode.
EN
17
Page 17
Play MP3/WMA music
MP3/WMA is a type of compressed audio file (files
with .mp3, .wma extensions).
1 Insert a disc or USB device that contains the
MP3/WMA music.
2 Press , selec t [play Disc] or [browse USB],
and then press OK.
A contents menu is displayed. »
3 Select a music folder, and press OK.
4 Select a file to play, and press OK.
To return to the main menu, press •
.
4 Select [browse PC], and press OK.
This player automatically scans, and displays »
a list for the available networked devices.
5 Select your DLNA media server (i.e. your PC)
from the list, and press OK.
6 Select a media file from the DLNA media
server (i.e. your PC).
7 Press OK to start play.
You may control play with play features •
(see “Play video”, “Play photo”, “Play
music” for details).
Note
For disc recorded in multiple sessions, onl y the fir st •
session is played.
•
For a WMA file that is protected by Digital Rights
Management (DRM), it cannot be played o n this player.
•
This player does not su ppor t MP3PRO audio for mat.
For any special char acter that is present in the MP3 track •
name (ID3) or album name , it might not be displayed
corr ectly on the screen because these cha rac ter s are not
supported.
•
Folders/files that exceed the supported limit of this
player cannot be displayed or played .
Browse PC
With a home network, you can play videos /music /
photos which are streamed from a DLNA media
server (e.g. PC) to your TV through this DLNA
certified player.
Note
To browse a PC, ensure that a DLNA media ser ver •
soft war e (e.g. Windows Media Player 11) is ins talled on
the PC .
1 Set up a home net work (see “Get started” >
“Set up a network”).
Make sure that you have completed the •
network installation.
2 On your PC, in the DLNA media server
software, you need to set:
a Share my media to this player (see
“Help” information in the media server
software).
b Share files or add files to the librar y (see
“Help” information in the media server
software).
3 Press to display the home menu.
Browse Net TV
Connect this player to the Internet to access the Net
TV online service, such as movies, pictures, music
infotainment. You can enjoy Net TV on your TV which
is connected to this player.
Note
Beca use Net TV is an onlin e sys tem, i t can be modified •
over time to bet ter serve its purpose.
•
Some Net TV serv ices ca n be added, cha nged or s topp ed
after some time.
•
For Net TV, You cannot download and save files nor install
plug-ins.
1 Set up a network (see “Get started” > “Set up
a network”).
Make sure that you have completed the •
network installation.
2 Press to display the home menu.
3 Select [browse Net TV ], and press OK.
4 After the star t page opens, use the remote
This player starts to connect to Net TV and »
opens the start page.
» For first use, follow the on-screen
instructions to complete the registration,
and then switch on parental control to lock/
unlock the services offered on the Net TV
pages.
control to browse Net T V.
EN
18
Page 18
Button Action
/ / /
OK Confirm a selection.
Select a service, or an item on
Internet pages.
Retur n to a previous page, or
delete input text.
Access actions related to a current
activity.
Enter number/letter (e.g. email
address and lock/unlock code).
The Net T V start page
Show your favorite services and some
recommended services.
The Browse all page
You can view all the Net TV services by category.
The favorite services are marked as a star icon.
Browse another country
On the Browse all page, you can switch the Net
TV country. Another country might have different
services.
Mark favorites
You can mark up to 12 services. Only Net
TV services can be marked as a favorite.
Adver tisement and open Internet websites cannot
be marked.
1) Select the icon for a service.
2) Press
To unmark a favorite, press
unmark action and press OK.
Open Internet websites
With Net TV you can link up to the open Inter net.
You can view any website. Remember that most
Internet websites are not tailored to be viewed on
a TV screen.
1) On the Browse all page, select Browse Internet,
and press OK.
2) On the on-screen keyboard, select a character
and press OK. Repeat Step 2 to enter a web
address.
To delete input tex t, press
To navigate to the available links on a open
internet page, press
control, and press OK to open the link.
to select Mark favorite, and press OK.
to select the
BACK.
/ / / on the remote
Note
Koninklijke Philips Electronics N.V. bears no responsibility •
rega rding the content and the qualit y of the co ntent
provided by the content service providers.
Parental control
You can lock Net TV services and service
categories. When a ser vice is locked, you need to
enter a code to open the service or categor y.
1) Switch on the Parental control:
a. On the Net TV star t page, press
Enable parental control and press OK.
b. With the keypad on the remote control, enter a
4 digit code as lock/unlock code.
c. Enter the same code to confir m.
2) On the Net TV start page or Browse all page,
selec t a ser vice or category.
3) Press
A lock symbol appear s on top of the ser vice icon.
To unlock a ser vice or category, select the service
and press OPTIONS and select Remove lock.
Clear history
Clear the Parental control code, passwords,
cookies and histor y.
1) Press
2) Select [Setup] > [Network] > [Clear Net TV
Memory].
, selec t Lock service and press OK.
Note
Only serv ices on t he Net T V pages can be locked . •
Advertiseme nt and open Intern et websites c an not be
locked.
•
Ser vices are locked per country. Categor ies ar e locked
for all countr ies.
•
When you have registered Net T V and you s witch
off Parent al control in the Opt ions menu, all lock s
are remembere d and ava ilable agai n when you swi tch
Pare ntal control back on.
to display the home menu.
Note
If you clear the Net TV memory wi th Clear his tor y, you •
need to redo the first use r egis tration when you link up
to Net T V again. If you have registered b efore , you can
restore your former favorite ser vices and for mer locks .
, selec t
English
EN
19
Page 19
6 Adjust settings
Note
If the setup option is grayed out, it means the se tti ng •
cannot be changed at the cur rent s tate.
Video setup
1 Press .
2 Select [Setup], and press OK.
3 Select [Video], and press .
Personalized
Blu-ray 3D Video
Select an option, then press OK.
4 Select a setting, then press OK.
[TV Display]
Select a display format:
To return to the previous menu, press •
To exit the menu, press •
.
Optimal
Note
If • [4:3 Panscan] you have selected is not suppor ted
by the disc, the screen disp lays in t he [4:3 Letterbox]
format.
[HDMI Video]
Select an HDMI video output resolution that is
compatible with your TV display capability.
• [Auto] - Detec t and select the best suppor ted
video resolution automatically.
• [Native] - Set to original video resolution.
• [480i/576i], [480p/576p], [720p], [1080i],
[1080p], [10 80 p/24Hz] - Select a video
resolution setting that best is supported by
the TV. See the T V manual for details.
Note
If a selected video resolution is not su ppor ted with •
your T V and a blank screen appears, to recove r picture
display, wait for 10 seconds, or on the remote control
and then press “731” (nu meric but tons).
press
[HDMI Deep Color]
This feature is available only when the display
device is connected by an HDMI cable, and when it
supports deep color feature.
• [Auto] - Enjoy vivid images in over a billion
colors on Deep Color enabled TV.
.
• [On] - Enjoy vivid images in over a billion
colors on Deep Color enabled TV. Output 12
bit color that reduces the posterization effect.
• [Off] - Output standard 8 bit color.
[Component Video]
Select a component video output resolution that is
compatible with the TV display capability.
• [480i/576i], [480p/576p], [720p], [1080i] Select a video resolution set ting that is best
supported by the T V. See the TV manual for
details.
• [4:3 Letterbox] – For 4:3 screen T V: wide-
screen display with black bars on the top and
bottom of the screen.
• [4:3 P anscan] – For 4:3 screen TV: full-height
display with the trimmed sides.
• [16:9 Widescreen] – For wide-screen TV:
display picture at r atio 16:9.
• [16:9] – The display pic ture is at the disc native
aspect ratio (e.g. ratio 4:3, with black bars on
the lef t and r ight side of the screen).
20
EN
Note
If the setting is not compatible with the TV, a blank •
screen appears. Wait for 10 seconds for auto recovery.
•
Copy protected DVDs can onl y output 480p/576p or
480i/576i resolution.
Page 20
[Picture Settings]
Select a predefined set of picture color settings.
• [No optimization] - Switch off all
improvements.
• [Animation] - Ideal for animated pictures.
• [Documentary] - Ideal for nature and scenery.
• [Internet video] - Ideal for videos obtained
from the Internet.
• [Optimal] - The best performance for most
movies and TV series.
• [Personalized] - Use your personal customized
settings.
[Personalized]
Customize your own picture settings.
This featur e only wo rks when • [Personalized] under
[Picture Settings] is selected.
• [Brightness] - Set the brightness of video.
• [Contrast] - Set the contrast of the video
• [Saturation] - Set the color saturation of the
• [Artifact reduction] - Reduce ar tifact.
• [Noise reduction] - Reduce noise in digital
• [ACE] - Adapt contrast enhancement to
• [Sharpness] - Enhance detail, depth and
• [Color] - Set the color tone of the video.
[Blu-ray 3D video]
Set to 2D or 3D output when playing a Blu-ray 3D
disc.
• [Auto] - Enable 3D output if a Blu-ray 3D
• [Off] - Turn off 3D output to enable 2D output.
Note
video.
video.
enhance details in dark area but not affect the
details in bright area.
perceived sharpness in the video.
• [Standard] - No change on color tone.
• [Nature] - Enhance green and blue.
• [Cartoons] - Enhance all except skin tone.
• [Cold] - Enhance blue color.
• [Warm] - Enhance red color.
disc is loaded and the TV is 3D and HDMI
compliant, and the TV is connected through
an HDMI cable. Other wise, only 2D output
is made.
Audio setup
1 Press .
2 Select [Setup], and press OK.
3 Select [Audio], and press .
4 Select an option, and press OK.
5 Select a setting, and press OK.
[Night Mode]
Increase a soft sound level such as dialogue to
make it easier to hear at a low volume, while
simultaneously decreasing a loud sound level.
• [Auto] - Detec t and select a best sound level
• [On] – For quiet viewing at night.
• [Off] – For surround sound with a full dynamic
[Neo 6]
A post processing by DTS to generate a surround
sound effect from 2 channel audio.
• [Cinema] – Enable Neo 6 post processing to
• [Music] - Enable Neo 6 post processing to the
• [Off] – Disable Neo 6 post processing.
[HDMI Audio]
Select an HDMI audio output when you connect
this player and the TV/audio device with an HDMI
cable.
• [Bitstream] – If the connected HDMI
• [Auto] – Detec t and select the best suppor ted
To return to the previous menu, press •
To exit the menu, press •
at a low volume. Applicable to tracks with
Dolby TrueHD audio only.
range.
Note
Applicabl e only to Dolby encoded DV D-video or BD- •
video.
the cinema mode.
music mode.
device supports the appropriate HD audio
decoder,the original audio for mat on the disc is
sent. Otherwise, LPCM is sent.
audio format automatically.
.
English
.
EN
21
Page 21
[Digital Audio]
Select an audio format for the sound output from
the DIGITAL OUT jack (coaxial/optical).
• [Auto] - Detec t and select the best suppor ted
audio format automatically.
• [PCM] - The audio device does not suppor t
multi-channel format. Audio is downmixed to
two-channel sound.
• [Bitstream] - Select the original audio to
experience Dolby or DTS audio (BD-video
special sound effec t is disabled).
Note
Ensur e that the audio format is su ppor ted by the dis c •
and the connected audio device (amplifier/receiver).
• [Bitstream] is selected, interactive audio like
When
button sound is muted.
[PCM Downsampling]
Set the sampling rate for PCM audio output from
the DIGITAL OUT jack (coaxial/optical).
• [On] - PCM audio is down-sampled at 48kHz.
• [Off] - For BD or DVD recorded in LPCM
without copyright protection, two-channel
audio signals up to 96 kHz are output as LPCM
signals with no conversion.
[Speaker Setup]
Optimize the surround output for the connected
speaker system.
• [Speaker Setup] - Activate the test tone for
the speakers and the subwoofer.
• [Speaker Distance] - Set the delay time for
the speakers and the subwoofer if they are
placed closer to the listening position, so that
the sound output from all speakers reach the
listening position at the same time.
• [Speaker Volume] - Set the volume level of
the speakes and the subwoofer to get the ideal
audio balance.
• [Speaker Size]
Set the speaker size for the speakers and •
the subwoofer.
Select • [Large] size for speakers that
can produce low frequency signal below
120 Hz.
Select • [Off] if there is no speaker
connected.
If the front speakers are set to • [Small],
the subwoofer setting is [On] by default.
If the subwoofer is set to • [Off], the front
speakers settings are [Large] by default.
Tip
The test tone is emitted from the spea ker while adj usting •
the volume level.
•
Allow 1ms s etting for every 30cm distance between the
speaker and t he lis tening posi tion .
Network setup
1 Press .
2 Select [Setup], and press OK.
3 Select [Network], and press .
Video
Audio
Network
EasyLink
Preference
Advanced
Network Installation
View Network Settings
View Wireless Settings
Net TV User Location
Clear Net TV Memory
4 Select an option, and press OK.
5 Select a setting, and press OK.
To return to the previous menu, press •
[Network Installation]
Install the network connection.
[View Network Settings]
Display the information for the current network
status and the MAC address of this player.
[View Wireless Settings]
Display the information for the current Wi-Fi status.
[Net TV User Location]
Select the location of the Philips server which
provides Net TV services.
If your country location is not in the list, selec t
[International].
[Clear Net TV Memory]
Clear the cookies, history, data you input for Net
TV which are stored in the cache area of the web
browser.
To exit the menu, press •
.
EasyLink setup
1 Press .
2 Select [Setup], and press OK.
3 Select [EasyLink], and press .
.
EN
22
Page 22
Video
Audio
Network
EasyLink
Preference
Advanced
4 Select an option, and press OK.
5 Select a setting, and press OK.
[EasyLink]
This player supports Philips Easylink which uses
the HDMI CEC (Consumer Elec tronics Control)
protocol. You can use one single remote control
to control all EasyLink-compliant devices that are
connected through HDMI connectors.
• [On] - Turn on EasyLink features.
• [Off] - Disable EasyLink features.
[One Touch Play]
When you press
player, the T V (if the TV supports one-touch play)
automatically turns on and switches to the video-in
channel. Disc play star ts if there is a disc in this
player.
• [On] - Turn on one-touch play feature.
• [Off] - Disable one-touch play feature.
[One Touch Standby]
When you press and hold
connected HDMI CEC devices (if the device
supports one-touch s tandby) switch to standby
mode simultaneously.
• [On] - Turn on one-touch standby feature.
• [Off] - Disable one-touch standby feature.
Note
You must tu rn on the HDM I CEC op erations o n the T V/ •
devices before you ca n enjoy t he EasyLink controls . See
the T V/devices manual for de tails.
•
Phili ps does not guarantee 100 % inte rope rab ilit y wit h all
HDMI CEC compliant devices.
EasyLink
One Touch Play
One Touch Standby
To return to the previous menu, press •
To exit the menu, press •
(standby) to turn on this
(standby), all the
On
On
On
.
Preference setup
1 Press .
2 Select [Setup], and press OK.
3 Select [Preference], and press .
English
.
4 Select an option, then press OK.
5 Select a setting, then press OK.
[Menu Language]
Select an on-screen menu language.
[Audio]
Select an audio language for disc play.
[Subtitle]
Select a subtitle language for disc play.
[Disc Menu]
Select a language for disc menu.
[Parental Control]
Restrict access to discs that are unsuitable for
children. These types of discs must be recorded
with ratings.
To access, enter your last set password or ‘0000’.
To return to the previous menu, press •
To exit the menu, press •
Note
If this player is connected to an HDM I CEC compliant •
TV, and you select [Auto] for the [Menu L angu age],
it switche s automatically to the same menu display
langu age as per your T V set ting.
Note
If the language you have set is not availa ble on the disc , •
the disc uses its own default language.
•
For som e discs, the subti tle/audio l anguage can o nly be
changed from the dis c menu .
Note
Rated discs above th e level you set in • [Parental Control]
requ ire a pa ssword to be played.
•
The rating s are countr y-d ependent . To allow all d iscs to
play, select ‘ 8’ for DVD-v ideo and BD-Video.
•
Some discs have ratings pr inted on them but ar e not
recor ded with ratings. This func tion has no ef fect on
such discs.
.
.
EN
23
Page 23
[Screen Saver]
Turn on or off the screen saver mode. It helps to
protect the TV screen from being damaged due to
over exposure to static image for being too long.
• [On] - Set the screen saver active after 10
minutes of inactivity (for example, in the pause
or stop mode)
• [Off] - Disable screen saver mode.
[Auto Subtitle Shift]
Turn on or off the automatic subtitle shift.
• [On] - The subtitle position on the TV screen
is automatically adjusted.
• [Off] - Disable the automatically subtitle shift.
[Change Password]
Set or change the password.
1) Press the Numeric buttons to enter the
password or your las t set password. If you forget
the password, enter ‘0000’, then press OK.
2) Enter the new password.
3) Enter the same password again.
4) Move to [Confirm] in the menu and press OK.
[Display Panel]
Select a brightness level of the front panel display.
• [Normal] - Normal brightness.
• [Dim] - To dim display.
[Auto Standby]
Turn on or off auto standby mode. It is an energy
saving feature.
• [On] - Switch to standby after 30 minutes
of inactivity (for example, in pause or stop
mode).
• [Off] - Disable auto s tandby mode.
[VCD PBC]
Turn on or off the content menu of VCDs/SVCDs
with PBC (playback control) feature.
• [On] - Display the index menu when you load
a disc for play.
• [Off] - Skip the menu and start play from the
first title.
Advanced setup
1 Press .
2 Select [Setup], and press OK.
3 Select [Advanced], and press .
4 Select an option, and press OK.
5 Select a setting, and press OK.
[BD-Live Security]
You can restrict internet access for BD-Live bonus
contents which are available to cer tain Blu-ray discs.
• [On] - Internet access is prohibited for all BD -
• [Off] - Internet access is per mit ted for all BD-
[Software Update]
Update the sof tware of this player (if a latest
version is available on Philips website) to enhance
the performance of this player.
• [USB] - Update software from the USB device
• [Network] - Update software from the
[Clear Memory]
Delete the BD-Live data which is downloaded
on the internal memory of this player or on the
connected USB flash drive.
On the connected USB flash drive, a folder named
“BUDA” is automatically created to store the
downloaded BD-Live data.
[Local Storage]
Select a location for downloaded BD-Live data to
be saved.
• [Internal] - Save the download on the internal
• [External] - Save the download on the
[DivX
Obtain the DivX
deregistration code.
To return to the previous menu, press •
To exit the menu, press •
Live contents.
Live contents.
which is connected to this player.
internet.
Note
For detailed software updating , see “Additional •
infor mation” > “Update software”.
memor y of this player.
connected USB flash drive.
®
VOD Code]
®
registration code or the
.
.
24
EN
Page 24
Tip
Use this player’s DivX registration cod e when you rent •
or purchase video f rom w ww.d ivx .com/vod. T he DivX
videos rented or purchased through the DivX
(Vi deo On D emand) ser vice can be played only on the
device to which it is re gistered.
[Version Info.]
Display the software version.
Tip
This information is need ed for you to check if a latest •
soft war e version is availa ble at the Phil ips website so that
you can d ownload and insta ll on this playe r.
[Restore Default Settings]
Reset all the settings of this player to the factory
settings, except for [Parental Control] setting.
®
VOD
7 Additional Information
Update software
For software updates to enchance performance,
check the current software version of this player to
compare with the latest software (if available) at the
Philips website.
1 Press .
2 Select [Setup], and press OK.
3 Select [Advanced] > [Version Info.], and press
OK.
Update software via network
1
Set up the Internet connection (see “Get
started’ > “Set up a network ”).
2 In the Home menu, select [Setup] >
[Advanced] > [Software Update] >
[Network].
You are prompted to star t upgrading »
process if upgrade media is detected.
3 Follow the instructions on the TV screen to
confirm update operation.
When the software update is complete, the »
player automatically turns off and on again.
Update software via USB
1
Go to www.philips.com/support to check if
the latest software version is available for this
player.
2 Download the software into a USB flash drive:
a Un-zip the download, and make sure that
the un-zipped folder is named “UPG_
ALL”.
b Put the “ UPG_ ALL” folder in the root
directory.
3 Insert the USB flash drive to the (USB)
jack on this player.
4 In the Home menu, select [Setup] >
[Advanced] > [Software Update] > [USB].
5 Follow the instructions on the TV screen to
confirm update operation.
When the software update is complete, the »
player automatically turns off and on again.
English
Note
Do not turn off the power or re move the USB fla sh •
drive when s oft ware updating is in progr ess to prevent
possi ble damage of this player.
EN
25
Page 25
Care
Caution
Never u se solvents such as b enzene, thinner, cleaners •
available commer ciall y, or anti -st atic sprays inten ded
for discs.
Clean discs
Wipe the disc with a micro fibre cleaning cloth from
the centre to the edge in a straight line movement.
Specifications
Note
Specifications are subject to change without notice •
Video
Signal system: PAL / NTSC•
Composite video output: 1 Vp-p ( 75 ohm)•
Component video output: 480/576i, 480/576p, •
720p, 1080i
Y: 1 Vp-p (75 ohm)•
Pb: 0.7 V-pp (75 ohm)•
Pr: 0.7 V-pp (75 ohm)•
HDMI output 480p, 576p, 720p, 1080i, 1080p, •
1080p24
Audio
USB
Main unit
2 Channel analog output•
Audio Front L + R : 2 Vrms (> 1 kohm)•
Signal to noise ratio: > 120 dB•
Dynamic Range (1kHz): >100 dB•
Total harmonic distor tion: <90 dB•
7.1 Channel analog output•
Audio Front L + R : 2 Vrms (> 1 kohm)•
Audio Surrond L + R : 2 Vrms (> 1 kohm)•
Audio Center : 2 Vrms (> 1 kohm)•
Audio Subwoofer : 1.15 Vrms (> 1 kohm)•
Audio Rear L + R: 2 Vrms (> 1 kohm)•
Digital output: 0.5 Vp-p (75 ohm)•
Optical, Coaxial•
HDMI output•
Compatibility: Hi-Speed USB (2.0)•
Class support: UMS (USB Mass Storage Class)•
Power supply rating: AC 110-240V~, 50/60 Hz•
Power consumption: 30 W•
Power consumption in standby mode: < 0.2 W•
Dimensions (w x h x d): 435 x 70 x 260 (mm) •
Net Weight: 5.0 kg•
Accessories supplied
Remote control and bat teries•
Power cable•
Quick start guide•
User manual•
Laser Specification
Laser Type: •
BD Laser Diode: AlGaInN•
DVD Laser Diode: AlGaInP•
CD Laser Diode: AlGaInP•
Wave leng th: •
BD: 405 +5nm/-5nm•
DVD: 655 +10nm/-10nm•
CD: 790 +10nm/-20nm•
Output power: •
BD: Max. ratings: 20mW•
DVD: Max. ratings: 6mW•
CD: Max. ratings: 7mW•
EN
26
Page 26
8 Troubleshooting
Warning
Risk of elec tric shock . Neve r remove the casing of the •
player.
To keep the warranty valid, never try to repair the
player yourself.
If you have problems using this player, check the
following points before you request service. If you still
have a problem, register your player and get support
at www.philips.com/welcome.
Main unit
No reaction to the remote control.
Connect this player to the power outlet.•
Point the remote control at the IR sensor •
located on the front panel of this player.
Insert the batteries correctly.•
Insert new batteries in the remote control.•
Picture
No picture.
See TV manual for correct video input •
selec tion. Change the T V channel until you see
the Philips screen.
No picture on HDMI connection.
If this player is connected to an unauthorized •
display device with an HDMI cable, the audio/
video signal may not be output.
Check if the HDMI cable is faulty. Replace a •
new HDMI cable.
On the remote control, press •
press “731” (numeric buttons) to recover
picture display.
No high-definition video signal on the TV.
Make sure that the disc contains high-definition •
video.
Make sure that the TV supports high-definition •
video.
Blu-ray 3D effect is not seen on the TV.
3D option on this player is turned off. Enable •
3D output (see “Adjust settings” > “Video
setup” > [Blu-ray 3D video]).
Ensure that the disc title being played is Blu-ray •
3D compliant.
Ensure that the TV is 3D and HDMI compliant, •
and the TV is set to 3D mode (refer to the
TV’s user manual).
Ensure that the 3D glasses are activated (refer •
to the T V’s user manual).
and then
Sound
No audio output from the TV.
Ensure that the audio cables are connected to •
the audio input of the T V.
Assign the audio input of the T V to the •
corresponding video input. See the T V user
manual for details.
No audio output from the loudspeakers of the
audio device (home theater /amplifier/receiver).
Ensure that the audio cables are connected to •
the audio input of the audio device.
Turn on the audio device to its correct audio •
input source.
No 7.1 - channel audio from the loudspeaker of
the audio system.
Ensure that the disc contains 7.1 - channel •
audio.
Ensure that the audio device suppor ts 7.1 - •
channel audio.
Ensure that the audio format is supported •
by the disc and the connected audio device
(amplifier/receiver).
No sound on HDMI connection.
You may not hear any sound from the HDMI •
output if the connec ted device is non-HDCP
compliant or only DVI-compatible.
No secondary audio output for Picture-in-Picture
feature.
When • [Bitstream] under the [HDMI Audio]
or [Digital Audio] menu is selected, interactive
sound like secondary sound for Picture-inPicture feature is muted. Deselect [Bitstream].
Play
Disc cannot be played.
Ensure that the disc is correctly loaded.•
Ensure that this player supports the disc. See •
“Your Blu-ray disc player” > “Playable media”.
Ensure that this player supports the region •
code of the DVD or BD.
For DVD±RW or DVD±R, ensure that the •
disc is finalized.
Clean the disc. •
Data files (JPEG, MP3, WMA) cannot be played
or read.
Ensure that the data file was recorded in the •
UDF, ISO9660 or JOLIET format.
Ensure that the disc does not contain more •
than 9,999 files for DVD, and 999 files for CD.
Ensure that the JPEG file ex tension is.jpg, .JPG, •
.jpeg or .JPEG.
Ensure that the MP3/ WMA file ex tension •
is .mp3 or .MP3, and .wma or .WMA for
windows Media™ Audio.
English
EN
27
Page 27
DivX video files cannot be played.
Ensure that the DivX video file is complete. •
Ensure that the file name extension is correct. •
The contents of the USB flash drive cannot be read.
The USB flash drive format is not compatible •
with this player.
Maximum size of memor y suppor ted is •
160 GB.
‘No entry’ or ‘x’ sign appears on the TV.
The operation is not possible. •
EasyLink feature does not work.
Ensure that this player is connected to the •
Philips brand EasyLink TV and the [EasyLink]
in the menu is set to [On].
Unable to access BD-Live feature.
Check the network connection or make sure •
that the network has been set up (see “Get
started” > “Set up a network ”).
To free space, delete downloaded BD-Live •
data on the connected USB storage device
(see “Adjust settings” > “Advanced setup” >
[Clear Memory]).
Make sure that the BD disc suppor ts BD-Live •
feature.
Network
Wireless network is not found or distorted.
Microwave ovens, Dect phones or other •
wireless devices in your neighborhood might
disturb the wireless network.
Make sure that the firewalls in your networ k •
allow access to the wireless connection of this
player.
If the wireless network does not work •
properly in your home, tr y the wired network
connection (see “Get star ted” > “Set up a
network”).
Net TV does not work.
Check the router connection (refer to the user •
manual for the router).
Browse PC and Net TV work slowly.
Look in your wireless router’s user manual for •
information on indoor range, transfer rate and
other factors of signal quality.
You need a high speed Internet connection for •
your router.
9 Glossary
A
Aspect ratio
Aspect ratio refers to the width to height ratio of
TV screens. The r atio of a standard TV is 4:3, while
the ratio of a high-definition or wide TV is 16:9.
The letter box allows you to enjoy a picture with a
wider perspective on a standard 4:3 screen.
AVCHD
AVCHD is a format (standard) for high definition
video cameras that can be used to record and play
high-resolution HD images.
B
Blu-ray Disc (BD)
Blu-ray Disc is a nex t generation optical video
disc capable of storing five times more data than
a conventional DVD. The large capacity makes it
possible to benefit from the features such as highdefinition videos, multichannel surround sound,
inter active menus and so on.
BONUSVIEW
BonusView, also known as “Profile 1.1”. In
addition to basic playback and interactive features,
BonusView players introduced after 31st Oc tober,
2007 enables users to enjoy ‘Picture-in-Pic ture’
(PiP) and secondary audio features (useful
when playing games that use additional audio
stream while the movie is playing) on compatible
BonusView discs.
D
Digital Audio
Digital Audio is a sound signal that has been
converted into numerical values. Digital sound
can be transmitted through multiple channels.
Analogue sound can only be tr ansmitted through
two channels.
DivX Video-On-Demand
This DivX Certified
in order to play DivX Video-on-Demand ( VOD)
content. To generate the regis tration code, locate
the DivX VOD section in your device setup menu.
Go to vod.divx.com with this code to complete the
registration process and learn more about DivX
video.
®
device must be registered
EN
28
Page 28
Dolby Digital
A surround sound system developed by Dolby
Laboratories that contains up to six channels of
digital audio (front left and right, surround left and
right, center and subwoofer.)
DTS
Digital Theatre Systems. A surround sound system
for providing 5.1 channels of discrete digital audio
in consumer electronics products and software
content. It is not developed by Dolby Digital.
H
HDCP
High-bandwidth Digital Content Protection. This is
a specification that provides a secure transmission
of digital contents between dif ferent devices (to
prevent unauthorized copyright.)
HDMI
High-Definition Multimedia Interface (HDMI) is
a high-speed digital interface that can transmit
uncompressed high definition video and digital
multichannel audio. It delivers high quality picture
and sound quality, completely free from noise.
HDMI is fully backward-compatible with DVI.
As required by the HDMI standard, connecting to
HDMI or DVI products without HDCP (Highbandwidth Digital Content Protection) will result in
no Video or Audio output.
M
MP3
A file format with a sound data compression
system. MP3 is the abbreviation of Motion Picture
Experts Group 1 (or MPEG-1) Audio Layer 3. With
the MP3 format, one CD-R or CD-RW can contain
about 10 times more data than a regular CD.
P
PBC
Playback Control. A system where you navigate
through a Video CD/Super VCD with on-screen
menus that are recorded onto the disc. You can
enjoy interactive playback and search.
PCM
Pulse Code Modulation. A digital audio encoding
system.
R
Region code
A system that allows discs to be played only in the
region designated. This unit only plays discs that
have compatible region codes. You can find the
region code of your unit on the product label. Some
discs are compatible with more than one region (or
ALL regions.)
English
J
JPEG
A very common digital still picture format. A stillpicture data compression sys tem proposed by the
Joint Photogr aphic Expert Group, which features
small decrease in image quality in spite of its high
compression ratio. Files are recognized by their file
extension ‘.jpg’ or ‘.jpeg.’
L
LAN (Local Area Network)
A group of linked devices in a company, school
or home. Indicates the boundaries of a par ticular
network.
Local storage
This storage area is used as destination for storing
additional contents from BD-Live enabled BDVideo.
W
WMA
Windows Media™ Audio. Refers to an audio
compression technology developed by Microsoft
Corporation. WMA data can be encoded with
Windows Media player version 9 or Windows
Media player for Windows XP. Files are recognized
by their file extension ‘.wma.’
EN
29
Page 29
License Texts and Acknowledgements for any open source software used in
this Philips product
Instruc tions to obtain source code for this software can be found in the user manual.
1. U-boot
#
# (C) Copyright 2000 - 2008
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See le CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modif y it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either ver sion 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILIT Y or FITNESS FOR A PARTICUL AR PURPOSE. See the
# GNU Gener al Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Sof tware
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
A copy of the GPL is included below at item 2.
2. Linux kernel
NOTE! This copyright does *not* cover user programs that use kernel services by normal sys tem calls - this is
merely considered normal use of the kernel, and does *not* fall under the heading of “derived work”.
Also note that the GPL below is copyrighted by the Free Software Foundation, but the instance of code that it
refer s to (the linux kernel) is copyrighted by me and others who actually wrote it.
Also note that the only valid version of the GPL as far as the kernel is concerned is _this_ par ticular version of
the license (ie v2, not v2.2 or v3.x or whatever), unless explicitly otherwise stated.
----------------------------------------
GNU GENER AL PUBLIC LICENSE
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
675 Mass Ave, Cambridge, MA 02139, USA
Ever yone is permit ted to copy and distribute verbatim copies of this license document, but changing it is not
allowed.
The licenses for most sof tware are designed to take away your freedom to share and change it . By contrast ,
the GNU General Public License is intended to guarantee your freedom to share and change free sof tware--to
make sure the sof tware is free for all its users. This General Public License applies to most of the Free Software
Foundation’s software and to any other program whose authors commit to using it. (Some other Free Software
Foundation software is covered by the GNU Librar y General Public License instead.) You can apply it to your
programs, too.
When we speak of free sof tware, we are referring to freedom, not price. Our Gener al Public Licenses are
designed to make sure that you have the freedom to dis tribu te copies of free software (and charge for this
service if you wish), that you receive source code or can get it if you want it, that you can change the software or
use pieces of it in new free progr ams; and that you know you can do these things.
Linus Torvalds
Version 2, June 1991
Preamble
1
Page 30
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you
to surrender the rights. These res trictions translate to certain responsibilities for you if you dis tribute copies of
the sof tware, or if you modify it.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients
all the rights that you have. You must make sure that they, too, receive or can get the source code. And you
must show them these terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you
legal permission to copy, distribute and/or modify the software.
Also, for each author’s protec tion and ours, we want to make cer tain that everyone understands that there
is no warranty for this free software. If the sof tware is modied by someone else and passed on, we want its
recipients to know that what they have is not the original, so that any problems introduced by others will not
reect on the original authors’ reputations.
Finally, any free program is threatened cons tantly by software patents. We wish to avoid the danger that
redistributors of a free program will individually obtain patent licenses, in effec t making the program propr ietary.
To prevent this, we have made it clear that any patent must be licensed for everyone’s free use or not licensed at
all.
The precise terms and conditions for copying, distribution and modication follow.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains a notice placed by the copyright holder
saying it may be distributed under the terms of this General Public License. The “Program”, below, refers to
any such program or work , and a “work based on the Progr am” means either the Program or any derivative
work under copyright law: that is to say, a work containing the Progr am or a portion of it, either verbatim
or with modications and/or translated into another language. (Hereinafter, translation is included without
limitation in the term “modication”.) Each licensee is addressed as “you”.
Activities other than copying, distribution and modication are not covered by this License; they are outside
its scope. The act of running the Program is not restricted, and the output from the Program is covered only
if its contents constitute a work based on the Program (independent of having been made by r unning the
Program). Whether that is true depends on what the Program does.
1. You may copy and dis tribute verbatim copies of the Program’s source code as you receive it, in any medium,
provided that you conspicuously and appropr iately publish on each copy an appropriate copyright notice
and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any
warranty; and give any other recipients of the Program a copy of this License along with the Program.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty
protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus for ming a work based on the
Program, and copy and distribute such modications or work under the terms of Section 1 above, provided that
you also meet all of these conditions:
a) You must cause the modied les to carry prominent notices stating that you changed the les and the
date of any change.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived
from the Program or any par t thereof, to be licensed as a whole at no charge to all third parties under
the terms of this License.
c) If the modied program nor mally reads commands interac tively when run, you must cause it , when
started r unning for such interactive use in the most ordinary way, to print or display an announcement
including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you
provide a warranty) and that users may redistribute the program under these conditions, and telling
the user how to view a copy of this License. (Exception: if the Program itself is interac tive but does not
normally print such an announcement, your work based on the Program is not required to print an
announcement.)
These requir ements ap ply to the m odif ied wor k as a whole. If identifiable sectio ns of that wor k are
not derived from the Pr ogram, and can be r easonably considered independent and separate works in
themselves, then this License, and its terms, do not apply to those sections when you distribute them as
separ ate works. But when you distribute the same sections as par t of a whole which is a work based on the
Program, the distribution of the whole must be on the terms of this License, whose permissions for other
licensees ex tend to the entire whole, and thus to each and ever y par t regardless of who wrote it.
GNU GENER AL PUBLIC LICENSE
2
Page 31
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you;
rather, the intent is to exercise the right to control the distribution of derivative or collective works based
on the Program.
In addition, mere aggregation of another work not based on the Program with the Program (or with a work
based on the Program) on a volume of a storage or distribution medium does not bring the other work
under the scope of this License.
3. You may copy and dist ribu te the Program (or a work based on it , under Section 2) in obj ec t code or
executable form under the terms of Sections 1 and 2 above provided that you also do one of the following:
a) Accompa ny it with t he co mplete corresponding machine -readable so urce co de , whic h must be
distributed under the terms of Sections 1 and 2 above on a medium customarily used for software
interchange; or,
b) Accompany it with a written offer, valid for at least three year s, to give any third party, for a charge no
more than your cost of physically per for ming source distribution, a complete machine-readable copy
of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a
medium customarily used for software interchange; or,
c) Accompany it with the infor mation you received a s to the of fer to distribute corresponding source
code. ( This alternative is allowed only for noncommercial dis tribution and only if you received the
program in object code or executable form with such an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for making modications to it. For an
executable work, complete source code means all the source code for all modules it cont ains, plus any
associated interface definition f iles, plus the scripts used to contr ol compilation and ins tallation of the
executable. However, as a special exception, the source code distributed need not include anything that is
normally distributed (in either source or binary for m) with the major components (compiler, kernel, and so
on) of the operating system on which the executable runs, unless that component itself accompanies the
executable.
If distribution of executable or object code is made by of fering access to copy from a designated place, then
offering equivalent access to copy the source code from the same place counts as distribution of the source
code, even though third par ties are not compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this
License. Any attempt other wise to copy, modif y, sublicense or distribute the Program is void, a nd will
automatically terminate your rights under this License. However, parties who have received copies, or rights,
from you under this License will not have their licenses terminated so long as such par ties remain in full
compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing else gr ants you
permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if
you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the
Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying,
distributing or modif ying the Program or works based on it.
6. Each time you redis tribute the Program (or any work based on the Program), the recipient automatically
receives a license from the original licensor to copy, distribute or modify the Program subject to these terms
and conditions. You may not impose any further restrictions on the recipients’ exercise of the rights granted
herein. You are not responsible for enforcing compliance by third par ties to this License.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not
limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise)
that contradict the conditions of this License, they do not excuse you from the conditions of this License.
If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other
per tinent obligations, then as a consequence you may not distribute the Program at all. For example, if a
patent license would not per mit royalty-free redistribution of the Program by all those who receive copies
directly or indirectly through you, then the only way you could satisfy both it and this License would be to
refrain entirely from distribution of the Program.
If any por tion of this section is held invalid or unenforceable under any particular circumstance, the balance
of the section is intended to apply and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or
to contest validity of any such claims; this section has the sole purpose of protec ting the integrity of the
free soft ware dis tr ibution system, which is implemented by public license practices. Many people have
made generous contributions to the wide range of soft ware distributed through that system in reliance on
consistent application of that sys tem; it is up to the author/donor to decide if he or she is willing to distribute
software through any other system and a licensee cannot impose that choice.
3
Page 32
This sec tion is intended to make thoroughly clear what is believed to be a consequence of the rest of this
License.
8. If the distribution and/or use of the Progr am is restricted in certain countries either by patents or by
copyrighted interfaces, the original copyright holder who places the Program under this License may add an
explicit geographical distribution limitation excluding those countries, so that distribution is per mit ted only
in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in
the body of this License.
9. The Free Sof tware Foundation may publish revised and/or new versions of the General Public License from
time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.
Each ver sion is given a distinguishing ver sion number. If the Program specif ies a version number of this
License which applies to it and “any later version”, you have the option of following the terms and conditions
either of that version or of any later version published by the Free Sof tware Foundation. If the Program
does not specify a version number of this License, you may choose any version ever published by the Free
Software Foundation.
10. If you wish to incorporate par ts of the Program into other free programs whose distr ibution conditions are
different, write to the author to ask for permission. For software which is copyrighted by the Free Software
Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision
will be guided by the two goals of preser ving the free status of all derivatives of our free sof tware and of
promoting the sharing and reuse of soft ware generally.
NO WARRANTY
11. BECAUSE THE PROGRAM I S LICENSED FREE OF CHARGE, THERE IS NO WARR ANTY FOR THE
PROGRAM , TO T HE E X TENT PER MIT TED BY APPL IC ABLE LAW. E XCEP T WH EN OTHERWIS E
STATED I N WRIT I NG TH E COPYRIG HT HOL DER S AND/OR OT H ER PAR TIE S PROVI D E THE
PROG R AM “AS IS” WIT HOU T WARR AN T Y OF A NY K IND, EITHE R EXP RES SED OR I MPL IED,
INC LUDING , BUT NOT L I M I T ED TO, T HE IM PLIED WARR A N TIES OF MERC H A N TABILIT Y
AN D FIT NES S FOR A PARTIC ULAR P URPOSE . THE ENT IRE R I SK A S TO THE QUALIT Y AND
PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFEC TIVE,
YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY
COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIF Y AND/OR REDISTRIBUTE THE
PROGR AM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY
TO USE THE PROGR AM (INCLUDI NG BUT NOT LIMITED TO LOSS OF DATA OR DATA BEIN G
RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF
THE PROGRAM TO OPERATE WITH ANY OTHER PROGR AMS), EVEN IF SUCH HOLDER OR OTHER
PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
Appendix: How to Apply These Terms to Your New Programs
If you develop a new progr am, and you want it to be of the greatest possible use to the public, the best way to
achieve this is to make it free sof tware which everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest to attach them to the start of each source le
to most effectively convey the exclusion of warranty; and each le should have at least the “copyright” line and a
pointer to where the full notice is found.
<one line to give the program’s name and a brief idea of what it does.>
Copyright (C) 19yy <name of author>
This program is free software; you can redistribute it and/or modify it under the terms of the GNU Gener al
Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option)
any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even
the implied warr anty of MERCHANTABILITY or FITNESS FOR A PARTICUL AR PURPOSE. See the GNU
General Public License for more details.
You should have received a copy of the GNU General Public License along with this program; if not, write to the
Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
Also add information on how to contact you by electronic and paper mail.
4
Page 33
If the program is interactive, make it output a short notice like this when it starts in an interactive mode:
Gnomovision version 69, Copyright (C) 19yy name of author
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w’.
This is free software, and you are welcome to redistribute it under certain conditions; type `show c’ for
details.
The hypothetical commands `show w’ and `show c’ should show the appropriate parts of the General Public
License. Of cour se, the commands you use may be called something other than `show w’ and `show c’; they
could even be mouse-clicks or menu items--whatever suits your program.
You should also get your employer (if you work as a programmer) or your school, if any, to sign a “copyright
disclaimer” for the program, if necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision’ (which makes passes at
compilers) written by James Hacker.
<signature of Ty Coon>, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit incor por ating your progr am into proprietary programs. If your
program is a subroutine librar y, you may consider it more useful to permit linking proprietary applications with
the librar y. If this is what you want to do, use the GNU Library General Public License instead of this License.
3. Busybox, the Linux IR control package and SquashFS
Busybox, the Linux IR control package and SquashFS are subject to the GPL, a copy of which is included at item 2.
4. DirectFB, glibc, libusb-compat, libusb, e2fsprogs and mtd-utils
DirectFB glibc, libmtp, libusb and e2fsprogs are subject to the following license:
GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Sof tware Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Ever yone is permit ted to copy and distribute verbatim copies of this license document, but changing it is not
allowed.
[This is the rst released ver sion of the Lesser GPL . It also counts as the successor of the GNU Library Public
License, ver sion 2, hence the ver sion number 2.1.]
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contr ast, the
GNU General Public Licenses are intended to guarantee your freedom to share and change free sof tware--to
make sure the software is free for all its users.
This license, the Lesser General Public License, applies to some specially designated software packages--typically
libraries--of the Free Sof tware Foundation and other authors who decide to use it . You can use it too, but we
suggest you rst think carefully about whether this license or the ordinar y General Public License is the better
strateg y to use in any par ticular case, based on the explanations below.
When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses
are designed to make sure that you have the freedom to distribute copies of free software (and charge for this
service if you wish); that you receive source code or can get it if you want it; that you can change the software
and use pieces of it in new free programs; and that you are infor med that you can do these things.
To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask
you to surrender these r ights. These restric tions tr anslate to cer tain responsibilities for you if you distribute
copies of the librar y or if you modify it.
For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the
rights that we gave you. You must make sure that they, too, receive or can get the source code. If you link other
code with the library, you must provide complete object les to the recipients, so that they can relink them with
the library after making changes to the libr ary and recompiling it. And you must show them these terms so they
know their rights.
We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license,
which gives you legal permission to copy, distribute and/or modif y the library.
To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also,
if the librar y is modied by someone else and passed on, the recipients should know that what they have is
5
Page 34
not the original ver sion, so that the original author’s reputation will not be affected by problems that might be
introduced by others.
Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that
a company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent
holder. Therefore, we insist that any patent license obtained for a version of the library mus t be consistent with
the full freedom of use specied in this license.
Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This
license, the GNU Lesser General Public License, applies to cer tain designated libraries, and is quite different
from the ordinar y Gener al Public License. We use this license for cer tain libraries in order to permit linking
those libraries into non-free programs.
When a program is linked with a librar y, whether statically or using a shared library, the combination of the two
is legally speaking a combined work, a derivative of the or iginal librar y. The ordinar y General Public License
therefore permits such link ing only if the entire combination ts its cr iteria of freedom. The Lesser Gener al
Public License permits more la x criteria for linking other code with the librar y.
We call this license the “Lesser” General Public License because it does Less to protect the user’s freedom than
the ordinary Gener al Public License. It also provides other free software developers Less of an advantage over
competing non-free programs. These disadvantages are the reason we use the ordinary General Public License
for many libraries. However, the Lesser license provides advantages in certain special circumstances.
For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain
library, so that it becomes a de-facto standard. To achieve this, non-free progr ams must be allowed to use the
library. A more frequent case is that a free librar y does the same job as widely used non-free libr aries. In this
case, there is little to gain by limiting the free librar y to free software only, so we use the Lesser General Public
License.
In other cases, permission to use a particular library in non-free programs enables a greater number of people
to use a large body of free software. For example, permission to use the GNU C Library in non-free programs
enables many more people to use the whole GNU operating system, as well as i ts variant, the GNU/Linux
operating system.
Although the Lesser General Public License is Less protective of the users’ freedom, it does ensure that the user
of a program that is linked with the Library has the freedom and the wherewithal to run that program using a
modied version of the Librar y.
The precise terms and conditions for copying, distribution and modication follow. Pay close attention to the
difference between a “work based on the library” and a “work that uses the library”. The former contains code
derived from the library, whereas the latter must be combined with the library in order to run.
GNU LESSER GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License Agreement applies to any software librar y or other program which contains a notice placed by
the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser
General Public License (also called “this License”).
Each licensee is addressed as “you”.
A “library” means a collection of software functions and/or data prepared so as to be conveniently linked
with application progr ams (which use some of those functions and data) to form executables.
The “Library”, below, refers to any such software library or work which has been distributed under these
terms. A “work based on the Library” means either the Librar y or any derivative work under copyright law:
that is to say, a work containing the Library or a portion of it, either verbatim or with modications and/or
translated straightforwardly into another language. (Hereinafter, translation is included without limitation in
the term “modication”.)
“Source code” for a work means the preferred form of the work for making modications to it . For a library,
complete source code means all the source code for all modules it contains, plus any associated inter face
denition les, plus the scripts used to control compilation and ins tallation of the library.
Activities other than copying, distribution and modication are not covered by this License; they are outside
its scope. The act of running a program using the Library is not restr icted, and output from such a program
is covered only if its contents constitute a work based on the Librar y (independent of the use of the Library
in a tool for writing it). Whether that is true depends on what the Librar y does and what the program that
uses the Libr ary does.
1. You may copy and distribute verbatim copies of the Librar y’s complete source code as you receive it, in any
medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright
6
Page 35
notice and disclaimer of warranty; keep intac t all the notices that refer to this License and to the absence of
any warranty; and distribute a copy of this License along with the Library.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty
protection in exchange for a fee.
2. You may modify your copy or copies of the Librar y or any portion of it, thus forming a work based on the
Library, and copy and distribute such modications or work under the terms of Section 1 above, provided
that you also meet all of these conditions:
a) The modied work must itself be a software library.
b) You must cause the les modied to carry prominent notices stating that you changed the les and the
date of any change.
c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms
of this License.
d) If a facility in the modied Library refers to a function or a table of data to be supplied by an application
program that uses the facility, other than as an argument passed when the facility is invoked, then you
must make a good faith ef for t to ensure that, in the event an application does not supply such function
or table, the facility still operates, and per forms whatever part of its purpose remains meaningful.
(For example, a function in a library to compute square roots has a purpose that is entirely well-dened
independent of the application. Therefore, Subsection 2d requires that any application-supplied function
or table used by this function mus t be optional: if the application does not supply it, the square root
function must still compute square roots.)
These requirements apply to the modied work as a whole. If identiable sec tions of that work are not
derived from the Library, and can be reasonably considered independent and separate works in themselves,
then this License , and its ter ms, do not apply to those sec tions when you distribute them as separate
works. But when you distribute the same sections as par t of a whole which is a work based on the Library,
the distribution of the whole must be on the terms of this License, whose permissions for other licensees
extend to the entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you;
rather, the intent is to exercise the right to control the distribution of derivative or collective works based
on the Library.
In addition, mere aggregation of another work not based on the Libr ary with the Librar y (or with a wor k
based on the Library) on a volume of a storage or distribution medium does not bring the other work under
the scope of this License.
3. You may opt to apply the ter ms of the ordinary GNU General Public License ins tead of this License to a
given copy of the Librar y. To do this, you must alter all the notices that refer to this License, so that they
refer to the ordinary GNU General Public License, ver sion 2, instead of to this License. (If a newer version
than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version
instead if you wish.) Do not make any other change in these notices.
Once this change is made in a given copy, it is irreversible for that copy, so the ordinar y GNU General Public
License applies to all subsequent copies and derivative works made from that copy.
This option is useful when you wish to copy part of the code of the Library into a program that is not a
library.
4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code
or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the
complete cor responding machine-readable source code, which must be distribu ted under the terms of
Sections 1 and 2 above on a medium customarily used for software interchange.
If distribution of objec t code is made by offering access to copy from a designated place, then offering
equivalent access to copy the source code from the same place satises the requirement to distribute the
source code, even though third par ties are not compelled to copy the source along with the object code.
5. A program that contains no derivative of any portion of the Libr ary, but is designed to work with the Libr ary
by being compiled or linked with it, is called a “work that uses the Librar y”. Such a work, in isolation, is not a
derivative work of the Library, and therefore falls outside the scope of this License.
However, linking a “work that uses the Library” with the Libr ary creates an executable that is a derivative
of the Library (because it contains portions of the Library), rather than a “work that uses the library”. The
executable is therefore covered by this License.
Section 6 states terms for distribution of such executables.
When a “work that uses the Librar y” uses material from a header le that is part of the Libr ary, the object
code for the work may be a der ivative wor k of the Library even though the source code is not.
7
Page 36
Whether this is true is especially signicant if the work can be linked without the Libr ary, or if the work is
itself a librar y. The threshold for this to be true is not precisely dened by law.
If such an objec t f ile uses only numer ic al par ameter s, data structur e layouts and accessors , and small
macros and small inline functions (ten lines or less in length), then the use of the object le is unrestricted,
regardless of whether it is legally a derivative work. (Executables containing this objec t code plus por tions of
the Library will still fall under Section 6.)
Otherwise, if the work is a derivative of the Library, you may distribute the objec t code for the wor k under
the terms of Section 6.
Any executables containing that work also fall under Section 6, whether or not they are linked directly with
the Library itself.
6. As an exception to the Sections above, you may also combine or link a “work that uses the Library” with the
Library to produce a work containing por tions of the Library, and distribute that work under ter ms of your
choice, provided that the terms permit modication of the wor k for the customer’s own use and reverse
engineering for debugging such modications.
You must give prominent notice with each copy of the work that the Library is used in it and that the Library
and its use are covered by this License. You must supply a copy of this License. If the wor k during execution
displays copyright notices, you must include the copyright notice for the Library among them, as well as a
reference directing the user to the copy of this License. Also, you must do one of these things:
a) Accompany the work with the complete corresponding machine-readable source code for the Library
including whatever changes were used in the work (which must be distributed under Sections 1 and 2
above); and, if the work is an executable linked with the Library, with the complete machine-readable
“work that uses the Library”, as object code and/or source code, so that the user can modif y the Library
and then relink to produce a modied executable containing the modied Library. (It is understood
that the user who changes the contents of denitions les in the Library will not necessarily be able to
recompile the application to use the modied denitions.)
b) Use a suitable shared library mechanism for linking with the Librar y. A suitable mechanism is one that
(1) uses at run time a copy of the library already present on the user’s computer system, rather than
copying library functions into the executable, and (2) will operate proper ly with a modied version
of the librar y, if the user installs one, as long as the modied version is interface-compatible with the
version that the work was made with.
c) Accompany the work wi th a writ ten offer, valid for at leas t three years, to give the same user the
materials specif ied in Subsection 6a, above, for a charge no more than the cost of performing this
distribution.
d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent
access to copy the above specied materials from the same place.
e) Verify that the user has already received a copy of these materials or that you have already sent this user
a copy.
For an executable, the required form of the “work that uses the librar y” mus t include any data and utility
programs needed for reproducing the executable from it. However, as a special exception, the materials to
be distributed need not include anything that is normally distributed (in either source or binar y form) with
the major components (compiler, kernel, and so on) of the operating system on which the executable runs,
unless that component itself accompanies the executable.
It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do
not normally accompany the operating system. Such a contradiction means you cannot use both them and
the Library together in an executable that you distribute.
7. You may place librar y facilities that are a work based on the Library side-by-side in a single library together
with other library facilities not covered by this License, and dis tribute such a combined libr ary, provided that
the separate distribution of the work based on the Library and of the other library facilities is otherwise
permitted, and provided that you do these two things:
a) Accompany the combined library with a copy of the same work based on the Librar y, uncombined with
any other library facilities. This must be distributed under the terms of the Sections above.
b) Give prominent notice with the combined librar y of the fact that par t of it is a work based on the
Library, and explaining where to nd the accompanying uncombined form of the same work.
8. You may not copy, modify, sublicense, link with, or distribute the Libr ary except as expressly provided under
this License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void,
and will automatically terminate your rights under this License. However, parties who have received copies,
or rights, from you under this License will not have their licenses ter minated so long as such par ties remain
in full compliance.
8
Page 37
9. You are not required to accept this License, since you have not signed it. However, nothing else grants you
permission to modify or distribute the Library or its derivative works. These actions are prohibited by law
if you do not accept this License. Therefore, by modifying or distributing the Library (or any work based
on the Librar y), you indicate your acceptance of this License to do so, and all its terms and conditions for
copying, distributing or modifying the Library or works based on it.
10. Each time you r edistribute the Library (or any work based on the Library), the recipie nt automatically
receives a license from the original licensor to copy, distribute, link with or modify the Library subject to
these terms and conditions. You may not impose any further restrictions on the recipients’ exercise of the
rights granted herein.
You are not responsible for enforcing compliance by third parties with this License.
11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not
limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise)
that contradict the conditions of this License, they do not excuse you from the conditions of this License.
If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other
per tinent obligations, then as a consequence you may not distribute the Libr ar y at all. For example, if a
patent license would not permit royalty-free redistribution of the Library by all those who receive copies
directly or indirectly through you, then the only way you could satisfy both it and this License would be to
refrain entirely from distribution of the Library.
If any por tion of this section is held invalid or unenforceable under any particular circumstance, the balance
of the section is intended to apply, and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims
or to contest validity of any such claims; this section has the sole purpose of protec ting the integrity of
the free software distribution system which is implemented by public license practices. Many people have
made generous contributions to the wide range of soft ware distributed through that system in reliance on
consistent application of that sys tem; it is up to the author/donor to decide if he or she is willing to distribute
software through any other system and a licensee cannot impose that choice.
This sec tion is intended to make thoroughly clear what is believed to be a consequence of the rest of this
License.
12. If t he distribu tion and/or use of the Libr ar y is rest ricted in certa in cou nt ries ei th er by patents or by
copyrighted interfaces, the original copyright holder who places the Library under this License may add an
explicit geographical distribution limitation excluding those countries, so that distribution is per mit ted only
in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in
the body of this License.
13. The Free S of tware Foundation may publish revised and/or new versions of the Lesser General Public
License from time to time. Such new versions will be similar in spirit to the present version, but may differ in
detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Library species a version number of this License
which applies to it and “any later ver sion”, you have the option of following the terms and conditions either
of that ver sion or of any later version published by the Free Sof tware Foundation. If the Libr ary does
not specify a license version number, you may choose any version ever published by the Free Sof tware
Foundation.
14. If you wish to incorporate parts of the Librar y into other free programs whose distribution conditions are
incompatible with these, write to the author to ask for permission. For software which is copyrighted by
the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for
this. Our decision will be guided by the two goals of preserving the free status of all der ivatives of our free
software and of promoting the sharing and reuse of sof tware generally.
NO WARRANTY
15. BECAUS E T HE LIB R ARY IS L ICENSED FR EE OF CHARGE, THERE IS NO WARR ANT Y FO R THE
LIBRARY, TO THE EXTENT PERMIT TED BY APPLIC ABLE L AW. EXCEPT WHEN OTHERWISE STATED
IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY “AS IS”
WITHOUT WARR ANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILIT Y AND FITNESS FOR A PARTICUL AR
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH
YOU. SHOU LD THE LIBR ARY PROVE DEFEC TIVE, YOU A SSUME THE COST OF ALL NECESSARY
SERVICING , REPAIR OR CORRECTION.
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE L AW OR AGREED TO IN WRITING WILL ANY
COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIF Y AND/OR REDISTRIBUTE THE
LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY
9
Page 38
TO U SE T HE L IBR ARY (IN CLUDI NG B UT N OT LIMITED TO LOSS OF DATA OR DATA B EIN G
RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF
THE LIBR ARY TO OPER ATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER
PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Libraries
If you develop a new libr ary, and you want it to be of the greatest possible use to the public, we recommend
making it free sof tware that everyone can redistribute and change. You can do so by permitting redistribution
under these terms (or, alternatively, under the terms of the ordinary General Public License).
To apply these terms, attach the following notices to the library. It is safest to attach them to the star t of each
source le to most effectively convey the exclusion of war ranty; and each le should have at least the “copyright”
line and a pointer to where the full notice is found.
<one line to give the libr ary’s name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General
Public License as published by the Free Soft ware Foundation; either version 2.1 of the License, or (at your
option) any later version.
This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the
implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICUL AR PURPOSE. See the GNU Lesser
General Public License for more details.
You should have received a copy of the GNU Lesser General Public License along with this library; if not, write
to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Also add information on how to contact you by electronic and paper mail.
You should also get your employer (if you work as a programmer) or your school, if any, to sign a “copyright
disclaimer” for the library, if necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob’ (a libr ary for tweaking knobs) writ ten
by James Random Hacker.
<signature of Ty Coon>, 1 April 1990
Ty Coon, President of Vice
That’s all there is to it!
5. IJG: JPEG software decoder
The authors make NO WARRANT Y or representation, either express or implied, with respec t to this software,
its quality, accuracy, merchantability, or tness for a particular purpose. This sof tware is provided “AS IS”, and
you, its user, assume the entire risk as to its quality and accuracy.
This software is copyright (C) 1991-1998, Thomas G . Lane.
All Rights Reser ved except as specied below.
Permission is hereby gr anted to use, copy, modify, and dis tribute this sof tware (or por tions thereof ) for any
purpose, without fee, subject to these conditions:
(1) If any part of the source code for this software is distributed, then this README le must be included, with
this copyright and no-warranty notice unaltered; and any additions, deletions, or changes to the original les
must be clear ly indicated in accompanying documentation.
(2) If only executable code is distributed, then the accompanying documentation must state that “this software
is based in par t on the work of the Independent JPEG Group”.
(3) Permission for use of this software is granted only if the user accepts full responsibility for any undesirable
consequences; the author s accept NO LIABILITY for damages of any kind.
6. WPA Supplicant
Copyright (c) 2003-2009, Jouni Malinen <j@w1.> and contributors
All Rights Reser ved.
Redistribution and use in source and binary forms, with or without modication, are permitted provided that
the following conditions are met:
10
Page 39
1. Re distribu tions of source code mus t retain t he above copyright notice, this lis t of conditions and the
following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other materials provided with the dis tribution.
3. Neither the name(s) of the above-listed copyright holder(s) nor the names of its contributor s may be used
to endorse or promote products derived from this soft ware without specic prior written permission.
TH I S SOF TWARE IS PR OV I DED BY THE C OPY R I GHT H O LDER S AND CONTRIB U TO R S “AS IS”
AND AN Y E XPRESS OR I MPLIED WARRANTIES, IN CLUDING , BUT NOT LIMITED TO, T HE IMPLIED
WARRANTIES OF MERCHANTABILIT Y AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCL AIMED.
IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTOR S BE LIABLE FOR ANY DIREC T,
INDIRECT, I NCIDENTAL, SPECIAL, EXEMPL ARY, OR CONSEQU ENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILIT Y, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
7. Unicode Bidirectional Algorithm
For the general privacy policy governing access to this site, see the Unicode Privacy Policy. For trademark usage,
see the Unicode Consortium® Trademarks and Logo Policy.
Notice to End User: Terms of Use
Carefully read the following legal agreement (“Agreeme nt”). Use or copying of the soft ware and /or codes
provided with this agreement ( The “Sof tware”) constitutes your acceptance of these terms
Unicode Copyright.
Copyright © 1991-2009 Unicode, Inc. All rights reserved.
Cer tain documents and les on this website contain a legend indicating that “Modication is permit ted.” Any
person is hereby authorized, without fee, to modify such documents and files to cr eate derivative works
conforming to the Unicode® Standard, subject to Terms and Conditions herein.
Any person is hereby authorized, without fee, to view, use, reproduce, and distribute all documents and les
solely for infor mational purposes in the creation of products supporting the Unicode Standard, subject to the
Terms and Conditions herein.
Further specications of rights and restrictions pertaining to the use of the par ticular set of data les known as
the “Unicode Character Database” can be found in Exhibit 1.
Each ver sion of the Unicode Standard has further specications of rights and restrictions of use. For the book
editions, these are found on the back of the title page. For the online edition, certain les (such as the PDF les
for book chapters and code charts) carry specic restrictions. All other les are covered under these general
Terms of Use. To request a permission to reproduce any par t of the Unicode Standard, please contact the
Unicode Consortium.
No license is granted to “mirror” the Unicode website where a fee is charged for access to the “mirror” site.
Modication is not permitted with respect to this document. All copies of this document must be verbatim.
Restricted Rights Legend. Any technical data or software which is licensed to the United States of America, its
agencies and/or instrumentalities under this Agreement is commercial technical data or commercial computer
soft ware developed exclusively at private expense as dened in FAR 2.101, or DFARS 252.227-7014 (June 1995),
as applicable. For technical data, use, duplication, or disclosure by the Government is subject to restrictions as
set for th in DFARS 202.227-7015 Technical Data , Commercial and Items (Nov 1995) and this Agreement. For
Software, in accordance with FAR 12-212 or DFARS 227-7202, as applicable, use, duplication or disclosure by the
Government is subject to the restrictions set forth in this Agreement.
Warranties and Disclaimers.
This publication and/or website may include technical or typographical errors or other inaccuracies . Changes
are per iodicall y a dd ed to th e i nfor ma tion he rein; these change s w ill be incor porated in new editions of
the publication and/or website. Unicode may make improvements and/or changes in the product(s) and/or
program(s) described in this publication and/or website at any time.
If this le has been purchased on magnetic or optical media from Unicode, Inc. the sole and exclusive remedy for
any claim will be exchange of the defective media within ninety (90) days of original purchase.
EXCEPT AS PROVIDED IN SECTION C.2, THIS PUBLICATION AND/OR SOF TWARE IS PROVIDED “AS IS”
WITHOUT WARRANTY OF ANY KIND EITHER EXPRESS, IMPLIED, OR STATUTORY, INCLUDING, BUT
NOT LIMITED TO, ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICUL AR PURPOSE,
11
Page 40
OR NON-INFRINGEMENT. UNICODE AND ITS LICENSORS ASSUME NO RESPONSIBILITY FOR ERRORS
OR OMISSIONS IN THIS PUBLICATION AND/OR SOFTWARE OR OTHER DOCUMENTS WHICH ARE
REFERENCED BY OR LINKED TO THIS PUBLICATION OR THE UNICODE WEBSITE.
Waiver of Damages. In no event shall Unicode or its licensor s be liable for any special, incidental, indirect or
consequential damages of any k ind, or any damages whatsoever, whether or not Unicode was advised of the
possibility of the damage, including, without limitation, those resulting from the following: loss of use, data or
prots, in connec tion with the use, modication or distribution of this information or its derivatives.
Trademarks.
Unicode and the Unicode logo are registered trademark s of Unicode, Inc.
This site contains product names and corporate names of other companies. All product names and company
names and logos mentioned herein are the trademarks or registered trademarks of their respective owners.
Other products and corporate names mentioned herein which are trademarks of a third par ty are used only for
explanation and for the owners’ benet and with no intent to infringe.
Use of third par ty products or infor mation referred to herein is at the user’s risk.
Miscellaneous.
Jur isdic tion and Venue. This server is operated from a location in the State of California, United States of
America. Unicode makes no representation that the materials are appropriate for use in other locations. If you
access this ser ver from other locations, you are responsible for compliance with local laws. This Agreement,
all use of this site and any claims and damages resulting from use of this site are governed solely by the laws of
the State of California without regard to any principles which would apply the laws of a different jurisdiction.
The user agrees that any disputes regarding this site shall be resolved solely in the courts located in Santa Clara
County, California . The user agrees said cour ts have personal jurisdiction and agree to waive any right to transfer
the dispute to any other forum.
Modication by Unicode Unicode shall have the right to modify this Agreement at any time by posting it to this
site. The user may not assign any par t of this Agreement without Unicode’s pr ior writ ten consent.
Taxes. The user agrees to pay any taxes ar ising from access to this website or use of the information herein,
except for those based on Unicode’s net income.
Severability. If any provision of this Agreement is declared invalid or unenforceable, the remaining provisions of
this Agreement shall remain in effect.
Entire Agreement. This Agreement constitutes the entire agreement between the par ties.
--------------------------------------------------------------------------------
EXHIBIT 1
UNICODE, INC. LICENSE AGREEMENT - DATA FILES AND SOFTWARE
Unicode Data Files include all data f iles under the directories http://www.unicode.org/Public/, http://www.
unicode.org/repor t s/, and ht tp://www.unicode.or g/cldr/da ta / . Unicode Sof tware includes any source code
published in the Unicode Standard or under the directories http://www.unicode.org/Public/, http://www.unicode.
org/reports/, and ht tp://www.unicode.org/cldr/data/.
NOTIC E TO USER: Car ef ully read the following le gal agreem ent. BY DOWN LOADI NG, INSTALLI NG ,
COPYING OR OTHERWISE USING UNICODE INC .’S DATA FILES (“DATA FILES”), AND/OR SOFT WARE
(“SOFT WARE”), YOU UNEQUIVOCALLY ACCEPT, AND AGREE TO BE BOUND BY, ALL OF THE TERMS
AND CONDITIONS OF THIS AGREEMENT. IF YOU DO NOT AGREE, DO NOT DOWNLOAD, INSTALL,
COPY, DISTRIBUTE OR USE THE DATA FILES OR SOFT WARE.
COPYRIGHT AND PERMISSION NOTICE
Copyright © 1991-2009 Unicode, Inc. All rights reser ved. Distributed under the Terms of Use in http://w ww.
unicode.org/copyright.html.
Permission is hereby granted, free of charge, to any person obtaining a copy of the Unicode data les and any
associated documentation (the “Data Files”) or Unicode sof t ware and any associated documentation (the
“Soft ware”) to deal in the Data Files or Soft ware without restriction, including without limitation the rights
to use, copy, modif y, merge, publish, distribute, and/or sell copies of the Data Files or Sof tware, and to permit
per sons to whom the Data Files or Software are fur nished to do so, provided that (a) the above copyright
notice(s) and this permission notice appear with all copies of the Data Files or Sof tware, (b) both the above
copyright notice(s) and this permission notice appear in associated documentation, and (c) there is clear notice
in each modied Data File or in the Sof tware as well as in the documentation associated with the Data File(s) or
Software that the data or software has been modied.
THE DATA FILES A ND SOF T WAR E ARE PROVIDED “AS IS”, WITHOUT WAR RANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICUL AR PUR POSE AND NONI NFRIN GEMENT OF THI RD PARTY R IG HTS. I N
NO EVENT SHALL THE COPYRIGHT HOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE LIAB LE
FOR ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
12
Page 41
WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
CONTR ACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
WITH THE USE OR PERFORMANCE OF THE DATA FILES OR SOFTWARE.
Except as contained in this notice, the name of a copyright holder shall not be used in adver tising or other wise
to promote the sale, use or other dealings in these Data Files or Sof tware without prior written authorization of
the copyright holder.
--------------------------------------------------------------------------------
Unicode and the Unicode logo are trademarks of Unicode, Inc., and may be registered in some jurisdic tions. All
other trademarks and registered trademark s mentioned herein are the proper ty of their respective owners.
--------------------------------------------------------------------------------
8. OpenSSL.
Open SSL is an Open Source toolkit implementing the Secure Sockets Layer (SSL v2/v3) and Transport Layer
Security (TLS v1) protocols as well as a full-strength general purpose cryptogr aphy library.
See http://www.openssl.org/, and in par ticular ht tp://www.openssl.org/source/license.html.
The license conditions are copied below.
The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original
SSLeay license apply to the toolkit.
See below for the actual license tex ts. Actually both licenses are BSD-style
Open Source licenses. In case of any license issues related to OpenSSL, please contact openssl-core@openssl.
org.
OpenSSL License
---------------
/* =====================================================
* Copyright (c) 1998-2008 The OpenSSL Project. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modication, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this lis t of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* 3. All advertising materials mentioning features or use of this
* software must display the following acknowledgment:
* “This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit. (http://www.openssl.org/)”
*
* 4. The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used to
* endorse or promote products derived from this software without
* prior written permission. For writ ten permission, please contact
* openssl-core@openssl.org.
*
* 5. Products der ived from this software may not be called “OpenSSL”
* nor may “OpenSSL” appear in their names without prior written
* permission of the OpenSSL Project.
*
* 6. Redistributions of any for m whatsoever must retain the following
* acknowledgment:
* “This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit (http://www.openssl.org/)”
*
* THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS’’ AND ANY
13
Page 42
* EXPRESSED OR IMPLIED WARR ANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARR ANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
* ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTR ACT, STRIC T LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
* ======================================================
*
* This produc t includes cr yptographic software written by Eric Young
* (eay@cryptsof t.com). This product includes sof tware written by Tim
* Hudson (tjh@cryptsoft .com).
*
*/
Original SSLeay License
-----------------------
/* Copyright (C) 1995-1998 Eric Young (eay@cr yptsoft.com)
* All rights reser ved.
*
* This package is an SSL implementation writ ten
* by Eric Young (eay@cr yptsoft.com).
* The implementation was written so as to conform with Netscapes SSL.
*
* This library is free for commercial and non-commercial use as long as
* the following conditions are aheared to. The following conditions
* apply to all code found in this distribution, be it the RC4, RSA,
* lhash, DES, etc., code; not just the SSL code. The SSL documentation
* included with this distribution is covered by the same copyright terms
* except that the holder is Tim Hudson (tjh@cryptsof t.com).
*
* Copyright remains Eric Young’s, and as such any Copyright notices in
* the code are not to be removed.
* If this package is used in a product, Eric Young should be given attribution
* as the author of the parts of the library used.
* This can be in the form of a textual message at progr am star tup or
* in documentation (online or textual) provided with the package.
*
* Redistribution and use in source and binary forms, with or without
* modication, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the copyright
* notice, this lis t of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this lis t of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* “This product includes cryptographic software written by
* Eric Young (eay@cryptsoft .com)”
* The word ‘cryptographic’ can be left out if the rouines from the librar y
* being used are not cryptogr aphic related :-).
* 4. If you include any Windows specic code (or a derivative thereof) from
* the apps direc tor y (application code) you must include an acknowledgement:
* “This product includes software written by Tim Hudson (tjh@cryptsof t.com)”
*
* THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS’’ AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
14
Page 43
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR
* CONTRIBUTORS BE LIABLE FOR ANY DIREC T, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILIT Y, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOF TWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*
* The licence and distribution terms for any publically available version or
* derivative of this code cannot be changed. i.e. this code cannot simply be
* copied and put under another distribution licence
* [including the GNU Public Licence.]
*/
9. Zlib general purpose compression library
See http://www.zlib.net/, and in particular http://www.zlib.net/zlib_license.html.
/* zlib.h -- interface of the ‘zlib’ general purpose compression librar y version 1.2.3, July 18th, 2005
Copyright (C) 1995-2005 Jean-loup Gailly and Mar k Adler
This sof tware is provided ‘as-is’, without any express or implied warranty. In no event will the authors be held
liable for any damages arising from the use of this software.
Permission is granted to anyone to use this software for any purpose, including commercial applications, and to
alter it and redistribute it freely, subject to the following restrictions:
1. The origin of this software must not be misrepresented; you must not claim that you wrote the original
software. If you use this software in a product, an acknowledgment in the product documentation would be
appreciated but is not required.
2. Al tered source versions must be plainly marked as such, and must not be misrepresented as being the
original sof tware.
3. This notice may not be removed or altered from any source distribution.
Jean-loup Gailly jloup @gzip.org
Mark Adler madler @alumni.caltech.edu
*/
10. cURL
COPYRIGHT AND PERMISSION NOTICE
Copyright (c) 1996 - 2009, Daniel Stenberg, <daniel@haxx.se>.
All rights reser ved.
Permission to use, copy, modify, and distribute this software for any pur pose with or without fee is hereby
granted, provided that the above copyright notice and this per mission notice appear in all copies.
THE SOFT WARE IS PROVIDED “AS IS”, WITHOUT WARR ANTY OF ANY K IND, EXPRESS OR IMPLIED,
IN CLUDI NG B U T NOT L IMI TED TO THE WARRAN TIE S OF M ERCHA NTABILI T Y, FITNE SS F OR A
PARTICUL AR PURPOSE AND NONINFRINGEMENT OF THIR D PART Y RIGHTS. IN NO EVENT SHALL
TH E AU THO R S OR COPY RIG H T HOL DER S BE LI ABLE FOR A NY CL A I M, DAMAGES OR OTHE R
LIABILITY, WHETHER IN AN ACTION OF CONTR ACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
OR IN CONNECTION WITH THE SOF TWARE OR THE USE OR OTHER DEALINGS IN THE SOFT WARE.
Except as contained in this notice, the name of a copyright holder shall not be used in adver tising or other wise
to promote the sale, use or other dealings in this Software without prior written authorization of the copyright
holder.
11. Freetype, a Free, High-Quality, and Portable Font Engine
The sof tware is based in part of the work of the FreeType Team.
See http://freetype.sourceforge.net/, and in par ticular http://freetype.sourceforge.net /FTL.TXT.
Portions of the relevant license conditions are copied below.
15
Page 44
The FreeType Project LICENSE 2006-Jan-27
Copyright 1996-2002, 2006 by David Turner, Rober t Wilhelm, and Werner Lemberg
…
1. No Warranty
------------------
TH E FREETYP E PROJ ECT I S PROVIDED `AS I S’ W ITH OUT WARRAN T Y OF ANY K IND, EI THER
EXPRESS OR IMPLIED, INCLUDING, BU T NOT LIMITED TO, WARRANTIES OF MERCHANTABILIT Y
AND FITNESS FOR A PART IC ULA R P URPOSE. IN NO EV EN T W ILL ANY OF THE AUTHORS OR
COPYRIGHT HOLDERS BE LIABLE FOR ANY DAMAGES CAUSED BY THE USE OR THE INABILITY TO
USE, OF THE FREETYPE PROJECT.
2. Redistribution
-------------------
This license grants a wor ldwide, royalty-free, per petual and irrevocable right and license to use, execute,
perform, compile, display, copy, create derivative works of, distribute and sublicense the FreeType Project (in
both source and object code forms) and derivative works thereof for any purpose; and to authorize others to
exercise some or all of the rights granted herein, subject to the following conditions:
…
o Redistribution in binary form must provide a disclaimer that states that the software is based in part of
the work of the FreeType Team, in the distribution documentation. We also encourage you to put an
URL to the FreeType web page in your documentation, though this isn’t mandatory.
…
12. International Components for Unicode
COPYRIGHT AND PERMISSION NOTICE
Copyright (c) 1995-2009 International Business Machines Corporation and others
All rights reser ved.
Permission is hereby gr anted, free of charge, to any person obtaining a copy of this software and associated
documentation les (the “Software”), to deal in the Software without restriction, including without limitation the
rights to use, copy, modif y, merge, publish, distribute, and/or sell copies of the Sof tware, and to permit persons
to whom the Sof tware is furnished to do so, provided that the above copyright notice(s) and this permission
notice appear in all copies of the Software and that both the above copyright notice(s) and this permission notice
appear in supporting documentation.
THE SOFT WARE IS PROVIDED “AS IS”, WITHOUT WARR ANTY OF ANY K IND, EXPRESS OR IMPLIED,
IN CLUDI NG B U T NOT L IMI TED TO THE WARRAN TIE S OF M ERCHA NTABILI T Y, FITNE SS F OR A
PARTICUL AR PURPOSE AND NONINFRINGEMENT OF THIR D PART Y RIGHTS. IN NO EVENT SHALL
THE COPYRIGHT HOLDER OR HOLDERS INCLUDED IN TH IS NOTICE BE LIAB LE FOR ANY CL AIM,
OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAG ES , OR ANY DAMAGES WH ATSOEVER
RESU LTING FROM LOSS OF USE, DATA OR PROF IT S, WHE THER IN AN AC TION OF CONTRACT,
NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE
OR PERFORMANCE OF THIS SOFTWARE.
Except as contained in this notice, the name of a copyright holder shall not be used in adver tising or other wise
to promote the sale, use or other dealings in this Software without prior written authorization of the copyright
holder.
13. Expat
Copyright (c) 1998, 1999, 200 0 Thai Open Source Software Center Ltd and Clark Cooper
Copyright (c) 2001, 2002, 2003, 20 04, 2005, 2006 Expat maintainers.
Permission is hereby gr anted, free of charge, to any person obtaining a copy of this software and associated
documentation les (the “Sof tware”), to deal in the Software without restriction, including without limitation
the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to
permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of
the Sof tware.
16
Page 45
THE SOFT WARE IS PROVIDED “AS IS”, WITHOUT WARR ANTY OF ANY K IND, EXPRESS OR IMPLIED,
IN CLUDI NG B U T NOT L IMI TED TO THE WARRAN TIE S OF M ERCHA NTABILI T Y, FITNE SS F OR A
PARTICULAR PURPOSE AND NONINFRINGEMENT.
IN N O E VEN T SHA L L THE AUTH ORS OR COPY R IGHT HOLD ERS BE L I ABLE FOR AN Y CL AIM ,
DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
ARIS ING FROM , O UT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTH ER
DEALINGS IN THE SOFTWARE.
14. DNS Resolver
The DNS resolver code, taken from BIND 4.9.5, is copyrighted both by UC Ber keley and by Digital Equipment
Corporation. The DEC portions are under the following license:
Portions Copyright (C) 1993 by Digital Equipment Corporation.
Permission to use, copy, modify, and distribute this software for any pur pose with or without fee is hereby
granted, provided that the above copyright notice and this permission notice appear in all copies, and that the
name of Digital Equipment Corporation not be used in advertising or publicity pertaining to distribution of the
document or sof tware without specic, written prior permission.
THE SOFT WARE IS PROVIDED ``AS IS’’ AND DIGITAL EQUIPMENT CORP. DISCLAIMS ALL WARR ANTIES
WITH REGARD TO THIS SOFT WARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILIT Y
AND F ITN ES S. I N NO EVENT SHALL DIGITAL E QUIPM ENT CORPORATION BE LIA BLE FO R AN Y
SPE CIAL , DIR EC T, INDIR EC T, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER
RESU LTING FROM LOSS OF USE, DATA OR PROF IT S, WHE THER IN AN AC TION OF CONTRACT,
NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE
OR PERFORMANCE OF THIS SOFTWARE.
15. getnameinfo, getaddrinfo
The les inet/getnameinfo.c and sysdeps/posix/getaddrinfo.c are copyright (C) by Craig Metz and are distributed
under the following license:
/* The Inner Net License, Version 2.00
The a uthor (s) gr ant pe rmiss io n for r edist rib ution an d use i n sour ce and bina r y forms, w ith or wit ho ut
modication, of the soft ware and documentation provided that the following conditions are met:
0. If you receive a version of the software that is specically labelled as not being for redistr ibution (check the
version message and/or README), you are not permitted to redistribute that version of the software in any
way or form.
1. All terms of the all other applicable copyrights and licenses must be followed.
2. Redistributions of source code must retain the author s’ copyr ight notice(s), this list of conditions, and the
following disclaimer.
3. Redistributions in binar y form must reproduce the author s’ copyright notice(s), this list of conditions, and
the following disclaimer in the documentation and/or other materials provided with the distribution.
4. [ The copyright holder has authorized the removal of this clause.]
5. Neither the name(s) of the author(s) nor the names of its contributors may be used to endorse or promote
products derived from this software without specic prior written permission.
THIS SOF TWARE IS PROVIDED BY ITS AUTHORS AND CONTR IBUTORS ``AS IS’’ AND ANY EXPRESS
OR IM PLI ED WARR ANTI ES, INCLUDI NG, BUT NOT L IMITE D TO, THE IMPLI ED WARR ANTI ES OF
MERCHANTABILIT Y AND FITNESS FOR A PARTICUL AR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE AUTHORS OR CONTRIBUTOR S BE LIABLE FOR ANY DIRECT, INDIRECT, I NCIDENTAL,
SP ECIA L , EXEMP L A RY, O R CON SEQU ENTI A L DAM AG ES (INC LU D ING, BUT N OT L IMIT ED TO,
PROC UREM ENT OF S UBST ITU TE GO ODS OR S ERVIC ES; LOSS O F USE , DATA , OR P ROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, S TRICT LIABILIT Y, OR TORT (INCLUDING NEG LIGENCE OR OTH ERWISE) ARISING IN
ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
If these license terms cause you a real problem, contact the author. */
17
Page 46
16. libpng
This copy of the libpng notices is provided for your convenience. In case of any discrepancy between this copy
and the notices in the le png.h that is included in the libpng distribution, the latter shall prevail.
COPYRIGHT NOTICE, DISCLAIMER, and LICENSE:
If you modify libpng you may insert additional notices immediately following this sentence.
This code is released under the libpng license.
libpng versions 1.2.6, August 15, 2004, through 1.2.41, December 3, 2009, are Copyright (c) 2004, 2006-2009
Glenn Randers-Pehrson, and are distributed according to the same disclaimer and license as libpng-1.2. 5 with
the following individual added to the list of Contributing Authors
Cosmin Truta
libpng versions 1.0.7, July 1, 200 0, through 1.2.5 - October 3, 2002, are
Copyright (c) 2000 -2002 Glenn Rander s-Pehrson, and are dis tribu ted according to the same disclaimer and
license as libpng-1.0.6 with the following individuals added to the list of Contributing Authors
Simon-Pierre Cadieux
Eric S . Raymond
Gilles Vollant
and with the following additions to the disclaimer:
There is no warranty against interference with your enjoyment of the library or against infringement. There
is no warr anty that our effor ts or the library will fulll any of your particular purposes or needs. This library is
provided with all faults, and the entire r isk of satisfac tor y quality, per formance, accuracy, and effort is with the
user.
libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000, are Copyright (c) 1998, 1999 Glenn Rander s-
Pehr son, and are dis tributed according to the same disclaimer and license as libpng-0.96, with the following
individuals added to the lis t of Contributing Authors:
Tom Lane
Glenn Randers-Pehrson
Willem van Schaik
libpng versions 0.89, June 1996, through 0.96, May 1997, are Copyright (c) 1996, 1997 Andreas Dilger
Distributed according to the same disclaimer and license as libpng-0.88, with the following individuals added to
the list of Contributing Authors:
John Bowler
Kevin Bracey
Sam Bushell
Magnus Holmgren
Greg Roelofs
Tom Tanner
libpng versions 0.5, May 1995, through 0.88, January 1996, are Copyright (c) 1995, 1996 Guy Eric Schalnat ,
Group 42, Inc.
For th e pur poses of this copyr ig ht and lice nse, “Contributing Authors” is defined as the following se t of
individuals:
Andreas Dilger
Dave Mar tindale
Guy Eric Schalnat
Paul Schmidt
Tim Wegner
The PNG Reference Library is supplied “AS IS”. The Contributing Authors and Group 42, Inc. disclaim all
warranties, expressed or implied, including, without limitation, the warranties of merchantability and of tness
for any purpose. The Contributing Authors and Group 42, Inc. assume no liability for direct, indirect, incidental,
special, exemplar y, or consequential damages, which may result from the use of the PNG Reference Librar y,
even if advised of the possibility of such damage.
18
Page 47
Permission is hereby granted to use, copy, modify, and distribute this source code, or portions hereof, for any
purpose, without fee, subject to the following res trictions:
1. The origin of this source code must not be misrepresented.
2. Altered versions must be plainly marked as such and must not be misrepresented as being the original source.
3. This Copyright notice may not be removed or altered from any source or altered source distribution.
The Contributing Author s and Group 42, Inc. specically permit, without fee , and encourage the use of this
source code as a component to supporting the PNG le format in commercial products. If you use this source
code in a product, acknowledgment is not required but would be appreciated.
A “png_get_copyright” function is available, for convenient use in “about” boxes and the like:
printf(“ %s”,png_get_copyright(NULL));
Also, the PNG logo (in PNG format, of course) is supplied in the les “pngbar.png” and “pngbar.jpg (88x31) and
“pngnow.png” (98x31).
Libpng is OSI Cer tied Open Source Software. OSI Certied Open Source is a cer tication mark of the Open
Source Initiative.
Glenn Randers-Pehrson
glennrp at users.sourceforge.net
December 3, 20 09
17. ezxml
This produc t contains ezxml, which is copyright 20 04, 2005 Aaron Voisine.
18. SQLite
A l l o f t h e d e l i v e r a b l e c o d e i n S Q L i t e h a s b e e n d e d i c a t e d t o t h e H Y P E R L I N K
“http://en.wikipedia.org/wiki/Public_Domain”public domain by the author s. All code authors, and representatives
of the companies they work for, have signed afdavits dedicating their contributions to the public domain and
originals of those signed afdavits are stored in a resafe at the main ofces of HYPERLINK “http://w ww.hwaci.
com”Hwaci. Anyone is free to copy, modify, publish, use, compile, sell, or dis tribute the original SQLite code,
either in source code form or as a compiled binary, for any purpose, commercial or non-commercial, and by any
means.
The previous paragraph applies to the deliverable code in SQLite - those parts of the SQLite library that you
actually bundle and ship with a larger application. Portions of the documentation and some code used as par t
of the build process might fall under other licenses. The details here are unclear. We do not worry about the
licensing of the docume ntation and build code so much because none of these things are part of the core
deliverable SQLite library.
All of the deliver able code in SQLite has been wri tten from scratch. No code ha s been taken from other
projects or from the open internet. Every line of code can be traced back to its original author, and all of those
authors have public domain dedications on le. So the SQLite code base is clean and is uncontaminated with
licensed code from other projects.
19. aes-src
Copyright (c) 1998-2008, Brian Gladman, Worcester, UK. All rights reserved.
LICENSE TERMS
The redistribution and use of this software (with or without changes) is allowed without the payment of fees or
royalties provided that:
1. source co de distr ib utions incl ud e t he above copy right notice, this list of co nd itions and t he following
disclaimer;
2. binary distributions include the above copyright notice, this list of conditions and the following disclaimer in
their documentation;
3. the name of the copyright holder is not used to endorse products built using this software without specic
written permission.
2010_BDP8000/9600_V2.0_SG
19
Page 48
English
NOTICE
SOFTWARE END USER LICENSE AGREEMENT
THIS SOFTWARE END USER LICENSE AGREEMENT (“THIS AGREEMENT”) IS A LEGAL AND BINDING
AGREEMENT BET WEEN YOU (EITHER AN INDIVIDUAL OR ENTITY) AND PHILIPS CONSUMER LIFESTYLE B.V.
A DUTCH LIMITED LIABILITY COMPANY, WITH ITS PRINCIPAL OFFICE AT HIGH TECH CAMPUS 37, 5656 AE
EINDHOVEN, THE NETHERL ANDS AND ITS SUBSIDIARY COMPANIES (INDIVIDUALLY AND COLLECTIVELY
“PHILIPS”). THIS AGREEMENT GIVES YOU THE RIGHT TO USE CERTAIN SOF TWARE (THE “SOFTWARE”)
INCLUDING USER DOCUMENTATION IN ELECTRONIC FORM WHICH MAY HAVE BEEN PROVIDED
SEPARATELY OR TOGETHER WITH A PHILIPS PRODUCT (THE “DEVICE”) OR A PC . BY DOWNLOADING ,
INSTALLING OR OTHERWISE USING THE SOFTWARE, YOU ACCEPT AND AGREE TO BE BOUND BY ALL
OF THE TERMS AND CONDITIONS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO THESE TERMS AND
CONDITIONS, DO NOT DOWNLOAD, INSTALL OR OTHERWISE USE THE SOF TWARE. IF YOU ACQUIRED THE
SOFTWARE IN TANGIBLE MEDIA E.G. CD WITHOUT THE OPPORTUNITY TO REVIEW THIS LICENSE AND DO
NOT ACCEPT THESE TERMS, YOU MAY RECEIVE A FULL REFUND OF THE AMOUNT, IF ANY, THAT YOU PAID
FOR THE SOFTWARE IF YOU RETURN THE SOFTWARE UNUSED WITH PROOF OF PAYMENT WITHIN 30 DAYS
FROM THE DATE OF PURCHASE.
1. Grant of License. This Agreement grants you a non-exclusive, nontransferable, non-sub licensable license to install
and use, on the Device or a PC, as applicable, one (1) copy of the specied ver sion of the Sof tware in object code
format as set out in the user documentation solely for your personal use. The Software is “in use” when it is loaded
into the temporar y or permanent memor y (i.e. RAM, hard disk, etc.) of the PC or the Device.
2. Ownership. The Software is licensed and not sold to you. This Agreement grants you only the right to use the
Software, but you do not acquire any rights, express or implied, in the Software other than those specied in this
Agreement. Philips and its licensor s retain all right, title, and interest in and to the Sof tware, including all patents,
copyrights, trade secrets, and other intellectual property rights incorporated therein. The Software is protected
by copyright laws, international treaty provisions, and other intellectual proper ty laws. Therefore, other than as
expressly set for th herein, you may not copy the Software without prior written authorization of Philips, except that
you may make one (1) copy of the Software for your back-up purposes only. You may not copy any printed materials
accompanying the Software, nor print more than one (1) copy of any user documentation provided in electronic
form, except that you may make one (1) copy of such printed materials for your back-up purposes only.
3. License Restrictions. Except as provided otherwise herein, you shall not rent, lease, sublicense, sell, assign, loan,
or otherwise transfer the Software. You shall not, and you shall not permit any third party, to reverse engineer,
decompile, or disassemble the Software, except to the extent that applicable law expressly prohibits the foregoing
restriction. You may not remove or destroy any product identication, copyright notices, or other proprietary
markings or restrictions from the Sof tware. All titles, trademarks, and copyright and restricted rights notices shall be
reproduced on your back up copy of the Software. You may not modify or adapt the Sof tware, merge the Sof tware
into another program or create derivative works based upon the Software.
4. Termination of certain functionality. The Sof tware may contain components of certain licensed software including
software licensed from Microsoft Corporation (“Microsoft”) which implements Microsoft’s digital rights management
technology for Windows Media. Content providers are using the digital rights management technology for Windows
Media (“WM-DRM”) to protect the integrity of their content (“ Secure Content”) so that their intellectual proper ty,
including copyright, in such content is not misappropriated. Your Device may also use WM-DRM software to transfer
or play Secure Content (“WM-DRM Software”). If the security of such WM -DRM Sof tware is compromised,
Microsoft may revoke (either on its own or upon the request of the owners of Secure Content (“Secure Content
Owners”)) the WM- DRM Software’s right to acquire new licenses to copy, store, transfer, display and/or play Secure
Content. Revocation does not alter the WM-DRM Sof tware’s ability to play unprotected content. A list of revoked
WM-DRM Software is sent to your PC and/or your Device whenever you download a license for Secure Content.
Microsoft may, in conjunction with such license, also download revocation lists onto your Device on behalf of Secure
Content Owners, which may disable your Device’s ability to copy, store, display, transfer, and/or play Secure Content.
Secure Content Owners may also require you to upgrade some of the WM-DRM components distributed with this
Software (“WM-DRM Upgrades”) before accessing their content. When you at tempt to play Secure Content, WMDRM Software built by Microsoft will notify you that a WM-DRM Upgrade is required and then ask for your consent
before the WM-DRM Upgrade is downloaded. WM-DRM Software built by Philips may do the same. If you decline
Page 49
the upgrade, you will not be able to access Secure Content that requires the WM-DRM Upgrade; however, you
will still be able to access unprotected content and Secure Content that does not require the upgrade. WM-DRM
features that access the Internet, such as acquiring new licenses and/or per forming a required WM -DRM Upgrade,
can be switched off. When these features are switched off, you will still be able to play Secure Content if you have
a valid license for such content already stored on your Device. However, you will not be able to use cer tain of the
WM-DRM Software features that require Internet access such as the ability to download content that requires the
WM-DRM Upgrade. All title and intellectual property rights in and to the Secure Content is the proper ty of the
respective Secure Content owners and may be protected by applicable copyright or other intellectual property
laws and treaties. This Agreement grants you no rights to use such Secure Content. To summarize, if the Software
contains Microsoft WM-DRM components – Secure Content you desire to download, copy, store, display,
transfer, and/or play is protected by the Microsoft WM -DRM components of the Software. Microsoft, Secure
Content Owners, or Secure Content distributors may deny you access, or restrict your access, to Secure
Content even after you have paid for, and/or obtained, it. Neither your consent nor the consent or approval of
Philips is necessary for any of them to deny, withhold or otherwise restrict your access to Secure Content. Philips
does not guaranty that you will be able to download, copy, store, display, transfer, and/or play Secure Content.
5. Open Source Software. (a) This software may contain components that are subject to open-source terms, as stated
in the documentation accompanying the Device. This Agreement does not apply to this software as such. (b) Your
license rights under this Agreement do not include any right or license to use, distribute or create derivative works of
the Sof tware in any manner that would subject the Sof tware to Open Source Terms. “Open Source Terms” means
the terms of any license that directly or indirectly (1) create, or purport to create, obligations for Philips with respect
to the Software and/or derivative works thereof; or (2) grant, or purport to grant, to any third party any r ights or
immunities under intellectual proper ty or proprietary rights in the Software or derivative works thereof.
6. Termination. This Agreement shall be effec tive upon installation or rst use of the Sof tware and shall terminate (i) at
the discretion of Philips, due to your failure to comply with any ter m of this Agreement; or (ii) upon destruction of all
copies of the Software and related materials provided to you by Philips hereunder. Philips’s rights and your obligations
shall survive the termination of this Agreement.
7. Upg rade s. Philips may, at its sole option, make upgrades to the Software available by general posting on a website or
by any other means or methods. Such upgrades may be made available pursuant to the terms of this Agreement or
the release of such upgrades to you may be subject to your acceptance of another agreement.
8. Support Services. Philips is not obligated to provide technical or other suppor t (“Support Services”) for the
Software. If Philips does provide you with Suppor t Services, these will be governed by separate terms to be agreed
between you and Philips.
9. Limited Software Warranty. Philips provides the Software ‘as is’ and without any warr anty except that the Software
will perform substantially in accordance with the documentation accompanying the Software for a period of one year
after your rst download, installation or use of the Software, whichever occurs rst. Philips’ entire liability and your
exclusive remedy for breach of this warranty shall be, at Philips’ option, either (i) return of the price paid by you for
the Sof tware (if any); or (b) repair or replacement of the Sof tware that does not meet the warranty set for th herein
and that is returned to Philips with a copy of your receipt. This limited warranty shall be void if failure of the Software
has resulted from any accident, abuse, misuse or wrongful application. Any replacement Software will be warr anted
for the remainder of the original warranty period or thirty (30) days, whichever is longer. This limited warranty shall
not apply to you if the Software was provided to you free of charge on an evaluation only basis.
10. NO OTHER WARRANTIES. EXCEPT AS SE T FORTH ABOVE, PHILIPS AND ITS LICENSORS DO NOT
WARRANT THAT THE SOF TWARE WILL OPER ATE ERROR FREE OR UNINTERRUPTED, OR WILL MEET
YOUR REQUIREMENTS. YOU ASSUME ALL RESPONSIBILITIES FOR SELEC TION OF THE SOFTWARE TO
ACHIE VE YOUR INTENDED RESULTS, AND FOR THE INSTALL ATION OF, USE OF, AND RESULTS OBTAINED
FROM THE SOFTWARE. TO THE MAXIMUM EX TENT PERMITTED BY APPLICABLE LAW, PHILIPS AND
ITS LICENSORS DISCL AIM ALL WARRANTIES AND CONDITIONS, WHETHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO THE IMPLIED WARR ANTIES OF MERCHANTABILITY, FITNESS FOR
A PARTICULAR PURPOSE, AND ACCURACY OR COMPLETENESS OF RESULTS WITH RESPECT TO THE
SOFTWARE AND THE ACCOMPANYING MATERIALS. THERE IS NO WARRANTY AGAINST INFRINGEMENT.
PHILIPS DOES NOT WARRANT THAT YOU WILL BE ABLE TO DOWNLOAD, COPY, STORE, DISPLAY,
TRANSFER, AND/OR PLAY SECURE CONTENT.
Page 50
11. LIMITATION OF LIABILITY. UNDER NO CIRCUMSTANCES WILL PHILIPS OR ITS LICENSORS BE LIABLE
FOR ANY CONSEQUENTIAL, SPECIAL, INDIRECT, INCIDENTAL OR PUNITIVE DAMAGES WHATSOE VER ,
INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS OR REVENUES, BUSINESS
INTERRUPTION, LOSS OF BUSINESS INFORMATION, LOSS OF DATA, LOSS OF USE OR OTHER PECUNIARY
LOSS, EVEN IF PHILIPS OR ITS LICENSORS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
IN NO EVENT SHALL PHILIPS’ OR ITS LICENSORS’ AGGREGATE LIABILITY FOR DAMAGES ARISING OUT OF
THIS AGREEMENT E XCEED THE GREATER OF THE PRICE ACTUALLY PAID BY YOU FOR THE SOF TWARE
OR FIVE POUNDS STERLING (5.00).
12. Trademarks. Certain of the product and Philips names used in this Agreement, the Software, and the printed user
documentation may constitute trademarks of the Philips, its licensors or other third par ties. You are not authorized
to use any such trademarks.
13. Export Administration. You agree that you will not directly or indirectly, export or re-export the Software to
any country for which the United States Expor t Administration Act, or any similar United States law or regulation
requires an export license or other U.S. Government approval, unless the appropriate expor t license or approval has
rst been obtained. By downloading or installing the Software you agree to abide by this Expor t provision.
14. Governing law. This Agreement is governed by the laws of your countr y of residence , without reference to its
conic t of laws principles. Any dispute between you and Philips regarding this Agreement shall be subject to the nonexclusive jurisdiction of the courts of your country of residence.
15. General. This Agreement contains the entire agreement between you and Philips and supersedes any prior
representation, under taking or other communication or advertising with respect to the Software and user
documentation. If any par t of this Agreement is held invalid, the remainder of this Agreement will continue in full
force and effect. This Agreement shall not prejudice the statutory rights of any party dealing as a consumer.
EUL A-E nglis h (UK )
September 2009
Page 51
© 2010 Koninklijke Philips Electronics N.V.
All rights reserved.
BDP9600_98_UM_V1.0_1041
Loading...