Philips BDP7300/98 User Manual

Register your product and get support at
www.philips.com/welcome
BDP7300
EN User manual 3
MS-MY Manual pengguna 3
ZH-TW 使用手冊 3
2
Contents
1 Important 4
Safety and important notice 4 Trademark notice 4
7 Additional Information 32
8 Troubleshooting 34
2 Your product 6
Feature highlights 6 Product overview 7
3 Connect 10
Connect video/audio cables 10 Route audio to other devices 12 Connect USB device 13 Connect LAN 14 Connect power cord 14
4 Get started 15
Insert the remote control batteries 15 Find the correct viewing channel 16 Use the Home menu 16 Select menu display language 16 Set up network 17 Use Philips EasyLink 17
5 Play 18
Play a disc 18 Play video 19 Play music 22 Play photo 23 Play from USB device 24
9 Glossary 36
English
Contents
6 Adjust settings 25
Video Setup 25 Audio Setup 27 Preference Setup 28 EasyLink Setup 29 Advanced Setup 30
EN
3
1 Important
Copyright notice
Safety and important notice
Warning
Risk of overheating! Never install the product in a confi ned space. Always leave a space of at least 4 inches around the product for ventilation. Ensure cur tains or other objec ts never cover the ventilation slots on the product. Never place the product , remote control or batteries near naked fl ames or other heat sources, including direct sunlight. Only use this product indoors. Keep this product away from water, moisture and liquid­ lled objects.
This product must not be exposed to dripping
or splashing. Never place any object or items that can damage this product (e.g., liquid fi lled objects, lighted candles). Never place this product on other electrical equipment. Keep away from this produc t during lightning storms. Where the mains plug or an appliance coupler is used as the disconnect device, the disconnec t device shall remain readily operable. Visible and invisible laser radiation when open. Avoid exposure to beam.
Recycle notice
This product incorporates copyright protection technology that is protected by method claims of cer tain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorised by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorised by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Trademark notice
HDMI, and HDMI logo and High-Defi nition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC.
Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries.
This electronic equipment contains a large number of materials that can be recycled or reused if disassembled by a specialized company. If you are disposing of an old machine, please take it to a recycling center. Please observe the local regulations regarding disposal of packaging materials, exhausted batteries and old equipment.
4
EN
The USB-IF Logos are trademarks of Universal Serial Bus Implementers Forum, inc.
DivX, DivX Ultra Certifi ed, and associated logos are trademarks of DivX, Inc. and are used under license. Offi cial DivX® Ultra Cer tifi ed product. Plays all versions of DivX ® video (including DivX ® 6) with enhanced playback of DivX® media fi les and the DivX® Media Format. Plays DivX® video with menus, subtitles and audio tracks.
‘DVD Video’ is a trademark of DVD Format/ Logo Licensing Corporation.
‘Blu-ray Disc’ and ‘Blu-ray Disc’ logo are trademarks.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872 & other U.S. and worldwide patents issued & pending. DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and HTS-HD Master Audio | Essential are trademarks of DTS, Inc. © 1996-2008 DTS, Inc. All Rights Reserved.
Java and all other Java trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and/or other countries.
BONUSVIEW™ ‘BD LIVE’ and ‘BONUSVIEW’ are trademarks of Blu-ray Disc Association.
‘AVCHD’ and ‘AVCHD’ logo are trademarks of Matsushita Electric Industrial Co., Ltd and Sony Corporation.
English
Important
‘x.v.Colour’ is a trademark of Sony Corporation.
CLASS 1
LASER PRODUCT
EN
5
2 Your product
Congratulations on your purchase, and welcome to Philips! To fully benefi t from the support that Philips offers, register your product at www.philips.com/welcome.
Feature highlights
Philips EasyLink Your product supports Philips EasyLink, which uses the HDMI CEC (Consumer Electronics Control) protocol. EasyLink-compliant devices that are connected through HDMI connectors can be controlled by a single remote control.
Note
Philips does not guarantee 100% interoperability with all HDMI CEC devices.
High-De nition entertainment Watch high-defi nition content disc with HDTV (High Defi nition Television). Connect it through a high speed HDMI cable (1.3 or category 2). You can enjoy excellent picture quality up to 1080p resolution with the frame rate of 24 frames per second with progressive scan output.
High delity 5.1 channel surround sound This product suppor ts the high-defi nition audio such as Dolby Digital Plus, Dolby TrueHD and DTS-HD Master Audio. To make the most of their high per formance, connect the BDP7300 to an analogue 5.1-channel AV receiver/amplifi er and speakers for full 5.1- channel surround sound.
BONUSVIEW/PIP (Picture-in-Picture) This is a new function of BD-Video that plays the primary video and secondary video simultaneously. Blu-ray players with Final Standard Profi le or Profi le 1.1 specs can play Bonus View features.
BD-Live Connect this player to the movie studios website via the L AN port to access a variety of up-to-date content (e.g. refreshed previews and exclusive special features). You can also enjoy nex t generation possibilities, such as ringtone/wallpaper downloads, peer-to-peer interactions, live events and gaming activities.
Upscale DVD for enhanced picture quality Watch the discs in the highest picture quality available for the HDTV. Video upscaling increases the resolution of standard defi nition disc to high defi nition up to 1080p over an HDMI connection. A highly detailed picture and increased sharpness delivers a more true­to-life picture.
6
EN
Region codes
You can play discs with the following region codes.
Product overview
Main unit
Region code
DVD BD
A
A
C
C
Country
Europe, United Kingdom
Asia Pacifi c, Taiwan, Korea
Latin America
Australia, New Zealand
Russia, India
China
a
bfc
d
a ( Standby-On )
Turns on the Blu-ray disc player or • switches to standby mode.
b Disc compartment c
( Open/Close )
Opens or closes the disc • compartment.
d IR sensor
Detects signals from the remote • control. Point the remote control at the IR sensor.
e Display panel f
( Play )
Star ts or resumes play.
g
( Pause )
Pauses play.• Moves the paused picture one step • forward.
h
USB jack
Connects a USB supported device.
English
ge
h
Your product
EN
7
Front panel display
LOADING Loading a disc. UNSUPP The disc is not suppor ted. BD Blu-ray disc is recognized. HDMI ERR The HDMI video resolution
FASTFWD Fast forward mode. FASTBWD Fast reverse mode. SLOWFWD Slow forward mode. SETTINGS Setup menu is displayed. HOME Home menu is displayed. CHAPTER Current chapter is in
RESUME Resume play is possible. DOLBY D Dolby Digital audio is being
DOLBY HD Dolby TrueHD audio is
UPGRADE Software upgrade is in
Description
is not supported by TV.
chapter repeat mode.
played.
being played.
progress.
Remote Control
a ( Standby-On )
Turns on the Blu-ray disc player or • switches to standby mode. When EasyLink is enabled, switches • the Blu-ray disc player and all EasyLink devices to standby. Note that you must press and hold ( Standby-On ) for at least 3 seconds for this to occur.
b BONUSVIEW
Turns on or off the secondary video • in a small screen window during play (applicable only to BD-video that supports the BONUSVIEW or Picture-In-Picture feature).
8
EN
c TOP MENU
BD : Displays the top menu.
DVD : Displays the title menu.
d
( Home menu )
Accesses the home menu.
e DISC MENU / POP-UP MENU
BD : Accesses or exits the pop-up menu.
DVD : Accesses or exits the disc menu.
f OK
Confi rms an entry or selection.
g
( Navigation buttons )
Navigates through the menus.
h
BACK
Returns to a previous screen.
i
( Previous/Next )
Skips to the previous or next title, • chapter, or track.
j
( Fast Backward / Fast Forward )
Press left and right for fast backward • or forward search.
k
( Mute )
Mutes or restores TV audio • (applicable only to Philips brand TV).
l
+/-
Increases and decreases TV volume • (applicable only to Philips brand TV).
m SUBTITLE
Selects the subtitle language on a • disc.
n AUDIO
Selects an audio language or channel • on a disc.
o Alphanumeric buttons
Selects an item to play.• Enters values or letters (using SMS • style entry).
p ( Open/Close )
Opens or closes the disc • compartment.
q TV CH +/-
Selects a TV channel (applicable only • to Philips brand TV).
r
( Stop )
Stops play.
s
( Pause )
Pauses play.• Moves the paused picture one step • forward.
t
( Play )
Star ts or resumes play
u INFO
Displays the current status or the • disc information.
v OPTIONS
Accesses options relating to the • current activity or selection.
w Color buttons
BD : Selects tasks or options.
x HDMI
Selects the video resolution of HDMI • output.
y REPEAT
Selects or turns off repeat or shuffl e mode.
English
Your product
EN
9
3 Connect
Make the following connections to use your Blu-ray disc player.
Basic connections:
Video• Audio• Power
Optional connections:
Route audio to other devices
Multi-channel receiver• Digital amplifi er/receiver
Analog stereo system• USB device• LAN (network)
Note
Refer to the type plate at the back or bottom of the product for identifi cation and supply ratings. Before you make or change any connections, ensure that all the devices are disconnected from the power outlet.
Connect video/audio cables
Connect this Blu-ray disc player to TV to view disc play. Select the best video connection that the TV can support.
Option 1: Connect to the HDMI jack (for • a HDMI, DVI or HDCP-compliant TV). Option 2: Connect to the component • video jacks (for a standard TV or Progressive Scan TV). Option 3: Connect to the video (CVBS) • jack (for a standard TV).
Note
You must connect this product directly to a TV.
Option 1: Connect to the HDMI jack
LAN
HDMI
DIGITAL AV OUTPUT
Tip
Different types of connectors may be used to connect this product to your TV, depending on availability and your needs. A comprehensive inter active guide to help you connec t your product is available at ww w.connectivityguide. philips.com.
10
EN
HDMI IN
1 Connect an HDMI cable (not supplied)
to the HDMI jack on this player and the HDMI input jack on the TV.
Tip
If the TV has a DVI connector only, connect via an HDMI/DVI adaptor. Connect an audio cable for sound output. You can optimize the video output. Press HDMI repeatedly to select the best resolution the TV can suppor t. Philips recommends HDMI category 2 cable, also known as High Speed HDMI cable, for optimal video and audio output. To play back the digital video images of a BD- video or DVD-video via an HDMI connec tion, it is necessar y that both the player and the display device (or an AV receiver/amplifi er) support a copyright protection system called HDCP (high-bandwidth digital content protection system). This type of connection provides best picture quality.
Note
HDMI cable is only supplied for cer tain region.
Option 2: Connect to the component video jack
LAN
Y
Pb
Pr
COMP OUT
PbY
Pr
AV OUTPUT
AUDIO IN
1 Connect the component video cables
(not supplied) to the Y Pb Pr jacks on this player and the COMPONENT VIDEO input jacks on the TV.
2 Connect the audio cable to the AUDIO
IN L/R - AV O UTP UT jacks on this player
and the AUDIO input jacks on the T V.
English
Connect
Note
The component video input jack on the TV might be labeled as Y Pb/Cb Pr/Cr or YUV. This type of connection provides good picture quality.
EN
11
Option 3: Connect to the Video (CVBS) jack
LAN
VIDEO
AV OUTPUT
Route audio to other devices
Route the audio from this Blu-ray disc player to other devices to enhance audio play.
Connect to multi-channel receiver
AV OUTPUT
VIDEO IN
AUDIO IN
1 Connect a composite video cable to the
VIDEO jack on this player and the VIDEO input jack on the T V.
2 Connect the audio cable to the AUDIO
L/R - AV OUT PUT jacks on this player and
the AUDIO input jacks on the TV.
Note
The video input jack on the TV might be labeled as A/V IN, VIDEO IN, COMPOSITE or BASEBAND. This type of connection provides standard picture quality.
LAN
5.1ch AU DIO OU T
1 Connect the 5.1-channel audio cables
(not supplied) to the 5.1 CH AUDIO OUTPUT jacks on this player and the
corresponding AUDIO input jacks on the device.
Tip
You can optimize the speaker output (see ‘Adjust settings’ > [Audio Setup] > [Speaker Setup] ).
12
EN
Loading...
+ 27 hidden pages