Philips BDP5180/05 user manual

Register your product and get support at
www.philips.com/welcome
BDP5180
EN User manual
Important notes for users in U.K.
Mains plug
This apparatus is fitted with an approved moulded plug. Should it become necessary to replace the main fuse, this must be replaced with a fuse of same value as indicated on the plug (example 10A).
1. Remove fuse cover and fuse.
2. The replacement fuse must comply with
BS1362 and have the A .S.T.A. approval mark. If the fuse is lost, contact your dealer in order to verify the correct type.
3. Refit the fuse cover.
In order to maintain conformit y to the EMC directive, the mains plug on this player must not be detached from the mains cord.
Copyright in the U.K.
Recording and playback of material may require consent. See Copyright Act 1956 and The Performer’s Protection Acts 1958 to 1972.
2
Contents
1 Important 4
Safety and important notice 4 Trademark notice 5
2 Your Blu-ray disc player 6
Feature highlights 6 Playable media 7 Product overview 7
3 Connect 8
Connect video/audio cables 8 Route audio to other devices 9 Connect a USB device 10 Connect a network 10 Connect power 10
4 Get started 11
Prepare the remote control 11 Find the TV input 11 Use the Home menu 11 Navigate a menu 11 Select a menu display language 11 Set up a network 12 Use Philips EasyLink 13
5 Play 14
Play a disc 14 Play from a USB device 14 Play video 14 Play photo 17 Play music 17 Browse PC 18 Browse Net TV 18
English
6 Adjust settings 20
Video setup 20 Audio setup 21 Network setup 21 EasyLink setup 22 Preference setup 22 Advanced setup 23
7 Additional Information 24
Update software 24 Care 25 Specifications 25
8 Troubleshooting 26
9 Glossary 27
EN
3
1 Important
Safety and important notice
Warning
Risk of overhe ating! Never install the prod uct in a confined space. Always l eave a space of at leas t 4 inche s around the product for ventilation . Ensur e curtains or other objects never cover the ve ntilation slots on the product.
Never p lace the produc t, remote control or batteries near naked flames or other heat sources, including direct sunlight.
Only use this pr oduct indoor s. Keep this product away from water, moisture and liquid-filled objects.
Never p lace this product on other elec tric al equipment . Keep away from this product during lig htning storms. Wher e the mai ns plug or a n appliance coupler is used as the disconnec t device, the disconnect device shall remain readily operable.
Visible and invisible laser r adiation when open. Avoid exposure to be am.
Health warning on viewing 3D
If you or your family has a history of epilepsy • or photosensitive seizures, consult a medical professional before exposing yourself to flashing light sources, rapid image sequences or 3D viewing. To avoid discomfort such as dizziness, headache • or disorientation, we recommend not watching 3D for extended periods of time. If you experience any discomfort, stop watching 3D and do not immediately engage in any potentially hazardous activity (for example driving a car) until your symptoms have disappeared. If symptoms persist, do not resume watching 3D without consulting a medical professional first. Parents should monitor their children during 3D • viewing and ensure they do not experience any discomfort as mentioned above. Watching 3D is not recommended for children under 6 years of age as their visual system is not fully developed yet.
This product complies with the radio interference requirements of the European Community.
Disposal of your old product and batteries
Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.
Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed with normal household waste. Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health.
CLASS 1
LASER PRODUCT
4
EN
Copyright notice
This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.
Open source software
Philips Electronics Hong Kong Ltd. hereby offers to deliver, upon request, a copy of the complete corresponding source code for the copyrighted open source software packages used in this product for which such offer is requested by the respective licenses. This offer is valid up to three years after product purchase to anyone in receipt of this information. To obtain source code, please contact open.source@philips.com. If you prefer not to use email or if you do not receive confirmation receipt within a week after mailing to this email address, please write to “Open Source Team, Philips Intellectual Property & Standards, P.O. Box 220, 5600 AE Eindhoven, The Netherlands.” If you do not receive timely confirmation of your letter, please email to the email address above.
Trademark notice
‘Blu-ray’, ‘Blu-ray Disc’, ‘Blu-ray Disc’ logo, ‘Blu-ray 3D’ and ‘Blu-ray 3D’ logo are the trademarks of Blu-ray Disc Association.
HDMI, and HDMI logo and High-Definition Multimedia Interface are trademark s or registered trademarks of HDMI licensing LLC.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,2 26,616; 6 ,4 87, 535 ; 7, 212,872; 7,3 33 ,929; 7,392,195; 7,272,567 & other U.S . and worldwide patents issued & pending. DTS and the Symbol are registered trademarks, & DTS-HD, DTS-HD Master Audio, and the DTS logos are trademarks of DTS, Inc. Product includes sof tware. © DTS, Inc. All Rights Reserved.
ABOUT DIVX PLUS™ HD: DivX® is a digital video format created by DivX, Inc. This is an official DivX
®
Certified DivX Plus™ HD video (H.264/.MK V) up to 1080p and premium content. Visit www.divx.com for more information and software tools to conver t your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified play DivX Video-on-Demand (VOD) content. To generate the registration code, locate the DivX VOD section in the device setup menu. Go to vod. divx.com with this code to complete the registr ation process and learn more about DivX VOD.
DivX associated logos are registered trademarks of DivX, Inc. and are used under license.
device that plays DivX video, including
®
device must be registered in order to
®
, DivX Cer tified®, DivX Plus™ HD and
English
DLNA®, the DLNA Logo and DLNA CERTIFIED® are tr ademarks, service mar ks, or certification marks of the Digital Living Network Alliance.
BONUSVIEW™
‘BD LIVE’ and ‘BONUSVIEW’ are trademarks of Blu-ray Disc Association.
EN
5
2 Your Blu-ray disc
‘DVD Video’ is a trademark of DVD For mat/Logo Licensing Corporation.
‘AVCHD’ and ‘AVCHD’ logo are trademarks of Matsushita Electric Industrial Co., Ltd and Sony Corporation.
Java and all other Java trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and/or other countries.
Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries.
player
Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers (e.g. product software upgrade), register your product at www.philips.com/welcome.
If you contact Philips, you will be asked for the model and serial number of this player. The model number and serial number are on the back of this player. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Feature highlights
For the best performance of this player, update the soft ware of this player regularly.
NetTV
Net TV brings you a wide range of online information and entertainment on your TV which is connected to this player. With Net TV you can enjoy some of the best websites tailored to fit your TV.
3D Blu-ray disc play
This player can play 3D Blu-ray discs and it provides a full HD 3D experience at home. Connect your player to a 3D-compliant TV with an HDMI cable, and wear 3D glasses that are compatible with the TV to enjoy excitement of the 3D world.
DLNA
Simply connect this player to your home network via the LAN jack or wirelessly with an optional Philips Wi-Fi USB adapter. You can stream your video and picture to this player and watch it directly on your TV.
DivX Plus HD
This player is a DivX Plus HD Certified device. It plays all DivX video including DivX Plus HD video files (H.264 video with the .mkv file extension and AAC audio) up to 1080p and premium Hollywood content.
High-Definition entertainment
Watch high-definition content disc with HDTV (High Definition Television). Connect it through a high speed HDMI cable (1.3 or category 2). You can enjoy excellent picture quality up to 1080p resolution with the frame rate of 24 frames per second with progressive scan output.
6
EN
BD-Live
Connect this player to the movie studios website via the LAN port or external Wi-Fi to access a variety of up-to-date content (e.g. refreshed previews and exclusive special features).
Playable media
This player can play:
BD-Video, BD-R/RE2.0, BD 3D• DVD, DVD-Video, DVD+R/+RW, DVD-R/-• RW, DVD+R/-R DL (Dual Layer) Video CD/SVCD• Audio CD, CD-R/CD-RW, MP3 media, WMA • media, JPEG files DivX (Ultra)/DivX Plus HD media, MKV media• USB flash drive
Region codes
You can play discs with the following region codes.
Region code Countries DVD Blu-ray
Europe, United Kingdom
B
Product overview
Main unit
f
g
h
Remote control
a
b c
d e
f
g
h
Start or resume play.
Pause play.
jack
Connect a USB device.
English
q
p
o n
m l
k
a
a
b Disc compartment c IR sensor
d Display panel e
Turn on this player or switch to standby • mode.
Detect signals from the remote control. • Always point the remote control at the IR sensor.
Open or close the disc compartment.
cd
i
efgb
h
j
a
b
c DISC MENU / POP-UP MENU
Turn on this player or switch to standby • mode. When EasyLink is enabled, press and • hold for at least three seconds to turn all connected HDMI CEC compliant devices to standby.
Access the home menu of this player.
BD: Access or exit the pop-up menu.
DVD: Access or exit the disc menu.
EN
7
d OK
e
f
g
h
i SUBTITLE
j AUDIO
k Alphanumeric buttons
l
m
n o TOP MENU
p
q Color buttons
Confirm an entry or selection.
Navigate through the menus.
BACK
Return to a previous display menu.
/
Skip to the previous or next title, chapter, • or track.
/
Search backward or forward.
Select a subtitle language on a disc.
Select an audio language or channel on a • disc.
Select an item to play.• Enter values.
Stop play.• Press and hold to open/close the disc • compartment.
Pause play.• Move the paused picture one step • forward.
Start or resume play.
BD: Display the top menu.
DVD: Display the title menu.
OPTIONS
Access options for the current activity or • selection.
BD: Select tasks or options.
3 Connect
Make the following connections to use this player.
Basic connections:
Video• Audio• Power
Optional connections:
Route audio to other devices
HDMI-compliant AV receiver/amplifier• Multi-channel AV amplifier/receiver• Digital AV amplifier/receiver
Analog stereo system• USB device• Wired/Wireless network
Note
Refer to the typ e plate at t he back or bottom of the product for identificatio n and supply rat ings.
Befor e you make o r change any connec tions , ensur e that all the devices a re disco nnected from the power o utlet .
Connect video/audio cables
Select the best video connection that the TV can support.
Option 1: Connect to the HDMI jack (for a HDMI, DVI or HDCP-compliant TV).
Option 2: Connect to the component video jacks (for a standard TV or Progressive Scan TV).
Option 3: Connect to the composite video jack (for a standard TV).
Option 1: Connect to the HDMI jack
HDMI IN
1 Connect an HDMI cable (not supplied) to:
EN
8
the HDMI jack on this player. the HDMI input jack on the TV.
Tip
If the T V has a DVI connec tor only, connect v ia an HDMI/DVI adaptor. Connect an audio cable for sou nd output.
If there is a blank screen under HDMI connection, on the remote control press and then press “731” (nume ric but tons) to recover pic ture display.
If this player con nect s to a TV compatible with 10 80p or 1080p/24Hz, Philips recommends HDMI categor y 2 cable, also k nown as High Speed HDM I cable, for optimal video and audio outpu t.
To play the digital video ima ges of a BD -video or DVD­video via an HDMI conne ction, it is necessar y that both this player and the displ ay device (or a n AV receiver/ amplifier) suppor t a copyright protection system call ed HDCP ( high- bandw idth digital content p rotec tion system).
This connection provides best picture quality.
Option 3: Connect to the composite video jack
AUDIO IN
VIDEO IN
English
Option 2: Connect to the component video jacks
PbY
Pr
AUDIO IN
1 Connect the component video cables (not
supplied) to:
the Y Pb/Cb Pr/Cr jacks on this product. the COMPONENT VIDEO input jacks on • the TV.
2 Connect the audio cables to:
the AV OUTPUT-L/R jacks on this product. the AUDIO input jacks on the TV.
Tip
The com ponent video input jack on the TV might be labeled as Y Pb Pr or YUV.
1 Connect a composite video cable to:
2 Connect the audio cables to:
Route audio to other devices
You can route the audio from this player to other devices.
Connect to an HDMI-compliant AV receiver/amplifier
1 Connect an HDMI cable (not supplied) to:
the VIDEO jack on this player. the VIDEO input jack on the TV.
the AV OUTPUT-L/R jacks on this player. the AUDIO input jacks on the TV.
Tip
The video input jack on t he TV might be lab eled as A/V IN, VIDEO IN, COMPOSITE or BASEB AND.
HDMI IN
the HDMI jack on this player. the HDMI jack input jack on the device.
EN
9
Tip
The HDMI connection provides best audio quality.
Connect to a digital AV amplifier/receiver
Connect to coaxial jack
COAXIAL
Note
Press , and select [browse USB] in the menu to access the content and play the fil es.
jack of this player.
Connect a USB device only to the
Phili ps does not guara ntee compatibi lity with all USB devices.
Connect a network
With a wired or wireless connection (see “Get started” > “Set up a network”), you can connect this player to:
the Internet (for software update/BD Live/• Net TV service). or a home network (to access media files • from a DLNA media server, e.g. PC).
1 Connect a coaxial cable (not supplied) to:
the COAXIAL jack on this player. the COAXIAL/DIGITAL input jack on the • device.
Connect an analogue stereo system
AUDIO IN
1 Connect the audio cables to:
the AV OUTPUT-L/Ron this player. the AUDIO input jacks on the device.
Connect a USB device
A USB device provides an additional memory to enjoy software updates and BD-Live.
1 Connect a USB device to the (USB) jack
on the front panel of this product.
Note
Internet access to Philips website for software update may not be a llowed, depending on th e route r you use or the Intern et Ser vice Provider ’s polic y. Contact your Internet Service Provider for more infor mation.
Connect power
Caution
Risk of player da mage! Ensure that the power supply voltage corr espon ds to the voltage printed on the bac k of the un it.
Befor e connecting t he AC power co rd, ens ure you have completed all other connections.
Note
The type plate is located on the back of the player.
1 Connect the AC power cable to:
this player.• the wall socket.
This player is ready to be set up for use. »
10
EN
4 Get started
Caution
Use of controls or adjustment s or per formance of proce dures other than herein may result in ha zardous radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in sequence.
1 Press to display the home menu.
To start disc play, select [play Disc]. To view the USB contents, select [browse USB]. To access the setup menus, select [Setup]. To access media files from a DLNA home • network media server (e.g. PC), select [browse PC]. To access the Net TV services on the • Internet, select [browse Net TV].
English
Prepare the remote control
1 Press and push the battery compartment to
slide it open (see “1” in the illustration).
2 Insert two AAA batteries with correct polarity
(+/-) as indicated.
3 Push and slide back the battery compartment
(see “3” in the illustration).
Note
If you ar e not going to use the r emote control fo r a long time , remove t he batterie s.
Do not mix batte ries (old and new or carbon and alkaline, etc.).
Batteries contain chemical substances, so they should be disposed of properly.
Find the TV input
1 Press to turn on this player. 2 Turn on the TV and switch to the video input
(refer to the TV user manual on how to select the A/V input).
Navigate a menu
1 When a menu is displayed, press the buttons on
the remote control to navigate.
Button Action
Move up or down.
Move left or right.
OK Confirm a selection.
Enter numbers/letters/ text.
Select a menu display language
Note
If this player is connected to a HDM I CEC compliant TV, skip this se tting. It swi tches au tomatically to the same OSD menu language as per your TV set ting (if the langu age set on T V is sup ported by this player).
1 In the Home menu, select [Setup] and press
OK.
2 Select [Preference], and press . 3 Select [Menu Language], and press .
Use the Home menu
EN
11
The language options may vary from • different regions.
4 Press to select a language, and press OK.
Set up a network
You can connect this product to the Internet (for software update and BD Live), or to a home network (to access media files from a DLNA media server, e.g. PC).
To access media files from your computer, you need to ensure:
a media server software (e.g. Windows Media • Player 11) is installed on your computer; and the media server software is configured • to enable media sharing (See the “Help” documentation from the media server software).
Set up a wired network
Note
Ensure that the network cables are properly connected.
1 Connect a network cable (not supplied) to:
the LAN port on this player. the LAN port on a router with Internet • connection.
2 To access media files from your computer,
connect the computer to the router.
3 Turn on this player, the computer and the
router.
Set up a wireless network
Note
For wireless connection, you need to use an optional Phili ps Wi-Fi USB adapter (nam ed WUB1110).
The Wi -Fi US B Adapte r (WU B1110) is not included. To purchase this adapter, visit shop.phili ps.com . If the Phili ps online shop is not available in your countr y, please contact Philips customer service. For contact details, go to www.philips.com/support.
1 Connect a Philips Wi-Fi USB adapter (named
WUB1110, separately sold) to the Wi-Fi port on the back of this product.
2 To access media files from you computer,
connect the computer to the router.
3 Turn on this product, the computer and the
router.
Philips WUB1110
Internet
BDP5180
BDP5180
router
12
EN
PC (DLNA)
Internet
router
PC (DLNA)
Install a network connection
For the first time you connect the network, install the network connection.
1 Set up a wired or wireless network. 2 Press to display the home menu. 3 Select [Setup] and press OK. 4 Select [Network], and press . 5 Select [Network Installation], and press OK.
6 Follow the on-screen instructions to complete
the network installation.
After the network installation completes, » you can access the services: browse Net TV, browse PC, BD-Live, software updates.
Tip
You can check the st atus of th e wired o r wirel ess connection of this product (see “Adjust settings” > “Network S etup” > [ View Net work Settings] or [View
Wireless Settings]).
One-touch play
1
Press (standby) to turn on this player.
The TV (if the TV supports one-touch play) » automatically turns on and switches to the correct video-in channel.
If a disc is loaded, disc play automatically » starts.
One-touch standby
1
Press and hold (standby) for more than
3 seconds.
All the connected devices (if the device » supports one-touch standby) automatically switch to standby.
Note
Phili ps does not guara ntee interoperability with all HDMI CEC devices.
English
Use Philips EasyLink
This player supports Philips EasyLink which uses the HDMI CEC (Consumer Electronics Control) protocol. You can use one single remote control to control EasyLink-compliant devices that are connected through HDMI connectors.
Note
To enable the Easy Link feature , you must turn on t he HDMI CEC operations on the T V and on other devices connected to T V. Refer to the TVs/devices manual for details.
EN
13
5 Play
Play a disc
Caution
Do not place any objects other than discs into the disc compartment.
1 Press on the front panel to open the disc
compartment.
You may also press and hold • remote control to open/close the disc compartment.
2 Insert a disc with its label facing up. 3 Press to close the disc compartment and start
disc play.
To view disc play, turn on the TV to the • video input. To stop disc play, press
Note
Check disc/file formats supported (see “Your Blu-ray disc player” > “Play able media”).
If the password entr y menu is displayed, enter the pass word before you ca n play the locked or r estr icted disc (see “Adjust settings” > “Preference Setup” > [Parental Control] ).
If you pause or stop a disc, the screen saver appears after 10 minutes of inactivi ty. To deact ivate the screen saver, press any but ton.
After you pause or stop a disc and no button is pressed with in 30 minutes, t his playe r automatically switches to standby.
Play from a USB device
Play or view media files on the following USB devices:
flash drive• memory card reader• HDD (This player can detect only a portable • hard disc drive with USB power peak current no more than 500mA.)
/ on the
.
1 Connect a USB device to the (USB) jack on
the front panel of this player.
2 Press , and select [browse USB], and press
OK.
A contents menu is displayed. »
3 Select a file to play, and press OK.
Play starts (see “Play video”, “Play photo”, » Play music” for details).
To stop play, press • device.
Note
Phili ps does not guara ntee compatibi lity with all USB devices.
Not all d igital cameras are suppor ted. Digital cam eras that require PC programme insta llatio n are not supported.
NTFS ( New Technology File Syste m) data for mat is not supported.
or remove the USB
Play video
Control video play
1
Play a title.
2 Use the remote control to control the play.
Button Action
Pause play.
Press repeatedly
forward play frame by frame. Start or resume play.
Stop play.
/
Skip to a previous/nex t title or chapter.
Search fast-backward or fast-forward.
/
Press repeatedly to change the search speed.
Press once
repeatedly
backward or forward.
Note
For BD discs with Java application, availabi lity of t he play resume func tion de pends on specifi c discs .
to slow
, and then press
/ to slow play
14
EN
Change video play
1
Play a title.
2 Use the remote control to change the play.
Button Action
AUDIO Directly select an audio language
SUBTITLE Directly select a subtitle language
OPTIONS
Note
Some operat ions may not work wi th some d iscs. S ee the infor mation accompanying the disc for details .
or channel on a disc.
on a disc. Access the above mentioned
actions or more options (e.g. repeat or shuffle play mode).
Display menu
BD-video disc
TOP MENU stop the video play and shows the disc menu. This feature is disc-dependent.
POP-UP MENU access to the BD-video disc menu without interrupting disc play.
DVD-video disc
TOP MENU display the root menu of a disc.
DISC MENU display disc information and guide you through the available functions in the disc.
VCD/SVCD/DivX disc:
DISC MENU display the content of the disc.
Tip
If the PBC setting is off, the VCD/SVCD skips the menu and starts play from t he firs t title. To display the menu before play, turn on the PBC setting (see “Adjust settings” > [Preference] > [VCD PBC]).
Display play information
1
During play, press OPTIONS.
The play options menu is displayed. »
2 Select [Info] in the menu, and press OK.
The current status of disc play is displayed. »
Select a title/chapter
1
During play, press OPTIONS.
The play options menu is displayed. »
2 Select [Titles] or [Chapters] in the menu, and
press OK.
3 Select the title or chapter number, and press
OK.
Skip play to a specific time
1
During play, press OPTIONS.
The play options menu is displayed. »
2 Select [Time Search] in the menu, and press
OK.
3 Press the Navigation buttons ( ) to change
the time to skip to, and press OK.
Zoom in/out
1
During play, press OPTIONS.
The play options menu is displayed. »
2 Select [Zoom] in the menu, and press OK. 3 Press the Navigation buttons ( )to select a
zoom factor, and press OK.
4 Press the Navigation buttons ( ) to
navigate in the zoomed picture.
To cancel zoom mode, press • display the zoom factor bar, and press the Navigation buttons ( factor [x1] is selected.
BACK to
) until the zoom
Repeat play for a specific section
1
During play, press OPTIONS .
The play options menu is displayed. »
2 Select [Repeat A-B] in the menu, and press OK
to set the starting point.
3 Forward the video play, and press OK to set the
ending point.
Repeat play starts. »
To cancel repeat play mode, press OPTIONS ,and select [Repeat A-B] and press OK.
Note
The marked section for repeat play is only possible within a track/title.
English
EN
15
View video play from different camera angles
1
During play, press OPTIONS.
The play options menu is displayed. »
2 Select [Angle List] in the menu, and press . 3 Select an angle option, and press OK.
Play changes to the selected angle. »
Note
Applicable o nly to dis cs that contain multi-angle scenes.
Manually shift subtitle display
You can manually adjust the subtitle position on the TV screen.
1 During play, press OPTIONS.
The play options menu is displayed. »
2 Select [Subtitle Shift] in the menu, and press
OK.
3 Press the Navigation buttons ( ) to shift the
subtitle, and press OK.
Tip
Subtitle shift is not suppor ted for DivX vid eo with external subtitles.
Play BD-video
Blu-ray video disc has a larger capacity and supports features such as high-definition videos, multi-channel surround sounds, interactive menus and so on.
1 Insert a BD-video disc. 2 Press , select [play Disc] and press OK. 3 Play automatically starts, or select a play option
in the menu and press OK.
During play, you can press TOP MENU to display additional information, features or content stored in the disc. During play, you can press POP-UP MENU to display the disc menu without interrupting disc play.
Enjoy Blu-ray 3D video
This player can play Blu-ray 3D videos.
1 Ensure that the TV is 3D and HDMI compliant,
and connect the TV to this player through an HDMI cable.
2 Turn on Blu-ray 3D output (see “Adjust
settings” > [Video] > [Blu-ray 3D video]).
3 Wear 3D glasses that are compatible with the
TV for viewing.
Enjoy BONUSVIEW
(Applicable only to a disc compatible with the BONUSVIEW or Picture-in-Picture feature) You can instantly view additional content (such as commentaries) in a small screen window.
1 Press OPTIONS .
The play options menu is displayed. »
2 Select [PIP Selection] in the menu, and then
select [PIP], and press OK.
The secondary video window is turned on. »
3 Select [2nd Audio Language] or [2nd Subtitle
Language] in the menu, and press
.
4 Select the language to play, and press OK.
Enjoy BD-Live
(Applicable only to a disc that enables BD-Live. Ensure that this player is connected to the Internet.) Additional contents (such as movie trailers, subtitles, etc.,) can be downloaded to a connected USB storage device. Special video data can be played while they are being downloaded. When the disc with BD-Live is played, the ID for this player or the disc can be sent to the content provider via the internet. Services for BD-Live vary from disc to disc.
Play DivX® video
DivX video is a digital media format that retains high quality despite a high rate of compression.
1 Insert a disc or USB device that contains the
DivX videos.
2 Press , select [play Disc] or [browse USB],
and press OK.
A contents menu is displayed. »
3 Select a video folder, and press OK. 4 Select a title to play, and press OK. 5 Use the remote control to control the play.
Button Action
AUDIO Select an audio language or
SUBTITLE Select a subtitle language.
channel.
Stop play.
EN
16
Loading...
+ 35 hidden pages