Philips BDP5012 User Manual

Troubleshooting

No reaction to the remote control.

Connect the product to the power outlet.

Point the remote control at the product.

Insert the batteries correctly.

Insert new batteries in the remote control.

Cannot play back a disc.

Make sure that the product supports the disc.

Make sure that the Blu-ray Disc player supports the region code of the DVD or BD. (BD: A: DVD: All or 1)

For DVD+RW/+R, make sure that the disc is finalized.

Clean the disc.

BLU-RAY DISC PLAYER BDP5012

Quick Start Guide

Connections

No video signal on the display device.

Turn on the TV.

Set the TV to the correct external input.

Select the correct video resolution using [HDMI].

Press and hold [B (PLAY)] on the front panel for 5 seconds to change the setting back to its default.

No 5.1-channel audio from the loudspeakers of the audio system.

Does the disc contain 5.1-channel audio? The 5.1-channel audio is not available when the disc does not contain it.

Does the audio system support 5.1-channel audio? The 5.1-channel audio is not available when the audio system does not contain it.

In the settings menu, set “HDMI Audio” to “Off”.

What’s in the box?

2 3

Basic Setup

Enjoy

User Manual

Need help?

User Manual

See the user manual that came with your Philips Blu-ray Disc Player.

Online

Go to www.philips.com/welcome.

Hotline

Call 1-866-309-0866 for our operators.

Be responsible Respect copyrights

Philips and Philips Shield are used under license of Koninklijke Philips Electronics NV.

Printed in China

JpnMF-0914/F7-3 E5K16UD_E5K17UD 1VMN27440A ★★

Blu-ray Disc Player

HDMI cable (High Speed HDMI Cable)

Remote Control with

Batteries (AAA x 2)

Quick Start Guide

User Manual

Registration CardRCA Audio / Video Cables

E T

Connections

Basic Setup

Enjoy

Connection To The TV

Using HDMI (best quality)

A Take the supplied HDMI cable. B

Plug one end of the HDMI cable into the HDMI OUT jack of this unit.

Plug the other end of the HDMI cable into the HDMI input jack of your TV.

VIDEO OUT

SL C

PB/C

PR/C

OPTICAL

COAXIAL

COMPONENT

DIGITAL OUT

5.1ch AUDIO OUT

AUDIO OUT

PCM/BITSTREAM

VIDEO OUT

ANALOG AUDIO CONNECTION

A Take the supplied RCA audio cable. B Plug the red and white RCA audio cable into

the AUDIO OUT (L/R) jacks of this unit.

C Plug the other ends of the RCA audio cable

into the audio input jacks of your TV.

AUDIO OUT

ANALOG VIDEO CONNECTION

Option 1 - Using Composite Video

(standard quality)

A Take the supplied RCA video cable. B Plug the yellow RCA video cable into the

VIDEO OUT jack of this unit.

C Plug the other end of the RCA video cable

into the video input jack of your TV.

OPTICAL

COAXIAL

HDMI OUTLAN

AUDIO I N

HDMI OUTLAN

Option 2 - Using Component Video

(better quality)

A Take a green, blue, and red component video

cable.

B Plug the component video cable into the

COMPONENT VIDEO OUT jacks of this unit.

C Plug the other ends of the component video cable

into the component video input jacks of your TV.

PB/C

PR/C

COMPONENT VIDEO OUT

(Green)

(Blue)

(Red)

COMPONENT

VIDEO IN

PB/C

PR/C

(Green)

(Blue)

(Red)

*1) This unit is compatible with the progressive scan

system. The feature provides you with the higher quality pictures than traditional output system does. To utilize this feature, a component or an HDMI connection is required. Refer to the “HDMI Video Resolution” or “Component Output” on page 32 in the user manual to set the resolution.

*2) HDMI connection requires no analog audio

connection.

CONNECTING THE AC CORD

After you made all necessary connections, connect the AC cord to the AC outlet.

Insert the plugs securely. Incomplete connections will result in the generation of noise.

VID OU

PB/C

PR/C

OPTICAL

COAXIAL

COMPONENT

DIGITAL OUT

AC outlet

AC 120V, 60 Hz

Supplied cables used in these connections are as follows:

RCA audio cable (L/R) x 1

RCA video cable x 1

HDMI cable (High Speed HDMI Cable) x 1

Please purchase the rest of the necessary cables at your local store.

PCM/BITSTREAM

AUDIO OUT

VIDEO OUT

Finding The Viewing Channel On Your TV

A After you have made all the necessary

connections, press [STANDBY-ON y] to turn on the unit.

B Turn on your TV. C Press the button on the TV’s remote control

that accesses the external input channel. It may be labeled “SOURCE”, “AV” or “SELECT” (refer to your TV’s user manual). Or press “2” on the TV’s remote control, then press channel down button repeatedly until

you see the PHILIPS splash screen.

This is the correct viewing channel (external input channel).

If a certain amount of time has passed since you turned on the unit, you may see the home menu instead of the PHILIPS splash screen.

Home menu:

Blu-ray Disc Player

The BDP5012 is now ready for use.

Disc Tray

SD Card Settings

Product Info

Start Disc Playback

Press [OPEN/CLOSE A] to open the disc tray.

Place the disc on the disc tray with its label side facing up.

Align the disc to the disc tray guide.

* Make sure the disc is compatible with this unit.

(Refer to page 18 in the user manual for the list of compatible discs.)

C Press [OPEN/CLOSE A] to close the disc tray.

It may take a while to load

the disc.

Playback may start automatically. If not, press [PLAY B].

To pause playback:

Press [PAUSE F].

To return to the normal playback:

Press [PLAY B].

To stop playback:

Press [STOP C].

To eject the disc:

Press [OPEN/CLOSE A] to open the disc tray. Remove the disc.

Press [OPEN/CLOSE A] to close the disc tray.

Pause

Play

VIDEO

Note: Refer to the user manual for other possible connections and important safety instructions.

Open/

Stop