Philips AZ9202/05, AZ9002/05, AZ9001/05 User Manual

Shockproof CD Player
AZ9001 AZ9002 AZ9003 AZ9011 AZ9201 AZ9202 AZ9203 AZ9211
México
Es necesario que lea cuidadosamente su instructivo de manejo.
PRECAUCIÓN - ADVERTENCIA
No abrir, riesgo de choque eléctrico
Verifique que el voltaje de alimentación
Para evitar el riesgo de choque eléctrico, no quite la tapa.
En caso de requerir servicio, dirijase al personal calificado.
ATENCIÓN
sea el requerido para su aparato
Descripción: Tocadiscos de CD portatil Modelo: AZ 9001/01, /11, /16, AZ 9002/01, /11, /16,
AZ 9003/01, /11, /16, AZ 9011/01, /11, /16, AZ 9201/01, /11, /16, AZ 9202/01, /11, /16, AZ 9203/01, /11, /16, AZ 9211/01, /11, /16
Nº de Serie: ______________________________
LEA CUIDADOSAMENTE ESTE INSTRUCTIVO
ANTES DE USAR SU APARATO.
45
6
7 8
9
0
!
@
#
3
BB
ITAL D
DIG
PROGRAM
O
F
F
• R
E
S
U
M
E
• H
O
L
D
L
I
N
E
O
U
T/
C
D
V
5
,
4
ESP
M
ODE
V
O
L
.
0
OPEN
2
1
%
$
3
4
English
Controls .................................................6
Quick start .............................................7
Power supply...................................8–10
Headphones.........................................10
General information ............................11
CD play..........................................12–13
Features.........................................14–18
In-car connection.................................19
Troubleshooting.............................20–21
English
Français
Commandes.........................................22
Mise en service rapide........................23
Alimentation électrique ................24–26
Ecouteurs.............................................26
Español
Controles .............................................38
Encendido rápido.................................39
Alimentación eléctrica..................40–42
Auriculares ..........................................42
Guarantees
Polizia de garantía
Mexico.........................................70–71
Informations générales .......................27
Lecture CD.....................................28–29
Caractéristiques ............................30–34
Raccordement en voiture ....................35
Pannes et remèdes .......................36–37
Información general ............................43
Reproducción de un CD.................44–45
Características ..............................46–50
Conexión al automóvil.........................51
Localización de averías.................52–53
Philips product warranty for
Australia......................................72–73
Guarantee and service for
New Zealand ....................................74
FrançaisEspañol
5
CONTROLS, refer to the illustration on page 3
1 9 .....................stops CD play, clears a program or switches the player off
English
2 DIGITAL DBB...DIGITAL DYNAMIC BASS BOOST switches the bass enhancement
3 §....................skips and searches CD tracks forwards
4 2;...................switches the player on, starts or pauses CD play
5 ........................display
6 ....................skips and searches CD tracks backwards
7 PROGRAM.......programs tracks and reviews the program
8 MODE..............selects the different playing possibilities:
9 RESUME..........stores the last position of a CD track played
HOLD..............locks all buttons
OFF ..................switches RESUME and HOLD off
0 LINE OUT/p ....3.5 mm headphone socket, socket to connect the player to another
! VOL E.........adjusts the volume
@ OPEN 2...........opens the CD lid
# 4.5V DC...........socket for external power supply
$ ........................typeplate
% ESP..................ELECTRONIC SKIP PROTECTION ensures continuous CD playback
on and off
SHUFFLE,
SHUFFLE REPEAT ALL, REPEAT, REPEAT ALL and SCAN
analogue audio input of an additional appliance, remote control socket (not on all versions)
regardless of vibrations and shocks
This set complies with the radio interference requirements of the
European Community.
6
QUICK START
1 OPEN 2
B B
D L A IT
IG D
ESP
PROG
RAM
MO
DE
O F
F
R E
S U
M E
H
O L
D
L
I N
E
O
U
T/
2.
OPEN
V
O
L .
0
1.
2.
1.
AA LR6 UM3
3 CD 4 5
L I
N
E
O
U
T/
V
O L
.
O F F
R
E S
U M
E
H
O L D
L I
N
E
O U
T/
N
E P O
V
O
L
.
0
N PE O
V
O L
.
0
0
6 PLAY 7 VOLUME
N
E
O
U
PROGRAM MODE
DIGITAL DBB
T/
ESP
V
O
L
.
0
!!!
O F F
R E S U M E
B B
D L A IT
IG D
P S E
PROGRAM MODE
O F F
R E
S U M
E
H
O L D
L
I N E
O
U
T/
N E P O
V O
L .
0
B B D L
A IT G I D
P S E
PROGRAM MODE
O F F
R E S U
M E
H O L D
L I N
E O
U T
N
/
E P O
V
O L
.
0
H O
HOLDOFF
O F
F
R
E
N
PE
O
PRO
GRAM
MODE
E S
P
L D
L I O
L I N
U
E
T/
O U T
V O
L .
0
English
P R
O
G
R A
M
M
O
D E
SU
M
E
H
O
L
D
L
I
N
E
O
U
T/
B B D L A T I G I D
O
P E N
7
POWER SUPPLY
Batteries (supplied or optionally available)
English
With this player you can use either:
• normal batteries type LR6, UM3 or AA (preferably Philips), or
• alkaline batteries type LR6, UM3 or AA (preferably Philips).
Notes: – Old and new or different types of batteries
should not be used in combination.
– Remove batteries if they are empty or if the
player is not going to be used for a long time.
Inserting batteries 1 Push OPEN 2 to open the CD lid.
2 Open the battery compartment and insert either
2 normal or alkaline batteries.
Battery indication
The battery symbol on the display is divided into 3 sections which indicate the approximate power capacity of the batteries.
• If A is flashing and bAtt is displayed, the batteries are empty.
Average playing time of batteries under normal conditions Battery type ESP on ESP off
Normal 7 hours 6 hours Alkaline 20 hours 18 hours ECO-PLUS NiMH batteries (not on all versions) 10 hours 9 hours
Batteries contain chemical substances, so they should be disposed of properly.
8
POWER SUPPLY
ECO-PLUS NiMH battery information
rechargeable ECO-PLUS NiMH batteries AY 3362 only)
Recharging works only on players with supplied rechargeable ECO-PLUS NiMH batteries AY 3362.
Recharging the ECO-PLUS NiMH batteries on board 1 Make sure you insert the rechargeable ECO-PLUS NiMH
batteries AY 3362.
2 Connect the mains adapter to the 4.5V DC socket of
the player and to the wall socket.
y A filled with 0–3 sections (depending on the
level of charge) is shown and ChArGE is displayed.
• Recharging stops when you start playback or when approximately 7 hours have passed by.
3 When the batteries are fully recharged, is
shown and FULL is displayed.
Notes: – It is normal for the batteries to become warm
during recharging.
– If the batteries become too warm, recharging will be interrupted for
approximately 30 minutes and Hot is displayed.
– To ensure proper recharging on board, take care that contacts are clean, and
you are using only the ECO-PLUS NiMH batteries AY 3362.
Rechargeable ECO-PLUS NiMH battery handling
• Recharging already charged or half-charged batteries will shorten their lifetime. Therefore, after using the rechargeable ECO-PLUS NiMH batteries a few times, discharge them completely before recharging.
• To avoid a short circuit, the batteries should not touch any metal objects.
• When the batteries quickly become empty after recharging, the contacts are dirty or the end of their lifetime has been reached.
(for versions supplied with
English
9
POWER SUPPLY/HEADPHONES
H
Mains adapter (supplied or optionally available)
English
Use only the AY 3170 adapter (4.5 V/300 mA direct current, positive pole to the centre pin). Any other product may damage the player.
1 Make sure that the local voltage corresponds to the
mains adapter´s voltage.
2 Connect the mains adapter to the 4.5V DC socket
of the player and to the wall socket.
Note: Always disconnect the adapter when you are not using it.
Headphones AY 3677
• Connect the supplied headphones to the LINE OUT/p socket.
Note: LINE OUT/p can also be used for connecting your
HiFi system (signal lead) or your car radio (cassette adapter or signal lead). In both cases, the volume of the player must be set to position 8.
C
D
V 5 ,
4
O
L
D
L
I
N
E
O
U
T/
V
O
L
.
0
Use your head when using headphones
Hearing safety: Do not play your headphones at a high volume. Hearing experts advise that continuous use at high volume can permanently damage your hearing.
Traffic safety: Do not use headphones while driving a vehicle. It may create a hazard and it is illegal in many countries. Even if your headphones are an open-air type designed to let you hear outside sounds, do not turn up the volume so high that you cannot hear what is going on around you.
10
GENERAL INFORMATION
CD player and CD handling
• Do not touch the lens A of the CD player.
• Do not expose the set, batteries or CDs to humidity, rain, sand or excessive heat (caused by heating equipment or direct sunlight).
• You can clean the CD player with a soft, slightly dampened, lint-free cloth. Do not use any cleaning agents as they may have a corrosive effect.
• To clean the CD, wipe it in a straight line from the centre towards the edge using a soft, lint-free cloth. A cleaning agent may damage the disc! Never write on a CD or attach a sticker to it.
• The lens may cloud over when the set is moved suddenly from cold to warm surroundings. Playing a CD is not possible then. Leave the CD player in a warm environment until the moisture has evaporated.
• Active mobile phones in the vicinity of the CD player may cause malfunctions.
• Avoid dropping the set as this may cause damage.
Environmental information
• All redundant packing material has been omitted. We have done our utmost to make the packaging easily separable into two mono materials: cardboard (box) and polyethylene (bags, protective foam sheet).
A
English
• Your set consists of materials which can be recycled if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packing materials, exhausted batteries and old equipment.
11
CD PLAY
D
Playing a CD
English
This CD player can play all kinds of Audio Discs such as CD-Recordables and CD-Rewritables. Do not try to play a CD-ROM, CDi, VCD, DVD or computer CD.
1 Push the OPEN 2 slider.
y The lid opens.
2 Insert an audio CD, printed side up, by pressing gently
on the CD centre so that it fits onto the hub. Close the lid by pressing it down.
3 Press 2; for approximately 1 second to switch the
player on and start CD playback.
y The current track number and the elapsed playing
time are displayed.
• You can pause playback by pressing 2;.
y The time where playback was paused is flashing.
• Continue playback by pressing 2; again.
4 Press 9 to stop playback.
y The total number of tracks and the total playing
time of the CD are displayed.
5 Press 9 again to switch the player off.
• To remove the CD, hold it by its edge and press the hub gently while lifting the CD.
Note: If there is no activity, the set will automatically
switch off after a while to save energy.
EN
P
V
O
L
.
0
M M
ODE
O
AL DBB
IGIT
ESP
0
12
CD PLAY
Playback information
If a recordable CD (CD-R) or a rewritable CD (CD-RW) is not recorded properly, nF dISC is displayed. In that case use FINALIZE on your CD recorder to complete the recording.
If you want to play a rewritable CD (CD-RW), it takes 3–15 seconds for sound reproduction to start once you have pressed 2;.
• Playback will stop if you open the CD lid.
• While the CD is read, 1 -:- is flashing.
Volume and bass
Volume adjustment
• Adjust the volume by using VOL E.
Bass adjustment
You can choose between the bass enhancement levels dbb1 and dbb2.
1 Press DIGITAL DBB as often as necessary to select
the desired bass intensity.
y dbb1 or dbb2 is displayed for 2 seconds and
is shown.
2 To switch dbb1 or dbb2 off, press DIGITAL DBB
repeatedly.
y goes off.
ESP
V
O
L
.
0
AL DBB
English
DIGIT
13
FEATURES
BB
Selecting a track and searching
English
Selecting a track during playback
• Briefly press ∞ or § once or several times to skip to the current, previous or next track.
y Playback continues with the selected track and
its number is displayed.
Selecting a track when playback is stopped 1 Briefly press or § once or several times.
y The selected track number is displayed.
2 Press 2; to start CD play.
y Playback starts with the selected track.
Searching for a passage during playback 1 Keep or § pressed to find a particular passage in
a backward or forward direction.
y Searching is started and playback continues at
low volume. After 2 seconds the search speeds up.
2 Release the button when you reach the desired passage.
y Normal playback continues from this very position.
Notes: – During SCAN searching is not possible.
– During SHUFFLE, SHUFFLE REPEAT ALL, REPEAT
or while playing a program, searching is only possible within the particular track.
PROGRAM MODE
ESP
14
Programming track numbers
You can select up to 99 tracks and store them in memory in a desired sequence. Any track can be stored more than once.
FEATURES
English
1 While playback is stopped, select a track with
or §.
PROGRAM
MODE
2 Press PROGRAM to store the track.
y PROGRAM lights up; the track number
programmed and P with the total number of stored tracks are displayed.
3 Select and store all desired tracks in this way.
4 Press 2; to start playback of your selected tracks.
y PROGRAM is shown and playback starts.
• You can review the program by pressing PROGRAM for more than 2 seconds.
y The display shows all stored tracks in sequence.
Notes: – If you press PROGRAM and there is no track selected,
SELECt is displayed.
– If you try to store more than 99 tracks, FULL is displayed.
Clearing the program 1 If necessary, press 9 to stop playback.
2 Press 9 to clear the program.
y CLEAr is displayed once, PROGRAM goes off
and the program is cleared.
Notes: The program will also be cleared if you
– interrupt the power supply or – open the CD lid, – or if the set switches off automatically.
15
FEATURES
Storing the last position played – RESUME
English
You can store the last position played. When restarting, playback continues from where you have stopped.
1 Switch the slider to RESUME during playback to
activate RESUME.
y RESUME is shown.
2 Press 9 whenever you want to stop playback.
3 Press 2; whenever you want to resume playback.
y RESUME is shown and playback continues from
where you have stopped.
• To deactivate RESUME, switch the slider to OFF.
y RESUME goes off.
Locking all buttons – HOLD
You can lock the buttons of the set. When a key is pressed, no action will be executed then.
1 Switch the slider to HOLD to activate HOLD.
y All buttons are locked. HoLd is displayed by
pressing any key. If the set is switched off, HoLd is displayed only by pressing 2;.
2 To deactivate HOLD, switch the slider to OFF.
O
F
F
R
E
S
U
M
E
H
O
L
D
L
I
N
E
O
U
T/
O
F F
R
E
SU
M
E
H
O
L
D
L
I
N
E
O
U
T
/
Note: When you deactivate HOLD by switching the
slider to RESUME and restart, playback continues from where you have stopped.
16
ESP
With a conventional portable CD player you might have experienced that the music stopped e.g. when you were jogging. The ELECTRONIC SKIP PROTECTION prevents loss of sound caused by light vibrations and shocks. Continuous playback is ensured. However, ESP does not prevent playback interruptions during serious running. It also does not protect the set against any damage caused by dropping!
• Press ESP during playback to activate the skip protection.
y is shown and the protection is activated.
• To deactivate the skip protection, press ESP again.
y goes off and the protection is deactivated.
FEATURES
AL DBB
ESP
English
DIGIT
17
FEATURES
Selecting different playing possibilities – MODE
English
It is possible to play tracks in random order, to repeat a track or the CD and to play the first few seconds of each track.
1 Press MODE during playback as often as necessary
until the display shows either:
y SHUFFLE: All tracks of the CD are played in
random order until all of them have been played once.
y SHUFFLE REPEAT ALL: All tracks of the CD are
played repeatedly in random order.
y REPEAT: The current track is played repeatedly. y REPEAT ALL: The entire CD is played repeatedly. y SCAN: The first 10 seconds of each of the
remaining tracks are played in sequence.
2 Playback starts in the chosen mode after 2 seconds.
• To return to normal playback, press MODE repeatedly until the display indicator goes off.
PROGRAM
MODE
18
IN-CAR CONNECTION
In-car use (connections supplied or optionally available)
Only use the AY 3545 car voltage converter (4.5 V, DC, positive pole to the centre pin) and the AY 3501 car cassette adapter. Any other product may damage the set.
1 Put the CD player on a
horizontal, vibration-free and
DIGIT DIGIT
AL AL
DIGIT
AL
stable surface. Make sure it is in a safe place, where the player is neither a danger nor obstacle to the driver and passengers.
2 Connect the DC plug of the voltage converter to the 4.5V DC socket of the
CD player (only for a 12 V car battery, negative grounding).
3 Insert the voltage converter into the cigarette lighter socket. If necessary, clean the
cigarette lighter socket to obtain a good electrical contact.
4 Turn down the volume and connect the cassette adapter plug to the LINE OUT/p
socket of the CD player.
5 Carefully insert the cassette adapter into the car radio’s cassette compartment. 6 Make sure the cord does not hinder your driving. 7 Start the CD player, set VOL E to position 8 and adjust the sound with the car
radio controls.
• Always remove the voltage converter from the cigarette lighter socket when the CD player is not in use.
4,5 V DC
B B D L
A T I G I D
ESP
PR
O G
R A
M M
O D E
O
F F
R E S U
M E
H
O L
D
L I N
E O U
T/
OPEN
V O
L
.
0
English
Notes: – Avoid excessive heat from the car heating or from direct sunlight (e.g. in a
parked car in the summer).
– If your car radio has a LINE IN socket, it is better to use it for the car radio
connection instead of the cassette adapter. Connect the signal lead to this LINE IN socket and to the LINE OUT/p socket of the CD player.
19
Loading...
+ 43 hidden pages