Philips AZ7902/00, AZ7901/00Z, AZ7901/00, AZ7900/00Z, AZ7900/00 User Manual [es]

Portable CD Player

AZ7900
AZ7901
AZ7902

México

Es necesario que lea cuidadosamente su instructivo de manejo.

PRECAUCIÓN - ADVERTENCIA

No abrir, riesgo de choque eléctrico

Verifique que el voltaje de alimentación

Para evitar el riesgo de choque eléctrico, no quite la tapa.

En caso de requerir servicio, dirijase al personal calificado.

ATENCIÓN

sea el requerido para su aparato

Descripción: Tocadiscos de CD portatil
Modelo: AZ 7900/01, /11, /16, AZ 7901/01, /11, /16,

AZ 7902/01, /11, /16

Alimentación: 110–127/220–240 V~ 50–60 Hz
Consumo: 4 W (AY 3170)
Importador: Philips Mexicana, S.A. de C.V.
Domicilio: Norte 45, # 669, Col. Industrial Vallejo
Localidad y Telefono: C.P. 02300 México D.F., Tel. [phone]
Exportador: Philips Hong Kong, Ltd.
País de Origen: China

Nº de Serie: ______________________________

LEA CUIDADOSAMENTE ESTE INSTRUCTIVO

ANTES DE USAR SU APARATO.

2

45

6

7
8

9

0

!

@

#

3

AL DBB

PROGRAM MODE

O

F
F

•
R
E

S

U

M

E

•
H

O

L

D

L

I

N

E

O

U

T/

C

D

V

5

,

4

DIGIT

V

O

L

.

0

OPEN

2

1

$

3

4

English

Controls .................................................6

Quick start .............................................7

Power supply...................................8–10

Headphones.........................................10

CD play..........................................11–12

Features.........................................13–16

In-car connection.................................17

Troubleshooting.............................18–19

General information ............................20

English

Français

Informations générales .......................21

Commandes.........................................22

Mise en service rapide........................23

Alimentation électrique ................24–26

Español

Controles .............................................36

Encendido rápido.................................37

Alimentación eléctrica..................38–40

Auriculares ..........................................40

Guarantees

Polizia de garantía

Mexico.........................................66–67

Ecouteurs.............................................26

Lecture CD.....................................27–28

Caractéristiques ............................29–32

Raccordement en voiture ....................33

Pannes et remèdes .......................34–35

Reproducción de un CD.................41–42

Características ..............................43–46

Conexión al automóvil.........................47

Localización de averías.................48–49

Información general ............................50

Philips product warranty for

Australia......................................68–69

Guarantee and service for

New Zealand ....................................70

FrançaisEspañol

∑

5

CONTROLS, refer to the illustration on page 3

1 9 .....................stops CD play, clears a program or switches the player off

English

2 DIGITAL DBB...DIGITAL DYNAMIC BASS BOOST switches the bass enhancement

3 §....................skips and searches CD tracks forwards

4 2;...................switches the player on, starts or pauses CD play

5 ........................display

6 ∞....................skips and searches CD tracks backwards

7 PROGRAM.......programs tracks and reviews the program

8 MODE..............selects the different playing possibilities:

9 RESUME..........stores the last position of a CD track played

HOLD..............locks all buttons

OFF ..................switches RESUME and HOLD off

0 LINE OUT/p ....3.5 mm headphone socket, socket to connect the player to another

! VOL E.........adjusts the volume

@ OPEN 2...........opens the CD lid

# 4.5V DC...........socket for external power supply

$ ........................typeplate

on and off

SHUFFLE,

SHUFFLE REPEAT ALL, REPEAT, REPEAT ALL and SCAN

analogue audio input of an additional appliance, remote control
socket (not on all versions)

This set complies with the radio interference requirements of the

European Community.

6

1 OPEN 2

B

B
D

L

A
IT
G
I
D

P
R

O
G

R
A
M

M

O
D

E

O
F

F

•

R
E

S
U

M
E

•

H

O
L

D

L

I

N

E

O
U

T/

2.

N

E
P
O

V

O

L

.

0

1.

QUICK START

AA
LR6

2.

1.

UM3

English

3 CD 4 5

L
I

N

E

O

U

T/

V

O
L

.

O
F
F

•

R

E
S

U
M

E

•

H

O
L
D

L

I
N

E

O

U

T/

OPEN

V
O

L

.

0

OPEN

V

O
L

.

0

0

6 PLAY 7 VOLUME

N

E

O

U

T/

V

O

L

.

0

PROGRAM MODE

AL DBB

DIGIT

!!!

O
F
F

•

R
E
S
U
M
E

•

B

DBB

DIGITAL

P
R
O

G
R
A

M
M

O
D
E

O
F
F

•

R
E

S
U
M

E

•

H

O
L
D

L
I
N

E

O
U

T

N

/

E
P
O

V

O
L

.

0

L DB

A
IT
IG
D

P
R
O
G

R
A
M

M
O

D
E

O
F
F

•

R
E
S
U

M
E

•

H
O

L
D

L
I
N

E
O

U
T

/

N
E
P
O

V
O
L

.

0

H
O

HOLD➟OFF

O
F

F

•

R

E

OPEN

P

R
O
G
R
A
M
M

O
D
E

L
D

L
I
N
E

O
U
T

V
O

L
.

0

P
RO

G

R
AM

M

O

D

E

S

U

M

E

•

H

O

L

D

L

I

N

E

O

U

T/

B
B
D
L
A
T
I
G
I
D

O

P
E
N

7

POWER SUPPLY

Batteries (supplied or optionally available)

English

With this player you can use either:

• normal batteries type LR6, UM3 or AA (preferably Philips), or

• alkaline batteries type LR6, UM3 or AA (preferably Philips).

Notes: – Old and new or different types of batteries

should not be used in combination.

– Remove batteries if they are empty or if the

player is not going to be used for a long time.

Inserting batteries
1 Push OPEN 2 to open the CD lid.

2 Open the battery compartment and insert either

2 normal or alkaline batteries.

Battery indication

The battery symbol on the display is divided into
3 sections which indicate the approximate power
capacity of the batteries.

• If A is shown or flashing (depending on the
version) and bAtt is displayed, the batteries are
empty.

Average playing time of batteries under normal conditions
Battery type Playing time

Normal 6 hours
Alkaline 18 hours
ECO-PLUS NiMH batteries (not on all versions) 9 hours

Batteries contain chemical substances, so they should be disposed of
properly.

8

POWER SUPPLY

ECO-PLUS NiMH battery information

rechargeable ECO-PLUS NiMH batteries AY 3362 only)

Recharging works only on players with supplied rechargeable
ECO-PLUS NiMH batteries AY 3362.

Recharging the ECO-PLUS NiMH batteries on board
1 Make sure you insert the rechargeable ECO-PLUS NiMH

batteries AY 3362.

2 Connect the mains adapter to the 4.5V DC socket of

the player and to the wall socket.

y A filled with 0–3 sections (depending on the

level of charge) is shown and ChArGE is
displayed.

• Recharging stops when you start playback or when
approximately 7 hours have passed by.

3 When the batteries are fully recharged, is

shown and FULL is displayed.

Notes: – It is normal for the batteries to become warm

during recharging.

– If the batteries become too warm, recharging will be interrupted for

approximately 30 minutes and Hot is displayed.

– To ensure proper recharging on board, take care that contacts are clean, and

you are using only the ECO-PLUS NiMH batteries AY 3362.

Rechargeable ECO-PLUS NiMH battery handling

• Recharging already charged or half-charged batteries will shorten their lifetime.
Therefore, after using the rechargeable ECO-PLUS NiMH batteries a few times,
discharge them completely before recharging.

(for versions supplied with

English

• To avoid a short circuit, the batteries should not touch any metal objects.

• When the batteries quickly become empty after recharging, the contacts are dirty
or the end of their lifetime has been reached.

9

POWER SUPPLY/HEADPHONES

H

Mains adapter (supplied or optionally available)

English

Use only the AY 3170 adapter (4.5 V/300 mA direct
current, positive pole to the centre pin). Any other
product may damage the player.

1 Make sure that the local voltage corresponds to the

mains adapter´s voltage.

2 Connect the mains adapter to the 4.5V DC socket

of the player and to the wall socket.

Note: Always disconnect the adapter when you are not using it.

Headphones AY 3677

• Connect the supplied headphones to the LINE OUT/p
socket.

Note: LINE OUT/p can also be used for connecting your

HiFi system (signal lead) or your car radio
(cassette adapter or signal lead). In both cases,
the volume of the player must be set to position 8.

C

D

V
5
,

4

O

L

D

L

I

N

E

O

U

T/

V

O

L

.

0

Use your head when using headphones

Hearing safety: Do not play your headphones at a high volume. Hearing experts
advise that continuous use at high volume can permanently damage your hearing.

Traffic safety: Do not use headphones while driving a vehicle. It may create a hazard
and it is illegal in many countries. Even if your headphones are an open-air type
designed to let you hear outside sounds, do not turn up the volume so high that you
cannot hear what is going on around you.

10

D

Playing a CD

This CD player can play all kinds of Audio Discs such
as CD-Recordables and CD-Rewritables. Do not try to
play a CD-ROM, CDi, VCD, DVD or computer CD.

CD PLAY

English

1 Push the OPEN 2 slider.

y The lid opens.

2 Insert an audio CD, printed side up, by pressing

gently on the CD centre so that it fits onto the hub.
Close the lid by pressing it down.

3 Press 2; for approximately 1 second to switch the

player on and start CD playback.

y The current track number and the elapsed

playing time are displayed.

• You can pause playback by pressing 2;.

y The time where playback was paused is flashing.

• Continue playback by pressing 2; again.

4 Press 9 to stop playback.

y The total number of tracks and the total playing

time of the CD are displayed.

5 Press 9 again to switch the player off.

• To remove the CD, hold it by its edge and press the
hub gently while lifting the CD.

Note: If there is no activity, the set will automatically

switch off after a while to save energy.

V

M MODE

EN

P

O

L

.

0

O

AL DBB

IGIT

0

11

CD PLAY

Playback information

English

• If a recordable CD (CD-R) or a rewritable CD (CD-RW) is not recorded
properly, nF dISC is displayed. In that case use FINALIZE on your
CD recorder to complete the recording.

• If you want to play a rewritable CD (CD-RW), it takes 3–15 seconds for
sound reproduction to start once you have pressed 2;.

• Playback will stop if you open the CD lid.

• While the CD is read, 1 -:- is flashing.

Volume and bass

Volume adjustment

• Adjust the volume by using VOL E.

Bass adjustment

• Press DBB to switch the bass enhancement on or off.

y is shown if the bass enhancement is

activated.

V

O

L

.

0

AL DBB

DIGIT

12

Selecting a track and searching

Selecting a track during playback

• Briefly press ∞ or § once or several times to skip
to the current, previous or next track.

y Playback continues with the selected track and

its number is displayed.

Selecting a track when playback is stopped
1 Briefly press ∞ or § once or several times.

y The selected track number is displayed.

2 Press 2; to start CD play.

y Playback starts with the selected track.

Searching for a passage during playback
1 Keep ∞ or § pressed to find a particular passage in

a backward or forward direction.

y Searching is started and playback continues at

low volume. After 2 seconds the search speeds up.

2 Release the button when you reach the desired passage.

y Normal playback continues from this very position.

Notes: – During SCAN searching is not possible.

– During SHUFFLE, SHUFFLE REPEAT ALL, REPEAT

or while playing a program, searching is only
possible within the particular track.

FEATURES

English

PROGRAM MODE

13

FEATURES

Programming track numbers

English

You can select up to 15 tracks and store them in
memory in a desired sequence. Any track can be stored
more than once.

1 While playback is stopped, select a track with

∞ or §.

2 Press PROGRAM to store the track.

y PROGRAM lights up; the track number

programmed and P with the total number of
stored tracks are displayed.

3 Select and store all desired tracks in this way.

4 Press 2; to start playback of your selected tracks.

y PROGRAM is shown and playback starts.

• You can review the program by pressing PROGRAM for more than 2 seconds.

y The display shows all stored tracks in sequence.

Notes: – If you press PROGRAM and there is no track selected,

SELECt is displayed.

– If you try to store more than 15 tracks, FULL is displayed.

Clearing the program
1 If necessary, press 9 to stop playback.

PROGRAM

MODE

2 Press 9 to clear the program.

y CLEAr is displayed once, PROGRAM goes off

and the program is cleared.

Notes: The program will also be cleared if you

– interrupt the power supply or
– open the CD lid,
– or if the set switches off automatically.

14

Storing the last position played – RESUME

You can store the last position played. When restarting,
playback continues from where you have stopped.

1 Switch the slider to RESUME during playback to

activate RESUME.

y RESUME is shown.

2 Press 9 whenever you want to stop playback.

3 Press 2; whenever you want to resume playback.

y RESUME is shown and playback continues from

where you have stopped.

• To deactivate RESUME, switch the slider to OFF.

y RESUME goes off.

Locking all buttons – HOLD

You can lock the buttons of the set. When a key is
pressed, no action will be executed then.

1 Switch the slider to HOLD to activate HOLD.

y All buttons are locked. HoLd is displayed by

pressing any key. If the set is switched off,
HoLd is displayed only by pressing 2;.

2 To deactivate HOLD, switch the slider to OFF.

FEATURES

O

F

F

•

R

E

S

U

M

E

•

H

O

L

D

O

F

F

•

R

E

SU

M

E

•

H

O

L

D

English

L

I

N

E

O

U

T/

L

I

N

E

O

U

T

/

Note: When you deactivate HOLD by switching the

slider to RESUME and restart, playback continues
from where you have stopped.

15

FEATURES

Selecting different playing possibilities – MODE

English

It is possible to play tracks in random order, to repeat a track
or the CD and to play the first few seconds of each track.

1 Press MODE during playback as often as necessary

until the display shows either:

y SHUFFLE: All tracks of the CD are played in

random order until all of them have been played
once.

y SHUFFLE REPEAT ALL: All tracks of the CD are

played repeatedly in random order.

y REPEAT: The current track is played repeatedly.
y REPEAT ALL: The entire CD is played repeatedly.
y SCAN: The first 10 seconds of each of the

remaining tracks are played in sequence.

2 Playback starts in the chosen mode after 2 seconds.

• To return to normal playback, press MODE repeatedly
until the display indicator goes off.

PROGRAM

MODE

16

IN-CAR CONNECTION

In-car use (connections supplied or optionally available)

Only use the AY 3545 car
voltage converter (4.5 V, DC,
positive pole to the centre pin)
and the AY 3501 car cassette
adapter. Any other product may
damage the set.

1 Put the CD player on a

horizontal, vibration-free and

DIGIT

DIGIT

AL
AL

DIGIT

AL

stable surface. Make sure it
is in a safe place, where the
player is neither a danger
nor obstacle to the driver and passengers.

2 Connect the DC plug of the voltage converter to the 4.5V DC socket of the

CD player (only for a 12 V car battery, negative grounding).

3 Insert the voltage converter into the cigarette lighter socket. If necessary, clean the

cigarette lighter socket to obtain a good electrical contact.

4 Turn down the volume and connect the cassette adapter plug to the LINE OUT/p

socket of the CD player.

5 Carefully insert the cassette adapter into the car radio’s cassette compartment.
6 Make sure the cord does not hinder your driving.
7 Start the CD player, set VOL E to position 8 and adjust the sound with the car

radio controls.

• Always remove the voltage converter from the cigarette lighter socket when the
CD player is not in use.

4,5 V DC

B

B
D
L
A
T
I

G
I
D

PR
O
G

R
A
M

M
O

D
E

O
F

F

•

R
E
S

U
M

E

•

H
O

L
D

L
I

N
E

O

U
T/

EN
OP

V

O

L
.

0

English

Notes: – Avoid excessive heat from the car heating or from direct sunlight (e.g. in a

parked car in the summer).

– If your car radio has a LINE IN socket, it is better to use it for the car radio

connection instead of the cassette adapter. Connect the signal lead to this
LINE IN socket and the LINE OUT/p socket of the CD player.

17

TROUBLESHOOTING

English

WARNING

Under no circumstances should you try to repair the set yourself as this
will invalidate the guarantee.

Problem Possible cause Solution

No power, Batteries
playback does Batteries inserted incorrectly Insert the batteries
not start correctly.

Batteries are empty. Change the batteries.
Contact pins are dirty. Clean them with a cloth.

Mains adapter

Loose connection Connect the adapter

In-car use

Cigarette lighter is not powered Switch on ignition or insert
when ignition is off. batteries.

nF dISC CD-RW (CD-R) is not recorded Use FINALIZE on the
indication properly. CD recorder to complete

no dISC The CD is badly Replace or clean the CD.
indication scratched or dirty.

CD is not or incorrectly inserted. Insert a CD, label upwards.
The laser lens is steamed up. Wait until the lens has

HoLd indication HOLD is activated. Deactivate HOLD.
and/or no reaction
to controls

Electrostatic discharge Disconnect the set from

securely.

the recording.

cleared.

power supply or take out
the batteries for
a few seconds.

18