Philips AZ-3068 Owners Manual
AZ3068MP3-CD Soundmachine
User Manual
W
CLASS 1
LASER PRODUCT
AZ 3068
Meet Philips at the Internet
http://www.philips.com
Printed in China ZYL-0810
123 5 6 7
8
4
90!@#
$
%
^
9
4
0
$
%
#
@
!
7
8
2
4
5
6
3
3
CD TUNER
REPEAT
BAND
SHUFFLE
SEARCHDISPLAY
PROG
DBB MUTE
TUNING +
TUNING –
1
1
2
3
4
5
6
8
7
9
A
0
6 x D-cells - R20 - UM1
X
A AB
C
Remove the insulation plastic tab.
Retirez la feuille de protection en
plastique.
Mains plug
This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this
type of plug proceed as follows:
1.Remove fuse cover and fuse.
2.Fix new fuse which should be a BS1362 5 Amp, A.S.T.A. or BSI approved type.
3.Refit the fuse cover.
If the fitted plug is not suitable for your socket outlets, it should be cut off and
an appropriate plug fitted in its place. If the mains plug contains a fuse, this
should have a value of 5 Amp. If a plug without a fuse is used, the fuse at the
distribution board should not be greater than 5 Amp.
Note: The severed plug must be disposed of to avoid a possible shock hazard
should it be inserted into a 13 Amp socket elsewhere.
How to connect a plug
The wires in the mains lead are coloured with the following code: blue = neutral
(N), brown = live (L). As these colours may not correspond with the colour markings identifying the terminals in your plug, proceed as follows:
• Connect the blue wire to the terminal marked N or coloured black.
• Connect the brown wire to the terminal marked L or coloured red.
• Do not connect either wire to the earth terminal in the plug, marked E (or e) or
coloured green (or green and yellow).
Before replacing the plug cover, make certain that the cord grip is clamped over
the sheath of the lead - not simply over the two wires.
Copyright in the U.K.
Recording and playback of material may require consent. See Copyright Act 1956
and The Performer’s Protection Acts 1958 to 1972.
Important notes for users in the U.K.
Loading...