Quick Use
Guide AZ3067
1 Choosing mains Supply
aConnect the AC mains lead to the AC MAINS inlet and the wall socket..
-OR-
bOpen the battery door and insert 6 x D batteries.
2 Listening to the Radio
aPress STANDBY ON y to on, then press Source selector to select TUNER (or press TUNER on the remote control).
bPress and hold PROGRAM until AUTOSTORE appears.
•Available stations are programmed.
cPress ALBUM/ PRESET -, + until the desired preset station is displayed
3 Playing a CD/MP3
This player plays Audio Discs
including CD-Rs/CD-RWs, and
MP3 CDs.
aPress y once or more to on, then select CD source (or press CD on the remote control)
bPress OPEN•CLOSE to open the CD door.
cInsert a CD/MP3 with the printed side facing up and close the door.
dPress 38 to start playback. e To stop CD playback, press 9.
1a
1b
R-20, UM-1 or D-cells
(not included)
2a1 |
4b |
4d |
3a1 |
|
4e |
4a1 |
|
|
|
2c |
|
|
|
|
|
|
3d |
|
2a2 |
3e |
|
3a2 |
|
|
|
|
|
4a2 |
|
4 Playing a tape
aPress y once or more to on, then select TAPE source
bPress 9/ to open the cassette holder.
cInsert a cassette and close the door.
dPress 1 to start playback.
e To stop the tape, press 9/.
STANDBY ON y power on/ off switch.
AUX
3.5 mm jack for external audio appliance
p
3.5 mm stereo headphone socket
Telescopic antenna
Improves FM reception.
ALBUM/ PRESET -, +
Press to select an album. (MP3 only);
Press to select a preset radio station
MODE
Press to select different play modes: e.g. REPEAT or SHUFFLE(random order)
Source selector
Press to select CD(MP3-
CD)/ TUNER/ AUX/
TAPE function
PROGRAM
Use to program CD tracks or preset radio stations.
CASSETTE
RECORDER keys
Press to operate a tape.
OPEN•CLOSE
Press to open/close the
CD door.
VOLUME
Turn to adjust volume level.
DBB
Press to turn the bass enhancement on(DBB1 or DBB2) /off.
9
Press to stop CD playback or erase a CD program.
FM•MW
Selects wavebands; During playback, press to display MP3-CD information (MP3 only)
SEARCH ∞ §
Skips & searches CD tracks backwards/ forwards;
Tunes to radio stations (down/up).
REMOTE CONTROL
Insert 2 batteries, type AAA, R03 or UM4 (not included)