Philips AZ1826 User Manual
AZ1826MP3-CD Soundmachine
User Manual
9
5
8
1
3
4
0
!
@
2
7
6
A
C
M
A
I
N
S
~
CD
SHUFFLE
REPEAT
DBB MUTE
TUNING
PRESET SEARCH
ALBUM+
ALBUM-
VOL
USB
31
0
@
4
8
2
5
6
7
9
!
2
3
1
1
PRESET
MHz
FM
TUNER
2
CD
TRK ALB
MP3
3
CD
REP
PROG
ALL
TRK
MP3
CD
SHUF
TRK
CD
PROG
TRK ALB
MP3
6
CD
PROG
TRK ALB
MP3
7
9
X
4
5
USB
TRK ALB
MP3
WMA
8
English CONTROLS/POWER SUPPLY
SUPPLIED ACCESSORIES
– AC mains lead
– remote control
TOP AND FRONT PANELS (See 1)
1 PUSH TO OPEN - press to open/close CD door
2 PROG
CD/MP3/WMA/USB:
programs tracks
MW/FM:
programs preset radio stations
3 MODE - selects different play modes: e.g. REP or
SHUF (random order)
4 VOL 3 , 4 - adjusts volume level
ALBUM/PRESET + ,-(up, down) -
MP3/WMA/USB
only: selects albums
MW/FM: selects a preset radio station
5 Display - shows the status of the set
6 2; - starts or pauses CD/USB playback.
9 - stops CD/USB playback;
- erases a CD/USB program
∞ , § TUNING DOWN, TUNING UP -
CD/MP3/WMA/USB:
- searches backward and forward within a track;
- skips to the beginning of a current track/
previous/ later track
MW/FM: -
tunes to radio stations
7 CD/USB -selects disc or USB mode
8 USB port -
connects an external USB mass
storage device
9
Source selector:
CD/USB,
MW, FM
, OFF
–
selects CD/USB or radio source of sound;
–
switches off the set
BACK PANEL
0 Telescopic aerial - improves FM reception
! Battery compartment - for 6 batteries, type
R-14, UM2 or C-cells
@ AC MAINS - inlet for mains lead.
REMOTE CONTROL
1 CD – selects CD mode
2 USB – selects USB mode
3 9 – stops CD/USB playback;
– erases a CD/USB programme
4 2; – starts/ pauses CD/USB playback
ALBUM + -
MP3
/WMA/USB
only: selects albums
∞ , §
– skips to the beginning of a current track
previous/ subsequent track
5 PRESET
+, –
MW/FM:
selects a preset radio station (up, down)
6 REPEAT –selects repeat modes
7 SHUFFLE – plays all CD tracks in random order
8 SEARCH 3,4 – searches backwards/ forwards
within a track
9 TUNING 3,4 – tunes to tuner stations
0 VOL 3,4 – adjusts volume level (up, down)
! DBB – turns on/off bass enchancement
@ MUTE – mutes or restores the volume
CAUTION
Use of controls or adjustments or performance
of procedures other than herein may result in
hazardous radiation exposure or other unsafe
operation.
MAINS SUPPLY
Whenever convenient, use the mains supply to
conserve battery life. Make sure you remove the
power plug from the set and wall socket before
inserting batteries.
Batteries
Main set (See 1)
1 Insert 6 batteries, type R-14, UM2 or C-cells, (not
included, preferably alkaline) with the correct
polarity.
Remote control (See 1)
Important!
• Before using the remote control, remove the
insulation plastic tab as shown in figure 1.
• If the remote control does not function
correctly or the operating range is reduced,
replace the battery with a new (CR2025) type
battery.
1 Pull the battery tray out as shown in figure 1.
2 Replace a new battery according to polarity
indication, and fully insert the battery tray back to
the original position.
• Incorrect use of batteries can cause electrolyte
leakage and will corrode the compartment or
cause the batteries to burst.
• Do not mix battery types: e.g. alkaline with carbon
zinc. Only use batteries of the same type for the
set.
• When inserting new batteries, do not try to mix
old batteries with the new ones.
• Remove the batteries if the set is not to be used
for a long time.
Loading...