Philips AZ-1123-W Owners Manual
AZ1123WCD Soundmachine
User Manual
1
6
7
8
!
@
1
2
9
0
4
3
5
AC MAINS~
PHONES
6 x R14 • UM-2 • C-CELLS
2
3
4
5
6
7
X
PRO
REP ALL
SHUF
English Controls/Power Supply
Supplied Accessories
– AC power cord
Top/front panels (See 1)
1
Source selector: CD,FM,MW or OFF
–
selects CD or radio (FM/MW) source of
sound
–
power off switch
2
2; –starts or pauses CD playback
§ ∞
–
selects the next/previous track
– fast searches forwards/backwards
(press and hold the button)
PROG – programs tracks and reviews the
program
9–stops CD playback;
–
erases a CD program
3
Display–shows the CD functions
4
REPEAT–repeats a track/
CD program/entire CD.
5
SHUFFLE – plays all tracks in random order
6 OPEN•CLOSE – opens/ closes the CD
door
7 TUNING
– tunes to radio stations
8
VOLUME–adjusts volume level
Back/bottom panels (See 1)
9 Telescopic antenna – improves FM
reception
0 Battery door – open to insert 6 x 1.5V
R-14/ UM-2/ C-cells
! p – 3.5 mm stereo headphone socket
Helpful hints: The speakers will be muted
when headphones are connected to the set.
@ AC MAINS~ – inlet for power cord
CAUTION
- Visible and invisible laser radiation.
If the cover is open, do not look at
the beam.
- High voltage! Do not open.You run
the risk of getting an electric shock.
The machine does not contain any
user-serviceable parts.
- Modification of the product could
result in hazardous radiation of EMC
or other unsafe operation.
This set complies with the radio
interference requirements of the
European Community.
Power Supply
Whenever convenient, use the power supply
cord if you want to conserve battery life.
Make sure you remove the plug from the set
and wall outlet before inserting batteries.
Batteries (not included)
1 Open the battery door and inser t 6 batteries,
type R-14, UM-2 or C-cells, (preferably alkaline) with the correct polarity as indicated by
the "+" and "–" symbols inside the compartment (See 1).
2 Replace the battery door, making sure the bat-
teries are firmly and correctly in place. The set is
now ready to operate.
• Incorrect use of batteries can cause
electrolyte leakage and will corrode the
compartment or cause the batteries to burst:
• Do not mix battery types: e.g. alkaline with carbon zinc. Only use batteries of the same type for
the set.
• When inserting new batteries, do not try to mix
old batteries with the new ones.
• Remove the batteries if the set is not to be used
for a long time.
Batteries contain chemical substances, so
they should be disposed of properly.
Loading...