Philips AX2003/18A, AX2002/05, AX2002/00, AX2001/00, AX2000/00Z User Manual [es]
...
Portable CD player
PROGRAM
MODE
DIGITAL DYNAMIC BASS BOOST
CD REWRITABLE COMPATIBLE
PROGRAM
RESUME
ESP
DBB
PROGRAM
RESUME
ESP
DBB
45 SECOND ELECTR
ONIC SKIP PROTECTION
DIGITAL AUDIO
COMPACT
AX2000 AX2011
AX2001 AX5000
AX2002 AX5001
AX2003 AX5011
AX5013
No abrir, riesgo de choque eléctrico
Verifique que el voltaje de alimentación
sea el requerido para su aparato
ATENCIÓN
Para evitar el riesgo de choque eléctrico, no quite la tapa.
En caso de requerir servicio, dirijase al personal calificado.
PRECAUCIÓN - ADVERTENCIA
México
Es necesario que lea cuidadosamente su instructivo de manejo.
Descripción: Tocadiscos de CD portatil
Modelo: AX 2000/01, /11, /16, AX 2001/01, /11, /16,
AX 2002/01, /11, /16, AX 2003/01, /11, /16,
AX 2011/01, /11, /16, AX 5000/01, /11, /16
AX 5001/01, /11, /16, AX 5011/01, /11, /16
AX 5013/01, /11, /16
Alimentación: 110–127/220–240 V~ 50–60 Hz
Consumo: 4 W (AY 3170)
Importador: Philips Mexicana, S.A. de C.V.
Domicilio: Norte 45, # 669, Col. Industrial Vallejo
Localidad y Telefono: C.P. 02300 México D.F., Tel. 5728 42 00
Exportador: Philips Electronics Hong Kong, Ltd.
País de Origen: China
Nº de Serie: ______________________________
LEA CUIDADOSAMENTE ESTE INSTRUCTIVO
ANTES DE USAR SU APARATO.
English
3
4
5
6
7
8
9
0
!
@
$
%
#
1
2
^
3
4
English
Controls .................................................6
Quick start .............................................7
Power supply...................................8–10
General information......................10–11
CD play..........................................12–13
Features.........................................14–18
In-car connection.................................19
Troubleshooting.............................20–21
English
Français
Commandes.........................................22
Mise en service rapide........................23
Alimentation électrique ................24–26
Informations générales.................26–27
Español
Controles .............................................38
Encendido rápido.................................39
Alimentación eléctrica..................40–42
Información general......................42–43
∑
Controls ...............................................54
Quick start ...........................................55
Power supply.................................56–58
General information......................58–59
Guarantees
Polizia de garantía
Mexico.........................................70–71
Lecture CD.....................................28–29
Caractéristiques ............................30–34
Raccordement en voiture ....................35
Pannes et remèdes .......................36–37
Reproducción de un CD.................44–45
Características ..............................46–50
Conexión al automóvil.........................51
Localización de averías.................52–53
CD play..........................................60–61
Features.........................................62–66
In-car connection.................................67
Troubleshooting.............................68–69
Philips product warranty for
Australia......................................72–73
Guarantee and service for
New Zealand ....................................74
Français
Español
∑
5
CONTROLS, refer to the illustration on page 3
1 OPEN 2...........opens the CD lid
English
2 2;...................switches the player on, starts or pauses CD play
3 9 .....................stops CD play, clears a program or switches the player off
4 §....................skips and searches CD tracks forwards
5 ESP..................ELECTRONIC SKIP PROTECTION ensures continuous CD playback
6 MODE..............selects the different playing possibilities:
7 ........................display
8 PROGRAM.......programs tracks and reviews the program
9 BASS...............switches the bass enhancement on and off. This button also
0 ∞....................skips and searches CD tracks backwards
! RESUME..........stores the last position of a CD track played
HOLD...............locks all buttons
OFF ..................switches RESUME and HOLD off
@ LINE OUT/p ....3.5 mm headphone socket, socket to connect the player to another
# VOL E.........adjusts the volume
$ 4.5V DC...........socket for external power supply
% ........................typeplate
^ ........................belt clip holder
regardless of vibrations and shocks
SHUFFLE,
SHUFFLE REPEAT ALL, REPEAT, REPEAT ALL and SCAN
switches acoustic feedback (the beep) on/off when it is pressed for
more than 2 seconds
audio input of an additional appliance, remote control socket (not
on all versions)
This set complies with the radio interference requirements of the
European Community.
6
1 OPEN 2
3 CD 4 5
HOLD➟OFF
6 PLAY 7 VOLUME
!!!
AA
LR6
UM3
1.
2.
2.
1.
SS
QUICK START
English
7
POWER SUPPLY
Batteries (supplied or optionally available)
English
You can use the following batteries with this CD-player:
• normal batteries type LR6, UM3 or AA (preferably Philips), or
• alkaline batteries type LR6, UM3 or AA (preferably Philips).
Note: – Old and new or different types of batteries should not be used in
combination. Remove batteries if they are empty or if the player is
not going to be used for a long time.
Inserting batteries
1 Push OPEN 2 to open the CD lid.
2 Open the battery compartment and insert either
2 normal or alkaline batteries, or the rechargeable
NiMH battery AY 3362 (if supplied).
Battery indication
The approximate power level of your batteries is shown in the display.
Battery full
Battery two-thirds full
Battery one-third full
Battery dead or empty. When the batteries are
dead or empty, the symbol A flashes, bAtt is
displayed, and the beep tone sounds repeatedly.
Average playing time of batteries under normal conditions
Battery type ESP on ESP off
Normal 7 hours 6 hours
Alkaline 22 hours 19 hours
Rechargeable ECO-PLUS NiMH battery 10 hours 9 hours
Batteries contain chemical substances, so they should be disposed
of properly.
8
POWER SUPPLY
ECO-PLUS NiMH battery information (for versions supplied with
the rechargeable ECO-PLUS NiMH battery AY 3362)
Recharging works only on players supplied with the rechargeable ECO-PLUS NiMH
battery AY 3362.
Recharging the ECO-PLUS NiMH battery on board
1 Insert the rechargeable ECO-PLUS NiMH battery AY 3362.
2 Connect the mains adapter to the 4.5V DC socket of
the player and then to the wall socket.
y A is shown and ChArGE is displayed for 5
seconds.
• Recharging stops after a maximum of 7 hours, or when you start playback.
3 When the battery is fully recharged, and
FULL appear briefly in the display, before the
display switches off.
Notes: – It is normal for the batteries to become warm during recharging.
– If the batteries become too warm, recharging will be interrupted for
approximately 30 minutes and
– To ensure proper recharging on board, take care that contacts are clean.
– Use only the ECO-PLUS NiMH battery AY 3362.
Handling instructions
• Recharging already charged or half-charged batteries will shorten their lifetime.
We therefore recommend that you let the rechargeable ECO-PLUS NiMH battery
run till it is completely empty before you recharge it.
• To avoid a short circuit, do not let the battery touch any metal object.
• If the battery becomes empty soon after recharging, then either its contacts are
dirty or it has reached the end of its lifetime.
Hot
is displayed.
English
9
POWER SUPPLY / GENERAL INFORMATION
LIFT
LOCK
RELEASE
Mains adapter (supplied or optionally available)
English
Use only the AY 3170 adapter (4.5 V/300 mA direct
current, positive pole to the centre pin). Any other
product may damage the player.
1 Make sure that the adapter’s voltage corresponds to
the local voltage.
2 Connect the adapter to the 4.5V DC socket of the
player and to the wall socket.
Note: Always disconnect the adapter when you are not using it.
Belt Clip (not on all versions)
1 To attach the belt clip to the CD-player, position the
shaped grip (found on the back of the belt clip) so that
it fits into the belt clip hole of the CD-player.
2 Turn the clip to LOCK as indicated on the set.
3 To detach, gently lift the belt clip and turn
to RELEASE as indicated on the set.
Environmental information
• All redundant packing material has been omitted. We have done our utmost to
make the packaging easily separable into two mono materials: cardboard (box) and
polyethylene (bags, protective foam sheet).
• Your set consists of materials which can be recycled if disassembled by a
specialized company. Please observe the local regulations regarding the disposal of
packing materials, exhausted batteries and old equipment.
BELT CLIP
4.5
V
D
C
10
GENERAL INFORMATION
CD-player and CD handling
• Do not touch the lens A of the CD-player.
• Do not expose the set, batteries or CDs to humidity,
rain, sand or excessive heat (caused by heating
equipment or direct sunlight).
• You can clean the CD-player with a soft, slightly
dampened, lint-free cloth. Do not use any cleaning
agents as they may have a corrosive effect.
• To clean the CD, wipe it in a straight line from the centre towards the edge using a
soft, lint-free cloth. A cleaning agent may damage the disc! Never write on a CD or
attach a sticker to it.
• The lens may cloud over when the set is moved suddenly from cold to warm
surroundings. Playing a CD is not possible then. Leave the CD-player in a warm
environment until the moisture has evaporated.
• Active mobile phones in the vicinity of the CD-player may cause malfunctions.
• Avoid dropping the set as this may cause damage.
Headphones HE 545
• Connect the supplied headphones to the LINE OUT/p
socket of the player.
Note:
LINE OUT/p
player to your HiFi system (with a signal lead) or to
your car radio (with a cassette adapter or signal
lead). In both cases, the volume of the player must
be set to position 8.
Use your head when using headphones
Hearing safety: Do not play your headphones at a high volume. Hearing experts
advise that continuous use at high volume can permanently damage your hearing.
Traffic safety: Do not use headphones while driving a vehicle. It may create a hazard
and it is illegal in many countries. Even if your headphones are an open-air type
designed to let you hear outside sounds, do not turn up the volume so high that you
cannot hear what is going on around you.
can also be used for connecting the
English
11
CD PLAY
Playing a CD
English
This CD-player can play all kinds of Audio Discs such
as CD-Recordables and CD-Rewritables. Do not try to
play a CD-ROM, CDi, VCD, DVD or computer CD.
1 Push the OPEN 2 slider to open the player.
2 Insert an audio CD, printed side up, by pressing the
CD onto the hub.
3 Close the player by pressing the lid down.
4 Press 2; to switch the player on and start playback.
y The current track number and elapsed playing
time are displayed.
• You can pause playback by pressing 2;.
y The time at which playback was paused starts
flashing.
• You can continue playback by pressing 2; again.
5 Press 9 to stop playback.
y The total number of tracks and the total playing
time of the CD are displayed.
6 Press 9 again to switch the player off.
• To remove the CD, hold it by its edge and press the
hub gently while lifting the CD.
Note: If there is no activity, the set will automatically
switch off after a while to save energy.
12
0
CD PLAY
Playback information
• If a CD-Recordable (CD-R) or a CD-Rewritable (CD-RW) is not recorded properly,
nF dISC is displayed, indicating that the CD has not been finalized. In that
case, use FINALIZE on your CD recorder to complete the recording.
• When playing a CD-Rewritable (CD-RW), please note that it takes 3–15 seconds
after pressing 2; for sound reproduction to start.
• Playback will stop if you open the CD lid.
• While the CD is read, 1 -:- flashes in the display.
Volume and bass
Volume adjustment
• Adjust the volume by using VOL E.
Bass adjustment
You can choose between the bass enhancement levels
dbb1 and dbb2.
1 Press BASS once for dbb1 and twice
for dbb2.
y dbb1 or dbb2 is displayed and
is shown.
2 To switch dbb1 or dbb2 off, press BASS
twice or once, respectively.
y goes off.
English
13
FEATURES
Selecting a track and searching
English
Selecting a track during playback
• Briefly press ∞ or § once or several times to skip to
the current, previous or next track.
y Playback continues with the selected track, and
the track’s number is displayed.
Selecting a track when playback is stopped
1 Briefly press ∞ or § once or several times to select
the desired track. The track number is displayed.
2 Press 2; to start CD play.
y Playback starts with the selected track.
Searching for a passage during playback
1 Keep ∞ or § pressed to find a particular passage in
a backward or forward direction.
y Searching starts while playback continues at low
volume. After 2 seconds the search speeds up.
2 Release the button when you reach the desired passage.
y Playback continues from this position.
Notes: – If the player is in SCAN mode (see MODE chapter), searching is not possible.
– In SHUFFLE, SHUFFLE REPEAT ALL or REPEAT mode (see MODE chapter), or
while playing a program, searching is only possible within the particular
track.
14
FEATURES
Programming track numbers
You can store up to 30 tracks to play in a program.
A single track may be stored more than once in the
program.
1 While playback is stopped, select a track with
∞ or §.
2 Press PROGRAM to store the track.
y PROGRAM lights up; the track number
programmed and P with the total number of
stored tracks are displayed.
3 Select and store all desired tracks in this way.
4 Press 2; to start playback of your selected tracks.
y PROGRAM is shown and playback starts.
• You can review the program by pressing PROGRAM for more than 2 seconds.
y The display shows all the stored tracks in sequence.
English
Notes: – If you press
SELECt
– If you try to store more than 30 tracks,
Clearing the program
• While playback is stopped, press 9 to clear program.
y CLEAr is displayed once, PROGRAM goes off,
and the program is cleared.
PROGRAM
is displayed.
and there is no track selected,
FULL
is displayed.
Note: The program will also be cleared if the power supply is interrupted, or if the
CD-player lid is opened, or if the set switches off automatically.
15
FEATURES
Selecting different playing possibilities – MODE
English
It is possible to play tracks in random order, to repeat a single track or the entire CD,
and to play the first few seconds of each track.
1 Press MODE during playback as often as required in
order to activate one of the following ‘modes’. The
active mode is shown in the display.
y SHUFFLE: All tracks of the CD are played in
random order until all of them have been played
once.
y SHUFFLE REPEAT ALL: All tracks of the CD are
played repeatedly in random order.
y REPEAT: The current track is played repeatedly.
y REPEAT ALL: The entire CD is played repeatedly.
y SCAN: The first 10 seconds of each of the
remaining tracks are played in sequence.
2 Playback starts in the chosen mode after 2 seconds.
• To return to normal playback, press MODE repeatedly
until the display shows no active modes.
16
Loading...