Philips AX-1001, AX-1000 Owners Manual

Portable CD player

DIGITAL AUDIO

COMPACT

BASS

DIGITAL

DYNAMIC BASS BOOST

MODE

PROGRAM

CD REWRITABLE COMPATIBLE

PROGRAMMABLE CD PLAYER

PROGRAM

DBB

PROGRAM

DBB

AX1000 AX1001

No abrir, riesgo de choque eléctrico

Verifique que el voltaje de alimentación

sea el requerido para su aparato

ATENCIÓN

Para evitar el riesgo de choque eléctrico, no quite la tapa.

En caso de requerir servicio, dirijase al personal calificado.

PRECAUCIÓN - ADVERTENCIA

México

Es necesario que lea cuidadosamente su instructivo de manejo.

Descripción: Tocadiscos de CD portatil Modelo: AX 1000/01, AX 1000/16,

AX 1001/01, AX 1001/16

Alimentación: 110–127/220–240 V~ 50–60 Hz Consumo: 4 W (AY 3170) Importador: Philips Mexicana, S.A. de C.V. Domicilio: Norte 45, # 669, Col. Industrial Vallejo Localidad y Telefono: C.P. 02300 México D.F., Tel. 5728 4200 Exportador: Philips Electronics Hong Kong, Ltd. País de Origen: China

Nº de Serie: ______________________________

LEA CUIDADOSAMENTE ESTE INSTRUCTIVO

ANTES DE USAR SU APARATO.

English

Controls .................................................6

Quick start .............................................7

Power supply.....................................8–9

CD play..........................................10–11

Français

Informations générales .......................19

Commandes.........................................20

Mise en service rapide........................21

Alimentation électrique ................22–23

Español

Controles .............................................32

Encendido rápido.................................33

Alimentación eléctrica..................34–35

Reproducción de un CD.................36–37

∑

General information ............................45

Controls ...............................................46

Quick start ...........................................47

Power supply.................................48–49

Features.........................................12–15

Troubleshooting.............................16–17

General information ............................18

Lecture CD.....................................24–25

Caractéristiques ............................26–29

Pannes et remèdes .......................30–31

Características ..............................38–41

Localización de averías.................42–43

Información general ............................44

CD play..........................................50–53

Features.........................................54–55

Troubleshooting.............................56–57

English

Français

Español

∑

Guarantees

Polizia de garantía

Mexico.........................................58–59

Philips product warranty for

Australia......................................60–61

Guarantee and service for

New Zealand ....................................62

Garantia e Assistência Técnica

Brasil..................................................63

CONTROLS, refer to the illustration on page 3

1 MODE..............selects the different playing possibilities: SHUFFLE,

English

2 BASS...............switches the bass enhancement on and off. This button also

3 2;...................switches the player on, starts or pauses CD play

4 9 .....................stops CD play, clears a program or switches the player off

5 ........................display

6 ∞....................skips and searches CD tracks backwards

7 §....................skips and searches CD tracks forwards

8 OPEN 2...........opens the CD lid

9 VOL E.........adjusts the volume

0 p/LINE OUT....3.5 mm headphone socket, socket to connect the player to another

! OFF ..................switches RESUME and HOLD off

RESUME..........stores the last position of a CD track played

HOLD...............locks all buttons

@ PROGRAM.......programs tracks and reviews the program

# 4.5V DC...........socket for external power supply

$ ........................typeplate

% ........................battery compartment

SHUFFLE REPEAT ALL, REPEAT and REPEAT ALL

switches acoustic feedback (the beep) on/off when it is pressed for more than 2 seconds

audio input of an additional appliance

This set complies with the radio interference requirements of the

European Community.

1 OPEN 2

3 CD 4 5

HOLD➟OFF

6 7 VOLUME

!!!

AA LR6 UM3

PLAY

p /LINE OUT

QUICK START

English

POWER SUPPLY

Batteries (supplied or optionally available)

English

You can use the following batteries with this CD-player:

• normal batteries type LR6, UM3 or AA (preferably Philips), or

• alkaline batteries type LR6, UM3 or AA (preferably Philips).

Note: – Old and new or different types of batteries should not be used in

combination. Remove batteries if they are empty or if the player is not going to be used for a long time.

Inserting batteries

• Open the battery compartment and insert either 2 normal or alkaline batteries.

Battery indication

The approximate power level of your batteries is shown in the display.

• If is shown or flashing (depending on the version) and bAtt is displayed, the batteries are empty.

Average playing time of batteries under normal conditions Battery type Playing time

Normal 7 hours Alkaline 20 hours

Batteries contain chemical substances, so they should be disposed of properly.

POWER SUPPLY / GENERAL INFORMATION

Mains adapter (supplied or optionally available)

Use only the AY 3170 adapter (4.5 V/300 mA direct current, positive pole to the centre pin). Any other product may damage the player.

1 Make sure that the adapter’s voltage corresponds to

the local voltage.

2 Connect the adapter to the 4.5V DC socket of the

player and to the wall socket.

Note: Always disconnect the adapter when you are not using it.

Headphones HE 545

• Connect the supplied headphones to the p/LINE OUT socket of the player.

Note:

p/LINE OUT

player to your HiFi system (with a signal lead) or to your car radio (with a cassette adapter or signal lead). In both cases, the volume of the player must be set to position 8.

Use your head when using headphones

Hearing safety: Do not play your headphones at a high volume. Hearing experts advise that continuous use at high volume can permanently damage your hearing.

Traffic safety: Do not use headphones while driving a vehicle. It may create a hazard and it is illegal in many countries. Even if your headphones are an open-air type designed to let you hear outside sounds, do not turn up the volume so high that you cannot hear what is going on around you.

can also be used for connecting the

English

CD PLAY

Playing a CD

English

This CD-player can play all kinds of Audio Discs such as CD-Recordables and CD-Rewritables. Do not try to play a CD-ROM, CDi, VCD, DVD or computer CD.

1 Push the OPEN 2 slider to open the CD lid.

2 Insert an audio CD, printed side up, by pressing the

CD onto the hub.

3 Close the player by pressing the lid down.

4 Press 2; to switch the player on and start playback.

y The current track number and elapsed playing

time are displayed.

• You can pause playback by pressing 2;.

y The time at which playback was paused starts

flashing.

• You can continue playback by pressing 2; again.

5 Press 9 to stop playback.

y The total number of tracks and the total playing

time of the CD are displayed.

6 Press 9 again to switch the player off.

• To remove the CD, hold it by its edge and press the hub gently while lifting the CD.

Note: If there is no activity, the set will automatically

switch off after a while to save energy.

MODE

CD PLAY

PROGRAM

MODE

Playback information

• If a CD-Recordable (CD-R) or a CD-Rewritable (CD-RW) is not recorded properly,

nF dISC is displayed, indicating that the CD has not been finalized. In that case, use FINALIZE on your CD recorder to complete the recording.

• When playing a CD-Rewritable (CD-RW), please note that it takes 3–15 seconds after pressing 2; for sound reproduction to start.

• Playback will stop if you open the CD lid.

• While the CD is read, 1 -:- is displayed.

Volume and bass

Volume adjustment

• Adjust the volume by using VOL E.

Bass adjustment

• Press BASS to switch the bass enhancement on or off

y is shown if the bass enhancement is

activated.

English

FEATURES

PROGRAM

MODE

Selecting a track and searching

English

Selecting a track during playback

• Briefly press ∞ or § once or several times to skip to the current, previous or next track.

y Playback continues with the selected track, and

the track’s number is displayed.

Selecting a track when playback is stopped 1 Briefly press ∞ or § once or several times to select

the desired track. The track number is displayed.

2 Press 2; to start CD play.

y Playback starts with the selected track.

Searching for a passage during playback 1 Keep ∞ or § pressed to find a particular passage in

a backward or forward direction.

y Searching starts while playback continues at low

volume. After 2 seconds the search speeds up.

2 Release the button when you reach the desired passage.

y Playback continues from this position.

Notes: – In SHUFFLE, SHUFFLE REPEATALL or REPEAT mode (see MODE chapter), or

while playing a program, searching is only possible within the particular track.

FEATURES

Programming track numbers

You can store up to 15 tracks to play in a program. A single track may be stored more than once in the program.

1 While playback is stopped, select a track with

∞ or §.

2 Press PROGRAM to store the track.

y PROGRAM lights up; the track number

programmed and P with the total number of stored tracks are displayed.

3 Select and store all desired tracks in this way.

4 Press 2; to start playback of your selected tracks.

y PROGRAM is shown and playback starts.

• You can review the program by pressing PROGRAM for more than 2 seconds.

y The display shows all the stored tracks in sequence.

MODE

English

PROGRAM

Notes: – If you press

SELECt

– If you try to store more than 15 tracks,

PROGRAM

is displayed.

and there is no track selected,

FULL

is displayed.

Clearing the program

• While playback is stopped, press 9 to clear program.

y CLEAr is displayed once, PROGRAM goes off,

and the program is cleared.

Note: The program will also be cleared if the power supply is interrupted, or if the

CD-player lid is opened, or if the set switches off automatically.

FEATURES

Selecting different playing possibilities – MODE

English

It is possible to play tracks in random order, to repeat a single track or the entire CD.

1 Press MODE during playback as often as required in

order to activate one of the following ‘modes’. The active mode is shown in the display.

y SHUFFLE: All tracks of the CD are played in

random order until all of them have been played once.

y SHUFFLE REPEAT ALL: All tracks of the CD are

played repeatedly in random order.

y REPEAT: The current track is played repeatedly. y REPEAT ALL: The entire CD is played repeatedly.

2 Playback starts in the chosen mode after 2 seconds.

• To return to normal playback, press MODE repeatedly until the display shows no active modes.

MODE

PROGRAM

FEATURES

RESUME and HOLD

You can interrupt playback and continue (even after an extended period of time) from the position where playback stopped (RESUME) and you can lock all buttons of the set so that no action will be executed (HOLD). Use the RESUME–HOLD–OFF slider for these functions.

RESUME – continuing from where you have stopped 1 Switch the slider to RESUME during playback to activate RESUME.

y RESUME is shown.

2 Press 9 whenever you want to stop playback.

3 Press 2; whenever you want to resume playback.

y RESUME is shown and playback continues from

where you have stopped.

• To deactivate RESUME, switch the slider to OFF.

y RESUME goes off.

HOLD – locking all buttons

You can lock the buttons of the set by switching the slider to HOLD. Now, when a key is pressed, no action will be executed. This is of use, for example, when transporting the player in a bag. With HOLD activated, you can avoid accidental activation of other functions.

1 Switch the slider to HOLD to activate HOLD.

y All buttons are locked. HoLd is shown when

you press any button. If the set is switched off, HoLd will be shown only when 2; is pressed.

2 To deactivate HOLD, switch the slider to OFF.

English

Note: If you deactivate

activating the

RESUME

HOLD

by switching the slider to function.

RESUME,

you will be

TROUBLESHOOTING

English

WARNING

Under no circumstances should you try to repair the set yourself as this will invalidate the guarantee.

Problem Possible cause Solution

No power, Batteries playback does Batteries inserted incorrectly Insert the batteries not start correctly.

Batteries are empty. Change the batteries. Contact pins are dirty. Clean them with a cloth.

Mains adapter

Loose connection Connect the adapter

nF dISC CD-RW (CD-R) is not recorded Use FINALIZE on the indication properly. CD recorder to complete

no dISC The CD is badly Replace or clean the CD. indication scratched or dirty.

CD is not or incorrectly inserted. Insert a CD, label upwards. The laser lens is steamed up. Wait until the lens has

HoLd indication HOLD is activated. Deactivate HOLD. and/or no reaction to controls

Electrostatic discharge Disconnect the set from

securely.

the recording.

cleared.

power supply or take out the batteries for a few seconds.

+ 37 hidden pages

Philips AX-1001, AX-1000 Owners Manual

Specifications and Main Features

Frequently Asked Questions

User Manual