Philips AJL308 User Manual

Clock Radio

www.philips.com/welcome

QUICK START

AJ3600

AJL308

Thanks for buying Philips AJL308 clock radio.

Our Quick Start guides you through just some of the features on the set.

Please read our instruction booklet to really rise & shine!

English

I. Connecting power

• Connect the supplied mains adapter to the set’s

9V DC jack and the plug into a wall outlet.

II. Setting time and date

1. Press MENU.

2. Use 1 2 to highlight “Clock”.

3. Use 3 4 to select a field of “Time Set” and “Date

(Year-Month-Day)”.

4. Press OK to confirm.

5. Press or hold down 3 4 to set the values.

6. Press OK to confirm.

7. Repeat Steps 3-6 to set other values of “Time Set

and “Date (Year-Month-Day)”.

8. After finishing the setting, press CLOCK,

TUNER, PHOTO/VIDEO or MUSIC to exit

the setup menu.

Helpful hint:

In the clock mode, to zoom the picture displayed, press and hold CLOCK for around 2 seconds, then press OK repeatedly to enlarge picture or resume to normal size, and use 1 2 3 4 to pan the enlarged picture through. To exit the zoom mode, press CLOCK again.

IV. Switching off the alarm

• During alarm call, press any button except REPEAT ALARM /

➜ Alarm will auto reset daily.

OR,

• Press REPEAT ALARM /

to enable repeat alarm in 9 minutes.

• To switch off alarm completely, press ALARM 1

or ALARM 2 repeatedly until

➜ When alarm is deactivated,

is activated,

Helpful hint:

• During alarm call, if no button is pressed, alarm call will last 30 minutes.

• To set the alarm sound with specific music, select desired music in the “Alarm Music” of the Clock menu.

BRIGHTNESS CONTROL

displays.

BRIGHTNESS CONTROL

is changed

displays. When it

Before zoom

After zoom

III. Setting/Activating alarm time

You can set two different alarm times.

1. Press CLOCK.

2. Hold down ALARM 1 or ALARM 2 for about 2

seconds, then release.

3. Press or hold down 3 4 to set hour.

4. Press ALARM 1 or ALARM 2 to confirm.

5. Press or hold down 3 4 to set minute.

6. Press ALARM 1 or ALARM 2 to confirm.

7. Press again ALARM 1 or ALARM 2 to activate

alarm setting.

➜ When alarm is activated,

displays.

V. Tuner

1. Press TUNER.

2. Press MENU.

➜The Tuner menu appears.

3. Press 4 to select “Tuner Auto Program”.

4. Press OK to start the auto search and

programming. ➜ 20 available stations are programmed (FM).

5. Press 3 4 once or more to select your desired station.

• In TUNER mode, to turn off radio, press OK. To turn on radio, press OK again.

• To auto tune to a radio station, press and hold press and hold 1 2 for about 2 seconds, then release. (To store particular station, refer to “Manual programming” of Tuner section in the user manual.)

+ 2 hidden pages