Always there to help you
Register your product and get support at
www.philips.com/welcome
Question?
Contact
Philips
AJ7260D
User manual
Contents
1 Important 2
Safety 2
Notice 3
2 Your Docking Entertainment System 5
Introduction 5
What's in the box 5
Overview of the main unit 6
3 Get started 8
Install batteries 8
Connect po
Turn on 8
Set time and date 9
4 Play 10
Play from iPod/iPhone/iPad 10
Pla
y from an external device 11
5 Listen to radio 12
Tune to a radio station 12
Progr
wer 8
am radio stations 12
6 Other features 13
Set the alarm timer 13
7 Adjust sound 15
Adjust volume level 15
Select a sound eff
ect 15
8 Product information 16
SpeciÀcations 16
9 Troubleshooting 17
1EN
1 Important
Safety
Know these safety symbols
This 'bolt of lightning' indicates uninsulated
material within your unit may cause an electrical
shock. For the safety of everyone in your
household, please do not remove product
covering.
The 'exclamation point' calls attention to
features for which you should read the enclosed
literature closely to prevent operating and
maintenance problems.
WA5NIN* To reduce the risk of Àre or electric
shock, this apparatus should not be exposed to
rain or moisture and objects Àlled with liTuids,
such as vases, should not be placed on this
apparatus.
CAUTION: To prevent electric shock, match
wide blade of plug to wide slot, fully inser t.
Important Safety Instructions
a Read these instructions.
b Keep these instructions.
c Heed all warnings.
d Follow all instructions.
e Do not use this apparatus near water.
f Clean only with dry cloth.
g Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
h Do not install near any heat sources such
as radiators, heat registers, stoves, or
RWKHUDSSDUDWXVLQFOXGLQJDPSOLÀHUVWKDW
produce heat.
i Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and the
point where they exit from the apparatus.
j Only use attachments/accessories
VSHFLÀHGE\WKHPDQXIDFWXUHU
k Unplug this apparatus during lightning
storms or when unused for long periods
of time.
l 5HIHUDOOVHUYLFLQJWRTXDOLÀHGVHUYLFH
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
m Apparatus shall not be exposed to
dripping or splashing.
n Do not place any sources of danger on
WKHDSSDUDWXVHJOLTXLGÀOOHGREMHFWV
OLJKWHGFDQGOHV
o Where the MAINS plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
2 EN
Caution
Remove battery if it is exhausted or will not be used
•
for a long time.
• Batteries contain chemical substances, so they should
be disposed of properly.
• Perchlorate Material-special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate.
• Batteries (battery pack or batteries
installed) shall not be exposed to excessive
heat such as sunshine, Àre or the like.
• Battery usage CAUTION – To prevent
battery leakage which may result in bodily
injury, proper ty damage, or damage to the
remote control:
• Do not mix batteries (old and new or
carbon and alkaline, etc.).
• Remove batteries when the remote
control is not used for a long time.
• Make sure that there is enough free space
around the product for ventilation.
Warning
•
Never remove the casing of this apparatus.
• Never lubricate any part of this apparatus.
• Never place this apparatus on other electrical
eTuipment.
• Keep this apparatus away from direct sunlight, naked
Áames or heat.
• Ensure that you always have easy access to the power
cord, plug or adaptor to disconnect the apparatus from
the power.
• Use only power supplies listed in the user manual.
Notice
Any changes or modiÀcations made to this
device that are not expressly approved by
WOOX Innovations may void the user’s
authority to operate the eTuipment.
Disposal of your old product
Your product is designed and manufactured
with high Tuality materials and components,
which can be recycled and reused.
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products. The correct
disposal of these products helps prevent
potentially negative conseTuences on the
environment and human health.
Please visit www.recycle.philips.com for
additional information on a recycling center in
your area.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
eTuipment.
“Made for iPod,” “Made for iPhone,” and “Made
for iPad” mean that an electronic accessory
has been designed to connect speciÀcally to
iPod, iPhone, or iPad, respectively, and has
been certiÀed by the developer to meet
Apple performance standards. Apple is not
responsible for the operation of this device
or its compliance with safety and regulatory
standards. Please note that the use of this
accessory with iPod, iPhone, or iPad may affect
wireless performance.
iPod and iPhone are trademarks of Apple Inc.,
registered in the U.S. and other countries. iPad
is a trademark of Apple Inc.
Class II equipment symbol:
3EN
CLASS II apparatus with double insulation, and
no protective earth provided.
Note
The type plate is located on the bottom of the unit.
•
4 EN
2 Your Docking
Entertainment
System
Congratulations on your purchase, and
welcome to Philips To fully beneÀt from the
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With this unit, you can enjoy music from iPod/
iPhone/iPad and listen to radio or other audio
devices.
Your iPod/ iPhone/iPad and radios can be set as
alarm sources. You can set two alarms to go off
at different time.
You can enrich sound output with these sound
effects:
• Digital Sound Control (DSC)
• Dynamic Bass Boost (DBB)
What's in the box
Check and identify the contents of your
package:
• Main unit
• Short user manual
•
5EN
Overview of the main unit
q
p
FM
ANTENNA
a
b
c
d
e
f
g
VOL
SET
TIME
PROG
SCAN
VOL
a VOL +/VOL -
• Increase/decrease volume.
b
DOCK 1
• In Dock 1 mode, start or pause play.
• In other modes, select Dock 1 source.
c SET TIME
• In standby mode, set day, month and
year.
• In other modes, enable/disable DBB
(Dynamic Bass Boost) or select a DSC
(Digital Sound Control) sound effect.
IOIDUA
N
SNOOZE
AL
1
BRIGHTNESS
~
AC
o
n
TUNE
PRE
SET
AL2
• In dock mode, press and hold to
• In FM mode, select FM stereo or FM
d PROG/SCAN
• Program radio stations.
• Automatically scan for radio stations.
• In dock mode, press and hold to
e
/SOURCE
• Press and hold to turn on the unit or
PRE
SET
TUNE
search within a track.
mono.
search within a track.
switch to standby mode.
m
l
k
j
i
f
h
6 EN
• Stop alarm.
• Select a source: DOCK 1/DOCK 2, FM
or AUDIO IN.
f AL1/AL2
• Set alarm.
• View alarm settings.
• Activate/deactivate alarm timer.
g Display panel
• Show the current status.
h SNOOZE/BRIGHTNESS
• Snooze alarm.
• Adjust the display brightness.
i SLEEP
• Set the sleep timer.
j PRESET +/PRESET -
• Skip to next/previous track.
• Select a preset radio program.
• In dock mode, press and hold to
search within a track.
k OK/
DOCK 2
• In Dock 2 mode, start or pause iPod/
iPhone/iPad play.
• In other modes, select Dock 2 mode.
l TUNE+/TUNE-
• Set time and date.
• When setting alarm, adjust alarm clock
and volume, and select a sound source.
• Tune to an FM audio station.
m Dock 1 for iPod/iPhone/iPad with
Lightning connection
n Dock 2 for iPod/iPhone/iPad with 30-pin
connection
o USB charging port
p AUDIO IN
• Connect external audio device.
q FM ANTENNA
• Connect an FM antenna to improve
FM reception.
7EN
3 Get started
Caution
Use of controls or adjustments or performance of
•
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
seTuence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
bottom of the apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Install batteries
Note
You can only use AC power as power supply. Batteries
•
(not supplied) are for backup purpose.
Caution
Risk of explosion! Keep batteries away from heat,
•
sunshine or Àre. Never discard batteries in Àre.
• Risk of decreased battery life! Never mix different
brands or types of batteries.
• Risk of product damage! When the remote control is
not used for long periods, remove the batteries.
Connect power
Caution
Risk of product damage! Ensure that the power voltage
•
corresponds to the voltage printed on the bottom of
the apparatus.
• Risk of electric shock! When you unplug the AC power
cord, always pull the plug from the socket. Never pull
the cord.
• Before connecting the AC power cord, ensure you have
completed all other connections.
• To disconnect the set from the mains completely,
remove the mains plug from the wall socket.
FM
ANTENNA
~
5V1.2
A
AC
N
I
I
O
D
U
A
1 Open the battery compartment.
2 Insert 2 x AA size batteries with correct
polarity (+/-) as indicated.
3 Close the battery compartment.
8 EN
Connect the AC power cord to the wall outlet.
Turn on
Press and hold .
» The unit switches to the last selected
source.
Switch to standby
Press and hold again to switch the unit to
standby mode.
» The time and date (if set) appear on
the display panel.
Select source
Press SOURCE repeatedly to select from
DOCK 1/Dock 2, FM and AUDIO IN.
Set time and date
1
In standby mode, press and hold SET TIME
for 2 seconds.
» [24H ] begins to blink, and you can
hear a beep.
2 Press TUNE+ or TUNE- to select the
12/24 hour format.
3 Press OK to conÀrm.
» 00:00 will display, and the hour digits
begin to blink.
4 Repeat steps 2-3 to set the hour, minute,
day, month and year.
Tip
In 12 hour format, [MONTH--DAY] is displayed.
•
• in 24 hour format, [DAY--MONTH] is displayed.
Note
When iPod/iPhone/iPad is connected, the docking
•
unit synchronizes time from the iPod/iPhone/iPad
automatically.
9EN
4 Play
Play from iPod/iPhone/iPad
You can enjoy audio from iPod/iPhone/iPad
through this unit.
Compatible iPod/iPhone/iPad
The integrated dual dock unit supports the
following iPod, iPhone, and iPad models:
Made for (Dock 1):
• iPod nano (7th generation)
• iPod touch (5th generation)
• iPad (4th generation)
• iPad mini
• iPhone 5
Also made for (Dock 2):
• iPod nano (2nd/3rd/4th/5th/6th
generation)
• iPod classic
• iPod touch (1st/2nd/3rd/4th generation)
• iPad (3rd generation)
• iPad 2
• iPad
• iPhone 4S
• iPhone 4
• iPhone 3GS
• iPhone 3G
• iPhone
• To pause/resume play, press .
• To skip to a track, press
• To search during play, press and hold
/ or PRESET +/PRESET -, then
release to resume normal play.
Charge the iPod/iPhone/iPad
When the unit is connected to power, the
docked iPod/iPhone/iPad begins to charge.
Tip
For certain iPod models, it may take up to a minute
•
before the charging indication appears.
/ .
Listen to the iPod/iPhone/iPad
1 Press SOURCE repeatedly to select
DOCK 1 or DOCK 2 mode.
2 Place the iPhone/iPod/iPad into the Dock
1 or Dock 2.
10 EN
Play from an external device
You can also listen to an external audio device
through this unit.
1 Press SOURCE repeatedly to select the
AUDIO IN source.
2 Connect a 3.5mm audio link cable (not
supplied) to:
• the AUDIO IN jack (3.5mm) on the
back of the unit.
• the headphone jack on an external
device.
» the screen displays scrolling text
message [AUDIO IN]; and shows date
and time.
3 Start to play the device (see the device
user manual).
11EN
5 Listen to radio
Note
Only FM radio reception is available on this unit.
•
Note
The preset list can store up to 20 stations.
•
• If the preset list is fully occupied, the screen will show
P 20.
• If saving a radio station to a position that has already
been occupied, the original radio station will be
replaced.
Tune to a radio station
Tip
Use an FM antenna for optimal reception. Fully extend
•
and adjust the position of the antenna.
• Position the antenna as far as possible from TV, VCR or
other radiation source.
• [STEREO] is default setting for tuner mode.
• In tuner mode, you can press and hold DBB/DSC/SET
TIME to toggle between [STEREO] and [MONO], and
the unit memorizes your setting even if you turn off the
unit or turn to other sources.
1 Press SOURCE repeatedly to select FM
mode.
2 Press and hold TUNE+/TUNE- for more
than 2 seconds.
» The radio tunes to next station with
strong reception automatically.
3 Repeat step 2 to tune to more stations.
• To tune to a weak station, press
TUNE+/TUNE- repeatedly until you
Ànd optimal reception.
Program radio stations
Radio station preset allows you to save radio
stations, and Tuickly tune to a favorite station.
Program radio stations manually
1. Press SOURCE repeatedly to enter the FM
mode.
2. Press TUNE+/TUNE- to tune to a radio
station.
3. Press PROG/SCAN.
» A position number Áashes.
4. Press OK to save current radio station to the
selected position.
Tip
Press PRESET +/PRESET - to change the position to
•
save a radio station.
Program radio stations automatically
1 Press SOURCE repeatedly to enter the
FM mode.
2 Press and hold PROG/SCAN.
» The screen displays [AUTO] (auto);
» The unit starts to scan for all available
radio stations automatically, and stores
them to the preset list.
3 Wait until the auto scan Ànishes.
» The Àrst station in the preset list
broadcasts automatically.
Select a preset radio station
1 Press / to select a preset number.
12 EN
6 Other features
Set the alarm timer
You can set two alarms at different times.
Note
Ensure that you have set the clock correctly.
•
1 Press and hold AL1 or AL2.
» The hour digits begin to blink, and you
can hear one beep.
» [AL SET] (alarm set) Áashes on the
screen.
2 Press TUNE+/TUNE- repeatedly to set
the hour.
3 Press OK to conÀrm.
» The minute digits begin to blink.
» [AL SET] (alarm set) Áashes on the
screen.
4 Repeat steps 2-3 to set the minute, select
when to ring alarm, and choose alarm
sound source and alarm volume.
After alarm volume is set, the unit will exit
alarm setting, and you can hear two beeps.
Activate and deactivate the alarm timer
When an alarm setting is shown on the screen,
press AL1/AL2 repeatedly to activate or
deactivate the timer.
» If the timer is activated, [
[
AL2] is displayed.
» If the timer is deactivated, [
or [
AL2] disappears.
AL 1] or
AL1]
Snooze
When the alarm rings, press SNOOZE.
» The alarm stops, and the alarm icon
Áashes.
» The alarm will resume ringing 9
minutes later.
Note
When using batteries to operate, alarms can only use
•
buzzer as sound source.
Stop alarm ring
When the alarm rings, press the corresponding
AL1 or AL2.
» The alarm stops but the alarm
settings remain.
Tip
If you select DOCK 1/DOCK 2 as alarm sound
•
source, when there is no device docked, the alarm will
automatically switch to buzzer to ring the alarm.
• If both alarms are set to the same time, only Alarm 1
will ring.
View the alarm settings
Press AL1 or AL2 to view alarm settings.
Tip
You can also press to stop the alarm. The unit will
•
switch to the last selected source.
• If you press and hold , the alarm will also be stopped,
and the unit will switch to standby mode.
• If you do not stop the alarm, it will ring for 30 minutes.
• When an alarm rings, it shall begin from a relative low
volume, and rise gradually to the highest alarm volume
in 90 seconds.
13EN
Set the sleep timer
This unit can switch to standby automatically
after a set period of time.
Press SLEEP repeatedly to select from 120, 90,
60, 45, 30 and 15 minutes.
» When the sleep timer is activated, the
display shows
To deactivate sleep timer
.
1 Press SLEEP repeatedly until [OFF] (off) is
displayed.
» The sleep timer is deactivated,
disappears on the display.
Adjust display brightness
When no alarm is Àring, press BRIGHTNESS
repeatedly to select different levels of display
brightness.
Note
When using batteries to operate, you can not select
•
brightness levels.
14 EN
7 Adjust sound
Adjust volume level
During play, press VOL +/- to increase/decrease
the volume level step by step.
Tip
Press and hold VOL +/- to increase/decrease the
•
volume at faster speed.
Select a sound effect
During play, press SET TIME repeatedly to
select from a preset sound effect and turn on/
off dynamic bass enhancement.
Note
The unit supports the following sound effects: [POP]
•
(pop), [JAZZ] (Jazz), [ROCK] (rock), [CLAS] (classic)
and [FLAT] (Áat).
• If DBB is activated, [DBB] is displayed.
15EN
8 Product
information
Note
Product information is subject to change without prior
•
notice.
6SHFLÀFDWLRQV
$PSOLÀHU
Total output power 8 W
FreTuency Response 80 Hz -16 kHz,
±3dB
Signal to Noise Ratio 67dBA
Aux Input (Audio in) 0.6 V RMS
20kohm
FM
Tuning Range FM 76.0 -
90 MHz
Tuning grid 50 KHz
- Mono, 26dB Tuieting sensitivity
- Stereo, 46dB Tuieting sensitivity
Search Sensitivity <41 dBf
Total Harmonic Distortion <2%
Signal to Noise Ratio >45 dB
<22 dBf
<51 dBf
General information
AC power 100V~,50/60 Hz
Operation Power
Consumption
Standby Power
Consumption (clock
display)
Dimensions
- Main Unit (W x H
x D)
Weight (Main unit,
without packing)
44 W
<1 W
260 x 138 x 185 mm
1.13 kg
Speakers
Speaker Impedance 4 ohm
Speaker Driver 57 mm
Sensitivity >84dB/m/W
16 EN
9 Troubleshooting
Caution
Never remove the casing of this apparatus.
•
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
reTuesting service. If the problem remains
unsolved, go to the philips web site (www.
philips.com/support). When you contact philips,
ensure that your apparatus is nearby and the
model number and serial number are available.
No power
• Ensure that the AC power plug of the unit
is connected properly.
• Ensure that there is power at the AC
outlet.
• Ensure that the batteries are inserted
correctly.
No sound
• Adjust the volume.
• Check if the unit is performing auto scan.
Volume is muted during auto scan process.
No response from the unit
• Remove the batteries from the main unit
(if inserted), disconnect and reconnect the
AC power plug, and turn on the unit again.
Poor radio reception
• Increase the distance between the unit and
your TV or VCR.
• Fully extend the FM antenna.
Timer does not work
• Set the clock correctly.
• Switch on the timer.
Clock/timer setting erased
• Power has been interrupted or the power
plug has been disconnected.
• Reset the clock/timer.
17EN
Specifications are subject to change without notice
2014 © WOOX Innovations Limited. All rights reserved.
Philips and the Philips’ Shield Emblem are registered
trademarks of Koninklijke Philips N.V. and are used by WOOX
Innovations Limited under license from Koninklijke Philips N.V.
AJ7260D_11_UM_EN_V2.0
Loading...