Philips AJ3916-05 User Manual

Thanks for buying Philips AJ3916 series CD clock radio.

Our Quick Start guides you through just some of the features on the set.

Please read our instruction booklet to really rise & shine!

Quick start

AJ3916

Printed in China Jason-0809

Press the PRESET +/- buttons once or more until the desired preset station is displayed.

Autostore

1 Press repeatedly SOURCE to select FM or MW.

2 Press and hold PROG until the frequency in the display starts r unning.

➜ Available stations are programmed (MW or FM). After all stations are stored.

To listen to a preset or autostore station

Radio

Clock/Alarm

Press STANDBY-ON to switch on from clock mode.2.If CD is not selected, press SOURCE once or more to select it.

Lift the CD door to open.

Insert a CD with printed side facing up, and close the CD door.5.Press ); to start playback.

To stop playback, press 9.

•

CONTROL.

To deactivate the alarm completely, press once corresponding ALARM 1 or ALARM 2 untill

disappears.

CD playback

This CD clock radio supports audio discs including CD-R (CD-recordable), CD-RW (CD-rewritable).

3.Ways to switch off the alarm

•

To activate ‘Alarm Reset’ during the alarm call, press SLEEP.• To activate ‘Alarm Repeat’ during the alarm call, press REPEAT ALARM/BRIGHTNESS

For ALARM only – Selecting the Alarm mode

or a buzzer.

Press SOURCE repeatedly to select the desired alarm sound among Sound of nature, CD, Radio

Press repeatedly, or hold down ∞ / § to adjust the minutes.

Press MODE or corresponding ALARM 1/ ALARM 2 to confirm the minute setting.

clock digits for minute flashes.

Setting the Clock/Alarm time

Press and hold MODE or ALARM 1/ ALARM 2 until clock digit for hour flashes.

Press repeatedly, or hold down ∞/ § to adjust the hours.3.Press MODE or corresponding ALARM 1/ ALARM 2 to confirm the hour setting, and the

English