GoSure
ADR800sp
User Manual
Automotive Driving Recorder
contents
1. Product overview............................................................1
2. Quick start.......................................................................2
3. GoSure ADR800sp user interface....................................4
4. GoSure ADR800sp system settings.................................5
4.1 Set date and time.......................................5
4.2 Function setting..........................................6
5. Device operating instructions..........................................8
5.1 Device button icons....................................8
5.2 Recording video..........................................8
6. Additional functions..........................................................9
6.1 Driver fatigue alert.......................................9
7. Technical specification....................................................10
Product Overview / Device display1
1
2
3
4
5
6
1. Suction cup holder
2. Speaker
3. Lens
4. Microphone
5. Micro SD card slot
6. Power button
7. Recording indicator
7
8
9
10
11
12
13
14
8. Power indicator
9. Micro USB port
10. Reset button
11. Enter button(OK)
12. Down button
13. Up button
14. Emergency/Return button
Bracket with suction cup x 1 Charger x 1
1
Quick Start2
Insert SD Memory Card
Insert the memory card with the golden contacts side of the card
facing the front of the LCD.
About the Micro SD card
1. Please use a Micro SD card with a capacity of at least 16GB,
Class 10 (maximum 32GB).
Format your Micro SD card before first use by selecting
2.
“format SD card ” in the system settings of your GoSure device.
3. The relationship between card capacity and recording time is given
below.
Micro SD card
Capacity
16GB
1080P/30fps
160 minutes
720P/30fps
320 minutes
32GB
320 minutes
2
640 minutes
1. Install the suction cup
bracket onto the device.
2. Find a suitable position on
your windshield and lock
the suction cup.
3. Adjust the position of the
device within the mount to
ensure you’re recording
a clear view of the road.
4. Connect the USB cable to
the Micro USB socket of
the device.
5. Plug the other end of this
car charger into the socket
of your vehicle's cigarette
lighter.(running the wire
under the glove box and
around the edge of the
windshield).
6. Now your Philips GoSure will
automatically turn on when you
start your engine and will stop
recording when you turn it off
again.
Note:
1. Please use our dedicated car
charger to avoid any device
incompatibility issues.
2. If the car power supply does not
turn off automatically, it is
recommended that you
disconnect the device’s charger
manually, to avoid draining your
car’s battery.
3. To avoid damaging the video,
please unplug your car charger
before inserting or removing
your SD memory card.
4. To remove the SD card, simply
press down on the card and it
will eject from the card slot
automatically.
3
GoSure ADR800sp User interface 3
1 2 3 4 5
02:03:01
35
11
2018/06/11 09:32:20
10
789
No. description
1 Recording/Stop indicator
2 Recording time
3 Resolution indicator
4 Voice recording ON/OFF indicator
5 Motion Detection ON/OFF indicator
6 Menu indicator
7 Playback indicator
8 Recording start / stop indicator
9 Emergency indicator
10 Date/Time stamp
11 Fatigue index
6
4
GoSure ADR800sp system settings4
Press the OK button to open the menu list, allowing you
to adjust various device settings.
4.1 Set the Date and Time
1. Press
2. Press ▲/▼ to select clock icon and then press
OK to enter date and time setting page.
OK to open the on-screen display menu.
Setting 2/4
Collision Detection
Language
Date/Time
LCD Auto Off
Setting
Collision Detection
2018 / 06 / 12
Language
11 ： 57 ： 33
Date/Time
YY/MM/DD
LCD Auto Off
3. To adjust date and time field, press ▲/▼ to select
the field.
4. Press ▲/▼ to select the value.
5. Repeat steps 3-4 to adjust other fields.
6. Press to save your changes.
5
Loading...