Introduction 5
What's in the box 5
What else you need 5
Overview of the main unit 6
Get started to use AirPlay 6
3 Prepare 7
Connect power 7
Turn AD7050W on 7
4 Connect to your home Wi-Fi
network for AirPlay 8
Method 1: Use iOS5 Wi-Fi network
login sharing 8
Method 2: Connect to a WPS router 9
Method 3: Connect to a non-WPS
Wi-Fi router 10
5 Play 18
Stream audio from your iTunes music
library to AD7050W 18
Use advanced sound settings 20
Play/charge your iPod/iPhone/iPad
through USB socket 20
Play from an external device 21
8 Troubleshooting 25
6 Updatermware 22
Download the update le 22
Update from the conguration page 22
7 Product information 24
Specications 24
1EN
1 Important
Safety
Information for Europe:
Know these safety symbols
h Do not remove the casing of this product.
i Do not expose the product to dripping
/ splashing water, rain or high humidity.
j Keep this product away from direct
sunlight,nakedamesorheat.
k Do not install near any heat
sources such as radiators, heat
registers, stoves, or other electrical
equipment(includingampliers).
l Do not place any other electrical
equipment on the product.
m Do not place any sources of
danger on the product (e.g. objects
containingliquids,burningcandles).
n Where the mains plug or an appliance
coupler is used as the disconnect
device, the disconnect device
shall remain readily operable.
The 'exclamation mark' calls attention to
features for which you should carefully
read the supplied literature to prevent
operating and maintenance problems.
The 'lightening bolt' symbol indicates
uninsulated components within the product
that can cause an electric shock.
To reduce the risk of re or electric shock,
do not expose the product to rain or
moisture and do not place any objects lled
with liquids, such as vases, on the product.
a Read these instructions.
b Keep these instructions.
c Heed all warnings.
d Follow all instructions.
e Do not use this product near water.
f Clean only with dry cloth.
g Do not block any ventilation
openings. Install in accordance with
the manufacturer's instructions.
2EN
Warning
• Never remove the casing of this apparatus.
• Never lubricate any part of this apparatus.
• Never place this apparatus on other electrical
equipment.
• Keep this apparatus away from direct sunlight, naked
ames or heat.
• Ensure that you always have easy access to the power
cord, plug or adaptor to disconnect this apparatus from
the power.
Risk of overheating! Never install this
apparatus in a conned space. Always
leave a space of at least four inches around
this apparatus for ventilation. Ensure
curtains or other objects never cover
the ventilation slots on this apparatus.
Notice
Hereby, WOOX Innovations declares
that this product is in compliance with
the essential requirements and other
relevant provisions of Directive 1999/5/
EC. You can nd the Declaration of
Conformity on www.philips.com/support.
Any changes or modications made to this
device that are not expressly approved by
WOOX Innovations may void the user’s
authority to operate the equipment.
Philips and the Philips’ Shield Emblem are
registered trademarks of Koninklijke Philips N.V.
and are used by WOOX Innovations Limited
under license from Koninklijke Philips N.V.”
Specications are subject to change without
notice. WOOX reser ves the right to change
products at any time without being obliged
to adjust earlier supplies accordingly.
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin
symbol is attached to a product it
means that the product is covered by
the European Directive 2002/96/EC.
Please inform yourself about the
local separate collection system for
electrical and electronic products.
Please act according to your local rules and
do not dispose of your old products with
your normal household waste. Correct
disposal of your old product helps to
prevent potential negative consequences
for the environment and human health.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy
to separate into three materials: cardboard
(box), polystyrene foam (buffer) and
polyethylene (bags, protective foam sheet.)
Your system consists of materials which
can be recycled and reused if disassembled
by a specialized company. Please observe
the local regulations regarding the
disposal of packaging materials, exhausted
batteries and old equipment.
“Made for iPod,” “Made for iPhone,” and
“Made for iPad” mean that an electronic
accessory has been designed to connect
specically to iPod, iPhone, or iPad, respectively,
and has been certied by the developer to
meet Apple performance standards. Apple
is not responsible for the operation of this
device or its compliance with safety and
regulatory standards. Please note that the
use of this accessory with iPod, iPhone, or
iPad may affect wireless performance.
AirPlay, iPod, and iPhone are trademarks of
Apple Inc., registered in the U.S. and other
countries. iPad is a trademark of Apple Inc.
Class II equipment symbol:
3EN
CLASS II apparatus with double insulation,
and no protective earth provided.
Note
• The type plate is located on the bottom of the
apparatus.
4EN
2 Your
Entertainment
System
Congratulations on your purchase, and
welcome to Philips! To fully benet from
the support that Philips offers, register your
product at www.philips.com/welcome.
If you contact Philips, you will be asked
for the model and serial number of
this apparatus. The model number and
serial number are on the bottom of the
apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Introduction
Apple AirPlay technology enables you to
play your iTunes music library, hosted on a
Mac, PC, iPhone, iPod touch, or iPad on any
AirPlay-enabled device (for example, your
AD7050W) connected to the Wi-Fi network.
With an AirPlay-enabled device (for
example, your AD7050W), you can:
• stream audio from your iTunes music
library to any room in your house
• choose which AirPlay-enabled
devices you want to play music
on (if you have more than one
such devices in your house)
• stream audio to multiple AirPlayenabled devices at the same
time (from the iTunes music
library on your PC/Mac only)
Tip
• Please visit www.philips.com/welcome for information
about more Philips AirPlay-enabled devices.
With AD7050W, you can also:
• charge your iPod/iPhone/iPad through
the USB socket with an Apple USB
cable (not supplied).
• play your iTunes music library on
your iPod/iPhone/iPad through the
USB socket directly while charging.
• play music from other audio devices
through the MP3-LINK socket.
What's in the box
Check and identify the contents
of your package:
• Main unit (with a built-in Wi-Fi
module)
• 1 x AC power adapter
• 1 x MP3 link cable
• User manual (on CD-ROM)
• Quick start guide
What else you need
To stream audio wirelessly by AirPlay, you need:
• A Wi-Fi cer tied router
• A host for your iTunes music library,
for example, an iPod touch/iPhone/
iPad installed with iOS 4.3.3 (or
later) or a Wi-Fi enabled PC/Mac
installed with iTunes 10.2.2 (or later)
Your AD7050W should be connected to
the same local network as your iTunes
host device through the Wi-Fi router.
List of compatible iTunes host devices
for AirPlay
In terms of AirPlay, AD7050W
is compatible with:
• a Wi-Fi enabled PC/Mac installed with
iTunes 10.2.2 (or later); and
5EN
• the following iPod/iPhone/iPad models
installed with iOS 4.3.3 (or later):
Made for
• iPhone 5
• iPhone 4S
• iPhone 4
• iPhone 3GS
• iPad (4th generation)
• iPad mini
• iPad (3rd generation)
• iPad 2
• iPad
• iPod touch (5th generation)
• iPod touch (4th generation)
• iPod touch (3rd generation)
Overview of the main unit
VOL
power
a VOL +/-
• Adjust volume.
• Press and hold both buttons
to reset the unit.
b POWER
• Press to turn the unit on.
• In power-on mode, press and
hold to turn the unit off.
• In power-on mode, press to
turn the bottom light on/off.
c WI-FI SETUP button/indicator
• Connect the unit to a Wi-Fi network.
• Show the Wi-Fi connection
status of the unit.
d MP3-LINK
• Connect an external audio player
through the supplied MP3 link cable.
e USB
• Connect an iPod/iPhone/iPad through
an Apple USB cable (not supplied).
f DC IN
• Connect the power adaptor.
g Bottom light
Get started to use AirPlay
To get started with AirPlay, you need to:
1 Upgrade your iPod touch/iPhone/iPad to
the latest iOS version (iOS 4.3 or later).
• Or install the latest version of iTunes
(iTunes 10 or later) on your PC/Mac.
2 Connect power to AD7050W, then turn it
on (see 'Prepare' on page 7).
3 Connect AD7050W to your existing home
Wi-Fi network (see 'Connect to your
home Wi-Fi network for AirPlay' on page
8).
4 Make sure that your iPod touch/iPhone/
iPad or PC/Mac are also connected to the
same Wi-Fi network.
6EN
3 Prepare
Always follow the instructions in
this chapter in sequence.
Connect power
Caution
• Risk of product damage! Make sure that the power
supply voltage matches the voltage printed on the
bottom of the unit.
• Risk of electric shock! When you unplug the AC
adaptor, always pull the plug from the socket. Never
pull the cord.
• Before you connect the AC adaptor, make sure that you
have completed all the other connections.
» After boot-up, the Wi-Fi SETUP
indicator turns solid yellow.
• To turn the unit off, press and hold .
• To turn the unit on again, press and hold
once more.
Tip
• If the unit stays idle for more than 30 minutes, it turns
off automatically.
• In power-on mode, you can press to turn on or off
the LED light at the bottom of the unit.
• Connect the AC power cord to
• the DC IN socket on the back of the
unit.
• the wall power socket.
Turn AD7050W on
1 Press on the back to turn the unit on.
2 Wait for successful boot-up of the unit.
» The boot-up takes up to 25 seconds.
» During boot-up, the Wi-Fi SETUP
indicator on the back of the unit blinks
yellow.
7EN
Loading...
+ 21 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.