Philips AD7050W User Manual

Always there to help you

Question?

Contact

Philips

Register your product and get support at

www.philips.com/welcome

AD7050W

User manual

Contents

1 Important 2

Safety 2
Notice 3

2 Your Entertainment System 4

Introduction 4
What's in the box 4
What else you need 4
Overview of the main unit 5
Get started to use AirPlay 5

3 Prepare 6

Connect power 6
Turn AD7050W on 6

4 Connect to your home Wi-Fi

network for AirPlay 7

Method 1: Use iOS5 Wi-Fi network

login sharing 7
Method 2: Connect to a WPS router 8
Method 3: Connect to a non-WPS

Wi-Fi router 9

5 Play 16

Stream audio from your iTunes music

library to AD7050W 16
Use advanced sound settings 18
Play/charge your iPod/iPhone/iPad

through USB socket 18
Play from an external device 19

English

6 Updatermware 20

Download the update le 20
Update from the conguration page 20

7 Product information 22

Specications 22

8 Troubleshooting 23

EN

1

1 Important

Safety

Information for Europe:
Know these safety symbols

The 'exclamation mark' calls attention to
features for which you should carefully read the
supplied literature to prevent operating and
maintenance problems.

The 'lightening bolt' symbol indicates
uninsulated components within the product
that can cause an electric shock.

To reduce the risk of re or electric shock, do

not expose the product to rain or moisture and

do not place any objects lled with liquids, such
as vases, on the product.

a Read these instructions.
b Keep these instructions.
c Heed all warnings.
d Follow all instructions.
e Do not use this product near water.
f Clean only with dry cloth.
g Do not block any ventilation openings.

Install in accordance with the
manufacturer's instructions.

h Do not remove the casing of this product.
i Do not expose the product to dripping /

splashing water, rain or high humidity.

j Keep this product away from direct

sunlight,nakedamesorheat.

k Do not install near any heat sources

such as radiators, heat registers, stoves,
or other electrical equipment (including

ampliers).

l Do not place any other electrical

equipment on the product.

m Do not place any sources of danger

on the product (e.g. objects containing

liquids,burningcandles).

n Where the mains plug or an appliance

coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.

Warning

• Never remove the casing of this apparatus.

• Never lubricate any part of this apparatus.

• Never place this apparatus on other electrical

equipment.

• Keep this apparatus away from direct sunlight, naked

ames or heat.

• Ensure that you always have easy access to the power

cord, plug or adaptor to disconnect this apparatus from

the power.

Risk of overheating! Never install this apparatus

in a conned space. Always leave a space of

at least four inches around this apparatus for
ventilation. Ensure cur tains or other objects
never cover the ventilation slots on this
apparatus.

2 EN

Notice

This product complies with the radio

interference requirements of the European

Community.

This product complies with the requirement of

the 1999/5/EC directive.

Modications

Modications not authorized by the

manufacturer may void user's authority to
operate this product.

Your product is designed and manufactured

with high quality materials and components,

which can be recycled and reused.

When this crossed-out wheeled bin symbol is
attached to a product it means that the product
is covered by the European Directive 2002/96/
EC.

Please inform yourself about the local separate
collection system for electrical and electronic
products.

Please act according to your local rules and
do not dispose of your old products with your
normal household waste. Correct disposal of
your old product helps to prevent potential

negative consequences for the environment and

human health.

Environmental information

All unnecessary packaging has been omitted.
We have tried to make the packaging easy to

separate into three materials: cardboard (box),

polystyrene foam (buffer) and polyethylene

(bags, protective foam sheet.)

Your system consists of materials which can
be recycled and reused if disassembled by

a specialized company. Please observe the

local regulations regarding the disposal of

packaging materials, exhausted batteries and old
equipment.

“Made for iPod,” “Made for iPhone,” and “Made
for iPad” mean that an electronic accessory
has been designed to connect specically to
iPod, iPhone, or iPad, respectively, and has
been certied by the developer to meet

Apple performance standards. Apple is not
responsible for the operation of this device
or its compliance with safety and regulatory
standards. Please note that the use of this

accessory with iPod, iPhone, or iPad may affect

wireless performance.

AirPlay, iPod, and iPhone are trademarks of
Apple Inc., registered in the U.S. and other

countries. iPad is a trademark of Apple Inc.

Class II equipment symbol:

CLASS II apparatus with double insulation, and

no protective earth provided.

Note

• The type plate is located on the bottom of the

apparatus.

English

EN

3

2 Your

Entertainment
System

Congratulations on your purchase, and
welcome to Philips! To fully benet from the
support that Philips offers, register your product

at www.philips.com/welcome.

If you contact Philips, you will be asked for the

model and serial number of this apparatus. The
model number and serial number are on the
bottom of the apparatus. Write the numbers
here:

Model No. __________________________
Serial No. ___________________________

Introduction

With AD7050W, you can also:

• charge your iPod/iPhone/iPad through

the USB socket with an Apple USB
cable (not supplied).

• play your iTunes music library on your
iPod/iPhone/iPad through the USB
socket directly while charging.

• play music from other audio devices
through the MP3-LINK socket.

What's in the box

Check and identify the contents of your
package:

• Main unit (with a built-in Wi-Fi
module)

• 1 x AC power adapter

• User manual (in CD-ROM)

• Quick start guide

Apple AirPlay technology enables you to play

your iTunes music library, hosted on a Mac, PC,
iPhone, iPod touch, or iPad on any AirPlay­enabled device (for example, your AD7050W)

connected to the Wi-Fi network.

With an AirPlay-enabled device (for example,
your AD7050W), you can:

• stream audio from your iTunes music

library to any room in your house

• choose which AirPlay-enabled devices
you want to play music on (if you have
more than one such devices in your
house)

• stream audio to multiple AirPlay­enabled devices at the same time
(from the iTunes music library on your
PC/Mac only)

Tip

• Please visit www.philips.com/welcome for information

about more Philips AirPlay-enabled devices.

4 EN

What else you need

To stream audio wirelessly by AirPlay, you need:

• A Wi-Fi cer tied router

• A host for your iTunes music library,
for example, an iPod touch/iPhone/

iPad installed with iOS 4.3 (or later) or
a Wi-Fi enabled PC/Mac installed with
iTunes 10 (or later)

Your AD7050W should be connected to the
same local network as your iTunes host device
through the Wi-Fi router.

List of compatible iTunes host devices
for AirPlay

In terms of AirPlay, AD7050W is compatible

with:

• a Wi-Fi enabled PC/Mac installed with
iTunes 10 (or later); and

• the following iPod/iPhone/iPad models
installed with iOS 4.3 (or later):

• iPad 2

• iPad

• iPhone 4S

• iPhone 4

• iPhone 3GS

• iPod touch (3rd, and 4th generation)

Overview of the main unit

VOL

power

a VOL +/-

• Adjust volume.

• Press and hold both buttons to reset

the unit.

b POWER

• Press to turn the unit on.

• In power-on mode, press and hold to

turn the unit off.

• In power-on mode, press to turn the

bottom light on/off.

c WI-FI SETUP button/indicator

• Connect the unit to a Wi-Fi network.

• Show the Wi-Fi connection status of

the unit.

d MP3-LINK

• Connect an external audio player
through the supplied MP3 link cable.

e USB

• Connect an iPod/iPhone/iPad through
an Apple USB cable (not supplied).

f DC IN

• Connect the power adaptor.

g Bottom light

Get started to use AirPlay

To get started with AirPlay, you need to:

1 Upgrade your iPod touch/iPhone/iPad to

the latest iOS version (iOS 4.3 or later).

• Or install the latest version of iTunes
(iTunes 10 or later) on your PC/Mac.

2 Connect power to AD7050W, then turn it

on (see 'Prepare' on page 6).

3 Connect AD7050W to your existing home

Wi-Fi network (see 'Connect to your
home Wi-Fi network for AirPlay' on page

7).

4 Make sure that your iPod touch/iPhone/

iPad or PC/Mac are also connected to the
same Wi-Fi network.

English

EN

5

3 Prepare

Always follow the instructions in this chapter in

sequence.

Connect power

Caution

• Risk of product damage! Make sure that the power

supply voltage matches the voltage printed on the
bottom of the unit.

• Risk of electric shock! When you unplug the AC

adaptor, always pull the plug from the socket. Never

pull the cord.

• Before you connect the AC adaptor, make sure that you

have completed all the other connections.

» After boot-up, the Wi-Fi SETUP

indicator turns solid yellow.

• To turn the unit off, press and hold .

• To turn the unit on again, press and hold

once more.

Tip

• In power-on mode, you can press to turn on or off

the LED light at the bottom of the unit.

• Connect the AC power cord to

• the DC IN socket on the back of the

unit.

• the wall power socket.

Turn AD7050W on

1 Press on the back to turn the unit on.
2 Wait for successful boot-up of the unit.

» The boot-up takes up to 25 seconds.
» During boot-up, the Wi-Fi SETUP

indicator on the back of the unit blinks
yellow.

6 EN

4 Connect to

your home Wi­Fi network for
AirPlay

To connect AD7050W to your existing home

Wi-Fi network, you need to apply your home

Wi-Fi settings to AD7050W.
Choose your best setup method based on the

preconditions listed below.

Before connection of AD7050W to you home

Wi-Fi network, make sure that:

a your Wi-Fi router is powered on and

working properly.

b AD7050W has been powered on

and booted up successfully (see 'Turn
AD7050W on' on page 6).

Once connected successfully, AD7050W will

remember your home Wi-Fi settings. Then
you can enjoy AirPlay whenever AD7050W is
powered on and connected to your home Wi­Fi network automatically.

Method 1: Use iOS5 Wi-Fi network login sharing

1 Connect your iPod touch/iPhone/iPad to

your home Wi-Fi network.

2 Connect an Apple USB cable (not

supplied) to:

• the USB socket on the back of
AD7050W.

• the dock connector on your iPod/
iPhone/iPad.

English

Precondition Setup method
You have an iPod

touch/iPhone/iPad
upgraded to iOS 5.0
or later.

Your Wi-Fi router is
enabled with WPS
(Wi-Fi Protected
Setup) and supports
PBC (Push Button
Connection).

You have a Wi-Fi
enabled device with

an Internet browser,

such as an iPod touch/
iPhone/iPad or a Wi-Fi
enabled PC/Mac.

Choose method 1
(recommended) (see
'Method 1: Use iOS5
Wi-Fi network login
sharing' on page 7).

Choose method
2 (see 'Method 2:
Connect to a WPS
router' on page 8).

Choose method
3 (see 'Method 3:
Connect to a non­WPS Wi-Fi router' on
page 9).

EN

7