Philips ACT211-01 User Manual

PSA 128 MAX, PSA 256 MAX & PSA 256 MAX Jordan Firmware upgrade
procedure

For Windows users

1. Download the zip file from the site. Then unzip the file into a temp folder on your
computer.

2. At Start->Programs->Nike->psa128max or psa256max or psa256maxJordan, select
and launch “Upgrader”.

3. When the user starts the Upgrader with no device connected, the following screen
is seen with the

Start

button disabled.

Start

• The

• Click on the”…” button to browse and select the unzipped firmware file to be

loaded into the device and then click open

button is enabled only when the correct device is connected

o For psa128max, please select the file psa128max_ACT211_Western.ebn

or psa128max_ACT211_Asian.ebn(With Asian fonts)

o For psa256max, please select the file psa256max_ACT215_Western.ebn

or psa256max_ACT215_Asian.ebn(With Asian fonts)

o For psa256max Jordan, please select the file

psa256maxJordan_ACT216.ebn.

- Place a fresh battery to the set and connected to the PC

• The user is informed that the device will be upgraded with the new firmware.

On pressing OK, the firmware is loaded.

• Disconnect the device so that the device upgrades to the new firmware

-Press the play key and the LCD display shows :” FUpgrade”

-Wait until the set switch off automatically.

-The set is then upgraded .

For Mac users

1. Download the sit file from the site. Then unzip the file into a temp folder on your

computer.

2. Go to Applications folder on your MAC Machine and double click Upgrader or

Formatter.

Fig (1)

3. In steps below, ASSUMPTION made is that you have Formatter and Upgrader

already installed on your MAC.

If NOT, you need to install the same please the steps below: