Philips ACT-200, ACT-210 Service manual

Technical specification ....................................................1 - 1

Features ..........................................................................1 - 1

Accessories .....................................................................1 - 2

Instruction For Use ................................................1 - 2 ..1 - 8

Safety & Warnings...........................................................2 - 1

Handling chip components ..............................................2 - 2

Disassembly diagram ............................................2 - 3...2 - 4

Service Test Program............................................3 - 1...3 - 2

Set block diagram..................................................3 - 3...3 - 4

Pin description of ICs ............................................3 - 5...3 - 6

Start-up procedure.............................................................3-5

ACT200 MAIN BOARD

Circuit diagram ............................................................4 - 1

Layout diagram - component side ...............................4 - 2

Layout diagram - SMD side .........................................4 - 3

ACT210 MAIN BOARD

Circuit diagram ............................................................4 - 4

Layout diagram - component side ...............................4 - 5

Layout diagram - SMD side .........................................4 - 6

USB BOARD

Circuit diagram ............................................................4 - 7

Layout diagram............................................................4 - 8

Exploded view .................................................................5 - 1

Mechanical partslist .........................................................6 - 1

Electrical partslist ..................................................6 - 2...6 - 6

Published by SL 0238 Service Audio Printed in The Netherlands Subject to modification



Digital Audio Player

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise without the prior permission of Philips.

ACT200 ACT210

all versions

psa[64 / psa[128 max

1 - 1

TECHNICAL SPECIFICATION

General

Dimensions (WxHxD) : 60 x 68 x 27 mm

Weight without battery : 45 g

Output power : 2 x 5 mW

Power supply modes

Battery lifetime

Battery level detection

Current consumption

Charge section (not on all versions)

Charge current : 250mA ± 10%

Max. charge time for AY3363 : 4.0h

Temperature protection : 50ºC ± 5ºC

Headphone out (measured with 16Ω load, in EQ flat mode)

Output power : 4.25mW

Frequency response : 40Hz-16kHz 0(30Hz-

18kHz typ.)

S/N ratio (unwght) : ≥75dB (80dB typ.)

S/N ratio (A-wght) : ≥80dB

THD+N (1kHz, 0dB) : ≤0.3% (0.15% typ.)

Channel separation (1kHz) : ≤50dB (55dB typ.)

Channel unbalance (-40dB) : ≤1.5dB (0.2dB typ.)

* With 20kHz low pass filter, adjust volume to 1mW

Stand-by mode

Play mode

0mA typ.

70mA typ.

37mA typ.

Playing 1kHz 0dB MP3 file, volume setting = 1mW power output

Pause mode

61mA typ.Download mode

CONDITION

Connect USB cable between PC and the PBAS.

TYP.

LEVELNOITCETED

ettabyramiPr

Rechargable battery

LOW BAT! /ACT210

1.0V

± 50mV

1.0V

± 50mV



beep and red light /ACT200

1.0V

± 50mV

1.0V

± 50mV

EDOM



MP3

≥ 10 h



Voltage range

1.5V

Rechargable batteries

LR03/AAA/UM4x1

1.5V

SUPPLY MODE

seirettabAlkaline

LR03/AAA/UM4x1

EDOMNOITAREPO

EPYTYRETTAB

eryttabAlkaline

LR03/AAA/UM4x1

1 - 2

ACT210----controls

front view

rear view

supplied accessories

one usb cable

one psa software & user guide

cd-rom

one set of clip magnets

one AAA rechargeable Ni-MH

battery* (for ACT210)

one Ni-MH battery charger* (for ACT210)

* not supplied with Asia-Pacific

versions

one set of headphones, HJ020

one remote control, AY3776

one armband, AY3285

one AAA alkaline battery (for ACT200)

ACT200----controls

front vi ew

rear view

1 2;

switches the set on /off;

starts / pauses playback

2 5 / 6

skips to the beginning of a previous /

next track

3 - / +

adjusts the volume

4 display (for ACT210)

with backlight. lights up briefly

orange when you press any button

the psa.

5 eq

enhance your listening experience.

select from 4 equalizer settings:

Hiphop, Funk, Rock, Techno or create

your own adjustable Custom setting.

3.5 mm line out to connect

7 locks buttons to prevent them

from being activated

8 bat t er y com par tm ent

uses 1 x AAA alkaline or

Ni-MH

battery

9 usb in

(found in the battery compart-

connect the supplied usb cable

from

here to the

usb port of

your computer

controls and connections

the model & serial numbers are located inside the battery compartment.

(for ACT210)

ment)

4 indicator (for ACT200)

lights up: red (battery low / power

down), green (power up) or orange

(button lock activated / pause mode)

INSTRUCTION FOR UES

ACCESSORIES

1 - 3

Windows system requirements

you need to have a usb port. computers that were upgraded from Win 95 to Win 98

may not have usb compatibility! check out the other requirements:

– Pentium® MMX 166MHz processor or better

– usb port with Windows 98 / Me / 2000 / XP

– 64MB(for ACT200), 96MB(for ACT210) ram

– 50MB ram drive space

– cd rom drive

– video display card

– sound card

– Microsoft Internet Explorer 5.0 or better , Netscape 4.0 or better, and internet

access

Mac system requirements

– G3 or better

– MacOS 8.6-9.X

minium computer system requirements

INSTRUCTION FOR USE

psa[64 and psa[128 is a solid-state, portable, digital audio player:

– plays mp3 & windows media audio files e.g. digitized and compressed cd tracks,

tape tracks, audio books, newspapers, sound effects, etc., that are encoded into

mp3 & windows media audio format.

– software upgradeable and will support future playback formats and sofware exten-

sions that will be made available on www.nike-philips.com.

– will support for future digital rights management technology, including the Secure

Digital Music Initiative (SDMI).

take care when using headphones

hearing safety:listen at a moderate volume. using headphones at high volume can

impair your hearing.

traffic safety: do not use headphones while driving or cycling as you may cause an

accident.

general maintenance

to avoid damage or malfunction:

– do not expose to excessive heat caused by heating equipment or direct sunlight.

– do not drop the psa or allow objects to fall on the psa.

– do not allow the psa to be submersed in water. do not expose earphone socket or

battery compartment to water as water entering the set may cause major damage.

– do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasi-

ves as these may harm the set.

– active mobile phones in the vicinity may cause interference.

general information

battery

press 4 to open the battery cover latch and insert

one AAA battery preferably alkaline, or Ni-MH as

indicated.

insert the lower edge of door as shown to close

the

battery cover latch.

IMPORTANT!

– remove the battery if: battery drained or the

psa

will not be used for more than two weeks.

– batteries contain chemical substances, so they

should be disposed of properly .

indication of empty battery (for ACT210)

the number of blocks inside the battery icon

indicates the battery power remaining. when the

battery is low, the battery icon flashes. if no action

is taken to renew the battery, the display shows

BAT LOW! 5 seconds later the psa automatically

switches off.

power supply

(for ACT200)

beep beep! indication of empty battery

when the power level

is almost empty, the psa64

will

beep at intervals and the inidicator lights up

red. the psa will eventually switch

itself off.

always replace the battery after the first battery

warning beep is heard.

battery charger* (for ACT210)

1 open the battery compartment. insert the batteries

as indicated.

2 plug charger to wall outlet. the battery charger

indicator lights up red when charging. a green light

indicates charging has finished. maximum charging

time: approx. 4 hours.

note: always disconnect the battery charger from

the power outlet if you do not need to use it. batte-

ries cannot be charged onboard the

psa[128 max.

* not supplied with Asia-Pacific versions

power supply

1 - 4

power on and playback, 2;

press and hold 2; for 2 seconds to turn on.

playback starts automatically and display shows

track details.

*No file* will be shown if no content has been

stored in the psa.

power off, 2;

during playback, press and hold 2; for 2 seconds to turn off.

display message: OFF before turning off.

pause, 2;

during playback, press 2; to pause. press 2; again

to resume playback.

display: during pause mode, the elapsed

playtime flashes and track details freeze.

power -saving standby mode

the psa automatically switches off when playback

is paused longer than 30 seconds

and no buttons

are pressed.

power on / off, playback 2;

– indicator: green light flashes briefly and play-

back starts automatically.

– psa beeps: if no content has been stored in

the psa, the psa powers down.

for ACT200

for ACT210

– indicator: lights up red briefly

for ACT200

for ACT210

–

indicator: if psa on pause, orange light flashes.

for ACT200

for ACT210

INSTRUCTION FOR USE

volume

press - / + to decrease / increase the volume.

for ACT210

the volume bar decreases / increases.

eq sound options -

bring out the bass or top up

on treble!

press eq again and again to select your equalizer

option for high bass, flat, all high notes, etc.

display: Hiphop, Funk, Rock, Techno, Off or

Custom

create your own sound: Custom

if you have selected Custom, the next display

shows

4 eq frequency bars.

use 5 / 6 to select the frequency bar you want to

adjust.

use - /+ to

adjust the frequency level.

press eq again to confirm your desired setting.

display: returns to showing track details

adjusting volume - / + and eq settings

for ACT210

(for ACT210)

selecting a different track 5 , 6

press 5 / 6 to select the desired track.

fast searching within a track

during playback, press and hold 5 / 6 briefly.

psa plays track at high speed until the button is

released.

using the button lock

deactivates the other buttons so they are not

activated accidentally.

to activate / deactivate the button lock, press and

hold 2 seconds.

display: appears if button lock active.

indicator: lights up orange if button lock active,

and when you attempt to press any other but-

tons.

indicator: lights up green briefly if button lock

deactivated.

for ACT200

remote control

the remote has 5 buttons ( - / +, 2; ,5 / 6) that

function the same way that they do on the psa.

even if the button lock is activated the remote

control will override.

connect the remote control and headphones as

shown.

adjust the volume on both the psa and remote con

trol.

accessories

* No file *

1 - 5

clip magnets

wear your remote control and secure your headphone

cord with these wearable magnets.

insert the big button magnet underneath your

garment.

ment. clip the remote control on top.

magnet clip.

WARNING:

KEEP OUT OF REACH OF SMALL CHIL-

DREN TO AVOID CHOKING HAZARD.

KEEP THE MAGNETS AWAY FROM CREDIT

CARDS, TAPES AND ANY ITEMS WHICH

MAYBE SENSITIVE TO THE MAGNETS.

accessories

INSTRUCTION FOR USE

armband

wear your digital audio player during sport activity

by securing it to the supplied armband.

1 fit the psa into the rubber buckle, with the head-

phone / remote socket aligned to the socket hole.

2 position the armband around your arm. thread the

strap and fasten up for a snug fit.

installing MUSICMATCH Jukebox

install MUSICMATCH Jukebox software to manage your music collection on your

personal computer. MUSICMATCH Jukebox allows you to:

– convert cd music

tracks to mp3 and windows media audio files

– create & save music playlists

– download mp3 and windows media audio files to the psa

1 insert the psa cd rom into your cd rom drive.

note: for MAC users, click the MUSICMATCH icon double click on MUSICMATCH

Installer.

accessories, software: MUSICMATCH Jukebox

2 an introduction screen appears. select the language that suits you best ( english,

français, italiano, deutsch or español).

3 select your product.

software: MUSICMATCH Jukebox

software: MUSICMATCH Jukebox and device drivers

an introduction screen appears. select the language that suits you best (english,

français, italiano, deutsch or español).

3 select your product.

1 - 6

4 from the next screen, click install MUSICMATCH jukebox and follow the screen

instructions to install.

5 click Yes on the screen to restart your computer when prompted. the software is

now installed.

software: MUSICMATCH Jukebox and device drivers

INSTRUCTION FOR USE

installing the psa drivers

you must install the device drivers for your computer to recognize the psa player.

follow these directions to install the drivers.

1 insert the psa cd rom into your cd rom drive.

note: for MAC users, click the MUSICMATCH icon double click on MUSICMATCH Installer.

2 an introduction screen appears. select the language that suits you best (english,

français, italiano, deutsch orespañol).

3 click install drivers Next and follow all the screen instructions to complete

installation.

installing the psa drivers

connecting the psa to your computer

check that the psa is loaded with a suitable battery

(preferably fresh) before you start connecting.

usb port.

the other end of the usb cable to usb in, (found

inside the battery compartment.)

psa display: appears.

buttons on the psa are automatically locked during usb connection.

connecting the psa

indicator: lights up green continuously.

buttons on the psa are automatically locked

during usb connection.

for ACT200:

for ACT210:

convert music cds into mp3 files

1click the (record) button. the Recorder window will open.

2insert a commercial music cd into your computer's cd tray. CD lookup will attempt to

add artist track and album names. if information doesn't appear , enter it manually.

3check the boxes next to each track to record then click the (record) button on

the Recorder.

note: by default, the recorder will create mp3 files at 128 kbps, which is

considered cd quality (for other options, see the Options / Settings / Recorder menus.). recorded tracks will be automatically added to your Music Library.

encoding at 96 kbps can increase playtime with minimal loss in audio quality

creating mp3 files

1 - 7

create & save music playlists

1 open the Music Library by clicking the My Library button.

2 double-click a track in the library, or drag and drop tracks from the Music Library

into the Playlist window.

3 drag and drop tracks within the Playlist to change the play order.

4 click Save to save the playlist.

playlist

download music* to your player from your computer:

1 create or open a music playlist.

2 clickFile Send to Device Download To Nike psa[64, psa[128 max. your songs

will automatically appear in the Files to Download window.

3 select the songs you want to transfer and then click Download.

4 after tracks have been transferred to the psa, click Done to exit. view download

status from the track progress bar.

note: during file transfer, psa display shows scrolling.

* the current psa may not download windows media audio for mac users. check out www.nike-philips.com for updates of mac plug-in.

downloading music

tips:

– the Portable Device Memory window (right) shows the tracks currently stored on

the psa (if any). to clear tracks from psa memory, click Reformat Start

Close.

– to fit more songs onto your player with existing memory, use the Resample Rate

option (upper left), which allows you to reformat the tracks downloaded to a

lesser bit rate. this lets you fit more audio onto your player by creating smaller

files during the download. this does not affect the files stored on your computer.

downloading music

updating MUSICMATCH software

be sure you have the latest available version of MUSICMATCH Jukebox by updating

your software.

Jukebox for you.

requires an active internet connection.

upgrading your audio player

visit http://www .nike-philips.com for more information and firmware upgrades.

updating software, upgrading your audio player

INSTRUCTION FOR USE

1 - 8

helpful tips

problem solution

usb does not – you are using an unsuitable usb cable. connect/function use the supplied usb cable only.

– cable connections incorrect / loose. check that all connections are correct and well inserted on the psa player and your computer. – usb driver not installed. check that you have installed the usb driver plug-in provided from the psa installation cd rom. – wrong W indows / MacOS version. your computer must be equipped with Windows 98 / Me / 2000 & XP or MacOS 8.6-9.x. – usb not enabled. check the BIOS set-up: usb has to be enabled.

unable to download – battery low and/or connection between the files to player player and computer is loose.

check battery status and usb cable connection. – drivers not installed. check you have installed the drivers provided from the psa installation cd rom. – current psa

does not download windows

media audio for mac users. check out www.nike-philips.com for updates. – electrostatic discharge. remove battery and replace after several seconds.

incomplete track

download

– usb connection

broken during downloading

check the usb connection, delete the file on the psa via musicmatch and download track again.

helpful tips

INSTRUCTION FOR USE

helpful tips

if a fault occurs, first check the points listed below before taking the set for repair.

if you are unable to remedy a problem by following these hints, consult your dealer

or service center .

warning

circumstances should you try to repair the set yourself, as this will invalidate the warranty.

problem solution

no sound

no reaction to controls / malfunction deactivate .

sound skips during playback –mp3 file made at compression level exceeding on the psa 320kbps.

: do not open the set as there is a risk of electric shock! under no

–

battery weak / incorrectly inserted.

correctly insert fresh battery.

–

psa buttons pressed too quickly.

slow down. press firmly. indicator lights up.

–

headphones not properly connected.

insert headphone plug into jack completely.

–

activated

–

electrostatic discharge.

remove battery and replace

–

use a lower compression

into mp3 format

–

electrical interference from other appliances, e.g. mobile phones, fluorescent, electric pylons. move away

from source of electrical interference.

after several seconds.

level to record your file

lamps,

2 - 1

All ICs and many other semiconductors are susceptible to electrostatic discharges (ESD). Careless handling during repair can reduce life drastically. When repairing, make sure that you are connected with the same potential as the mass of the set via a wristband with resistance. Keep components and tools at this potential.

f ATTENTION

Tous les IC et beaucoup d´autres semi-conducteurs sont sensibles aux décharges statiques (ESD). Leur longévite pourrait être considérablement écourtée par le fait qu´aucune précaution nést prise à leur manipulation. Lors de réparations, s´assurer de bien être relié au même potentiel que la masse de l´appareil et enfileer le bracelet serti d´une résistance de sécurité. Veiller à ce que les composants ainsi que les outils que l´on utilise soient également à ce potentiel.

d WARNUNG

Alle ICs und viele andere Halbleiter sind empfindlich gegenüber elektrostatischen Entladungen (ESD). Unsorgfältige Behandlung im Reparaturfall kann die Lebensdauer drastisch reduzieren. Sorgen Sie dafür, daß Sie im Reparaturfall über ein Pulsarmband mit Widerstand mit dem Massepotential des Gerätes verbunden sind. Halten Sie Bauteile und Hilfsmittel ebenfalls auf diesem Potential.

ñ WAARSCHUWING

Alle IC´s en vele andere halfgeleiders zijn gevoelig voor electrostatische ontladingen (ESD). Onzorgvuldig behandelen tijdens reparatie kan de levensduur drastisch doen vermindern. Zorg ervoor dat u tijdens reparatie via een polsband met weerstand verbonden bent met hetzelfde potentiaal als de massa van het apparaat. Houd componenten en hulpmiddelen ook op ditzelfde potentiaal.

i AVVERTIMENTO

Tutti IC e parecchi semi-conduttori sono sensibili alle scariche statiche (ESD). La loro longevità potrebbe essere fortemente ridatta in caso di non osservazione della più grande cauzione alla loro manipolazione. Durante le riparationi occorre quindi essere collegato allo stesso potenziale che quello della massa delápparecchio tramite un braccialetto a resistenza. Assicurarsi che i componenti e anche gli utensili con quali si lavora siano anche a questo potenziale.

Safety regulations require that the set be restored to its original condition and that parts which are identical with those specified be used. Safety components are marked by the symbol

Le norme di sicurezza estigono che l´apparecchio venga rimesso nelle condizioni originali e che siano utilizzati i pezzi di ricambiago identici a quelli specificati. Componenty di sicurezza sono marcati con

Veiligheidsbepalingen vereisen, dat het apparaat in zijn oorspronkeliijke toestand wordt teruggebracht en dat onderdelen, identiek aan de gespecificeerde, worden toegepast. De Veiligheidsonderdelen zijn aangeduid met het symbool

"Pour votre sécurite, ces documents doivent être utilisés par des spécialistes agréés, seuls habilités à réparer votre appareil en panne".

ESD

SAFETY

Bei jeder Reparatur sind die geltenden Sicherheitsvorschriften zu beachten. Der Originalzustand des Gerätes darf nicht verändert werden. Für Reparaturen sind Originalersatzteile zu verwenden. Sicherheitsbauteile sind durch das Symbol markiert.

Les normes de sécurité exigent que l`appareil soit remis à l`état d`origine et que soient utilisées les pièces de rechange identiques à celles spécifiées. Les composants de sécurité sont marqués

After servicing and before returning the set to customer perform a leakage current measurement test from all exposed metal parts to earth ground, to assure no shock hazard exists. The leakage current must not exceed 0.5mA.

AVAILABLE ESD PROTECTION EQUIPMENT :

anti-static table mat large 1200x650x1.25mm 4822 466 10953

small 600x650x1.25mm 4822 466 10958

anti-static wristband 4822 395 10223 connection box (3 press stud connections, 1MΩ) 4822 320 11307 extendible cable (2m, 2MΩ, to connect wristband to connection box) 4822 320 11305 connecting cable (3m, 2MΩ, to connect table mat to connection box) 4822 320 11306 earth cable (1MΩ, to connect any product to mat or to connection box) 4822 320 11308 KIT ESD3 (combining all 6 prior products - small table mat) 4822 310 10671 wristband tester 4822 344 13999

SAFETY & WARNINGS

2 - 2

ESD PROTECTION EQUIPMENT

Anti-static table mat large 1200x650x1.25mm 4822 466 10953

small 600x650x1.25mm 4822 466 10958

Anti-static wristband 4822 395 10223 Connection box (3press stud connections,1MΩ) 4822 320 11307 Extendible cable (2m,2MΩ ,to connect wristband to connection box) 4822 320 11305 Connecting cable (3m,2MΩ ,to connect table mat to connection box) 4822 320 11306 Earth cable (1MΩ , to connect any product to mat or to connection box) 4822 320 11308 KIT ESD3(combining all 6 prior products - small table mat) 4822 310 10671 Wristband tester 4822 344 13999

HANDLING CHIP COMPONENTS

+ 23 hidden pages

Philips ACT-200, ACT-210 Service manual

TABLE OF CONTENTS

psa[64 / psa[128 max

TECHNICAL SPECIFICATION

INSTRUCTION FOR UES

ACCESSORIES

INSTRUCTION FOR USE

SAFETY & WARNINGS

HANDLING CHIP COMPONENTS