Philips AC0819, AC0820, AC0830 User Manual

AC0819/AC0820 AC0830

User manual

ZH-HK

用戶手冊

Contents

1 Important �� 2

Safety �� 2

2 Your air purier ��4

Product Overview ��4 Controls overview ��5

3 Using the air purier �� 5

Understanding the air quality light ��5 Installing the lter ��6 Connecting power ��6 Turning on and o ��6 Changing the mode setting �� 7

4 Cleaning �� 7

Cleaning schedule �� 7 Cleaning the body of the air purier �� 8 Cleaning the air quality sensor ��8 Cleaning the surface of the lter ��8

5 Replacing the lter ��9

Understanding the healthy air protect lock ��9 Replacing the lter ��9 Filter reset �� 10

6 Storage �� 10

7 Troubleshooting �� 10

8 Guarantee and service ��12

Order parts or accessories ��12

9 Notices ��12

Electromagnetic elds (EMF) ��12 Recycling ��12

1EN

1 Important

Safety

Read this user manual carefully before you use the appliance, and save it for future reference�

Danger

• Do not clean the appliance with water, any other liquid, or a

(ammable) detergent to avoid electric shock and/or a re hazard�

• Do not spray any ammable materials such as insecticides or fragrance

around the appliance�

Warning

• Check if the voltage indicated on the appliance corresponds to the local

power voltage before you connect the appliance�

• If the power cord is damaged, you must have it replaced by Philips, a

service center authorized by Philips, or similarly qualied persons in order to avoid a hazard�

• Do not use the appliance if the adaptor, the power cord, or the

appliance itself is damaged�

• Only use the approved 3-pin plug adapter (KA1801A-2400750BS)

provided with the appliance�

• This appliance is not intended for use by persons (including children)

with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety�

• Children shall not play with the appliance� Cleaning and maintenance

shall not be made by children without supervision�

• Do not block the air inlet and outlet�

• Do not place any items on top of the air outlet, or in front of the air

inlet�

• Make sure that foreign objects do not fall into the appliance through

the air outlet�

2 EN

Caution

• This appliance is not a substitute for proper ventilation, regular vacuum

cleaning, or use of an extractor hood or fan while cooking�

• Always place and use the appliance on a dry, stable, level, and

horizontal surface�

• Leave at least 20cm free space around the appliance and leave at least

30cm free space above the appliance�

• Do not sit or stand on the appliance� Do not place anything on top of

the appliance�

• Do not place the appliance directly below an air conditioner to prevent

condensation from dripping onto the appliance�

• Only use the original Philips lters specially intended for this appliance�

Do not use any other lters�

• Combustion of the lter may cause irreversible human hazard and/

or jeopardize other lives� Do not use the lter as fuel or for similar purpose�

• Avoid knocking against the appliance (the air inlet and outlet in

particular) with hard objects�

• Do not insert your ngers or objects into the air outlet or the air inlet to

prevent physical injury or malfunctioning of the appliance�

• Do not use this appliance when you have used indoor smoke-type

insect repellents or in places with oily residues, burning incense, or chemical fumes�

• Do not use the appliance near gas appliances, heating devices or

replaces�

• Always turn o the air purier rst, then unplug adapter from wall

outlet, when you want to moving, cleaning appliance, replacing the lters or carry out other maintenance�

• The appliance is only intended for household use under normal

operating conditions�

• Do not use the appliance in wet surroundings or in surroundings with

high ambient temperatures, such as the bathroom, toilet, or kitchen, or in a room with major temperature changes�

• The appliance does not remove carbon monoxide (CO) or radon

(Rn)� It cannot be used as a safety device in case of accidents with combeustion processes and hazardous chemicals�

3EN

2 Your air purifier

Air quality sensor

Congratulations on your purchase, and welcome to Philips! To fully benet from the support that Philips oers, register your product at

www�philips�com/welcome�

Product Overview

Control panel

NanoProtect lter Series 2 (FY0194, FY0293*)

Base

*FY0194 is for AC0819/AC0820, FY0293 is for AC0830� **Please use only the 3 pin plug adapter provided�

Air outlet

Power on/o button

Power socket

3 Pin plug adapter** (KA1801A-2400750BS)

4 EN

Controls overview

3 Using the air purifier

Understanding the air quality light

Air quality light

Mode switch/ Filter reset button

Filter replacement alert

The color of air quality light corresponds to the ambient air quality� The brightness of air quality light reects the current running mode�

PM2�5 level Air quality light color Air quality level

≤12 Blue Good

13-35 Blue-purple Fair

36-55 Purple-red Poor

>55 Red Very poor

5EN

Installing the lter

Remove all packaging of the lter before use�

Note: Make sure the air purier is unplugged from the electrical outlet before installing the

lter�

CLOSEOPEN

1 2 3 4 5

CLOSEOPEN

1 Rotate the base anti-clockwise to remove it from the appliance� 2 Pull the lter out from the appliance� 3 Remove all packaging materials of the air purication lter� 4 Put the lter back into the appliance� 5 Reattach the base and rotate it clockwise to fasten the base�

Connecting power

Note: Risk of electric shock! When you unplug the AC power cord,

always pull the plug from the socket� Never pull the cord�

Connect the power adapter to:

• First, the power socket on the appliance�

• Then, the wall outlet�

Turning on and o

Note:

• For optimum purication performance, close doors and windows�

1 Press the power button on the back of the air purier to switch on�

» The air purier operates in the auto mode by default�

2 Press the power button again to switch o the air purier�

6 EN

Changing the mode setting

You can choose Auto mode, Turbo mode or the Sleep mode by pressing the mode switch button � The brightness of air quality light reects the current running mode:

• Sleep mode-lowest brightness

• Auto mode-mid level brightness

• Turbo mode-highest level brightness

Auto mode

In Auto mode, the appliance selects the fan speed in accordance with the ambient air quality�

Turbo mode

In Turbo mode, the air purier operates on the highest speed�

Sleep mode

In Sleep mode, the air purier operates quietly at a low speed�

4 Cleaning

Note:

• Never use abrasive, aggressive, or ammable cleaning agents such as bleach or alcohol to clean any part of the appliance�

Cleaning schedule

Frequency Cleaning method

Wipe the surface of the appliance with a soft dry cloth

When necessary

Clean the air outlet cover

Every two months Clean the air quality sensor with a dry cotton swab

Every four weeks Clean the surface of the lter

7EN

+ 19 hidden pages