Philips 9P6034C, 9P5534C, 9P5531C, 9P5034C User Manual

Instructions for use 9P5031C1 9P5531C1 9P6031C1 9P5034C1 9P5534C1 9P6034C1

Projection

Television

Once your PHILIPS MAGNAVOX purchase is registered, you’re eligible to receive all the privileges of

owning a PHILIPS MAGNAVOX product. So complete and return the Warranty Registration Card

enclosed with your purchase at once. And take advantage of these important benefits.

Return your Warranty Registration card today to ensure you receive

all the benefits you’re entitled to.

Congratulations

on your

purchase,

and welcome to the

“family!”

Dear PHILIPS MAGNAVOX product owner:

Thank you for your confidence in PHILIPS MAGNAVOX. You’ve selected one of the best-built, bestbacked products available today. And we’ll do everything in our power to keep you happy with your purchase for many years to come.

As a member of the PHILIPS MAGNAVOX “family,” you’re entitled to protection by one of the most comprehensive warranties and outstanding service networks in the industry.

What’s more, your purchase guarantees you’ll receive all the information and special of fers for which you qualify, plus easy access to accessories from our convenient home shopping network.

And most importantly you can count on our uncompromising commitment to your total satisfaction. All of this is our way of saying welcome–and thanks for investing in a PHILIPS MAGNAVOX product.

Sincerely ,

Robert Minkhorst President and Chief Executive Officer

Know these

safety

symbols

t This “bolt of lightning” indicates uninsulated material within your unit which may cause an

electrical shock. For the safety of everyone in your household, please do not remove the product covering.

s The “exclamation point” calls attention to features for which you should read the enclosed lit-

erature closely to prevent operating and maintenance problems. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT

TO RAIN OR MOISTURE. CAUTION: To prevent electric shock, match wide blade of plug to wide slot, and fully insert. ATTENTION: Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la

borne correspondante de la prise et pousser jusqu’au fond.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Warranty

Verification

Registering your product within 10 days confirms your right to maximum protection under the terms and conditions of your PHILIPS MAGNAVOX warranty.

Owner

Confirmation

Your completed Warranty Registration Card serves as verification of ownership in the event of product theft or loss.

Model

Registration

Returning your Warranty Registration Card right away guarantees you’ll receive all the information and special offers which you qualify for as the owner of your model.

P.S. Remember, to get the most from your PHILIPS

MAGNAVOX product, you must return your Warranty Registration Card within 10 days. So please mail it to us right now!

Hurry!

Visit our World Wide Web Site at http://www.philipsmagnavox.com

This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of.

1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated.

2. Retain Instructions - The safety and operating instructions should be retained for future reference.

3. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to.

4. Follow Instructions - All operating and use instructions should be followed.

5. Water and Moisture - The appliance should not be used near water

- for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement or near a swimming pool, etc.

6. Carts and Stands - The appliance should be used only with a cart or stand that is recommended by the manufacturer.

6A. An appliance and cart combination should be moved

with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

6B. Tilt/Stability - All televisions must comply with recommended inter-

national global safety standards for tilt and stability properties of its cabinet design.

• Do not compromise these design standards by applying exces-

sive pull force to the front, or top, of the cabinet which could ultimately overturn the product.

• Also, do not endanger yourself, or children, by placing elec-

tronic equipment/toys on the top of the cabinet. Such items could unsuspectingly fall from the top of the set and cause product damage and/or personal injury.

7. Wall or Ceiling Mounting - The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer.

8. Ventilation - The appliance should be situated so that its location or position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or, placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.

9. Heat - The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.

10. Power Sources - The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.

11. Power-Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords and plugs, convenience receptacles, and the point where they exit from the appliance.

12. Cleaning - The appliance should be cleaned only as recommended by the manufacturer.

13. Power Lines - An outdoor antenna should be located away from power lines.

14. Outdoor Antenna Grounding - If an outside antenna is connected to the receiver, be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges.

Section 810 of the National Electric Code, ANSI/NFPA No. 70-1984, provides information with respect to proper grounding of the mats and supporting structure grounding of the lead-in wire to an antenna discharge unit, size of grounding connectors, location of antenna-discharge unit, connection to grounding electrodes and requirements for the grounding electrode. See Fig. below.

15. Non-use Periods - The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time.

16. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.

17. Damage Requiring Service - The appliance should be serviced by qualified service personnel when:

A. The power supply cord or the plug has been damaged; or B. Objects have fallen, or liquid has been spilled into the appli-

ance; or

C. The appliance has been exposed to rain; or D. The appliance does not appear to operate normally or exhibits

a marked change in performance; or

E. The appliance has been dropped, or the enclosure damaged.

18. Servicing - The user should not attempt to service the appliance

beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel.

Note to the CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

SAFETY INSTRUCTIONS - Read before operating equipment

ANTENNA LEAD IN WIRE

ANTENNA DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS (NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)

GROUND CLAMP

ELECTRIC SERVICE EQUIPMENT

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE (NEC)

Example of Antenna Grounding as per NEC - National Electric Code

TABLE OF CONTENTS

Getting Started

Welcome/Product Registration...................2

Safety/Precautions .....................................................3

Table of Contents.......................................................4

Features and Model Information................................5

On-Screen Features

PICTURE MENU

✧Adjusting Color, Brightness, Sharpness,

Tint, and Picture Controls...................................6

✧Using the Clearview Control...............................7

✧Using the Flesh Correction Control ....................7

✧Adjusting the TV's Convergence Control...........8

FEATURES MENU

✧Selecting a Picture Source ..................................9

✧Setting the TV for Closed Captioning...............10

✧Setting the TV for Cable or Antenna Signals....11

✧Adding Channels in Memory (Automatically) .12

✧Adding Channels in Memory (Manually).........13

✧Setting the TV Clock.........................................14

✧Using the Time/Channel Reminder Control......14

✧Turn-On Timer..................................................15

✧Using the Sleep Timer Control .........................15

✧Using Parental Control/Content Advisory:

• Code Setup/Blocking Channels...............16-17

• Content Advisory - Movie Ratings .........18-19

• Parental Guidelines.......................................20

• Blocking Options/Review Settings...............21

✧Adjusting the Channel Display Control............22

✧Using the Language Control .............................22

SOUND MENU

✧Adjusting Bass, Treble, and Balance Sound

Controls.............................................................23

✧Setting the Bass Boost Control ........................23

✧Setting the TV for Stereo and SAP Programs ..24

✧Using the Sound Image Control........................25

✧Using the Volume Display Control...................25

✧Using the TV Speaker On/Off Control with

the Audio Output jacks .....................................26

✧Surround Sound Speaker Connections and

Variable Audio Output Control ........................27

✧Using the TV's Audio/Video Input and

Output Jacks ...............................................28-31

Remote Control Operation

Using the Smart Picture Control.................32

Using the Smart Sound Control...............................32

Using the Smart Surf Control and the Surf button...33 Setting the TV Remote to Work Optional Accessory

Devices:

• Direct Entry/Code Number Method ...............34-35

• Search and Identify Method ................................36

• Remote Control Direct Entry Code Lists .......37-38

Using the Remote's VCR buttons ............................39

Picture-In-Picture (PIP)

How to Use PIP (Connections) ............40-41

How to Use PIP with the TV Remote......................42

Selecting the Picture Source for PIP........................43

Adjusting Picture-in-Picture Color and Tint............44

More PIP Connections (Cable Converter)...............45

General Information

Tips if Something Isn’t Working...............46

TV Help Menu.........................................................47

Glossary of TV Terms .............................................48

Index ........................................................................49

Factory Service Locations..................................50-51

Warranty ..................................................................52

Use the simple Set-Up Guide (supplied with your TV information packet) for details on:

• Antenna Hook-ups

• First Time Set-Up

(Automatic Settings)

• Basic TV and Remote

Control Operation

• On-Screen Menu Use

SET-UP AND QUICK USE GUIDE

SET-U

P ANDQUICKUSEGUIDE

TABLEOF CONTENTS

Getting Started

Warning/Precautions..................................1

Hooking Up Your TV.................................................1

How to Use the First Time Set-Up ...........................2

Basic TV and Remote Control Operation.................3

How to Use the On-Screen Menu Controls...............4

2 1

2 3

4 5 6

• For details on product registration, warranty, and service refer to the other literature included with your

TV information packet. Please retain all these materials and keep them handy for future reference.

combination (outdoor

or indoor) antenna receives normal broadcast channels 2-13 (VHF) and 14-69 (UHF). Your connection to such an antenna is easy since there is only one antenna plug (75Ωohm) on the back of your TV - and that’s where the antenna goes.

ANTENNA

OUTDOOR/INDOOR

Remember, be sure to set the TV for the type signal you've connected (see "SETUP" on page 2 of this Guide.)

To order any optional accessory contact your dealer or call the toll-free accessory ordering number (1-800-851-

8885).

SMART HELP

If your antenna has a

round cableconnector(75

ohm) on the end,then you're ready to connect it to the TV.

If your antenna has flat twinlead wire (300 ohm),you first

need to attach the antenna wires to the screws on a 300 to 75 ohm adapter.

Push the round endof the

adapter (or antenna) onto the ANTENNA plug on the rear of the TV. If the round end of the antenna wire is threaded,screw it down tight.

STOP

300 to 75Ω Adapter

(483521827003)

Twin Lead Wire

Back of TV

BEGIN

Note:For homes with separate UHF and VHF antennas you will need an optional combiner to connect to the TV.

U/V Combiner

75-300 Ohm Adapter

Round Cable 75ΩOhm

Combination VHF/UHF Antenna

(Outdoor or Indoor)

Back of TV

Projection Television and Remote Control

WARNING:TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS UNIT TO

RAIN OR EXCESSIVE MOISTURE.

NOTE:This owner's manual is used with several different television models. Not all features (and drawings) discussed in this manual will necessarily match those found with your television set. This is normal and does not require you contacting your dealer or requesting service.

VOL

STATUS/EXIT

NOTE: This owner's manual is used with several different television models. Not all features (and drawings) discussed in this manual will necessarily match those found with your television set. This is normal and does not require you contacting your dealer or requesting service.

Because of continuous product improvements, the information mentioned in the documents accompanying your product are subject to change without notice.

UHF

300

Ω

REAR SURROUND SPEAKERS

–

S-VIDEO

FIXED

VIDEO

VIDEO OUT

VAR

AUDIO

AUX 1AUX 2

AUDIO OUT

INPUTS

ANT A/CABLE 75 V UHF/VHF

ER T

P A D A Ω

5-300 7

FIXED

VIDEO

VIDEO OUT

VAR

AUDIO

AUDIO OUT

AUX 1AUX 2

INPUTS

ANT A/CABLE 75 V UHF/VHF

REAR SURROUND SPEAKERS

–

S-VIDEO

FIXED

VIDEO

VIDEO OUT

VAR

AUDIO

L R

AUX 1AUX 2

AUDIO OUT

INPUTS

ANT A/CABLE 75 V UHF/VHF

First Time Set Up - automatically sets the TV for local channels and the correct picture signal (antenna or cable). See your Set-up and Quick Use Guide for details.

Infrared Remote Control - operates your TV set and a variety of wireless remote control VCRs, Cable TV Converters, and other accessory equipment.

Standard TV broadcast (VHF/UHF) or Cable TV (CATV) channel capability.

Closed Captioning - allows the viewer to read TV

program dialogue or voice conversations as on-screen text.

Automatic Programming of channels - for quick and easy selection of favorite stations available in your area.

Picture-In-Picture (PIP) - can show a TV program and the direct video output from an accessory (VCR, etc.) onto the TV screen at the same time.

Stereo TV - with a built-in audio amplifier and a twin speaker system, reception of TV programs in both broadcast stereo sound or (SAP) bilingual broadcast are available.

On-Screen Features - display helpful information for the setting of TV controls (such as help messages, operating tips and glossary).

Parental Controls - for “censoring” or blocking out channels to keep children from watching undesirable programming.

Audio/Video Jacks - for direct connections with VCRs (and other accessories) for quality TV picture and sound playback.Component video Input connectors are also available for high fidelity color and picture resolution when using digital video source material, such as DVD.

Surround Sound -this TV set contains external audio speaker connections for a more dynamic sound effect.

Sleep-Timer - automatically turns the TV OFF at preset time intervals.

Smart Button - for the control of TV Sound and Picture levels. Use the Smart Button on the remote to quickly adjust Smart Sound (to set TV Volume levels during program changes or commercial breaks); Smart Picture (for programmed video level adjustments on a variety of program sources); and Smart Surf (for quick one button channel selection of up to 10 of your favorite channels).

FEATURES

As you unpack your TV please note that the fol-

lowing items have been included with your set:

• Owner's Manual

- Safety Tip Information

- Factory Service Center Locations

• Warranty Registration Card

• Remote Control Transmitter

• Batteries for Remote Control Use Please take a few minutes to complete your regis-

tration card. The serial number for the TV is on the back of the set.

Refer to the back of this manual for instructions on the cleaning and care of the TV.

End-of-Life disposal

Your new projection television and its packaging contain materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount of reusable materials and minimize the amounts which need to be properly disposed.

Your product also uses batteries which should not be thrown away when depleted, but should be handed in and disposed of as small chemical waste.

Please find out about the local regulations on how to dispose of your old television, batteries, and packaging materials whenever you replace existing equipment.

Digital Ready - Projection Television capable of connecting to both the current analog television signals of today as well as interfacing with new upcoming digital source playback products and devices. This TV includes multiple signal connectors (Component Video, S-Video, Composite Video) which give you a variety of equipment playback options for digital set top boxes, satellite receivers, cable boxes, and other digital devices.

While there may exist some digital devices with connections not available on this television, you should be adequately prepared for the vast majority of products coming onto the digital consumer electronics’ market. Note: You should always use the connection output on digital devices that gives the highest level of picture quality possible. As listed above the Component Video (or Y PB PR) input delivers the best color and picture reproduction; followed by SVideo; and then Composite Video. In addition to the above listed inputs, your television also includes the standard 75ohm cable signal connector for use with antennas or analog cable boxes.

PICTURE MENU CONTROL ADJUSTMENTS

MAIN MENU

PICTURE

FEATURES

SOUND

HELP

EXIT

PICTURE MENU

SHARP

PICTURE

CLEARVIEW

EXIT

1 OF 2

COLOR TINT

MORE...

BRIGHT

HELP

EXIT

NEXT...

MIN

MAX

COLOR

STOP ■

REW

§§

©©

PLAY

REC ●

STATUS

VOL

ON/OFF

TV /VCR

VCR

ACC

SWAP

FREEZE

POS

SIZE

ENTER

CLEAR

SURF

MUTE

PAUSE II

SLEEP

SMART

100+

POWER

O D E

1ST TIME SETUP

COLOR, BRIGHTNESS,

SHARPNESS, TINT, PICTURE

STOP

o adjust your TV color and

picture controls, select a TV channel and follow the steps shown below:

Select BRIGHTNESS, PIC-

TURE, COLOR, TINT, or

SHARPNESS picture control.

With the PICTURE MENU on screen, move the RED highlight with the MENU buttons. Then

press the MENU (M) button.

Press the (+) or (-) buttons to

adjust the selected control.

Press the STATUS button to

clear the screen.

SMART HELP

Remember. When the bar

scale is centered, control settings are at normal mid-range levels.

BRIGHTNESS Press (-) or (+) until dark parts of the picture show good detail.

PICTURE Press (-) or (+) until whitest parts of the picture are as bright as you prefer.

COLOR Press (-) or (+) to add or eliminate color.

TINT Press (-) or (+) to obtain natural skin tones. (Also see Flesh Correction on page 7 for more information).

SHARPNESS Press (-) or (+) to improve detail in the picture.

BEGIN

Select and then press MENU (M) button to view an explanation of the selected feature.

Select and then press MENU (M) button to view additional controls grouped under same feature heading. For Example: Tint, Brightness, Picture, etc.

PICTURE MENU CONTROLS (CONTINUED)

MAIN MENU

PICTURE

FEATURES

SOUND

HELP

EXIT

SHARP

PICTURE

EXIT

1 OF 2

COLOR TINT

MORE...

BRIGHT

CLEARVIEW

PICTURE MENU

CLEARVIEW

EXIT

NEXT...

NORMAL

ENHANCED

HELP

STOP ■

REW

§§

©©

PLAY

REC ●

STATUS

VOL

ON/OFF

TV /VCR

VCR

ACC

SWAP

FREEZE

POS

SIZE

ENTER

CLEAR

SURF

MUTE

PAUSE II

SLEEP

SMART

100+

POWER

O D E

1ST TIME SETUP

learview is a sharpness feature

which smoothes out background snow (or picture noise) without losing picture image detail or crispness.

Select CLEARVIEW control.

With the PICTURE MENU on screen, move the RED highlight with the MENU buttons. Then

press the MENU (M) button.

Press the MENU ▲▼ buttons

to move the RED highlight. Press the MENU button to select (U) the ENHANCED mode.

Press the STATUS button to

clear the screen.

CLEARVIEW

STOP

BEGIN

MAIN MENU

PICTURE

FEATURES

SOUND

HELP

EXIT

PICTURE MENU

EXIT

2 OF 2

MORE...

PICTURE MENU

SHARP

PICTURE

CLEARVIEW

EXIT

1 OF 2

COLOR TINT

MORE...

BRIGHT

FLESH CORRECTION

CONVERGENCE

FLESH CORRECTION

HELP

EXIT

OFF

STOP ■

REW

§§

©©

PLAY

REC ●

STATUS

VOL

ON/OFF

TV /VCR

VCR

ACC

SWAP

FREEZE

POS

SIZE

ENTER

CLEAR

SURF

MUTE

PAUSE II

SLEEP

SMART

100+

POWER

O D E

1ST TIME SETUP

se the Flesh Correction con-

trol to keep skin tone hues (or facial tint) from varying from TV channel to TV channel.

Select FLESH CORREC-

TION control.

With PICTURE MENU (2 of 2) on screen, move the RED highlight with the MENU buttons. Then

press the MENU (M) button.

Press the MENU ▲▼ buttons

to move the RED highlight. Press the MENU button to turn (U) the FLESH CORRECTION control ON.

Press the STATUS button to

clear the screen.

FLESH CORRECTION

STOP

BEGIN

PICTURE MENU CONTROLS (CONTINUED)

MAIN MENU

PICTURE

FEATURES

SOUND

HELP

EXIT

PICTURE MENU

FLESH CORRECTION

EXIT

2 OF 2

MORE...

CONVERGENCE

PICTURE MENU

SHARP

PICTURE

CLEARVIEW

EXIT

1 OF 2

COLOR TINT

MORE...

BRIGHT

Use the keys to merge the

RED fringe into the WHITE

cross. Press "M" to Continue.

Press "M" to Continue

- or -

Press " " to Return

If there is RED or BLUE

fringe on the WHITE cross,

use this adjustment to

improve the picture.

STOP ■

REW

§§

©©

PLAY

REC ●

STATUS

VOL

ON/OFF

TV /VCR

VCR

ACC

SWAP

FREEZE

POS

SIZE

ENTER

CLEAR

SURF

MUTE

PAUSE II

SLEEP

SMART

100+

POWER

O D E

1ST TIME SETUP

RED/BLUE CONVERGENCE

onvergence is the correct lining up of the red and blue

light paths on the TV screen. NOTE: If no color fringing (see Smart Help) shows, then no Convergence adjustments are necessary for your TV.

Select CONVERGENCE con-

trol.

With PICTURE MENU (2 of 2) on screen, move the RED highlight with the MENU buttons. Then

press the MENU (M) button.

If there is RED or BLUE color

fringing on the White cross, press the MENU button to continue.

Press the MENU buttons

to move the red or blue cross directly over the white cross on the TV screen.

The red or blue cross is properly adjusted when it is completely merged with the white cross. (No color appears around the edge of the white cross).

Press the STATUS button to

clear the screen when convergence adjustments are complete.

STOP

SMART HELP

Remember. Convergence

has been set at the factory for best viewing, but if one or more of the (red or blue) colors appear around the edges of objects (color fringing) follow the steps given in this section.

BEGIN

NOTE: Adjustments for “Multi-Point” onscreen color fringing can also be made as part of the TV’s Convergence control system. Follow the TV’s on-screen menu directions to select individual screen areas that can be readjusted and set for varying red/blue color fringing conditions. These multi-point settings can then be “Saved” to memory for the specific areas of the TV screen (or Factory Settings for convergence can be recalled and put back into place for use).

Press "M" to Adjust or Press "STATUS" to Continue

Use the keys to adjust

Press "M" to Save Press " " to Undo

Press " " to

recall Factory Settings

MULTI-POINT CONVERGENCE

MAIN MENU

PICTURE

FEATURES

SOUND

HELP

EXIT

1 OF 5

PICTURE SOURCE

MORE...

CLOSED

CAPTIONS

FEATURE MENU

CHANNEL

MEMORY

CABLE

TUNING

STOP ■

REW

§§

©©

PLAY

REC ●

STATUS

VOL

ON/OFF

TV /VCR

VCR

ACC

SWAP

FREEZE

POS

SIZE

ENTER

CLEAR

SURF

MUTE

PAUSE II

SLEEP

SMART

100+

POWER

O D E

1ST TIME SETUP

PICTURE SOURCE SELECT

HELP

EXIT

ANTENNA AUX 1 VIDEO AUX 1 Y P P AUX 2 VIDEO

FEATURE MENU CONTROL ADJUSTMENTS

PICTURE SOURCE

he picture for the TV can come

through either the ANTENNA plug or the AUDIO/VIDEO INput jacks (on the rear of the TV). The Picture Source control simply tells the TV which one of these picture sources it is to show on the TV screen.

Select PICTURE SOURCE

SELECT control.

With the FEATURES MENU on screen, move the RED highlight with the MENU buttons. Then press the MENU (M) button.

Press the MENU ▲▼ buttons

to move the RED highlight. Press the MENU button to turn the desired PICTURE SOURCE control ON (U).

ANTENNA- for a picture signal coming from the ANTENNA plug on the TV.

AUX 1 VIDEO- for a picture signal coming from the AUX 1 Video Input jack on the rear of the TV.

AUX 1 Y PB PR- for picture signals coming from the component (Y PB PR) luminance and color input jacks on the rear of the TV.

AUX 2 VIDEO- for a picture signal coming from the AUX 2 Video Input jack on the rear of the TV.

Press the STATUS button to

clear the screen.

STOP

BEGIN

SMART HELP

Remember, the Auxiliary

Input modes (AUX 1 VIDEO, etc.) must have a compatible video signal source properly connected (to the INPUT plug on the rear of the TV), or the TV screen will be blank.

CLOSE CAPTION PROGRAMS ON WXYZ

ALL ITEMS ARE EASTERN STANDARD TIME (EST)

CHECK LOCAL LISTINGS

FOR TIMES IN YOUR AREA

6:00

12:00 N

6:00

10:00

9:00

1:30

MAIN MENU

PICTURE

FEATURES

SOUND

HELP

EXIT

1 OF 5

PICTURE

SOURCE

MORE...

CLOSED

CAPTIONS

FEATURE MENU

CHANNEL

MEMORY

CABLE

TUNING

CLOSED CAPTION

HELP

EXIT

ALWAYS ON ALWAYS OFF ON DURING MUTE ONLY

CAPTION 1 CAPTION 2 CAPTION 3 CAPTION 4

TEXT 1 TEXT 2 TEXT 3 TEXT 4

STOP ■

REW

§§

©©

PLAY

REC ●

LIGHT

STATUS

VOL

ON/OFF

TV /VCR

VCR

ACC

SWAP

FREEZE

POS

SIZE

ENTER

CLEAR

SURF

MUTE

PAUSE II

SLEEP

SMART

100+

POWER

O D E

JOHN: WHY DID THEY MOVE THE MEETING UP TO THIS WEEK? MARSHA: I DON'T KNOW, BUT THEY ARE PUSHING TO CLOSE THE DEAL.

12:00

1ST TIME SETUP

losed Captioning (CC) allows

you to read the voice content of television programs on the TV screen. Designed to help the hearing impaired this feature uses on-screen "text boxes" to show dialogue and conversations while the TV program is in progress.

Select CLOSED CAPTIONING

control.

With the FEATURES MENU on screen, move the RED highlight with the MENU buttons. Then

press the MENU (M) button.

Press the MENU ▲▼ buttons

to move the RED highlight. Press the MENU button to select (U) the desired Closed Caption mode - For Example: "ALWAYS ON" and "CAPTION 1".

CAPTION 1, 2, 3, 4:

dialogue (and descriptions)

for the action on the captioned

TV program shows on-screen.

(See Important Note on this

page.) TEXT 1, 2, 3, 4:

often used for channel guide,

schedules, or bulletin board

information for CC programs.

After making your Caption mode

selection, press the STATUS button to clear the TV screen. The selected Closed Caption mode will be active.

To cancel, set the Closed Captioned feature to OFF when finished viewing.

STOP

FEATURE MENU CONTROLS (CONTINUED)

NOTE: Not all TV programs and product commercials are made for broadcast

with Closed Caption (CC) information included. Neither are all Closed Caption modes (CAPTION 1-4; or TEXT 1-4) necessarily being used by a broadcast station during the transmission of a closed caption program. Usually "CAPTION 1" is the most used mode to view captioned material. Refer to your area's TV program listings for the stations and times of Closed Caption shows.

CAPTION 1 mode

Example Screen Display

FULL SCREEN TEXT

will block TV screen from viewing

Closed Caption information will usually appear in black and white (although some broadcasters or networks may occasionally use color to highlight or draw attention to certain areas.)

CLOSED CAPTION

NOTE: The ON DURING MUTE ONLY control can

be used to set the TV to turn the Closed Caption mode "ON" whenever the MUTE button on the remote is pressed.

SMART HELP

Remember. Broadcast

stations will often use spelling abbreviations, symbols, dropouts and other grammatical shortcuts in order to keep pace with the on-screen action. These type factors vary upon the source of the captioned text material and do not indicate a need for service on the part of the TV.

BEGIN

This symbol will appear on channels that contain Closed Captioning material whenever the status display is shown.

FEATURE MENU CONTROLS (CONTINUED)

MAIN MENU

PICTURE

FEATURES

SOUND

HELP

EXIT

1 OF 5

PICTURE

SOURCE

MORE...

CLOSED

CAPTIONS

FEATURE MENU

CHANNEL

MEMORY

CABLE TUNING

HELP

EXIT

CABLE

NORMAL

STOP ■

REW

§§

©©

PLAY

REC ●

STATUS

VOL

ON/OFF

TV /VCR

VCR

ACC

SWAP

FREEZE

POS

SIZE

ENTER

CLEAR

SURF

MUTE

PAUSE II

SLEEP

SMART

100+

POWER

O D E

1ST TIME SETUP

OTE: If you went through

First Time Setup (in your Quick Use Guide), this task has already been completed for you.

You need to make sure the TV is set to pick up either Cable TV or Antenna signals. In other words, the TV needs to know if you connected a Cable TV signal or a normal antenna to its ANTENNA plug.

Select CABLE CHANNEL

TUNING control.

With the FEATURES MENU on screen, move the RED highlight with the MENU buttons.

Then press the MENU (M) button.

Press the MENU ▲▼ buttons

to move the RED highlight. Press the MENU button to select (U) the desired mode - For Example: CABLE.

CABLE- If you DO have

Cable TV connected

to the TV. Channels 1-125 are available.

NORMAL- If you have an

Antenna connected

to the TV. Channels 2-69 are available.

Press the STATUS button to

clear the screen.

CABLE TUNING

STOP

BEGIN

Press "M" to

Stop Auto-Program

EXIT

1 OF 5

PICTURE SOURCE

MORE...

CLOSED

CAPTIONS

FEATURE MENU

CHANNEL

MEMORY

CABLE

TUNING

AUTO-PROGRAMMING

CHANNEL MEMORY

1 2 3 4 5 6 7 8 9 1O 11 12

13 14 15 16 17 18 19 20 21 22 23 24

MAIN MENU

PICTURE

FEATURES

SOUND

HELP

EXIT

ADD/DELETE CHANNELS

START AUTO-PROGRAMMING

CHANNEL MEMORY

HELP

STOP ■

REW

§§

©©

PLAY

REC ●

STATUS

VOL

ON/OFF

TV /VCR

VCR

ACC

SWAP

FREEZE

POS

SIZE

ENTER

CLEAR

SURF

MUTE

PAUSE II

SLEEP

SMART

100+

POWER

O D E

1ST TIME SETUP

OTE: If you went through First

Time Setup (in your Quick Use Guide), this task has already been completed for you.

Your TV can automatically set itself for local area (or Cable TV) channels. This makes it easy for you to select only the TV stations in your area when the CHANNEL

▲▼

but-

tons are pressed.

Select CHANNEL MEMORY

(START AUTO-PROGRAM-

MING) control.

With the FEATURES MENU on screen, move the RED highlight with the MENU buttons. Then press

the MENU (M) button.

Press the MENU button to turn

AUTO-PROGRAMMING ON .

The TV shows which channel numbers are "SAVED" (U) as they are added into memory.

"Auto-programming CHANNEL MEMORY is finished" shows when the TV is through adding channels.

Press the STATUS or Menu (M)

button to clear the screen.

CHANNEL MEMORY

AUTO-PROGRAMMING

STOP

FEATURE MENU CONTROLS (CONTINUED)

U Channel Numbers are Saved in Memory

BEGIN

SMART HELP

Try it out. Press the

CHANNEL▲▼ buttons and

see which channels you can select. Remember. An Antenna or Cable TV

signal must first be connected to your TV so that channels can be saved.

If you want to delete any unwanted channels from the TV's memory, see "ADD/DELETE CHANNELS" on the next page.

EXIT

1 OF 5

PICTURE

SOURCE

MORE...

CLOSED

CAPTIONS

FEATURE MENU

CHANNEL

MEMORY

CABLE

TUNING

MAIN MENU

PICTURE

FEATURES

SOUND

HELP

EXIT

ADD/DELETE CHANNELS

START AUTO-PROGRAMMING

CHANNEL MEMORY

HELP

ADD/DELETE CHANNEL

Channel 19 Added

to DELETE CHANNEL

when FINISHED

CHOOSE CHANNEL

STOP ■

REW

§§

©©

PLAY

REC ●

STATUS

VOL

ON/OFF

TV /VCR

VCR

ACC

SWAP

FREEZE

POS

SIZE

ENTER

CLEAR

SURF

MUTE

PAUSE II

SLEEP

SMART

100+

POWER

O D E

1ST TIME SETUP

FEATURE MENU CONTROLS (CONTINUED)

uto-Programming (see previous

page) adds all the channels it can find (on your Antenna or Cable TV system) into the TV's memory. Add/Delete Channels makes it easy for you to add other channels, or drop unwanted channels, from the list of channels in the TV's memory.

Select CHANNEL MEMORY

(ADD/DELETE CHANNELS)

control. With the FEATURES MENU on

screen, move the RED highlight with the MENU buttons. Then

press the MENU (M) button.

Press the CHANNEL ▲▼ or

number buttons

to select the chan-

nel you want to add or delete.

Press the MENU © button to

ADD the channel into the TV's memory.

Press the MENU

§ button to

DELETE the channel from memory. Repeat steps 2 and 3 for each chan-

nel you wish to add or delete.

Press the STATUS or MENU

button to clear the screen.

ADD/DELETE CHANNELS

STOP

SMART HELP

Remember. You can also

add the AUX 1 VIDEO, AUX 2 VIDEO, or AUX 1 Y PB PR, modes just like a channel. Then by pressing the CHANNEL ▲▼ buttons the AUX(iliary)

mode can quickly be selected to use the desired set of Input jacks (see page 28).

Note: AUX(iliary) VIDEO modes are located between the lowest and highest channel numbers within the ADD/DELETE CHANNEL control screen.

BEGIN

MAIN MENU

PICTURE

FEATURES

SOUND

HELP

EXIT

1 OF 5

PICTURE SOURCE

MORE...

CLOSED

CAPTIONS

FEATURE MENU

EXIT

2 OF 5

MORE...

HALF HOUR

REMINDER

FEATURE MENU

CHANNEL

MEMORY

CABLE

TUNING

CHANNEL

DISPLAY

SLEEP TIMER

EXIT

SET CLOCK

SET CLOCK & ALARM TIMER

9 : 19 AM

SET CLOCK

PLEASE ENTER THE

CURRENT HOUR

STOP ■

REW

§§

©©

PLAY

REC ●

STATUS

VOL

ON/OFF

TV /VCR

VCR

ACC

SWAP

FREEZE

POS

SIZE

ENTER

CLEAR

SURF

MUTE

PAUSE II

SLEEP

SMART

100+

POWER

O D E

1ST TIME SETUP

SET CLOCK &

ALARM TIMER

SET ALARM TIMER

SET CLOCK

OTE: If you went through

First Time Setup (in your Quick Use Guide), this task has already been completed for you.

Your TV comes with an on-screen clock. During normal operation the clock appears on the screen with every channel change (and when the STATUS button is pressed).

Select SET CLOCK control.

With FEATURES MENU (2 of 5) on screen, move the RED highlight with the MENU buttons. Then

press the MENU (M) button.

Press the remote's number

buttons to set the time clock.

The remote's MENU buttons can also be used to set the hours, minutes and AM/PM portions of the clock.

Press the STATUS button to

set the clock in operation and clear

the screen.

STOP

BEGIN

FEATURE MENU CONTROLS (CONTINUED)

Remember, be sure to press "0" first and then the hour number for single digit entries.

TV Clock settings may be lost when the TV is unplugged (or AC power to the set is interrupted).

SMART

HELP

MAIN MENU

PICTURE

FEATURES

SOUND

HELP

EXIT

1 OF 5

PICTURE SOURCE

MORE...

CLOSED

CAPTIONS

FEATURE MENU

CHANNEL

MEMORY

CABLE

TUNING

EXIT

2 OF 5

MORE...

HALF HOUR REMINDER

FEATURE MENU

CHANNEL

DISPLAY

SLEEP TIMER

STOP ■

REW

§§

©©

PLAY

REC ●

STATUS

VOL

ON/OFF

TV /VCR

VCR

ACC

SWAP

FREEZE

POS

SIZE

ENTER

CLEAR

SURF

MUTE

PAUSE II

SLEEP

SMART

100+

POWER

O D E

1ST TIME SETUP

SET CLOCK &

ALARM TIMER

HALF HOUR REMINDER

HELP

EXIT

OFF

EVERY HALF HOUR

ith the Half Hour Reminder

control the TV automatically shows you the current time and channel every thirty minutes.

Select HALF HOUR

REMINDER control.

With FEATURES MENU (2 of 5) on screen, move the RED highlight with the MENU buttons.

Then press the MENU (M) button.

Press the MENU ▲▼ and

MENU (M) buttons to highlight

and select (U) the EVERY HALF HOUR item.

Press the STATUS button to

clear the screen.

HALF HOUR REMINDER

STOP

BEGIN

Remember, the Time and Channel Reminders will show on the hour and the halfhour for several seconds.

SMART

HELP

FEATURE MENU CONTROLS (CONTINUED)

MAIN MENU

PICTURE

FEATURES

SOUND

HELP

EXIT

1 OF 5

PICTURE

SOURCE

MORE...

CLOSED

CAPTIONS

FEATURE MENU

CHANNEL MEMORY

CABLE TUNING

EXIT

2 OF 5

MORE...

HALF HOUR

REMINDER

FEATURE MENU

CHANNEL

DISPLAY

SLEEP TIMER

7 : 30 AM

PLEASE ENTER THE HOUR TO TURN ON

EXIT

SET CLOCK

HELP

EXIT

ON OFF

STOP ■

REW

§§

©©

PLAY

REC ●

STATUS

VOL

ON/OFF

TV/VCR

VCR

ACC

SWAP

FREEZE

POS

SIZE

ENTER

CLEAR

SURF

MUTE

PAUSE II

SLEEP

SMART

100+

POWER

O D E

1ST TIME SETUP

SET CLOCK &

ALARM TIMER

SET CLOCK & ALARM TIMER

SET ALARM TIMER

SET ALARM TIME

ust like an alarm clock you can set the TV to turn itself on at the

same time everyday.

Select SET ALARM TIMER

control. With FEATURES MENU (2 of 5)

on screen, move the RED highlight with the MENU (M) buttons.

Then press the MENU button.

Press the MENU ▲▼ and

MENU (M) buttons to highlight

and select "ON" (U).

Press the MENU ▲▼ and

then the MENU (M) buttons to

select "SET ALARM TIME".

Press the remote's number

buttons to set the "TURN ON"

time for the TV. (Press MENU ▲ ▼ for AM or PM.)

Press the STATUS button to

set the "ALARM TIME" and clear the screen.

SET ALARM TIMER

STOP

BEGIN

STOP ■

REW

§§

©©

PLAY

REC ●

STATUS

VOL

ON/OFF

TV /VCR

VCR

ACC

SWAP

FREEZE

POS

SIZE

ENTER

CLEAR

SURF

MUTE

PAUSE II

SLEEP

SMART

100+

POWER

O D E

1 : 15

Press SLEEP to CHANGE

SET SLEEP TIMER

ave you ever fallen asleep in

front of the TV only to have it wake you up at two in the morning with a test pattern screeching in your ears? Well, your TV can save you all that trouble by automatically turning itself off.

Press the SLEEP button on the

remote control. Note: you can also select the

SLEEP control with the TV’s onscreen FEATURES MENU (2 of 5). Move the RED highlight with the MENU (M) buttons. Then press

the MENU button.

Press the SLEEP button repeat-

edly to pick the amount of time (15 minutes to 2 hours ahead) before the TV will turn itself off.

The (+), (-) buttons can also be used to set the amount of time.

Press the STATUS or MENU

(M) button to clear the screen after

you have set the time for the TV to turn off.

STOP

Remember, to see how many minutes are left before the TV shuts itself off, reselect the SLEEP TIMER control screen.

To stop a SLEEP TIMER setting, reset the timer back to OFF. (Turning the TV off and on, or pressing a button during the last minute of a timer setting, will also cancel a setting.)

A few seconds before the TV is to shut off a message will come on the screen telling you

GOOD NIGHT.

SMART

HELP

BEGIN

SLEEP TIMER

FEATURE MENU CONTROLS (CONTINUED)

MAIN MENU

PICTURE

FEATURES

SOUND

HELP

EXIT

1 OF 3

PICTURE SOURCE

MORE...

CLOSED

CAPTIONS

FEATURE MENU

CHANNEL MEMORY

CABLE

TUNING

EXIT

2 OF 3

MORE...

HALF HOUR

REMINDER

FEATURE MENU

CHANNEL

DISPLAY

SLEEP TIMER

ACCESS CODE SETUP

X X X X

to EXIT

First Enter Your Current Access Code.

ACCESS CODE SETUP

to EXIT

TRY AGAIN. If You've Forgotten Your Access Code go to SETUP CODE and see Owner's Manual.

X X X X

INCORRECT ACCESS CODE

ACCESS CODE SETUP

to EXIT

Access Code Changed.

X X X X

for CHANNEL BLOCKING

ACCESS CODE SETUP

to EXIT

Next Enter Your New Access Code.

X X X X

STOP ■

REW

§§

©©

PLAY

REC ●

STATUS

VOL

ON/OFF

TV /VCR

VCR

ACC

SWAP

FREEZE

POS

SIZE

ENTER

CLEAR

SURF

MUTE

PAUSE II

SLEEP

SMART

100+

POWER

O D E

1ST TIME SETUP

SET CLOCK &

ALARM TIMER

EXIT

3 OF 5

FEATURE MENU

LANGUAGE SELECTION

MORE...

PARENTAL

CONTROL

PARENTAL CONTROL

HELP

EXIT

CHANNEL

BLOCKING

SETUP

CODE

CONTENT

ADVISORY

for CONTENT ADVISORY

PARENTAL CONTROL

SETUP CODE NUMBER

arental Control allows parents

to block out, or "censor", any channels they think children should not watch. A channel placed under Parental Control cannot be viewed until a correct access code is used to unlock the channel for viewing.

First let's set your Parental Code:

Select the PARENTAL CON-

TROL.

With FEATURES MENU (3 of 5) on screen, move the RED highlight with the MENU buttons. Then

press the MENU (M) button.

Press the MENU ▲▼ and

MENU (M) buttons to highlight

and select the SETUP CODE item.

Press 0, 7, 1, 1 on the remote.

"XXXX" shows on the ACCESS

CODE SETUP screen as you press the number buttons.

"INCORRECT ACCESS CODE TRY AGAIN" will also show on the screen.

Press 0, 7, 1, 1 on the remote

again.

"Next Enter Your New Access Code" shows on the screen.

Enter a new four digit number

code using the remote.

"Access Code Changed" shows on

the screen to let you know the new code has been set.

Continue to the next page to find out how to "BLOCK" channels from viewing.

BEGIN

to "block" channels.

• Press MENU § to go to "Content

Advisory" (or TV and Movie Ratings system of channel blocking).

• Press MENU to return to the Parental

Control Menu screen.

• Press STATUS to clear the screen.

SMART HELP

Note to Parents - it isn't

possible to unlock or defeat your Censor Access Code without changing to a new code number. So if your Code number changes, and you didn't change it yourself, then you will know that someone has altered the code and the blanked out channel has been viewed.

NOTE:Your TV left the factory with the Parental Code set to "0000". If you are using your TV and the Parental Control for the first time, and don't want to SETUP a new Access code number, you can use the "0000" number to block channels - see next page. The "0711" Parental Code (shown on this page) is given as a default or way to reset the Code when the current Access number is not known.

+ 36 hidden pages