Philips 9P6031C1, 9P5531C1, 9P5534C1, 9P6034C1, 9P5034C1 User Manual

Instructions for use 9P5031C1 9P5531C1 9P6031C1 9P5034C1 9P5534C1 9P6034C1
Projection
Television
Once your PHILIPS MAGNAVOX purchase is registered, you’re eligible to receive all the privileges of
owning a PHILIPS MAGNAVOX product. So complete and return the Warranty Registration Card
enclosed with your purchase at once. And take advantage of these important benefits.
all the benefits you’re entitled to.
Congratulations
on your
purchase,
and welcome to the
“family!”
Dear PHILIPS MAGNAVOX product owner:
Thank you for your confidence in PHILIPS MAGNAVOX. You’ve selected one of the best-built, best­backed products available today. And we’ll do everything in our power to keep you happy with your purchase for many years to come.
As a member of the PHILIPS MAGNAVOX “family,” you’re entitled to protection by one of the most comprehensive warranties and outstanding service networks in the industry.
What’s more, your purchase guarantees you’ll receive all the information and special of fers for which you qualify, plus easy access to accessories from our convenient home shopping network.
And most importantly you can count on our uncompromising commitment to your total satisfaction. All of this is our way of saying welcome–and thanks for investing in a PHILIPS MAGNAVOX product.
Sincerely ,
Robert Minkhorst President and Chief Executive Officer
Know these
safety
symbols
t This “bolt of lightning” indicates uninsulated material within your unit which may cause an
electrical shock. For the safety of everyone in your household, please do not remove the product covering.
s The “exclamation point” calls attention to features for which you should read the enclosed lit-
erature closely to prevent operating and maintenance problems. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE. CAUTION: To prevent electric shock, match wide blade of plug to wide slot, and fully insert. ATTENTION: Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la
borne correspondante de la prise et pousser jusqu’au fond.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Warranty
Verification
Registering your product within 10 days confirms your right to max­imum protection under the terms and conditions of your PHILIPS MAGNAVOX warranty.
Owner
Confirmation
Your completed Warranty Registration Card serves as verification of ownership in the event of product theft or loss.
Model
Registration
Returning your Warranty Registration Card right away guar­antees you’ll receive all the infor­mation and special offers which you qualify for as the owner of your model.
P.S. Remember, to get the most from your PHILIPS
MAGNAVOX product, you must return your Warranty Registration Card within 10 days. So please mail it to us right now!
R
E
G
I
S
T
R
A
T
I
O
N
N
E
E
D
E
D
W
I
T
H
I
N
1
0
D
A
Y
S
Hurry!
Visit our World Wide Web Site at http://www.philipsmagnavox.com
2
This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of.
1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated.
2. Retain Instructions - The safety and operating instructions should be retained for future reference.
3. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to.
4. Follow Instructions - All operating and use instructions should be followed.
5. Water and Moisture - The appliance should not be used near water
- for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement or near a swimming pool, etc.
6. Carts and Stands - The appliance should be used only with a cart or stand that is recommended by the manufacturer.
6A. An appliance and cart combination should be moved
with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.
6B. Tilt/Stability - All televisions must comply with recommended inter-
national global safety standards for tilt and stability properties of its cabinet design.
Do not compromise these design standards by applying exces-
sive pull force to the front, or top, of the cabinet which could ultimately overturn the product.
Also, do not endanger yourself, or children, by placing elec-
tronic equipment/toys on the top of the cabinet. Such items could unsuspectingly fall from the top of the set and cause product damage and/or personal injury.
7. Wall or Ceiling Mounting - The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer.
8. Ventilation - The appliance should be situated so that its location or position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or, placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.
9. Heat - The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.
10. Power Sources - The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.
11. Power-Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords and plugs, convenience receptacles, and the point where they exit from the appliance.
12. Cleaning - The appliance should be cleaned only as recommended by the manufacturer.
13. Power Lines - An outdoor antenna should be located away from power lines.
14. Outdoor Antenna Grounding - If an outside antenna is connected to the receiver, be sure the antenna system is grounded so as to pro­vide some protection against voltage surges and built up static charges.
Section 810 of the National Electric Code, ANSI/NFPA No. 70-1984, provides information with respect to proper grounding of the mats and supporting structure grounding of the lead-in wire to an anten­na discharge unit, size of grounding connectors, location of anten­na-discharge unit, connection to grounding electrodes and require­ments for the grounding electrode. See Fig. below.
15. Non-use Periods - The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time.
16. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through open­ings.
17. Damage Requiring Service - The appliance should be serviced by qualified service personnel when:
A. The power supply cord or the plug has been damaged; or B. Objects have fallen, or liquid has been spilled into the appli-
ance; or
C. The appliance has been exposed to rain; or D. The appliance does not appear to operate normally or exhibits
a marked change in performance; or
E. The appliance has been dropped, or the enclosure damaged.
18. Servicing - The user should not attempt to service the appliance
beyond that described in the operating instructions. All other servic­ing should be referred to qualified service personnel.
Note to the CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that pro­vides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
SAFETY INSTRUCTIONS - Read before operating equipment
ANTENNA LEAD IN WIRE
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS (NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)
GROUND CLAMP
ELECTRIC SERVICE EQUIPMENT
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE (NEC)
Example of Antenna Grounding as per NEC - National Electric Code
3
TABLE OF CONTENTS
Getting Started
Welcome/Product Registration...................2
Safety/Precautions .....................................................3
Table of Contents.......................................................4
Features and Model Information................................5
On-Screen Features
PICTURE MENU
Adjusting Color, Brightness, Sharpness,
Tint, and Picture Controls...................................6
Using the Clearview Control...............................7
Using the Flesh Correction Control ....................7
Adjusting the TV's Convergence Control...........8
FEATURES MENU
Selecting a Picture Source ..................................9
Setting the TV for Closed Captioning...............10
Setting the TV for Cable or Antenna Signals....11
Adding Channels in Memory (Automatically) .12
Adding Channels in Memory (Manually).........13
Setting the TV Clock.........................................14
Using the Time/Channel Reminder Control......14
Turn-On Timer..................................................15
Using the Sleep Timer Control .........................15
Using Parental Control/Content Advisory:
• Code Setup/Blocking Channels...............16-17
• Content Advisory - Movie Ratings .........18-19
• Parental Guidelines.......................................20
• Blocking Options/Review Settings...............21
Adjusting the Channel Display Control............22
Using the Language Control .............................22
SOUND MENU
Adjusting Bass, Treble, and Balance Sound
Controls.............................................................23
Setting the Bass Boost Control ........................23
Setting the TV for Stereo and SAP Programs ..24
Using the Sound Image Control........................25
Using the Volume Display Control...................25
Using the TV Speaker On/Off Control with
the Audio Output jacks .....................................26
Surround Sound Speaker Connections and
Variable Audio Output Control ........................27
Using the TV's Audio/Video Input and
Output Jacks ...............................................28-31
Remote Control Operation
Using the Smart Picture Control.................32
Using the Smart Sound Control...............................32
Using the Smart Surf Control and the Surf button...33 Setting the TV Remote to Work Optional Accessory
Devices:
• Direct Entry/Code Number Method ...............34-35
• Search and Identify Method ................................36
• Remote Control Direct Entry Code Lists .......37-38
Using the Remote's VCR buttons ............................39
Picture-In-Picture (PIP)
How to Use PIP (Connections) ............40-41
How to Use PIP with the TV Remote......................42
Selecting the Picture Source for PIP........................43
Adjusting Picture-in-Picture Color and Tint............44
More PIP Connections (Cable Converter)...............45
General Information
Tips if Something Isn’t Working...............46
TV Help Menu.........................................................47
Glossary of TV Terms .............................................48
Index ........................................................................49
Factory Service Locations..................................50-51
Warranty ..................................................................52
Copyright © 1999 Philips Consumer Electronics Company. All rights reserved.
12
1
2
3
4
5
6
7
8
9
10
11
Use the simple Set-Up Guide (supplied with your TV information packet) for details on:
• Antenna Hook-ups
• First Time Set-Up
(Automatic Settings)
• Basic TV and Remote
Control Operation
• On-Screen Menu Use
SET-UP AND QUICK USE GUIDE
SET-U
P ANDQUICKUSEGUIDE
TABLEOF CONTENTS
Getting Started
Warning/Precautions..................................1
Hooking Up Your TV.................................................1
How to Use the First Time Set-Up ...........................2
Basic TV and Remote Control Operation.................3
How to Use the On-Screen Menu Controls...............4
1
2 1
2 3
4 5 6
7
8
9
1
0
1
1
• For details on product registration, warranty, and service refer to the other literature included with your
TV information packet. Please retain all these materials and keep them handy for future reference.
A
combination (outdoor
or indoor) antenna receives normal broadcast channels 2-13 (VHF) and 14-69 (UHF). Your con­nection to such an antenna is easy since there is only one antenna plug (75­ohm) on the back of your TV - and that’s where the antenna goes.
ANTENNA
OUTDOOR/INDOOR
Remember, be sure to set the TV for the type sig­nal you've connect­ed (see "SETUP" on page 2 of this Guide.)
To order any optional accessory contact your dealer or call the toll-free accessory ordering number (1-800-851-
8885).
SMART HELP
If your antenna has a
round cableconnector(75
ohm) on the end,then you're ready to connect it to the TV.
If your antenna has flat twin­lead wire (300 ohm),you first
need to attach the antenna wires to the screws on a 300 to 75 ohm adapter.
Push the round endof the
adapter (or antenna) onto the ANTENNA plug on the rear of the TV. If the round end of the antenna wire is threaded,screw it down tight.
2
STOP
300 to 75 Adapter
(483521827003)
Twin Lead Wire
Back of TV
BEGIN
1
Note:For homes with separate UHF and VHF anten­nas you will need an optional combiner to connect to the TV.
U/V Combiner
75-300 Ohm Adapter
Round Cable 75Ohm
Combination VHF/UHF Antenna
(Outdoor or Indoor)
Back of TV
Projection Television and Remote Control
OR
WARNING:TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS UNIT TO
RAIN OR EXCESSIVE MOISTURE.
NOTE:This owner's manual is used with several different television models. Not all features (and drawings) dis­cussed in this manual will necessarily match those found with your television set. This is normal and does not require you contacting your dealer or requesting service.
VOL
MENU
CH
STATUS/EXIT
4
NOTE: This owner's manual is used with several differ­ent television models. Not all features (and drawings) discussed in this manual will necessarily match those found with your television set. This is normal and does not require you contacting your dealer or requesting ser­vice.
Because of continuous product improvements, the informa­tion mentioned in the documents accompanying your product are subject to change without notice.
UHF
300
REAR SURROUND SPEAKERS
Y
P
B
P
R
+
+
L
R
S-VIDEO
FIXED
VIDEO
VIDEO OUT
L
VAR
AUDIO
R
V
V
H
F
V
L
R
AUX 1AUX 2
H
AUDIO OUT
INPUTS
F
ANT A/CABLE 75 V UHF/VHF
OR
ER T
P A D A
5-300 7
FIXED
VIDEO
VIDEO OUT
L
VAR
AUDIO
L
R
R
AUDIO OUT
AUX 1AUX 2
INPUTS
ANT A/CABLE 75 V UHF/VHF
REAR SURROUND SPEAKERS
Y
P
B
P
R
+
+
L
R
S-VIDEO
FIXED
VIDEO
VIDEO OUT
L
VAR
AUDIO
R
L R
AUX 1AUX 2
AUDIO OUT
INPUTS
ANT A/CABLE 75 V UHF/VHF
First Time Set Up - automatically sets the TV for local channels and the correct picture signal (antenna or cable). See your Set-up and Quick Use Guide for details.
Infrared Remote Control - operates your TV set and a variety of wireless remote control VCRs, Cable TV Converters, and other accessory equipment.
Standard TV broadcast (VHF/UHF) or Cable TV (CATV) channel capability.
Closed Captioning - allows the viewer to read TV
program dialogue or voice conversations as on-screen text.
Automatic Programming of channels - for quick and easy selection of favorite stations available in your area.
Picture-In-Picture (PIP) - can show a TV program and the direct video output from an accessory (VCR, etc.) onto the TV screen at the same time.
Stereo TV - with a built-in audio amplifier and a twin speaker system, reception of TV programs in both broadcast stereo sound or (SAP) bilingual broad­cast are available.
On-Screen Features - display helpful information for the setting of TV controls (such as help messages, operating tips and glossary).
Parental Controls - for “censoring” or blocking out channels to keep children from watching undesirable programming.
Audio/Video Jacks - for direct connections with VCRs (and other accessories) for quality TV picture and sound playback.Component video Input connec­tors are also available for high fidelity color and pic­ture resolution when using digital video source mate­rial, such as DVD.
Surround Sound -this TV set contains external audio speaker connections for a more dynamic sound effect.
Sleep-Timer - automatically turns the TV OFF at preset time intervals.
Smart Button - for the control of TV Sound and Picture levels. Use the Smart Button on the remote to quickly adjust Smart Sound (to set TV Volume levels during program changes or commercial breaks); Smart Picture (for programmed video level adjust­ments on a variety of program sources); and Smart Surf (for quick one button channel selection of up to 10 of your favorite channels).
FEATURES
As you unpack your TV please note that the fol-
lowing items have been included with your set:
• Owner's Manual
- Safety Tip Information
- Factory Service Center Locations
• Warranty Registration Card
• Remote Control Transmitter
• Batteries for Remote Control Use Please take a few minutes to complete your regis-
tration card. The serial number for the TV is on the back of the set.
Refer to the back of this manual for instructions on the cleaning and care of the TV.
12
1
2
3
4
5
6
7
8
9
10
11
5
End-of-Life disposal
Your new projection television and its packaging contain materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount of reusable materials and minimize the amounts which need to be properly disposed.
Your product also uses batteries which should not be thrown away when depleted, but should be handed in and disposed of as small chemical waste.
Please find out about the local regulations on how to dispose of your old television, batteries, and packaging materials whenever you replace exist­ing equipment.
Digital Ready - Projection Television capable of connecting to both the current analog television sig­nals of today as well as interfacing with new upcom­ing digital source playback products and devices. This TV includes multiple signal connectors (Component Video, S-Video, Composite Video) which give you a variety of equipment playback options for digital set top boxes, satellite receivers, cable boxes, and other digital devices.
While there may exist some digital devices with con­nections not available on this television, you should be adequately prepared for the vast majority of prod­ucts coming onto the digital consumer electronics’ market. Note: You should always use the connection output on digital devices that gives the highest level of picture quality possible. As listed above the Component Video (or Y PB PR) input delivers the best color and picture reproduction; followed by S­Video; and then Composite Video. In addition to the above listed inputs, your television also includes the standard 75ohm cable signal connector for use with antennas or analog cable boxes.
PICTURE MENU CONTROL ADJUSTMENTS
MAIN MENU
PICTURE
FEATURES
SOUND
HELP
EXIT
PICTURE MENU
SHARP
PICTURE
CLEARVIEW
EXIT
1 OF 2
COLOR TINT
MORE...
BRIGHT
HELP
EXIT
NEXT...
MIN
MAX
COLOR
STOP
REW
§§
FF
©©
PLAY
©
REC
STATUS
VOL
CH
1
2
3
4
5
6
7
8
9
0
ON/OFF
TV /VCR
VCR
ACC
TV
SWAP
FREEZE
POS
SIZE
ENTER
M
E
N
U
M
CLEAR
~
!
SURF
MUTE
PAUSE II
SLEEP
SMART
100+
POWER
M
O D E
1
1
2
3
1ST TIME SETUP
COLOR, BRIGHTNESS,
SHARPNESS, TINT, PICTURE
STOP
T
o adjust your TV color and
picture controls, select a TV channel and follow the steps shown below:
Select BRIGHTNESS, PIC-
TURE, COLOR, TINT, or
SHARPNESS picture control.
With the PICTURE MENU on screen, move the RED highlight with the MENU buttons. Then
press the MENU (M) button.
Press the (+) or (-) buttons to
adjust the selected control.
Press the STATUS button to
clear the screen.
1
2
3
SMART HELP
Remember. When the bar
scale is centered, control set­tings are at normal mid-range lev­els.
BRIGHTNESS Press (-) or (+) until dark parts of the picture show good detail.
PICTURE Press (-) or (+) until whitest parts of the picture are as bright as you prefer.
COLOR Press (-) or (+) to add or eliminate color.
TINT Press (-) or (+) to obtain natu­ral skin tones. (Also see Flesh Correction on page 7 for more infor­mation).
SHARPNESS Press (-) or (+) to improve detail in the picture.
BEGIN
Select and then press MENU (M) button to view an explanation of the selected feature.
Select and then press MENU (M) button to view additional controls grouped under same feature heading. For Example: Tint, Brightness, Picture, etc.
6
PICTURE MENU CONTROLS (CONTINUED)
MAIN MENU
PICTURE
FEATURES
SOUND
HELP
EXIT
SHARP
PICTURE
EXIT
1 OF 2
COLOR TINT
MORE...
BRIGHT
CLEARVIEW
PICTURE MENU
CLEARVIEW
EXIT
NEXT...
NORMAL
ENHANCED
HELP
STOP
REW
§§
FF
©©
PLAY
©
REC
STATUS
VOL
CH
1
2
3
4
5
6
7
8
9
0
ON/OFF
TV /VCR
VCR
ACC
TV
SWAP
FREEZE
POS
SIZE
ENTER
M
E
N
U
M
CLEAR
~
!
SURF
MUTE
PAUSE II
SLEEP
SMART
100+
POWER
M
O D E
1
1
3
2
2
1ST TIME SETUP
C
learview is a sharpness feature
which smoothes out back­ground snow (or picture noise) without losing picture image detail or crispness.
Select CLEARVIEW control.
With the PICTURE MENU on screen, move the RED highlight with the MENU buttons. Then
press the MENU (M) button.
Press the MENU ▲▼ buttons
to move the RED highlight. Press the MENU button to select (U) the ENHANCED mode.
Press the STATUS button to
clear the screen.
CLEARVIEW
STOP
1
2
3
BEGIN
7
MAIN MENU
PICTURE
FEATURES
SOUND
HELP
EXIT
PICTURE MENU
EXIT
2 OF 2
MORE...
PICTURE MENU
SHARP
PICTURE
CLEARVIEW
EXIT
1 OF 2
COLOR TINT
MORE...
BRIGHT
FLESH CORRECTION
CONVERGENCE
FLESH CORRECTION
HELP
EXIT
ON
OFF
STOP
REW
§§
FF
©©
PLAY
©
REC
STATUS
VOL
CH
1
2
3
4
5
6
7
8
9
0
ON/OFF
TV /VCR
VCR
ACC
TV
SWAP
FREEZE
POS
SIZE
ENTER
M
E
N
U
M
CLEAR
~
!
SURF
MUTE
PAUSE II
SLEEP
SMART
100+
POWER
M
O D E
1
1
3
2
2
1ST TIME SETUP
U
se the Flesh Correction con-
trol to keep skin tone hues (or facial tint) from varying from TV channel to TV channel.
Select FLESH CORREC-
TION control.
With PICTURE MENU (2 of 2) on screen, move the RED highlight with the MENU buttons. Then
press the MENU (M) button.
Press the MENU ▲▼ buttons
to move the RED highlight. Press the MENU button to turn (U) the FLESH CORRECTION control ON.
Press the STATUS button to
clear the screen.
FLESH CORRECTION
STOP
1
2
3
BEGIN
PICTURE MENU CONTROLS (CONTINUED)
MAIN MENU
PICTURE
FEATURES
SOUND
HELP
EXIT
PICTURE MENU
FLESH CORRECTION
EXIT
2 OF 2
MORE...
CONVERGENCE
PICTURE MENU
SHARP
PICTURE
CLEARVIEW
EXIT
1 OF 2
COLOR TINT
MORE...
BRIGHT
Use the keys to merge the
RED fringe into the WHITE
cross. Press "M" to Continue.
Press "M" to Continue
- or -
Press " " to Return
If there is RED or BLUE
fringe on the WHITE cross,
use this adjustment to
improve the picture.
2
3
STOP
REW
§§
FF
©©
PLAY
©
REC
STATUS
VOL
CH
1
2
3
4
5
6
7
8
9
0
ON/OFF
TV /VCR
VCR
ACC
TV
SWAP
FREEZE
POS
SIZE
ENTER
M
E
N
U
M
CLEAR
~
!
SURF
MUTE
PAUSE II
SLEEP
SMART
100+
POWER
M
O D E
1
1
4
2
3
1ST TIME SETUP
RED/BLUE CONVERGENCE
C
onvergence is the correct lin­ing up of the red and blue
light paths on the TV screen. NOTE: If no color fringing (see Smart Help) shows, then no Convergence adjustments are nec­essary for your TV.
Select CONVERGENCE con-
trol.
With PICTURE MENU (2 of 2) on screen, move the RED highlight with the MENU buttons. Then
press the MENU (M) button.
If there is RED or BLUE color
fringing on the White cross, press the MENU button to continue.
Press the MENU buttons
to move the red or blue cross directly over the white cross on the TV screen.
The red or blue cross is properly adjusted when it is completely merged with the white cross. (No color appears around the edge of the white cross).
Press the STATUS button to
clear the screen when convergence adjustments are complete.
1
2
3
STOP
SMART HELP
Remember. Convergence
has been set at the factory for best viewing, but if one or more of the (red or blue) colors appear around the edges of objects (color fringing) follow the steps given in this section.
BEGIN
4
8
NOTE: Adjustments for “Multi-Point” on­screen color fringing can also be made as part of the TV’s Convergence control system. Follow the TV’s on-screen menu directions to select individual screen areas that can be read­justed and set for varying red/blue color fring­ing conditions. These multi-point settings can then be “Saved” to memory for the specific areas of the TV screen (or Factory Settings for convergence can be recalled and put back into place for use).
Press "M" to Adjust or Press "STATUS" to Continue
Use the keys to adjust
Press "M" to Save Press " " to Undo
Press " " to
recall Factory Settings
MULTI-POINT CONVERGENCE
MAIN MENU
PICTURE
FEATURES
SOUND
HELP
EXIT
EXIT
1 OF 5
PICTURE SOURCE
MORE...
CLOSED
CAPTIONS
FEATURE MENU
CHANNEL
MEMORY
CABLE
TUNING
STOP
REW
§§
FF
©©
PLAY
©
REC
STATUS
VOL
CH
1
2
3
4
5
6
7
8
9
0
ON/OFF
TV /VCR
VCR
ACC
TV
SWAP
FREEZE
POS
SIZE
ENTER
M
E
N
U
M
CLEAR
~
!
SURF
MUTE
PAUSE II
SLEEP
SMART
100+
POWER
M
O D E
1
1
3
2
2
1ST TIME SETUP
PICTURE SOURCE SELECT
HELP
EXIT
ANTENNA AUX 1 VIDEO AUX 1 Y P P AUX 2 VIDEO
B
R
FEATURE MENU CONTROL ADJUSTMENTS
PICTURE SOURCE
T
he picture for the TV can come
through either the ANTENNA plug or the AUDIO/VIDEO INput jacks (on the rear of the TV). The Picture Source control simply tells the TV which one of these picture sources it is to show on the TV screen.
Select PICTURE SOURCE
SELECT control.
With the FEATURES MENU on screen, move the RED highlight with the MENU buttons. Then press the MENU (M) button.
Press the MENU ▲▼ buttons
to move the RED highlight. Press the MENU button to turn the desired PICTURE SOURCE control ON (U).
ANTENNA- for a picture signal coming from the ANTENNA plug on the TV.
AUX 1 VIDEO- for a picture sig­nal coming from the AUX 1 Video Input jack on the rear of the TV.
AUX 1 Y PB PR- for picture sig­nals coming from the component (Y PB PR) luminance and color input jacks on the rear of the TV.
AUX 2 VIDEO- for a picture sig­nal coming from the AUX 2 Video Input jack on the rear of the TV.
Press the STATUS button to
clear the screen.
STOP
1
2
3
BEGIN
9
SMART HELP
Remember, the Auxiliary
Input modes (AUX 1 VIDEO, etc.) must have a compat­ible video signal source properly connected (to the INPUT plug on the rear of the TV), or the TV screen will be blank.
CLOSE CAPTION PROGRAMS ON WXYZ
ALL ITEMS ARE EASTERN STANDARD TIME (EST)
CHECK LOCAL LISTINGS
FOR TIMES IN YOUR AREA
6:00
12:00 N
6:00
10:00
9:00
1:30
MAIN MENU
PICTURE
FEATURES
SOUND
HELP
EXIT
EXIT
1 OF 5
PICTURE
SOURCE
MORE...
CLOSED
CAPTIONS
FEATURE MENU
CHANNEL
MEMORY
CABLE
TUNING
CLOSED CAPTION
HELP
EXIT
ALWAYS ON ALWAYS OFF ON DURING MUTE ONLY
CAPTION 1 CAPTION 2 CAPTION 3 CAPTION 4
TEXT 1 TEXT 2 TEXT 3 TEXT 4
STOP
REW
§§
FF
©©
PLAY
©
REC
LIGHT
STATUS
VOL
CH
1
2
3
4
5
6
7
8
9
0
ON/OFF
TV /VCR
VCR
ACC
TV
SWAP
FREEZE
POS
SIZE
ENTER
M
E
N
U
M
CLEAR
~
!
SURF
MUTE
PAUSE II
SLEEP
SMART
100+
POWER
M
O D E
1
1
3
2
2
JOHN: WHY DID THEY MOVE THE MEETING UP TO THIS WEEK? MARSHA: I DON'T KNOW, BUT THEY ARE PUSHING TO CLOSE THE DEAL.
12:00
CC
1ST TIME SETUP
C
losed Captioning (CC) allows
you to read the voice content of television programs on the TV screen. Designed to help the hearing impaired this feature uses on-screen "text boxes" to show dialogue and conversations while the TV program is in progress.
Select CLOSED CAPTIONING
control.
With the FEATURES MENU on screen, move the RED highlight with the MENU buttons. Then
press the MENU (M) button.
Press the MENU ▲▼ buttons
to move the RED highlight. Press the MENU button to select (U) the desired Closed Caption mode - For Example: "ALWAYS ON" and "CAPTION 1".
CAPTION 1, 2, 3, 4:
dialogue (and descriptions)
for the action on the captioned
TV program shows on-screen.
(See Important Note on this
page.) TEXT 1, 2, 3, 4:
often used for channel guide,
schedules, or bulletin board
information for CC programs.
After making your Caption mode
selection, press the STATUS button to clear the TV screen. The selected Closed Caption mode will be active.
To cancel, set the Closed Captioned feature to OFF when finished view­ing.
1
2
STOP
FEATURE MENU CONTROLS (CONTINUED)
NOTE: Not all TV programs and product commercials are made for broadcast
with Closed Caption (CC) information included. Neither are all Closed Caption modes (CAPTION 1-4; or TEXT 1-4) necessarily being used by a broadcast station during the transmission of a closed caption program. Usually "CAPTION 1" is the most used mode to view captioned material. Refer to your area's TV program list­ings for the stations and times of Closed Caption shows.
3
CAPTION 1 mode
Example Screen Display
FULL SCREEN TEXT
will block TV screen from viewing
Closed Caption information will usually appear in black and white (although some broadcasters or networks may occasionally use color to high­light or draw attention to certain areas.)
CLOSED CAPTION
NOTE: The ON DURING MUTE ONLY control can
be used to set the TV to turn the Closed Caption mode "ON" whenever the MUTE button on the remote is pressed.
SMART HELP
Remember. Broadcast
stations will often use spelling abbreviations, symbols, dropouts and other grammatical shortcuts in order to keep pace with the on-screen action. These type factors vary upon the source of the captioned text material and do not indicate a need for service on the part of the TV.
BEGIN
This symbol will appear on channels that con­tain Closed Captioning material whenever the status display is shown.
10
FEATURE MENU CONTROLS (CONTINUED)
MAIN MENU
PICTURE
FEATURES
SOUND
HELP
EXIT
EXIT
1 OF 5
PICTURE
SOURCE
MORE...
CLOSED
CAPTIONS
FEATURE MENU
CHANNEL
MEMORY
CABLE TUNING
CABLE TUNING
HELP
EXIT
CABLE
NORMAL
STOP
REW
§§
FF
©©
PLAY
©
REC
STATUS
VOL
CH
1
2
3
4
5
6
7
8
9
0
ON/OFF
TV /VCR
VCR
ACC
TV
SWAP
FREEZE
POS
SIZE
ENTER
M
E
N
U
M
CLEAR
~
!
SURF
MUTE
PAUSE II
SLEEP
SMART
100+
POWER
M
O D E
2
1
1
3
2
1ST TIME SETUP
N
OTE: If you went through
First Time Setup (in your Quick Use Guide), this task has already been completed for you.
You need to make sure the TV is set to pick up either Cable TV or Antenna signals. In other words, the TV needs to know if you con­nected a Cable TV signal or a nor­mal antenna to its ANTENNA plug.
Select CABLE CHANNEL
TUNING control.
With the FEATURES MENU on screen, move the RED highlight with the MENU buttons.
Then press the MENU (M) button.
Press the MENU ▲▼ buttons
to move the RED highlight. Press the MENU button to select (U) the desired mode - For Example: CABLE.
CABLE- If you DO have
Cable TV connected
to the TV. Channels 1-125 are available.
NORMAL- If you have an
Antenna connected
to the TV. Channels 2-69 are available.
Press the STATUS button to
clear the screen.
CABLE TUNING
STOP
1
2
3
BEGIN
11
Press "M" to
Stop Auto-Program
EXIT
1 OF 5
PICTURE SOURCE
MORE...
CLOSED
CAPTIONS
FEATURE MENU
CHANNEL
MEMORY
CABLE
TUNING
AUTO-PROGRAMMING
CHANNEL MEMORY
1 2 3 4 5 6 7 8 9 1O 11 12
13 14 15 16 17 18 19 20 21 22 23 24
MAIN MENU
PICTURE
FEATURES
SOUND
HELP
EXIT
EXIT
ADD/DELETE CHANNELS
START AUTO-PROGRAMMING
CHANNEL MEMORY
HELP
STOP
REW
§§
FF
©©
PLAY
©
REC
STATUS
VOL
CH
1
2
3
4
5
6
7
8
9
0
ON/OFF
TV /VCR
VCR
ACC
TV
SWAP
FREEZE
POS
SIZE
ENTER
M
E
N
U
M
CLEAR
~
!
SURF
MUTE
PAUSE II
SLEEP
SMART
100+
POWER
M
O D E
1
1
3
2
1ST TIME SETUP
N
OTE: If you went through First
Time Setup (in your Quick Use Guide), this task has already been completed for you.
Your TV can automatically set itself for local area (or Cable TV) chan­nels. This makes it easy for you to select only the TV stations in your area when the CHANNEL
▲▼
but-
tons are pressed.
Select CHANNEL MEMORY
(START AUTO-PROGRAM-
MING) control.
With the FEATURES MENU on screen, move the RED highlight with the MENU buttons. Then press
the MENU (M) button.
Press the MENU button to turn
AUTO-PROGRAMMING ON .
The TV shows which channel num­bers are "SAVED" (U) as they are added into memory.
"Auto-programming CHANNEL MEMORY is finished" shows when the TV is through adding channels.
Press the STATUS or Menu (M)
button to clear the screen.
CHANNEL MEMORY
AUTO-PROGRAMMING
STOP
1
2
3
FEATURE MENU CONTROLS (CONTINUED)
U Channel Numbers are Saved in Memory
BEGIN
SMART HELP
Try it out. Press the
CHANNEL▲▼ buttons and
see which channels you can select. Remember. An Antenna or Cable TV
signal must first be connected to your TV so that channels can be saved.
If you want to delete any unwanted channels from the TV's memory, see "ADD/DELETE CHANNELS" on the next page.
12
EXIT
1 OF 5
PICTURE
SOURCE
MORE...
CLOSED
CAPTIONS
FEATURE MENU
CHANNEL
MEMORY
CABLE
TUNING
MAIN MENU
PICTURE
FEATURES
SOUND
HELP
EXIT
EXIT
ADD/DELETE CHANNELS
START AUTO-PROGRAMMING
CHANNEL MEMORY
HELP
ADD/DELETE CHANNEL
Channel 19 Added
to DELETE CHANNEL
when FINISHED
CHOOSE CHANNEL
M
STOP
REW
§§
FF
©©
PLAY
©
REC
STATUS
VOL
CH
1
2
3
4
5
6
7
8
9
0
ON/OFF
TV /VCR
VCR
ACC
TV
SWAP
FREEZE
POS
SIZE
ENTER
M
E
N
U
M
CLEAR
~
!
SURF
MUTE
PAUSE II
SLEEP
SMART
100+
POWER
M
O D E
1
1
4
2
3
1ST TIME SETUP
FEATURE MENU CONTROLS (CONTINUED)
A
uto-Programming (see previous
page) adds all the channels it can find (on your Antenna or Cable TV system) into the TV's memory. Add/Delete Channels makes it easy for you to add other channels, or drop unwanted channels, from the list of channels in the TV's memory.
Select CHANNEL MEMORY
(ADD/DELETE CHANNELS)
control. With the FEATURES MENU on
screen, move the RED highlight with the MENU buttons. Then
press the MENU (M) button.
Press the CHANNEL ▲▼ or
number buttons
to select the chan-
nel you want to add or delete.
Press the MENU © button to
ADD the channel into the TV's memory.
Press the MENU
§ button to
DELETE the channel from memory. Repeat steps 2 and 3 for each chan-
nel you wish to add or delete.
Press the STATUS or MENU
button to clear the screen.
ADD/DELETE CHANNELS
STOP
1
2
3
4
SMART HELP
Remember. You can also
add the AUX 1 VIDEO, AUX 2 VIDEO, or AUX 1 Y PB PR, modes just like a channel. Then by pressing the CHANNEL ▲▼ buttons the AUX(iliary)
mode can quickly be selected to use the desired set of Input jacks (see page 28).
Note: AUX(iliary) VIDEO modes are located between the lowest and highest channel numbers within the ADD/DELETE CHAN­NEL control screen.
BEGIN
13
MAIN MENU
PICTURE
FEATURES
SOUND
HELP
EXIT
EXIT
1 OF 5
PICTURE SOURCE
MORE...
CLOSED
CAPTIONS
FEATURE MENU
EXIT
2 OF 5
MORE...
HALF HOUR
REMINDER
FEATURE MENU
CHANNEL
MEMORY
CABLE
TUNING
CHANNEL
DISPLAY
SLEEP TIMER
EXIT
SET CLOCK
SET CLOCK & ALARM TIMER
9 : 19 AM
SET CLOCK
PLEASE ENTER THE
CURRENT HOUR
STOP
REW
§§
FF
©©
PLAY
©
REC
STATUS
VOL
CH
1
2
3
4
5
6
7
8
9
0
ON/OFF
TV /VCR
VCR
ACC
TV
SWAP
FREEZE
POS
SIZE
ENTER
M
E
N
U
M
CLEAR
~
!
SURF
MUTE
PAUSE II
SLEEP
SMART
100+
POWER
M
O D E
1
1
3
2
1ST TIME SETUP
SET CLOCK &
ALARM TIMER
SET ALARM TIMER
SET CLOCK
N
OTE: If you went through
First Time Setup (in your Quick Use Guide), this task has already been completed for you.
Your TV comes with an on-screen clock. During normal operation the clock appears on the screen with every channel change (and when the STATUS button is pressed).
Select SET CLOCK control.
With FEATURES MENU (2 of 5) on screen, move the RED highlight with the MENU buttons. Then
press the MENU (M) button.
Press the remote's number
buttons to set the time clock.
The remote's MENU buttons can also be used to set the hours, minutes and AM/PM portions of the clock.
Press the STATUS button to
set the clock in operation and clear
the screen.
STOP
1
2
3
BEGIN
FEATURE MENU CONTROLS (CONTINUED)
14
Remember, be sure to press "0" first and then the hour number for single digit entries.
TV Clock settings may be lost when the TV is unplugged (or AC power to the set is interrupted).
SMART
HELP
MAIN MENU
PICTURE
FEATURES
SOUND
HELP
EXIT
EXIT
1 OF 5
PICTURE SOURCE
MORE...
CLOSED
CAPTIONS
FEATURE MENU
CHANNEL
MEMORY
CABLE
TUNING
EXIT
2 OF 5
MORE...
HALF HOUR REMINDER
FEATURE MENU
CHANNEL
DISPLAY
SLEEP TIMER
STOP
REW
§§
FF
©©
PLAY
©
REC
STATUS
VOL
CH
1
2
3
4
5
6
7
8
9
0
ON/OFF
TV /VCR
VCR
ACC
TV
SWAP
FREEZE
POS
SIZE
ENTER
M
E
N
U
M
CLEAR
~
!
SURF
MUTE
PAUSE II
SLEEP
SMART
100+
POWER
M
O D E
1
1
3
2
2
1ST TIME SETUP
SET CLOCK &
ALARM TIMER
HALF HOUR REMINDER
HELP
EXIT
OFF
EVERY HALF HOUR
W
ith the Half Hour Reminder
control the TV automatically shows you the current time and channel every thirty minutes.
Select HALF HOUR
REMINDER control.
With FEATURES MENU (2 of 5) on screen, move the RED high­light with the MENU buttons.
Then press the MENU (M) button.
Press the MENU ▲▼ and
MENU (M) buttons to highlight
and select (U) the EVERY HALF HOUR item.
Press the STATUS button to
clear the screen.
HALF HOUR REMINDER
STOP
1
2
3
BEGIN
Remember, the Time and Channel Reminders will show on the hour and the half­hour for several sec­onds.
SMART
HELP
FEATURE MENU CONTROLS (CONTINUED)
MAIN MENU
PICTURE
FEATURES
SOUND
HELP
EXIT
EXIT
1 OF 5
PICTURE
SOURCE
MORE...
CLOSED
CAPTIONS
FEATURE MENU
CHANNEL MEMORY
CABLE TUNING
EXIT
2 OF 5
MORE...
HALF HOUR
REMINDER
FEATURE MENU
CHANNEL
DISPLAY
SLEEP TIMER
7 : 30 AM
PLEASE ENTER THE HOUR TO TURN ON
EXIT
SET CLOCK
HELP
EXIT
ON OFF
STOP
REW
§§
FF
©©
PLAY
©
REC
STATUS
VOL
CH
1
2
3
4
5
6
7
8
9
0
ON/OFF
TV/VCR
VCR
ACC
TV
SWAP
FREEZE
POS
SIZE
ENTER
M
E
N
U
M
CLEAR
~
!
SURF
MUTE
PAUSE II
SLEEP
SMART
100+
POWER
M
O D E
1
1
5
4
2
2
1ST TIME SETUP
SET CLOCK &
ALARM TIMER
SET CLOCK & ALARM TIMER
SET ALARM TIMER
SET ALARM TIMER
SET ALARM TIME
SET ALARM TIME
J
ust like an alarm clock you can set the TV to turn itself on at the
same time everyday.
Select SET ALARM TIMER
control. With FEATURES MENU (2 of 5)
on screen, move the RED highlight with the MENU (M) buttons.
Then press the MENU button.
Press the MENU ▲▼ and
MENU (M) buttons to highlight
and select "ON" (U).
Press the MENU ▲▼ and
then the MENU (M) buttons to
select "SET ALARM TIME".
Press the remote's number
buttons to set the "TURN ON"
time for the TV. (Press MENU ▲ ▼ for AM or PM.)
Press the STATUS button to
set the "ALARM TIME" and clear the screen.
SET ALARM TIMER
STOP
1
2
3
BEGIN
4
5
STOP
REW
§§
FF
©©
PLAY
©
REC
STATUS
VOL
CH
1
2
3
4
5
6
7
8
9
0
ON/OFF
TV /VCR
VCR
ACC
TV
SWAP
FREEZE
POS
SIZE
ENTER
M
E
N
U
M
CLEAR
~
!
SURF
MUTE
PAUSE II
SLEEP
SMART
100+
POWER
M
O D E
3
2
1
1 : 15
Press SLEEP to CHANGE
SET SLEEP TIMER
H
ave you ever fallen asleep in
front of the TV only to have it wake you up at two in the morning with a test pattern screeching in your ears? Well, your TV can save you all that trouble by automatical­ly turning itself off.
Press the SLEEP button on the
remote control. Note: you can also select the
SLEEP control with the TV’s on­screen FEATURES MENU (2 of 5). Move the RED highlight with the MENU (M) buttons. Then press
the MENU button.
Press the SLEEP button repeat-
edly to pick the amount of time (15 minutes to 2 hours ahead) before the TV will turn itself off.
The (+), (-) buttons can also be used to set the amount of time.
Press the STATUS or MENU
(M) button to clear the screen after
you have set the time for the TV to turn off.
1
2
3
STOP
Remember, to see how many minutes are left before the TV shuts itself off, reselect the SLEEP TIMER control screen.
To stop a SLEEP TIMER setting, reset the timer back to OFF. (Turning the TV off and on, or pressing a button during the last minute of a timer setting, will also cancel a setting.)
A few seconds before the TV is to shut off a message will come on the screen telling you
GOOD NIGHT.
SMART
HELP
BEGIN
SLEEP TIMER
15
FEATURE MENU CONTROLS (CONTINUED)
MAIN MENU
PICTURE
FEATURES
SOUND
HELP
EXIT
EXIT
1 OF 3
PICTURE SOURCE
MORE...
CLOSED
CAPTIONS
FEATURE MENU
CHANNEL MEMORY
CABLE
TUNING
EXIT
2 OF 3
MORE...
HALF HOUR
REMINDER
FEATURE MENU
CHANNEL
DISPLAY
SLEEP TIMER
ACCESS CODE SETUP
X X X X
to EXIT
First Enter Your Current Access Code.
M
ACCESS CODE SETUP
to EXIT
TRY AGAIN. If You've Forgotten Your Access Code go to SETUP CODE and see Owner's Manual.
M
X X X X
INCORRECT ACCESS CODE
ACCESS CODE SETUP
to EXIT
Access Code Changed.
M
X X X X
for CHANNEL BLOCKING
ACCESS CODE SETUP
to EXIT
Next Enter Your New Access Code.
M
X X X X
STOP
REW
§§
FF
©©
PLAY
©
REC
STATUS
VOL
CH
1
2
3
4
5
6
7
8
9
0
ON/OFF
TV /VCR
VCR
ACC
TV
SWAP
FREEZE
POS
SIZE
ENTER
M
E
N
U
M
CLEAR
~
!
SURF
MUTE
PAUSE II
SLEEP
SMART
100+
POWER
M
O D E
1
2
1
2
5
3
4
1ST TIME SETUP
SET CLOCK &
ALARM TIMER
EXIT
3 OF 5
FEATURE MENU
LANGUAGE SELECTION
MORE...
MORE...
PARENTAL
CONTROL
PARENTAL CONTROL
HELP
EXIT
CHANNEL
BLOCKING
SETUP
CODE
CONTENT
ADVISORY
for CONTENT ADVISORY
PARENTAL CONTROL
SETUP CODE NUMBER
P
arental Control allows parents
to block out, or "censor", any channels they think children should not watch. A channel placed under Parental Control cannot be viewed until a correct access code is used to unlock the channel for viewing.
First let's set your Parental Code:
Select the PARENTAL CON-
TROL.
With FEATURES MENU (3 of 5) on screen, move the RED highlight with the MENU buttons. Then
press the MENU (M) button.
Press the MENU ▲▼ and
MENU (M) buttons to highlight
and select the SETUP CODE item.
Press 0, 7, 1, 1 on the remote.
"XXXX" shows on the ACCESS
CODE SETUP screen as you press the number buttons.
"INCORRECT ACCESS CODE ­TRY AGAIN" will also show on the screen.
Press 0, 7, 1, 1 on the remote
again.
"Next Enter Your New Access Code" shows on the screen.
Enter a new four digit number
code using the remote.
"Access Code Changed" shows on
the screen to let you know the new code has been set.
Continue to the next page to find out how to "BLOCK" channels from viewing.
1
2
3
4
5
BEGIN
• Press MENU © to go on and start
to "block" channels.
• Press MENU § to go to "Content
Advisory" (or TV and Movie Ratings system of channel blocking).
• Press MENU to return to the Parental
Control Menu screen.
• Press STATUS to clear the screen.
SMART HELP
Note to Parents - it isn't
possible to unlock or defeat your Censor Access Code without changing to a new code number. So if your Code number changes, and you didn't change it yourself, then you will know that someone has altered the code and the blanked out channel has been viewed.
NOTE:Your TV left the factory with the Parental Code set to "0000". If you are using your TV and the Parental Control for the first time, and don't want to SETUP a new Access code number, you can use the "0000" number to block channels - see next page. The "0711" Parental Code (shown on this page) is given as a default or way to reset the Code when the current Access number is not known.
16
Loading...
+ 36 hidden pages