Philips 872790092626200 User Manual

Philips LivingWhites
Spiral energy saving bulb

• 20 W (88 W)

•Normal cap

•Warm white

LivingWhites

872790092626200

Create the light for the moment

Integrate your present home lighting into the world of LivingAmbiance. Just by replacing
the bulb you can make your luminaires dimmable with the LivingAmbiance / LivingWhites
remote control. Plus, these Philips lamps save energy and money.

Personal scene setting

• Dimming creates a cosy atmosphere

Long-lasting

•8 years lifetime

Add your current luminaires to LivingAmbiance

• Connect any white light luminaire to a LivingAmbiance remote

• Dimming without a wall dimmer

Experiment with lights to create your ambiance

• Adjust each light individually, or in any combination

• Control this and other SmartLink lights with one remote

Spiral energy saving bulb

20 W (88 W) Normal cap, Warm white

872790092626200

Highlights

Dimming creates atmosphere

Multiple lights in a room let the room appear more
vivid as this emphasizes different corners and sides.
By dimming these lights, you can create atmospheres
from cosy to vibrant.

8 years lifetime

Energy saving lamps have a longer lifetime than
standard bulbs. With these 8 years lifetime, one
energy saver replaces 8 standard bulbs. So they save
money and last longer, year after year. The lifetime
is based on the average usage of 2,7 hrs per day or

1.000 hrs a year. This average is influenced by the
usage during different seasons (dark winter vs light
summer), the weather conditions (sunny vs rainy
dark day) and on the room where the lamp is used
(short usage in bathroom vs long usage in living
room).

Connect to LivingAmbiance

Plug the LivingWhites luminaire control plug
between your luminaire and the wall socket, and the
luminaire will work with other LivingAmbiance
products. This allows you to control a luminaire you
already have at home with a LivingAmbiance remote
control, and to connect it to other LivingAmbiance
products. You can now make your own luminaire
part of the scene! Attention: the luminaire you
connect to the LivingWhites plug should not have a
touch dimmer.

Adjust one light or all

When connected to other Philips LivingAmbiance
products, you can change color, dim or adjust
intensity of colored light luminaires and dim white
light luminaires.

One remote for all lights

Specifications

Technical specifications

• Power factor: 0,6

• Starting time: 1 s

• Mercury content: 4 mg

• Lifetime of lamp: 8 year(s)

• Rated lifetime: 8 year(s)

• Rated power: 20 W

• Wattage: 20 W

• Lamp dimension (width): 61 mm

• Color rendering index (CRI): 82

• Wattage equivalent: 88 W

• Lamp dimension (height): 131 mm

• Lamp current: 145 mA

• Lumen: 1200

• Rated luminous flux: 1200 lm

• Color temperature: 2700 K

• Lifetime of lamp: 8000 hour(s)

• Rated lifetime: 8000 hour(s)

• Number of switch cycles: 20000

• Lumen maintenance factor: 0.7 (at the end of the
nominal lif

• Voltage: 230-240 V

• Warm up time 60% light output: 5 - 30 s

• Energy efficiency label: A

• Fitting/Cap: E27

• Shape: Spiral

• Color: Warm White

• Light effect / finish: White

• Dimmable

• Wattage standard bulb: 88 W

etime) %

Dimming without a wall dimmer

You can dim the LivingWhites bulb with either a
LivingWhites or a LivingAmbiance remote control.
Any Philips remote control that has the SmartLink
label will work to dim this bulb.

All of the LivingAmbiance products work together
via the same intuitive remote control, with which
you can dim or change the colour of your lights –
individually or together – in any combination you
please. You can recognize which products work
together by looking at the box or the product itself.
If there is a SmartLink logo, it means the product will
work with other SmartLink products.

Cleaning by breakage/disposal

• Cleaning: Follow the advice for proper clean up*

• Disposal: Follow the instruction for disposal as

pecial waste**

s

•

Issue date 2013-06-04

Version: 4.0.1

12 NC: 9296 896 77302
EAN: 87 27900 92626 2

© 2013 Koninklijke Philips N.V.
All Rights reserved.

Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips N.V.
or their respective owners.

www.philips.com

* Breaking a lamp is extremely unlikely to have any impact on your

health. If a lamp brakes, ventilate the room for 30 minutes and
remove the parts, preferably with gloves. Put them in a closed plastic
bag and offer it to the local waste facilities for recycling. Do not use
a vacuum cleaner.

* * Compact fluorescent lamps have to be treated as special waste,

they must be offered to the local waste facilities for recycling. The
European Lighting Industry has set up an infrastructure, capable of
recycling mercury, other metals, glass, etc.