Philips 8718696710937 User Manual

Philips LED
Spot

1.5-3.5-5 W (5-20-50 W)

GU10
Non-dimmable

8718696710937

Switch light settings without switching bulbs

Works with your existing switch

Sometimes you feel like a change in ambience to suit whatever you're doing. With a
Philips SceneSwitch LED spot, you can easily change the setting with your existing switch.
No dimmer or additional installation is required.

Choose for high-quality light

• Learn about light

Light beyond illumination

• Three light settings from 2700 K to 2500 K to 2200 K

• The lamp can memorise your last setting

• Restore the lamp to the default factory setting

Choose a simple replacement for your old bulbs

•No UV or Infrared

Choose for a sustainable solution

• Long-life bulbs - Lasts up to 15 years

• Better for your wallet and your planet

Create the right light for your home

• Perfect for accent lighting

8718696710937

Spot

1.5-3.5-5 W (5-20-50 W) GU10, Non-dimmable

Highlights

Three light settings

Light can have different colour temperatures,
in

dicated in units called Kelvin (K). Bulbs with
a low Kelvin value produce a warm, cosy light,
while those with a higher Kelvin value produce
a more energising light. These new Scene
Switch bulbs allow you to switch from
functional lighting to natural light and to a cosy,
warm dimmed light. Light levels can changes
from 100% to 40% to 10%. Now you can easily
customise your room for a variety of tasks or
adapt it to suit your mood.

Reset (Sceneswitch)

15,000-hour rated average life

With a lifetime of up to 15,000 hours, you can
reduce the hassle of frequently replacing your
light bulbs and enjoy a perfect lighting solution
for over 15 years.

Saves up to 80% energy

for both accent lighting and general purpose
lighting. It can be used in recessed cans and
track light fixtures, and is ideal for use in
kitchens, kitchen island lighting, living rooms
and dining rooms.

No UV or IR

The light has no infrared component, so no
heat is radiated. Also, there is no ultraviolet
component in this light. These two
characteristics mean that this light will not
cause fabric and other items to fade.

If multiple lamps are used and they are no
longer synchronised, simply toggle the switch
(turn it on and off again within 1 second) to
restore the lamps to the default factory setting.

Auto memory (sceneswitch)

This Scene Switch lamp has a built-in memory
chip which will memorise your last light setting
if the switch is turned off for longer than 6
seconds. If you don't often switch between
activities, the light will be in your favourite
mode when you turn it on again.

LED technology saves up to 80% energy
compared to your standard bulb. It therefore
pays for itself and saves you money year after
year. It also helps to protect the environment.

Perfect for accent lighting

Modern lighting with a familiar wide-angle light
output (36 degrees), this LED spot is suitable

Learn about light

Colour temperature: Light can have different
colour temperatures, indicated in units called
Kelvin (K). Bulbs with a low Kelvin value
produce a warm, more tranquil light, while
those with a higher Kelvin value produce a
cool, more energising light. CRI: The colour
rendering index (CRI) is used to describe the
effect of a light source on colour appearance.
Natural sunlight has a CRI of 100. The CRI of
Philips LED light bulbs is always higher than 80,
which ensures that colours are shown as true
and natural.