Philips 8718696598474 User Manual

Philips LED Candle

5.5 W–4 W–2 W (40 W)

E14 Warm white Clear

One candle, three light settings

Works with your existing switch

Sometimes you feel like a change in ambiance to suit whatever you're doing. With a Philips SceneSwitch LED bulb, you can easily change the setting from a bright light, to a natural light, to a cosy warm glow. No dimmer is required.

Objects are seen in their true, natural colours

• High colour rendering (CRI > 80) for vivid colours

Auto memory

• The lamp can memorise your last setting

• Restore the lamp to the default factory setting

Simply plug and play

• No dimmer or additional installation needed

• Three light settings from 2700 K to 2500 K to 2200 K

Save on energy

• Saves up to 80% energy

8718696598474

Candle

5.5 W–4 W–2 W (40 W) E14, Warm white, Clear

Highlights

Auto memory (sceneswitch)

This Scene Switch lamp has a built-in memory chip which will memorise your last light setting if the switch is turned off for longer than 6 seconds. If you don't often switch between activities, the light will be in your favourite mode when you turn it on again.

High colour rendering (CRI>80)

The colour rendering index (CRI) is used to describe the effect of a light source on colour appearance. Natural outdoor light has a CRI of 100 and is used as the standard of comparison for any other light source. The CRI of Philips LED light bulbs is always higher than 80, close to the sun's value, reflecting colours truly and naturally.

Plug and play

Delivers a variety of great light scenes straight out of the box to suit your different needs and moods. The intelligence is in the bulb itself, so no dimmer or other additional installation is required. Simply replace your bulb with this Scene Switch bulb, and you can change between different scenes at a flick of your existing wall switch. Lowest level of investment and effort required to enjoy the highest level of comfort. Now you can change the ambience easily to

suit whatever you're doing and your mood at the time.

Reset (Sceneswitch)

If multiple lamps are used and they are no longer synchronised, simply toggle the switch (turn it on and off again within 1 second) to restore the lamps to the default factory setting.

Saves up to 80% energy

Save up to 80% energy compared to your standard bulb. It pays for itself and saves you money year after year. So reduce your energy bill and start saving now.

Three light settings

Light can have different colour temperatures, indicated in units called Kelvin (K). Bulbs with a low Kelvin value produce a warm, cosy light, while those with a higher Kelvin value produce a more energising light. These new Scene Switch bulbs allow you to switch from functional lighting to natural light and to a cosy, warm dimmed light. Light levels can changes from 100% to 40% to 10%. Now you can easily customise your room for a variety of tasks or adapt it to suit your mood.

Specifications

Bulb characteristics

• Shape: Candle

•Cap/fitting: E14

• Dimmable: No

• Voltage: 220–240 V

•Type: B38

Power consumption

• Wattage: 5.5W-4W-2W W

• Wattage equivalent: 40 W

• Energy efficiency label: A+

• Power consumption per 1000h: 5.5W-4W2W kW·h

Light characteristics

• Light output: 470-190-50 lumen

• Colour: Warm White

• Colour temperature: 2700-2500-2200 K

• Light effect/finish: Warm White

• Colour rendering index (CRI): 80

• Starting time: < 0.5 s

Durability

• Lifetime of lamp: 15,000 hour(s)

• Number of switch cycles: 100000

• Lumen maintenance factor: 0.7

• Average life (at 2.7 hrs/day): 15 year(s)

Bulb dimensions

• Height: 113 mm

• Width: 38 mm

Other characteristics

• Lamp current: 50 mA

• Range: SceneSwitch

•

Issue date 2016-08-09

Version: 1.0.1

12 NC: 9290 012 60801

Specifications are subject to change without notice. Trademarks are the property of Philips Lighting Holding B.V. or their respective owners.

www.philips.com