Philips 74hc hct9115 DATASHEETS
INTEGRATED CIRCUITS
DATA SH EET
For a complete data sheet, please also download:
•The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications
•The IC06 74HC/HCT/HCU/HCMOS Logic Package Information
•The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines
74HC/HCT9115
Nine wide Schmitt trigger buffer;
open drain outputs
Product specification
Supersedes data of March 1988
File under Integrated Circuits, IC06
December 1990
Philips Semiconductors Product specification
Nine wide Schmitt trigger buffer;
open drain outputs
FEATURES
• Schmitt trigger action on all data inputs
• Output capability: standard (open drain)
• ICCcategory: MSI
GENERAL DESCRIPTION
The 74HC/HCT9115 are high-speed Si-gate CMOS
devices and are pin compatible with low power Schottky
TTL (LSTTL). They are specified in compliance with
JEDEC standard no. 7A.
The 74HC/HCT9115 are nine wide Schmitt trigger buffer
with open drain outputs and Schmitt trigger inputs.
QUICK REFERENCE DATA
GND = 0 V; T
=25°C; tr=tf= 6 ns
amb
SYMBOL PARAMETER CONDITIONS
t
PHL
C
C
I
PD
/ t
PLZ
propagation delay Anto Y
n
input capacitance 3.5 3.5 pF
power dissipation capacitance per buffer notes 1 and 2 5 5 pF
The Schmitt trigger action in the data inputs transform
slowly changing input signals into sharply defined
jitter-free output signals.
The 74HC/HCT9115 have open-drain N-transistor
outputs, which are not clamped by a diode connected to
. In the OFF-state, i.e. when one input is HIGH, the
V
CC
output may be pulled to any voltage between GND and
V
. This allows the device to be used as a
Omax
LOW-to-HIGH or HIGH-to-LOW level shifter. For digital
operation and OR-tied output applications, these devices
must have a pull-up resistor to establish a logic HIGH level.
The “9115” is identical to the “9114” but has non-inverting
outputs.
CL= 15 pF; VCC= 5 V 12 13 ns
74HC/HCT9115
TYPICAL
UNIT
HC HCT
Notes
1. C
is used to determine the dynamic power dissipation (PDin µW):
PD
PD=CPD× V
2
× fi+∑(CL× V
CC
2
× fo) where:
CC
fi= input frequency in MHz
fo= output frequency in MHz
∑ (CL× V
2
× fo) = sum of outputs
CC
CL= output load capacitance in pF
VCC= supply voltage in V
2. For HC the condition is VI= GND to V
CC
For HCT the condition is VI= GND to VCC− 1.5 V
ORDERING INFORMATION
“74HC/HCT/HCU/HCMOS Logic Package Information”
See
.
December 1990 2
Philips Semiconductors Product specification
Nine wide Schmitt trigger buffer;
open drain outputs
PIN DESCRIPTION
PIN NO. SYMBOL NAME AND FUNCTION
1, 2, 3, 4, 5, 6, 7, 8, 9 A
10 GND ground (0 V)
19, 18, 17, 16, 15, 14, 13, 12, 11 Y
20 V
lfpage
0
0
CC
to A
to Y
8
8
data inputs
data outputs
positive supply voltage
A
0
1
A
1
2
A
2
3
Y
0
19
Y
1
18
Y
2
17
page
74HC/HCT9115
1
218
3
19
17
A
3
4
A
4
5
A
5
6
A
6
7
A
7
8
A
8
9
Y
Y
Y
Y
Y
Y
MBA016
3
16
4
15
5
14
6
13
7
12
8
11
Fig.1 Pin configuration. Fig.2 Logic diagram.
4
5
6
7
8
9
MBA013
Fig.3 IEC logic diagram.
16
15
14
13
12
11
December 1990 3
Loading...