Philips 74hc hct42 DATASHEETS

INTEGRATED CIRCUITS

DATA SH EET

For a complete data sheet, please also download:

•The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications

•The IC06 74HC/HCT/HCU/HCMOS Logic Package Information

•The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines

74HC/HCT42

BCD to decimal decoder (1-of-10)

Product specification
File under Integrated Circuits, IC06

December 1990

Philips Semiconductors Product specification

BCD to decimal decoder (1-of-10) 74HC/HCT42

FEATURES

• Mutually exclusive outputs

• 1-of-8 demultiplexing capability

• Outputs disabled for input codes above nine

• Output capability: standard

• ICC category: MSI

The 74HC/HCT42 decoders accept four active HIGH BCD
inputs and provide 10 mutually exclusive active LOW
outputs. The active LOW outputs facilitate addressing
other MSI circuits with active LOW input enables.

The logic design of the “42” ensures that all outputs are
HIGH when binary codes greater than nine are applied to
the inputs.

The most significant input (A

GENERAL DESCRIPTION

function when the “42” is used as a 1-of-8 decoder. The A
input can also be used as the data input in an 8-output

The 74HC/HCT42 are high-speed Si-gate CMOS devices

demultiplexer application.

and are pin compatible with low power Schottky TTL
(LSTTL). They are specified in compliance with JEDEC
standard no. 7A.

QUICK REFERENCE DATA

GND = 0 V; T

=25°C; tr=tf= 6 ns

amb

SYMBOL PARAMETER CONDITIONS

t

PHL

C
C

I
PD

/ t

PLH

propagation delay Anto Y

n

CL= 15 pF; VCC= 5 V 14 17 ns
input capacitance 3.5 3.5 pF
power dissipation capacitance per package notes 1 and 2 37 37 pF

) produces an useful inhibit

3

TYPICAL

UNIT

HC HCT

3

Notes

1. C

is used to determine the dynamic power dissipation (PD in µW):

PD

PD=CPD × V

2

× fi+∑(CL× V

CC

2

× fo) where:

CC

fi= input frequency in MHz
fo= output frequency in MHz
∑ (CL× V

2

× fo) = sum of outputs

CC

CL= output load capacitance in pF
VCC= supply voltage in V

2. For HC the condition is VI= GND to V

CC

For HCT the condition is VI= GND to VCC− 1.5 V

ORDERING INFORMATION

“74HC/HCT/HCU/HCMOS Logic Package Information”

See

.

December 1990 2