Philips 74hc hct40105 DATASHEETS

INTEGRATED CIRCUITS

DATA SH EET

For a complete data sheet, please also download:

•The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications

74HC/HCT40105

4-bit x 16-word FIFO register

Product specification
Supersedes data of December 1990
File under Integrated Circuits, IC06

1998 Jan 23

Philips Semiconductors Product specification

4-bit x 16-word FIFO register 74HC/HCT40105

FEATURES

• Independent asynchronous inputs and outputs

• Expandable in either direction

• Reset capability

• Status indicators on inputs and outputs

• 3-state outputs

• Output capability: standard

• ICCcategory: MSI

GENERAL DESCRIPTION

The 74HC/HCT40105 are high-speed Si-gate CMOS
devices and are pin compatible with the “40105” of the
“4000B” series. They are specified in compliance with
JEDEC standard no. 7A.

The 74HC/HCT40105 are first-in/first-out (FIFO) “elastic”
storage registers that can store sixteen 4-bit words. The
“40105” is capable of handling input and output data at

QUICK REFERENCE DATA

GND = 0 V; T

= 25 °C; tr= tf= 6 ns

amb

different shifting rates. This feature makes it particularly
useful as a buffer between asynchronous systems. Each
word position in the register is clocked by a control flip-flop,
which stores a marker bit. A “1” signifies that the position’s
data is filled and a “0” denotes a vacancy in that position.
The control flip-flop detects the state of the preceding
flip-flop and communicates its own status to the
succeeding flip-flop. When a control flip-flop is in the “0”
state and sees a “1” in the preceding flip-flop, it generates
a clock pulse that transfers data from the preceding four
data latches into its own four data latches and resets the
preceding flip-flop to “0”. The first and last control flip-flops
have buffered outputs. Since all empty locations “bubble”
automatically to the input end, and all valid data ripples
through to the output end, the status of the first control
flip-flop (data-in ready output - DIR) indicates if the FIFO is
full, and the status of the last flip-flop (data-out ready
output - DOR) indicates if the FIFO contains data. As the
earliest data is removed from the bottom of the data stack
(output end), all data entered later will automatically ripple
toward the output.

SYMBOL PARAMETER CONDITIONS

t

PHL

/ t

PLH

propagation delay CL= 15 pF; VCC=5 V

MR to DIR, DOR 16 15 ns

t

PHL

SO to Q

propagation delay

n

SI to DIR 16 18 ns
SO to DOR 17 18 ns

f

max

C
C

I
PD

maximum clock frequency 33 31 MHz
input capacitance 3.5 3.5 pF
power dissipation capacitance per package notes 1 and 2 134 145 pF

Notes

1. C

is used to determine the dynamic power dissipation (PDin µW):

PD

PD= CPD× V

2

× fi+∑(CL× V

CC

2

× fo) where:

CC

fi= input frequency in MHz.
fo= output frequency in MHz.
∑ (CL× V

2

× fo) = sum of outputs

CC

CL= output load capacitance in pF
VCC= supply voltage in V

2. For HC the condition is VI= GND to V

CC

For HCT the condition is VI= GND to VCC− 1.5

TYP.

UNIT

HC HCT

37 35 ns

1998 Jan 23 2

Philips Semiconductors Product specification

4-bit x 16-word FIFO register 74HC/HCT40105

ORDERING INFORMATION

TYPE NUMBER

PACKAGE

NAME DESCRIPTION VERSION

74HC(T)40105N DIP16 plastic dual in-line package; 16 leads (300 mil); long body SOT38-1
74HC(T)40105D SO16 plastic small outline package; 16 leads; body width 3.9 mm SOT109-1
74HC(T)40105DB SSOP16 plastic shrink small outline package; 16 leads; body width 5.3 mm SOT338-1
74HC(T)40105PW TSSOP16 plastic thin shrink small outline package; 16 leads; body width 4.4 mm SOT403-1

PIN DESCRIPTION

PIN NO. SYMBOL NAME AND FUNCTION

1

OE output enable input (active LOW)
2 DIR data-in ready output
3 SI shift-in input (LOW-to-HIGH, edge-triggered)
4, 5, 6, 7 D

0

to D

3

parallel data inputs
8 GND ground (0 V)
9 MR asynchronous master reset input (active HIGH)
13, 12, 11, 10 Q

0

to Q

3

3-state data outputs
14 DOR data-out ready output
15
16 V

SO shift-out input (HIGH-to-LOW, edge-triggered)

CC

positive supply voltage

Fig.1 Pin configuration. Fig.2 Logic symbol. Fig.3 IEC logic symbol.

1998 Jan 23 3

Philips Semiconductors Product specification

4-bit x 16-word FIFO register 74HC/HCT40105

INPUT AND OUTPUTS
Data inputs (D

to D3)

0

As there is no weighting of the inputs,
any input can be assigned as the
MSB. The size of the FIFO memory
can be reduced from the 4 × 16
configuration, i.e. 3 × 16, down to
1 × 16, by tying unused data input
pins to V

Data outputs (Q

or GND.

CC

to Q3)

0

As there is no weighting of the
outputs, any output can be assigned
as the MSB. The size of the FIFO
memory can be reduced from the
4 × 16 configuration as described for
data inputs. In a reduced format, the
unused data outputs pins must be left
open circuit.

Master-reset (MR)

When MR is HIGH, the control
functions within the FIFO are cleared,
and date content is declared invalid.
The data-in ready (DIR) flag is set
HIGH and the data-out-ready (DOR)
flag is set LOW. The output stage
remains in the state of the last word
that was shifted out, or in the random
state existing at power-up.

Status flag outputs (DIR, DOR)

Indication of the status of the FIFO is
given by two status flags,
data-in-ready (DIR) and
data-out-ready (DOR):

DIR = HIGH indicates the input stage
is empty and ready to accept valid
data;

DIR = LOW indicates that the FIFO is
full or that a previous shift-in
operation is not complete (busy);

DOR = HIGH assures valid data is
present at the outputs Q

to Q3(does

0

not indicate that new data is awaiting
transfer into the output stage);

DOR = LOW indicates the output
stage is busy or there is no valid data.

Shift-in control (SI)

Data is loaded into the input stage on
a LOW-to-HIGH transition of SI.
It also triggers an automatic data
transfer process (ripple through). If SI
is held HIGH during reset, data will be
loaded at the falling edge of the MR
signal.

Shift-out control (

SO)

A HIGH-to-LOW transition of
SO causes the DOR flags to go LOW.
A HIGH-to-LOW transition of
SO causes upstream data to move
into the output stage, and empty
locations to move towards the input
stage (bubble-up).

Output enable (

OE)

The outputs Q0to Q3are enabled
when OE = LOW. When OE = HIGH
the outputs are in the high impedance
OFF-state.

FUNCTIONAL DESCRIPTION
Data input

Following power-up, the master-reset
(MR) input is pulsed HIGH to clear the
FIFO memory (see Fig.8). The
data-in-ready flag (DIR = HIGH)
indicates that the FIFO input stage is
empty and ready to receive data.
When DIR is valid (HIGH), data
present at D

to D3can be shifted-in

0

using the SI control input.
With SI = HIGH, data is shifted into
the input stage and a busy indication
is given by DIR going LOW.

The data remains at the first location
in the FIFO until DIR is set to HIGH
and data moves through the FIFO to
the output stage, or to the last empty
location. If the FIFO is not full after the
SI pulse, DIR again becomes valid
(HIGH) to indicate that space is
available in the FIFO. The DIR flag
remains LOW if the FIFO is full (see
Fig.6). The SI use must be made

LOW in order to complete the shift-in
process.

With the FIFO full, SI can be held
HIGH until a shift-out (

SO) pulse
occurs. Then, following a shift-out of
data, an empty location appears at
the FIFO input and DIR goes HIGH to
allow the next data to be shifted-in.
This remains at the first FIFO location
until SI goes LOW (see Fig.7).

Data transfer

After data has been transferred from
the input stage of the FIFO following
SI = LOW, data moves through the
FIFO asynchronously and is stacked
at the output end of the register.
Empty locations appear at the input
end of the FIFO as data moves
through the device.

Data output

The data-out-ready flag
(DOR = HIGH) indicates that there is
valid data at the output (Q

to Q3).

0

The initial master-reset at power-on
(MR = HIGH) sets DOR to LOW (see
Fig.8). After MR = LOW, data shifted
into the FIFO moves through to the
output stage causing DOR to go
HIGH.

As the DOR flag goes HIGH, data can
be shifted-out using the SO = HIGH,
data in the output stage is shifted out
and a busy indication is given by DOR
going LOW. When SO is made LOW,
data moves through the FIFO to fill
the output stage and an empty
location appears at the input stage.
When the output stage is filled DOR
goes HIGH, but if the last of the valid
data has been shifted-out leaving the
FIFO empty the DOR flag remains
LOW (see Fig.9). With the FIFO
empty, the last word that was
shifted-out is latched at the output
Q0to Q3.

With the FIFO empty, the SO input
can be held HIGH until the SI control
input is used. Following an SI pulse,

1998 Jan 23 4

Philips Semiconductors Product specification

4-bit x 16-word FIFO register 74HC/HCT40105

data moves through the FIFO to the
output stage, resulting in the DOR
flag pulsing HIGH and a shift-out of
data occurring. The SO control must
be made LOW before additional data
can be shifted-out (see Fig.10).

High-speed burst mode

If it is assumed that the
shift-in/shift-out pulses are not
applied until the respective status
flags are valid, it follows that the
shift-in/shift-out rates are determined
by the status flags. However, without
the status flags a high-speed burst
mode can be implemented. In this
mode, the burst-in/ burst-out rates are
determined by the pulse widths of the
shift-in/shift-out inputs and burst rates
of 35 MHz can be obtained. Shift

pulses can be applied without regard
to the status flags but shift-in pulses
that would overflow the storage
capacity of the FIFO are not allowed
(see Figs 11 and 12).

Expanded format

With the addition of a logic gate, the
FIFO is easily expanded to increase
word length (see Fig.17). The basic
operation and timing are identical to a
single FIFO, with the exception of an
additional gate delay on the flag
outputs. If during application, the
following occurs:

• SI is held HIGH when the FIFO is
empty, some additional logic is
required to produce a composite
DIR pulse (see Figs 7 and 18).

Due to the part-to-part spread of the
ripple through time, the SI signals of
FIFOAand FIFOBwill not always
coincide and the AND-gate will not
produce a composite flag signal. The
solution is given in Fig.18.

The “40105” is easily cascaded to
increase the word capacity and no
external components are needed. In
the cascaded configuration, all
necessary communications and
timing are performed by the FIFOs.
The intercommunication speed is
determined by the minimum flag
pulse widths and the flag delays. The
data rate of cascaded devices is
typically 25 MHz. Word-capacity can
be expanded to and beyond 32-words
× 4-bits (see Fig.19).

1998 Jan 23 5

Philips Semiconductors Product specification

4-bit x 16-word FIFO register 74HC/HCT40105

Fig.4 Functional diagram.

(see control flip-flops)
(1) LOW on S input of FF1, and FF5 will set Q output to HIGH independent of state on R input.
(2) LOW on R input of FF2, FF3 and FF4 will set Q output to LOW independent of state on S input.

Fig.5 Logic diagram.

1998 Jan 23 6

Philips Semiconductors Product specification

4-bit x 16-word FIFO register 74HC/HCT40105

DC CHARACTERISTICS FOR 74HC

For the DC characteristics see

“74HC/HCT/HCU/HCMOS Logic Family Specifications”

Output capability: standard
ICCcategory: MSI

AC CHARACTERISTICS FOR 74HC

GND = 0 V; t

= tf= 6 ns; CL= 50 pF

f

SYMBOL PARAMETER

t

PHL

/ t

propagation delay

PLH

MR to DIR, DOR

t

PHL

propagation delay

SI to DIR

t

PHL

propagation delay

SO to DOR

t

PHL

t

PLH

/ t

propagation delay

PLH

SO to Q

propagation delay/

n

ripple through delay
SI to DOR

t

PLH

propagation delay/

bubble-up delay
SO to DIR

t

PZH

t

PHZ

/ t

/ t

3-state output enable time

PZL

OE to Q

3-state output disable

PLZ

n

time

t

THL

t

W

OE to Q

/ t

output transition time 19 75 95 110 ns 2.0 Fig.14

TLH

SI pulse width

n

HIGH or LOW

.

T

amb

(°C)

TEST CONDITIONS

74HC

+25 −40 to +85 −40 to +125

UNIT

WAVEFORMS

V

CC

(V)

min. typ. max. min. max. min. max.

52 175 220 265 ns 2.0 Fig.8
19 35 44 53 4.5
15 30 37 45 6.0
52 210 265 315 ns 2.0 Fig.6
19 42 53 63 4.5
15 36 45 54 6.0
55 210 265 315 ns 2.0 Fig.9
20 42 53 63 4.5
16 36 45 54 6.0
116 400 500 600 ns 2.0 Fig.14
42 80 100 120 4.5
34 68 85 102 6.0
564 2000 2500 3000 ns 2.0 Fig.10
205 400 500 600 4.5
165 340 425 510 6.0
701 2500 3125 3750 ns 2.0 Fig.7
255 500 625 750 4.5
204 425 532 638 6.0
41 150 190 225 ns 2.0 Fig.16
15 30 38 45 4.5
12 26 33 38 6.0
41 140 175 210 ns 2.0 Fig.16
15 28 35 42 4.5
12 24 30 36 6.0

7 15 19 22 4.5

6 13 16 19 6.0
80 19 100 120 ns 2.0 Fig.6
16 7 20 24 4.5
14 6 17 20 6.0

1998 Jan 23 7

Philips Semiconductors Product specification

4-bit x 16-word FIFO register 74HC/HCT40105

SYMBOL PARAMETER

t

W

SO pulse width

HIGH or LOW

t

W

DIR pulse width

HIGH

t

W

DOR pulse width

LOW

t

W

MR pulse width

HIGH

t

rem

removal time

MR to SI

t

su

set-up time

Dn to SI

t

h

hold time

Dnto SI

f

max

maximum pulse
frequency

SI, SO using flags or
burst mode

f

max

maximum pulse
frequency

SI, SO cascaded

T

amb

(°C)

TEST CONDITIONS

74HC

+25 −40 to +85 −40 to +125

UNIT

WAVEFORMS

V

CC

(V)

min. typ. max. min. max. min. max.

120 39 150 180 ns 2.0 Fig.9
24 14 30 36 4.5
20 11 26 31 6.0
12 58 180 10 225 10 270 ns 2.0 Fig.7
6 21 36 5 45 5 54 4.5
5 17 31 4 38 4 46 6.0
12 55 170 10 215 10 255 ns 2.0 Fig.9
6 20 34 5 43 5 51 4.5
5 16 29 4 37 4 43 6.0
80 22 100 120 ns 2.0 Fig.8
16 8 20 24 4.5
14 6 17 20 6.0
50 14 65 75 ns 2.0 Fig.15
10 5 13 15 4.5
9 4 11 13 6.0

−5 −39 −5 −5 ns 2.0 Fig.13

−5 −14 −5 −5 4.5

−5 −11 −5 −5 6.0

125 44 155 190 ns 2.0 Fig.13
25 16 31 38 4.5
21 13 26 32 6.0

3.6 10 2.8 2.4 MHz 2.0 Fig.6, 9, 11
18 30 14 12 4.5

and 12

21 36 16 14 6.0

3.6 10 2.8 2.4 MHz 2.0 Figs 6 and 9
18 30 14 12 4.5
21 36 16 14 6.0

1998 Jan 23 8