Philips 74hc hct253 DATASHEETS

INTEGRATED CIRCUITS

DATA SH EET

For a complete data sheet, please also download:

•The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications

•The IC06 74HC/HCT/HCU/HCMOS Logic Package Information

•The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines

74HC/HCT253

Dual 4-input multiplexer; 3-state

Product specification
File under Integrated Circuits, IC06

December 1990

Philips Semiconductors Product specification

Dual 4-input multiplexer; 3-state 74HC/HCT253

FEATURES

• Non-inverting data path

• 3-state outputs for bus interface

• and multiplex expansion

• Common select inputs

• Separate output enable inputs

• Output capability: bus driver

• ICC category: MSI

The 74HC/HCT253 have two identical 4-input multiplexers
with 3-state outputs which select two bits from four sources
selected by common data select inputs (S
When the individual output enable (1OE, 2OE) inputs of
the 4-input multiplexers are HIGH, the outputs are forced
to the high impedance OFF-state. The “253” is the logic
implementation of a 2-pole, 4-position switch, where the
position of the switch is determined by the logic levels
applied to S0and S1.

The logic equations for the outputs are:
1Y=1OE(1l0.S1.S0+1I1.S1.S0+1I2.S1.S0+1I3.S1.S0)

GENERAL DESCRIPTION

The 74HC/HCT253 are high-speed Si-gate CMOS devices
and are pin compatible with low power Schottky TTL
(LSTTL). They are specified in compliance with JEDEC
standard no. 7A.

2Y=2OE(2l0.S1.S0+2I1.S1.S0+2I2.S1.S0+2I3.S1.S0)

APPLICATIONS

• Data selectors

• Data multiplexers

QUICK REFERENCE DATA

GND = 0 V; T

= 25 °C; tr= tf= 6 ns

amb

SYMBOL PARAMETER CONDITIONS

t

PHL

C
C

I
PD

/ t

PLH

propagation delay CL= 15 pF; VCC= 5 V

1I

, 2Into nY; 17 17 ns

n

to nY 18 19 ns

S

n

input capacitance 3.5 3.5 pF
power dissipation capacitance per multiplexer notes 1 and 2 55 55 pF

0,S1

TYPICAL

HC HCT

).

UNIT

Notes

1. C

is used to determine the dynamic power dissipation (PDin µW):

PD

PD= CPD× V

2

× fi+∑(CL× V

CC

2

× fo) where:

CC

fi= input frequency in MHz
fo= output frequency in MHz
∑ (CL× V

2

× fo) = sum of outputs

CC

CL= output load capacitance in pF
VCC= supply voltage in V

2. For HC the condition is VI= GND to V

CC

For HCT the condition is VI= GND to VCC− 1.5 V

ORDERING INFORMATION

“74HC/HCT/HCU/HCMOS Logic Package Information”

See

December 1990 2

.

Philips Semiconductors Product specification

Dual 4-input multiplexer; 3-state 74HC/HCT253

PIN DESCRIPTION

PIN NO. SYMBOL NAME AND FUNCTION

1, 15 1
14, 2 S
7, 9 1Y, 2Y 3-state multiplexer outputs
8 GND ground (0 V)
6, 5, 4, 3 1I
10, 11, 12, 13 2I
16 V

OE, 2OE output enable inputs (active LOW)

0,S1

to 1I

0

to 2I

0

CC

3
3

common data select inputs

data inputs from source 1
data inputs from source 2
positive supply voltage

Fig.1 Pin configuration. Fig.2 Logic symbol. Fig.3 IEC logic symbol.

December 1990 3